Doughts on Infoset Joins with Cube and DSO in BI 7

Dear All,
I have a droughts on Infoset Joints.
I am working on a BI Query where I need to take 0Employee from Cube and Employee position time he holds in an Organization is coming form DSO, Apart for this I also have other requirement such as Address fields , Visa Status , are all coming from DSO.
I have created a Infoset for this where
1st is Cube and its 0Employee is linked to all DSO Employee and also Employee position I have linked with DSO and all are inner joints.
1>My doughty is that will this work with inner joins or I have to use other joints.
2>Is sequence of Data Target is correct
which is
1> Cube and in 2> all DSO in Parallel.
Please guide me on joints and sequence.
Thanks V V much in Advance,
Regards,

Hi,
Check these links.
http://help.sap.com/saphelp_nw04s/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
http://help.sap.com/saphelp_nw04/helpdata/en/9c/6b7538c9a8ee45e10000009b38f8cf/frameset.htm
if this helpa assign points.
Thanks.....
Vasu.....

Similar Messages

Regarding Info cube and DSO

Hi,
Generally reporting will be done on Info Cube rather than DSO.
Suppose If we assign the same data source to Info Cube and DSO then both contains the same data.
Info cube have additive and aggregated functionality where DSO have the overwrite functionality .
Are we using cube for this functionality only ?
What about the Dimensions in Cube how they differ from data fields and key fields in DSO when we are developing same Bex Report on both ?
Please advice me .
Thanks in advance.
Thanks & Regards,
Ramnaresh.p

It is hard to compare Cube and DSO.
Both thier own usage.
1. InfoCube is always additive, while DSO supports overwrite functionality.
2. In InfoCube, combination of all the characteristic value is a Key in the Fact Table, while in ODS, you can specify your own Key Fields based on which you want to generate unique record in the DSO.
3. DSO supports many delta modes like D, R, N, X, after image, before image, while cube does not support all the modes. You can not delete the record based on the key from the cube by just loading the data. While DSO automaitcally deletes the record from active table and generates the reverse entry for Cube.
4. DSO is a flat structure and therefore, it is used to store information at detail level, while cube is used to store information at aggregated level.
So both the structures are very much different from each other. One can replace other at some places, but both the objects have thier own functionality.
- Danny

How to join a cube and a Attribute of it's Char. without navigation

How to join a　cube and a Attribute of it's Characteristic
without navigation Attribute.
example
① Cube X：(data)
・0material： apple
・0company： firmA
・Sales：$100
②ODS(marerial-company master)
(Key)0material： apple
(Key)0company： firmA
・Sales-Employee：Mr.Y
↓
Mr.Y：$100
Now,Cube X has many realdata.
So, we do not hope to repair Cube X itself.

Hello sakurai
1. you should use multiprovider on ODS and cube to get the desired field .
2. Infoset is a flat structure you use for characteristic reporting, in you case you need attribute in reporting so can use it.
3. If u r in BI 7 , add extra field in cube and populate by loopback process....
Award points if help...
Revert back in case of any doubt
Thanks
Tripple k

Creation of cube and dso in sap bi 7.0

This topic has ben discussed here often. Kindly search the forums before posting a new thread. Unfortunately I would have to lock this thread.
Hi
Can any body tell me the how to create the cube as well an dso in bi 7.0 version thougt i how to create cube and ods in sap bi 3.5 version but i want to update my knowledge more what are main diif b/w 3.5 and 7.0 i had ask this question further also but i will be very greate full if any give me own hand made Answer rather than the for diff b/w 3.5 and biw 7.0
regards
gurkiran
Edited by: Dinesh Lalchand on Feb 12, 2009 12:53 PM
Edited by: Dinesh Lalchand on Feb 12, 2009 12:55 PM

Hi ,
I am trying to migrate the Transaction data sources before moving into the DEV from Sandbox.
So i have to delete the existing TR/UR's and trying to create the transformation, but while creating transformation fields mapping is not happend automatically. (For manul field mapping the transaction data is the time taking process)
We are using the spk 8 . Please let me know any one has faced the above problem .
Regards
Jose

