Doubts with rollout project.
Dear Experts,
could you please through light on a Roll out project.
My company wish to have 2 more new company codes as a part of rollout project.
My company already been implemented the HR module.
As times comes to have new entites for furthur vivid picture of hr activities.
What configuration should we do for the process of entire rollout project.
Please advice.
Regards,
V SAI
Hi Dilek/sikindar,
Tthere are no changes in the policies and calculations of the Payroll and time mgt. and other activities related to other modules.How to access the same values or parameters for the newly created company codes.What is the node to add the previous configurations with newly created comapany codes.
What are the furthur steps to proceed after creating the enterprise structure and creation of organisational structure.
What are the changes we need to make for payroll india module.
Please advice.
Regards,
V Sai.
Similar Messages
-
hi friends,
can somebody explain in a rollout project
what will happen to entp structure?
what will happen to blue print ie as is and to be
what will happen to document types will it be all the same
whether the same team will be there
what are all mandatory things in a rollout project
if it is all same, we only do the configuration for the particular country related configurations or how
thanks for answeringVarada,
In RollOut Also The ASAP methodology covers 5 stages namely:
Stage 1: Project Preparation
Stage 2: Business Blueprint
Stage 3: Realization
Stage 4: Final Preparation
Stage 5: Go Live & Support (Rollout)
Stage 1-Project preparation
The core activities of this project include:
Establish project teams
Conduct kick-off meeting to confirm the project scope
Develop Project Charter
Perform review on all technical requirements of the project
Stage 2-Business Blueprint
The objective of this stage is to obtain a clear precise understanding of the detail
functional requirements
The major activities during this stage are as follows:
Develop System functional requirements
Develop Systems data conversion and authorization strategy
Identify training needs
Determine reporting requirements
Determine interface requirements
Initiate change readiness Assessment
Stage 3: Realization
The project teams are focusing on the configuration of the SAP modules using agreed functional requirements. The core activities that are being carried out at this stage include:
Configure SAP modules/develop customized modules
Develop forms, reports and interfaces
Establish profiles for authorization
Implement data conversion and migration plan
Setup training environment
Conduct awareness program
Develop change infrastructure; conduct change management activities relating to
communication and role definition
Stage 4: Final Preparation
Among the core activities to be carried out at this stage include:
Develop cut-over and go-live plan
Develop standard operating procedures
Develop offline procedures
Conduct end-user training for users at the pilot site
Complete the preparation of the production environment
Conduct communication and acceptance program
Stage 5: Go Live & Support (Rollout)
The final stage of the project relates to the roll out.. ie nothing but GO Live..
The last phase of the implementation project is concerned with supporting and optimizing the operative R/3 System, both the technical infrastructure and load distribution as well as the business processes. Activities such as the following are carried out:
Production support facilities are defined, for example, checking system performance on a daily basis
Validation of business processes and their configuration
Follow-up training for users
Signoffs, etc.
=====
Rollout Roadmap
The Rollout Roadmap has as its goal the creation of a local productive reference system and, in the case of distributed systems, the provision of a link to a central productive system in order to, for example, set up and maintain R/3 master records.
The Rollout Roadmap speeds up the implementation process in the local units, so that depending on the enterprise's requirements entire implementation series can be carried out. Redundant project activities can thus be pinpointed and avoided. The advantages of this roadmap are:
The realization of groupwide implementation standards, through an efficient rollout in the local units
A rollback procedure for the exchange of general experiences, which can then be incorporated into the template. In this way the changes are passed on to the local units quickly and comprehensively.
refer to the links below...
http://www.sapfans.com/sapfans/asap/be_08_e.htm
http://www.edgewater.com/Industries/Manufacturing/ManufacturingCaseStudies/caseStudies_finePaper.htm
REAWRD IF U FINDS HIS AS USEFUL..
Regds
MM -
Dear Experts,
Kindly send me some info and documents on Rollout project. Need some detailed documents or explanation.
Thanks in Advance,
SenthilHi Prasanth,
Need some documents on Rollout project in connection with solution manager. or in general roll out project document like what has to done and steps to be followed like wise.
Regards,
Senthil -
HI all ,i am involving into sap hcm om,pa global rollout project for 6 countries.
om pa global rollout project for 6 countries, i have 6 company codes. how can i maintain number ranges for om objects with 6 company codes.
company code1 : om object number ranges from 1 to 10
company code2 : om object number ranges from 11 to 20
company code3 : om object number ranges from 21 to30
co code 4 : om object number ranges from 31 to 40
co code 5 : om object number ranges from 41 to 50
co code6 : om object number ranges from 51 to 60
how can i do this configuration.can you plz help me?Hi Anand,
Standard SAP doesn't allow to differentiate between organizational numbers at company codes level. I think you would need to build user exit for the same.
SPRO> Personnel Management > Organizational Management > Basic Settings > Maintain Number Ranges > Customer Enhancement (User Exit): Individual Number Assignment
I hope this information helps.
