Inventory management configuration for Rollout project.

Hi all,
We have created new plant using Copy function (using reference Plant).
Kindly let me know
what are other configuration required for Inventory management in new plant?
Please provide if any check list available for Roll-out project.
Thanks
SAP-PQ

Hi
1) If your plant is excise then you have to create excise group for that plant and G/L setting for that excise group
2) You have to extend your material in new plant
3) check your material type update for quantity and value update for your new plant in t-code OMS2
and check following link
[Rollout project;
Regards
Kailas Ugale

Similar Messages

What is the process for rollout projects and upgradation projects

Hi All,
Hope you all are doing well.
I am a new bee in oracle apps. Just would like to understand what is the process for rollout projects and upgradation projects and difference between them.
Please help me. Thanks in advance.
Regards,
MM

Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
Where Technology Meets Talent

Unable to click 'Set and save as my Active Configuration for this project'

Environment: OWB 11.1.0.6 Client running on Windows XP Pro SP3 repository and targets on AIX (IBM UNIX).
I have created a new Configuration under a specific Project and I'd like to make this configuration the default whenever I login and select this Project.
There is a check box when I right click the Configuration and select 'Open Editor' that says 'Set and save as my Active Configuration for this project' but when I select the check box and try to click on 'OK' there is no response from the popup window and I have to click 'Cancel' to get out of the popup.
Any ideas on why this is happening and how to get around it??
Thanks very much.
-gary

Si
Good catch!! Restarting the app???? What a waste of time!! :-(
When I went back in the box was already checked! It must have known I was pissed at it!! :-)
Thanks for the help.
-gary

Inventory management configuration ?

hii
Can some body explain me about the configuration part for inventory management.
Like
Goods receipt
Goods issue
Transfer posting
Physical inventory
......etc
Explain me in short without any links ...
Thanks

There are almost an infinite number of ways to configure IM, depending on the business processes your client intends to implement.
Start with SAP Best practices config guide for Materials Management.
http://help.sap.com/bp_bl603/BBLibrary/Documentation/104_BB_ConfigGuide_EN_IN.doc
Other BP guides at Best Practices (India)
http://help.sap.com/bp_bl603/BBLibrary/Content_Library_BL_EN_IN.htm
Edited by: Afshad Irani on Jul 19, 2010 10:20 AM

Change Management Configuration for SolMan 4.0 SP13

Hi SolMan Experts,
Recently, we have build SolMan4.0. As of now, we have configured this for System monitoring and EWA reports.
Now, we are planning to configure for Change Management.
Could you please provide me the useful documents for CHANGE MANAGEMENT configuration on SolMan4.0.
Thanks in advance!
Regards,
Hari.

Hello
Follow the same steps which mentioned for SP12, as per my understanding there is not much difference in basic configuration of solution manager 4.0.
Create systems in SMSY, RFC connections, create logical system, create project, activate charm, these are the basic steps.
You will get information on this on saphelp and also go through the solman rkt (service.sap.com/rkt),
sap market place  sap support infrastructure  solution manager  media library (u will find all documents)
Even they gave given the charm configuration guide for SP12, u will find that in technical papers.
Hope this will help
Regards,
Sharmishtha

Provident fund configuration for coal project

Dear all
my requirement is to maintain pf rates for our coal mines.we have already maintained pf rates for our organization i.e plant .but now we have created new pf id for coal project.and we have different calculations for coal project employees whom we have assigned new pf id.
ex:empcode 102184
    pa30->infotype->587->Provident Fund Trust ID (Now its RCMP) from macrh 01.2014
    pa30->infotype->587->Provident Fund Number (New pf code number)   ex-YZZZZ
before this we have
   pa30->infotype->587->Provident Fund Trust ID (Now its RPCL) from macrh 01.2014
    pa30->infotype->587->Provident Fund Number   (old different pf code number) ex- XTRYY
A/C Number
Emp Name
EMP CODE
S/W
salary
PF CONTRIBUTION (12%)
PENSION CONTRIBUTION
VOL. CONTRIBUTION (2%)
TOTAL ADDI. PENSION CONTRIBUTION (ONE INCREMENT DIVIDED BY 12 MONTHS )
ADMIN. CHARGES (3%)
Employee (10.84%)
Employer (10.84%)
Employee (1.16%)
Employer (1.16 %)
CMPF/123/456
XYZZZZZ
1102184
173,830
18843
18843
2016
2016
3477
2188
1252
how can i configure these in my system.
we have already differnt calcualtion for RPFC emp of our company.
please guide .
thnxs
gaurav