ILBC calls via SIP Trunk with CUBE and CUCM7

hi there,
our SIP Provider offers the IBLC codec which promises to provide better quality compard to G.729.
I'm using this scenario:
IP-Phone(G711) --- CUCM7 --- (SIP-Trunk1) --- CUBE --- (SIP-Trunk2) --- Provider
Everything workes unless I'm configuring IBLC at the provider and on trunk2.
I have the CUBE router acting as a trancoding device and also specified IBLC as codec to be handled.
SIP trunk 2 was placed in a region with IBLC as codec.
On the trunk configuration in CUCM the media ressource group with XCODE capability is configured
Transcoding workes between two IP Phones in different regions with different codecs within the intranet.
Unfortunately the CUBE router doesn't seem to use the transcoder to change internal G711u calls into IBLC codec
so calls are blocked by the CUBE device:
deb ccsip calls
for incoming call:
.Mar 13 17:43:17.231: //145/BDB403DD8134/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x4AE7AC98
State of The Call        : STATE_DEAD
TCP Sockets Used         : NO
Calling Number           : 0237892992
Called Number            : 036677725231
Source IP Address (Sig ): 10.100.100.50
Destn SIP Req Addr:Port : <IP SIP Provicer>
Destn SIP Resp Addr:Port : <IP SIP Provicer>:5060
Destination Name         : <IP SIP Provicer>
.Mar 13 17:43:17.231: //145/BDB403DD8134/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream             : 1
Negotiated Codec         : ilbc
Negotiated Codec Bytes   : 0
Nego. Codec payload      : 255 (tx), 255 (rx)
Negotiated Dtmf-relay    : 6
Dtmf-relay Payload       : 101 (tx), 101 (rx)
Source IP Address (Media): <IP CUBE>
Source IP Port    (Media): 0
Destn IP Address (Media): <IP SIP Provicer>
Destn IP Port    (Media): 22022
Orig Destn IP Address:Port (Media): [ - ]:0
.Mar 13 17:43:17.231: //145/BDB403DD8134/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC)    : 65
Disconnect Cause (SIP)   : 488
(Output lookes similar to outgoing calls)
I set up ccm on cube and assigned dsp ressources without success:
Here are the relevant configuration parts:
voice class codec 1
codec preference 1 iblc
voice service voip
address-hiding
allow-connections sip to sip
allow-connections h323 to sip
allow-connections sip to h323
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
h323
sip
header-passing error-passthru
no update-callerid
midcall-signaling passthru
privacy-policy passthru
voice-card 0
dspfarm
dsp services dspfarm
dial-peer voice 40991 voip
description *** Incoming from SIP-Provider
destination-pattern 03667772523.%
session protocol sipv2
session target ipv4:<IP_of_CUCM>
voice-class codec 1
voice-class sip asserted-id pai
voice-class sip privacy-policy passthru
dtmf-relay rtp-nte
fax-relay sg3-to-g3
fax rate 14400
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
ip qos dscp cs5 media
ip qos dscp cs5 signaling
sccp local GigabitEthernet0/0
sccp ccm 10.100.100.50 identifier 11 version 4.1
sccp
sccp ccm group 11
description *** lokaler CCM fuer Codec-Konvertierung von SIP/DUS.NET
associate ccm 11 priority 1
associate profile 21 register DE_WGT_MTP02
dspfarm profile 21 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec ilbc
maximum sessions 10
associate application SCCP
telephony-service
sdspfarm units 1
sdspfarm transcode sessions 10
sdspfarm tag 1 DE_WGT_MTP02
max-ephones 30
max-dn 30
ip source-address 10.100.100.50 port 2000
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Mar 14 2010 02:10:34
sh sccp
SCCP Admin State: UP
Gateway Local Interface: GigabitEthernet0/0
        IPv4 Address: 10.100.100.50
        Port Number: 2000
IP Precedence: 5
User Masked Codec list: None
Call Manager: 10.100.100.50, Port Number: 2000
                Priority: N/A, Version: 4.1, Identifier: 11
                Trustpoint: N/A
Call Manager: 10.1.1.55, Port Number: 2000
                Priority: N/A, Version: 7.0, Identifier: 10
                Trustpoint: N/A
Transcoding Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.100.100.50, Port Number: 2000
TCP Link Status: CONNECTED, Profile Identifier: 21
Reported Max Streams: 20, Reported Max OOS Streams: 0
Supported Codec: g711ulaw, Maximum Packetization Period: 30
Supported Codec: g711alaw, Maximum Packetization Period: 30
Supported Codec: g729ar8, Maximum Packetization Period: 60
Supported Codec: g729abr8, Maximum Packetization Period: 60
Supported Codec: g729r8, Maximum Packetization Period: 60
Supported Codec: ilbc, Maximum Packetization Period: 120
Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization Period: 30
sh dspfarm dsp all
SLOT DSP VERSION STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED
0    1   26.3.4   UP     N/A FREE xcode 1      -         -         -
0    1   26.3.4   UP     N/A FREE xcode 1      -         -         -
0    2   26.3.4   UP     N/A FREE xcode 2      -         -         -
0    2   26.3.4   UP     N/A FREE xcode 2      -         -         -
0    2   26.3.4   UP     N/A FREE xcode 2      -         -         -
0    2   26.3.4   UP     N/A FREE xcode 2      -         -         -
0    2   26.3.4   UP     N/A FREE xcode 2      -         -         -
0    2   26.3.4   UP     N/A FREE xcode 2      -         -         -
1    1   26.3.4   UP     N/A FREE xcode 1      -         -         -
1    1   26.3.4   UP     N/A FREE xcode 1      -         -         -
1    1   26.3.4   UP     N/A FREE xcode 2      -         -         -
1    1   26.3.4   UP     N/A FREE xcode 2      -         -         -
1    1   26.3.4   UP     N/A FREE xcode 2      -         -         -
1    1   26.3.4   UP     N/A FREE xcode 2      -         -         -
Thanks in advance,
David