Thanks and regards,
Vivek Barnwal -
De-link PPM Item with SAP Project
Hello,
Can somebdoy throw a light on what to do in case I want to de-link a PPM-item with SAP project.This situation may rise if I want to change the project actuals going to bucket A to bucket B.As I can not change the relationship of an item with the bucket, I am looking for alternate solution where I can de-link SAP Project with SAP PPM item.
thank you!
Regards,
MahendraHi Mahendra
If you are meaning to de-link a PS Project from a PPM Item, you can from the Item navigate to the 'Relationships' tab and then on the 'object links'sub-tab select and delete the assignment:
You can also remove a cProject relationship by clicking the 'Related Objects' sub-tab
Your comment that you cannot move an Item to a new Bucket - is this because your business process does not allow you to do so? Because this is definitely possible in the system.
Let me know if you have any further questions as I am not sure I have addressed your question
Regards
C -
Hi,
One of my user is facing issue in creating new time sheet,
"The time sheet creation failed, because of problems with the project server or with data validations".
This issue is coming to only few members out of 10000 members.
Note: For the same user, can able to do in other machines. only the problem in his machine. Have ran the office diagnostics, but still the problem persists.
Is any add-on's/any settings need to update in IE. Could any one please help me on how to fix this issue?
Many thanks in advance.I would check the compatibility settings in IE etc, or try another browser (chrome, safari etc.)
Ben Howard [MVP] | web |
blog | book -
How do I save Icon templates with the Project files?
My project files are stored in a folder, say, "My Documents\LabVIEW\My Project", and this folder, in turn, is saved under (Sub)Version Control. I'd like to include a sub-folder called "Icon Templates" that could contain the icon templates I'm using in this project, but they seem to be "forced" into "My Documents\LabVIEW Data\Icon Templates" (almost the same, but the "owning folder" is different).
Is there any way to change, preferably on a Project-by-Project basis, the default location for Icon Editor templates? I tried to figure this out, and saw that one could change where "3rd Party" templates were stored, but that didn't seem to do anything (maybe because I don't understand the concept of a "3rd Party"?).
An important (to me!) reason to accomplish this is that I want to commit my new icons when I commit the rest of the Project, and have them appear when I checkout the project on another machine (or do an update from the Repository).
Suggestions welcomed ...
Bob SchorWell, I thought of this as well. I did change Default Data Documents (which seems to be where Icon Editor expects to find its Templates file) to My Documents\LabVIEW (instead of LabVIEW Data), and that worked (sort of). But that still doesn't solve my problem. I have multiple projects -- My Docs\LabVIEW\Project 1, say, and My Docs\LabVIEW\Project 2, and want to have a specific set of icon templates for each stored, say, as Project 1\Icon Templates and Project 2\Icon Templates.
My problem is two-fold. First, there is a setting in Icon Editors, Tools, that seems to be designed to let you designate where your "special" templates are located, which I've set to, for example, My Docs\LabVIEW\Project 1\Icon Templates. However, when using the Icon editor, these templates never appear! It's as though it's still "locked" into the "3rd Party" sub-folder of the parent Icon Templates folder. Second, even if this worked (which it doesn't), is there a way to "embed" this setting as part of Project so that the settings "stay with the Project" (and can thereby be customized)? One important reason to do this is to simplify organizing Projects and folders on disk -- I keep them "together" (use the same structure for both, so a Project is contained, on disk, inside a single set of nested folders), which greatly simplifies and facilitates using Version Control to manage development.
Thanks for the reference. I didn't know about all of the symbolic names. It does appear that they are only used in the VI Search Path entry, correct?
Bob Schor -
Error while creating sales order with network/project
Dear All,
we are getting the following message while creating a sales order with assembly processing with network/project system .
The standard Network used as a reference contains assignments to a standard WBS. However you have maintained WBS assignments manually.which assignment should be used?
manually maint pre-defined
reward points are assured for valuable help.
thanking you
Best regards,
R.SrinivasanDear Murali,
Thankyou very much for your reply.We have checked for these things which you have mentioned.
ie
Assignment of Standard WBS in the Standard network and WBS Assignment of Operastional network.We are still getting this error.
Kindly let me know What are the other possibilities for this error.
Thanking you,
Best regards,
R.Srinivasan -
Doubt with creation of Model in the application Webdynpro Java
Good Morning,
I have the following doubts with the fields when i am creating a models in WebDynpro Java
Model Package
Source Fólder
Default logical system name for model instances
Default logical system name for RFC metadata
Logical Dictionary
Dictionary Type Package.
Can Help me?
Kind RegardsHi,
Please check this link:
[https://wiki.sdn.sap.com/wiki/display/WDJava/FAQ%20-%20Models%20-%20Adaptive%20Web%20Service]
Thanks and Regards -
I renamed my iMovie folder with my projects in it, and now iMovie won't open them
I renamed my iMovie folder with my projects in it and now iMovie won't open them.
Can you rename it back & try it?
-
FCPx crashes as soon as I click export movie. It happens with every project. It happens even on a small 10 sec test video. I have been using FCPx for over a year with no problems, but today this is happening. I am suspecting a virus or something. I have done nothing new to change any settings. Should I uninstall and re-install?