i have done it with separate trust id-RCMP.but i have assigned same wage type as i did for older one.(RPFC case).should i need to create new wage type and create PCR for separate pf trust id.
trust master details:pleas tell me .what to do for this issue and how it can be resolved.
RCMP
CMPF
RPFC (Regional Provident Fund Commsioner)
/3F1
/3F2
/3F3
/3F4
/3F7
/3F8
/3F9
RPFC
RPFC Govt
RPFC (Regional Provident Fund Commsioner)
/3F1
/3F2
/3F3
/3F4
/3F7
/3F8
/3F9

Document Management System for Struts Project

I am doing a J2EE project in struts, in which i need to implement document management system containing the following features :
1. File Upload/Download
2. File Sharing
3. Giving Permissions to Files, etc
Instead of building a DMS from the scratch I am looking for a open source DMS solution which I can customize as per my needs and implement in my project. Since my project is based on struts, I am looking for a struts based solution.
Please tell me if there are any good open souce DMS like these.

hi jitesh,
now i am doing the same project which you have done with struts framework. please let me know the solutions for the project.
please reply to my mail id = [email protected]
thanks.
nandha.

In-Band Management configuration for f5100 array from T5440 on Solaris 10

Hi All,
I am trying to configure in-band management for storagetek array Sun Storage F5100 from T5440 server on Solaris 10.
OS Installed on the server: Solaris 10 10/09
Hardware : T5440
Array : Sun Storage F5100
Sun Storage F5100 have 20 FMODs which can see from format output. But In-Band management don't work, i want to manage it by CAM.
/dev/rdsk/c2t0d0s2
/dev/rdsk/c2t1d0s2
/dev/rdsk/c2t2d0s2
/dev/rdsk/c2t3d0s2
/dev/rdsk/c2t4d0s2
/dev/rdsk/c2t5d0s2
/dev/rdsk/c2t6d0s2
/dev/rdsk/c2t7d0s2
/dev/rdsk/c2t8d0s2
/dev/rdsk/c3t0d0s2
/dev/rdsk/c3t1d0s2
/dev/rdsk/c3t2d0s2
/dev/rdsk/c3t3d0s2
/dev/rdsk/c3t4d0s2
/dev/rdsk/c3t5d0s2
/dev/rdsk/c3t6d0s2
/dev/rdsk/c3t7d0s2
/dev/rdsk/c3t8d0s2
Below are the packages i installed:
host_sw_solaris_6.6.0.11
SMagent-SOL-90.01.02.05.pkg
SMruntime-SOL-90.60.02.01.pkg
once after i installed the above packages i am getting below error
SANtricity Storage Manager Agent, Version 90.01.02.05
Built Wed May 06 06:21:07 CDT 2009
Copyright 2009 Sun Microsystems Inc. All rights reserved. Use is subject to license agreement.
Checking device /dev/rdsk/c0t2d0s2 : Skipping
Checking device /dev/rdsk/c0t3d0s2 : Skipping
Checking device /dev/rdsk/c2t0d0s2 : Skipping
Checking device /dev/rdsk/c2t1d0s2 : Skipping
Checking device /dev/rdsk/c2t2d0s2 : Skipping
Checking device /dev/rdsk/c2t3d0s2 : Skipping
Checking device /dev/rdsk/c2t4d0s2 : Skipping
Checking device /dev/rdsk/c2t5d0s2 : Skipping
Checking device /dev/rdsk/c2t6d0s2 : Skipping
Checking device /dev/rdsk/c2t7d0s2 : Skipping
Checking device /dev/rdsk/c2t8d0s2 : Skipping
Checking device /dev/rdsk/c3t0d0s2 : Skipping
Checking device /dev/rdsk/c3t1d0s2 : Skipping
Checking device /dev/rdsk/c3t2d0s2 : Skipping
Checking device /dev/rdsk/c3t3d0s2 : Skipping
Checking device /dev/rdsk/c3t4d0s2 : Skipping
Checking device /dev/rdsk/c3t5d0s2 : Skipping
Checking device /dev/rdsk/c3t6d0s2 : Skipping
Checking device /dev/rdsk/c3t7d0s2 : Skipping
Checking device /dev/rdsk/c3t8d0s2 : Skipping
The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
Jul 23 13:56:47 sol10 SMagent: The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
As per sun documentation i ran the below commands, but still i am getting above error.
# setenv LD_LIBRARY_PATH /opt/SMgr/agent
# java -classpath /opt/SMgr/agent/SMagent.jar devmgr.versioned.agent.DeviceIdentifier | grep "Volume Access"
But any output with above commands.
Any help would be really help ful.
Thanks,
gebilong