Hi there,
Just wondering whether you ever got this resolved? I seem to have a very similiar problem.
Regards
Karen

Problem in join with hrp1000 and hrp1001???

Hi all, I am pasting code sAmpLE, i am having problem with join, without join the query is working. Help out.
IF per_no IS NOT INITIAL.
    SELECT objid sobid objid INTO TABLE lt_st_p1
      FROM hrp1001 WHERE otype EQ 'P' AND objid IN per_no
      AND plvar EQ lv_plan_version AND rsign EQ 'B' AND relat EQ '008' AND istat EQ '1'
       AND subty EQ 'B008' AND sclas EQ 'S'.
   LOOP AT lt_st_p1 INTO ls_st_p1_tem.
     ls_st_p1_tem-sobid1 = ls_st_p1_tem-pernr.
     MODIFY lt_st_p1 FROM ls_st_p1_tem TRANSPORTING sobid1.
   ENDLOOP.
    check lt_st_p1 is not INITIAL.
    SELECT h1objid h1sobid h0~stext INTO TABLE lt_st_p1_temp
      FROM hrp1001 AS h1 JOIN hrp1000 as h0 on ( h1objid eq h0objid and h1rsign eq h0otype )
      FOR ALL ENTRIES IN lt_st_p1
      WHERE h1otype EQ 'O' AND h1sobid = lt_st_p1-sobid
      AND h1plvar EQ lv_plan_version AND h1relat EQ '003'
      AND h1rsign EQ 'B' AND h1istat EQ '1' AND h1subty EQ 'B003' AND h1sclas EQ 'S'
I want to get the stext of the braNCH. THE lt_st_p1 is having the emp id and position. and i want to get branch , position and stext( of branch) in lt_st_p1_temp by the help of join. I am implementing this qauery, but is getting subrc 4, what is the problem in this , please rectifuy if any problem found ?