Hi there,
First off, the point of converting is to make your rendering times nonexistent, not longer. Make sure you're converting to match your sequence settings exactly.
You might try basic troubleshooting procedure described here:
http://fcpbook.com/Misc1.html
If it happens again you should remove all components of the application using the free FCS Remover and reinstall. -
Numbers 3.2 has changed too much, it doesn't work with my project anymore. 1) The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming), 2) I used to be able to duplicate a folder within my sheet panel window by simply clicking on a folder and hitting Command D, but that doesn't work now so it looks like I'll have to spend even more time to recreate the same tables that used to be easily duplicated, and 3) I can't choose fill colors that matched my project anymore because there are only limited choices available now. And these are only the changes that I'm aware of. I am very disappointed and frustrated. Whatever the motivation was to limit Numbers 3.2, I want the previous version back. How do I revert back to the previous version I was using?
The sheet panels used to be on the left hand side and easily reviewable and searchable, but now they are on the top and it's harder to find a specific folder without scrolling (too time consuming),
You can scroll more quickly between sheets if you don't use the left-right triangles, but instead move the cursor up into the bands with the "tabs" and drag right or left.
Also, if you have a lot if sheets for which you want a quick vertical list, then you can try the following have something like this pop up (showing your sheet names automatically) whenever you hit a keyboard shortcut (in my case shift-command-j):
This is done via a Jump to Sheet Automator Service (Dropbox download). To install just doubleclick the .workflow package and (if needed) click 'Download Anyway' in System Preferences > Privacy & Security.
This will cause a new item to appear in your Numbers > Services menu. Then, if you want a keyboard shortcut, go here in System Preferences and add one:
You can rename or remove the service by holding down the option key in Finder and choosing Go > Library > Services. You can also view the AppleScript contaned within the service by opening the .workflow package in Automator.
This particular service jumps to the first cell of the first table of the sheet you choose from an automatically generated list of all sheets in the current document.
SG -
The project in Premiere Pro CC for Mac was trimmed by project mahager, then when I open trimmed project, clips in sequence was in nonexistent part of original video file.
Like this:
What is that? How can I fix it?
thank you in advance.
YermekThis is a problem I have from time to time with Trimmed Projects. Even though the media is there, for some reason Premiere can't see it. It's maddening because it's very hard to duplicate and thus troubleshoot. But when it happens, there's no sensible explanation.
Our discussion on this problem is here:
Re: Trimmed Project sequence not working
Here's one thing you can try that sometimes works:
1. take all your media out of the trimmed project folder and put it in a different folder somewhere else
2. launch the trimmed project
3. the offline window comes up automatically with a list of missing clips. UNCHECK the align timecode box and manually reconnect all the trimmed clips.
4. zebra stripes gone. sequence plays. -
Inventory management configuration for Rollout project.
Hi all,
We have created new plant using Copy function (using reference Plant).
Kindly let me know
what are other configuration required for Inventory management in new plant?
Please provide if any check list available for Roll-out project.
Thanks
SAP-PQHi
1) If your plant is excise then you have to create excise group for that plant and G/L setting for that excise group
2) You have to extend your material in new plant
3) check your material type update for quantity and value update for your new plant in t-code OMS2
and check following link
[Rollout project;
Regards
Kailas Ugale -
i upgraded from the old imoive(yellow star) to the new iMovie(purple star) , in the old iMovie when i was done i was able to share my project to idvd, i don't see how to do this on the new iMovie. Does anyone know how to burn a dvd with your project from the new iMovie(purple star)? if can't be done can i export my project to the old iMovie and burn to idvd like i used to?
i did what you said and saved the file to my desktop, but how do i get it in idvd now, when i open idvd and point to the file on the desktop either by open existing project or trying to open a new project the file is greyed out and i can't select it
Maybe you are looking for
-
"Wireless Radio is not Functioning" when Diagnostic Tool is run
I recently unplugged my HP Photosmart Premium C309a and relocated it to a new shelf beside my main computer. Wireless networking worked just fine before the move, and now it won't detect any networks to connect to. I've run the Wireless Network Tes
-
Exception Occur while Using Microsoft Visual Studio for Debugging JNI app.
Hi all, My JNI program works fine. And also Visual Studio IDE allow to debug C++ program properly. But after each instance of program executation(Under Visual Studio IDE) I am getting following log file. ==============================================
-
My ipod 5 is disabled and cant restore how do i do it
My Ipod touch (5th generation) is disabled and says i have to connect it to itunes and i try to restore it and it never does.What might be the problem or how can i fix it?
-
Macbook and iOS won't connect with bluethooth
Hi folks, I have a 2010 Macbook White edition, that today I upgrade to Mavericks 10.9.4, previously on 10.7.5. I have iPhone 5s, with latest iOS (7.1.2) Before updating to Mavericks, I had no issues with bluetooth pairing and syncing, etc. between th
-
I have tried dragging and dropping and have also tried creating a file called iPhone.