Make sure the mapping to Access Group has not been deleted.
Use the command /opt/SUNWsefms/bin/lsscs list -a array mappingYou must see samething like
Volume:Access LUN: 31mapped.via mapped.via.default.groupmapped.target.type mapped.via.default.group Permission: Read Only
...If you don't see this recreate mapping
/opt/SUNWsefms/bin/lsscs map -a array -l 31 volume Accessand restart agent
/etc/init.d/SMagent start

In-Band Management configuration for 2530 array from T5120 on Solaris 10

Hi All,
I am trying to configure in-band management for storagetek array 2530 from T5120 server on Solaris 10. I could able to connect the array from CAM software and it is showing as out-of-band. I can able to change the array name and IP address also. But when i try to configure In-Band Management i am having problems.
OS Installed on the server: Solaris 10 5/08
Hardware : T5120
Array : Storage Tek 2530
Below are the packages i installed:
SMagent-SOL-90[1].00.00.06.pkg
SMruntime-SOL-10[1].10.02.00.pkg
once after i installed the above packages i am getting below error
"SANtricity Storage Array Host Agent, Version 90.00.00.06
Built Wed May 23 09:02:26 CDT 2007
Copyright (C) 1999-2007 LSI Logic Corporation. All rights reserved.
Checking device /dev/rdsk/c1t0d0s2 : Skipping
The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
The Host Context Agent did NOT start because 0 controllers were found.
Oct 9 19:51:10 proto-hd1 SMagent: The SMagent service attempted to start but terminated. Possible causes include: [1] The access volume is disabled in NVSRAM. [2] No controllers with compatible firmware were found. [3] The default logical unit number (LUN) assigned to the access volume (typically 7 or 31) is not in the range supported by the host or is already in use by the host for another device. See your storage management documentation for more details.
Oct 9 19:51:10 proto-hd1 SMagent: The Host Context Agent did NOT start because 0 controllers were found."
As per sun documentation i ran the below commands, but still i am getting above error.
# setenv LD_LIBRARY_PATH /opt/SMgr/agent
# java -classpath /opt/SMgr/agent/SMagent.jar devmgr.versioned.agent.DeviceIdentifier | grep "Volume Access"
Any help would be really help ful.
Thanks,
Raja

Make sure the mapping to Access Group has not been deleted.
Use the command /opt/SUNWsefms/bin/lsscs list -a array mappingYou must see samething like
Volume:Access LUN: 31mapped.via mapped.via.default.groupmapped.target.type mapped.via.default.group Permission: Read Only
...If you don't see this recreate mapping
/opt/SUNWsefms/bin/lsscs map -a array -l 31 volume Accessand restart agent
/etc/init.d/SMagent start

Questionnaire for rollout project

Hi,
I need to prepare SD questionnaire for roll out project.
Please help me regarding this.
urgent.
Regards
Prabudh

Hi
1) If your plant is excise then you have to create excise group for that plant and G/L setting for that excise group
2) You have to extend your material in new plant
3) check your material type update for quantity and value update for your new plant in t-code OMS2
and check following link
[Rollout project;
Regards
Kailas Ugale

Records Management: Model for customer - project - records hierarchy

Hello,
starting with RM I just created a static structure for customer data. This works pretty well at the beginning level.
Now I would like to add a hierarchy to the customer data. The next level in the structure should be projects with the project that are associated with the customer. The projects are managed with PS. So every time a PSP element is created on a special level will automatically create some model nodes with elements (offer, order, .. ). Under the level of the projects there should be records like offer, order, ..
Could someone could give me some hints how to solve this, please? What is the best practice for something like that?
Is this the right forum for this question?
Thanks a lot,
Vanessa

Dear Vanessa,
Unfortunately, we have not been able to get an exclusive forum for RM hence, a post anywhere with Records Management or Case Management will be good(I generally search for questions on these keywords).
For your question - adding a new sub-structure to the same record or case everytime there is a project etc is created is technically not feasible. Even if you make this feasible by programming it will be very difficult to maintain. I would recommend to have an object(record or case) for every sub-structure that needs to be created with a separate record model for the sub-structure.
For eg - if you need to create & add a new sub-project to a main project every time for an event, then instantiate an object(record/case) & then add it to the project record.
Some points to consider - recommendation is to not to have more than 1000 objects linked to any one folder as after that time consumed to expand the folder becomes visibly high for the user.
Hope this helps...
Best Regards,
Pragya

Inventory management software for Macs

Does anyone know of a free one? I have an I.T. audit I need to do, and it's an all-Mac house. I have a few Macs myself, but I've never had to do an audit on an all-Mac network. I need things such as patch levels, software inventory, etc. We usually use GFI LANguard for Windows machines, but it doesn't do a good job with Macs or Linux machines. Thank you!

For autonomous, Cisco has the WLSE:) or you can look at 3rd party management tools like Wavelink http://www.wavelink.com/solutions/management.aspx
Scott

Solution manager configuration for EHP4 install (Product Version Problem)

Hi guys!
I'm new on SAP and SDN is a help all days and this time i really need some help from you guys!
Im installing EHP 4 and need the XML Stack file, so i go to the solution manager to generating them. But after configuring the logical components, make the associations, etc. on create maintenence transaction, the product version dropdownlist is empty...
It is configured but it dont appears... Anyone had this problem before and could give me some help!
I will appreciate that!
My regards,

Hi,
In SMSY, the system should have product version as SAP ERP 6.0.
Next the logical component created for ECC Server should also reflect this version.
The solution you create in DWSP should include this logical component via the Solution Landscape definition. Here again the logical component should show the product version.
If all above are in place, the MOPZ for the respective solution should have the product version list populated.
Regards,
Srikishan

Solution manager configuration for SRM

Hi all
we are goin to configure SAP SRM 5.0. we need to configure standard business scenarios in solution manager for the same.can somebody provide relevant links and documents regarding where to find these in solution manager and how to go about this?this would be really helpful.points would be awarded immediately.

Hi Harsa,
Here you can find the Webex recorded sessions
https://websmp207.sap-ag.de/~sapidb/011000358700000429402008E
Hareesha

How to manage source for java project using eclips?

Hi,We use TFS 2013 and VS 2013 for source control ,now we want to start mobile app using eclips,
How to control source of that project,How we can have features of tfs source control on that type of project such a mobile that use eclips.
thanks
Thanks. Bahar Ghadami Web Developer And Technical expert

Hi Bahar,
You can manage your source code with both Eclipse and My Eclipse.
Please follow this link to install the Plugin (Team Explorer Everywhere) to manage your source code.
http://msdn.microsoft.com/en-us/library/hh301122.aspx

Inventory management configuration for Rollout project.

Similar Messages

Maybe you are looking for