You may want to change:
check lt_st_p1 is not INITIAL.
to
check lt_st_p1[] is not INITIAL.
This depends on whether or not the internal table was defined with a header line.
Rob
Edited by: Rob Burbank on Jan 2, 2012 2:45 PM

JPA Criteria : LEFT JOIN with an AND condition

Hi all,
I have a question regarding JPA criteria.
Here is my JPA query :
CriteriaBuilder criteriaBuilder = em.getCriteriaBuilder();
CriteriaQuery<Long> criteriaQuery = criteriaBuilder.createQuery(Long.class);
Root<Email> emailRoot = criteriaQuery.from(Email.class);
criteriaQuery.distinct(true);
Predicate globalCondition = criteriaBuilder.equal(emailRoot.get(Email_.type), EmailType.in);
Predicate responseMandatoryCondition = criteriaBuilder.equal(emailRoot.get(Email_.responseMandatory), true);
Predicate typeCondition = criteriaBuilder.notEqual(emailRoot.join(Email_.emailsOut, JoinType.LEFT).get(Email_.responseType),ResponseType.response);
globalCondition = criteriaBuilder.and(globalCondition, responseMandatoryCondition);
globalCondition = criteriaBuilder.and(globalCondition, typeCondition);
em.createQuery(mainCriteria.where(globalCondition)).getSingleResult();
Here is the result of this query :
SELECT DISTINCT email0_.ID AS col_0_0_
FROM EMAIL email0_
LEFT OUTER JOIN email emailso1_ ON email0_.ID = emailso1_.ID_EMAIL_IN
WHERE email0_.TYPE = 'in'
AND email0_.RESPONSE_MANDATORY = true
AND emailso1_.RESPONSE_TYPE <> 'response'
LIMIT 0 , 30
And here is the request I needed :
SELECT DISTINCT email0_.ID AS col_0_0_
FROM EMAIL email0_
LEFT OUTER JOIN email emailso1_ ON email0_.ID = emailso1_.ID_EMAIL_IN AND emailso1_.RESPONSE_TYPE <> 'response'
WHERE email0_.TYPE = 'in'
AND email0_.RESPONSE_MANDATORY = true
LIMIT 0 , 30
As you can see I need to check if the RESPONSE_TYPE is equals on the same line that the LEFT OUTER JOIN. Does anybody know how to write such an JPA criteria query ?
Thanks ,
Louis
Edited by: user13105928 on 17 févr. 2011 03:06

You cannot define an ON clause with Criteria, nor JPQL.
Perhaps you can reword the query to avoid needing an ON clause.
What is the query you want to do (in english)?
Can you just use an OR in the where clause?
There is a enhancement request to have ON clause support added, please vote for it.
https://bugs.eclipse.org/bugs/show_bug.cgi?id=312146
James : http://www.eclipselink.org

Deltas in cubes and dsos

hello, i have a question about delta-enabled datasources. there is a table roosource so in that table if i put in some datasources they are not data-enabled but when i go in bw i see cubes built off of those datasources bringing deltas how is it possible?

Hi,
You might be talking about the Delta DTP requests in Cube manage.
If you could check the source for this Cube, the source will be getting loaded with the full requests and this cube DTP will be bringing that Full load in the Delta Request.
Even if the Cube is loaded directly from Datasource, it picks the latest PSA request loaded, irrespective of its a Full request or Delta from SAP R/3. So this load from Datasource to Cube is Delta and has got very little to the type of Datasource.
Regards,
Pratap Sone

Summary Report with cube and rollup

hi guys,
i m working a oracle 9i, i need a summary report after query execution. im using rollup and cube but it is giving me unwanted rows as well. for ex below
Select
IRH_REFNO,IRH_TDATE,IRH_BDAMT,IRH_RLOCN, IRH_ILOCN,IRH_EXPECTED_DATE,IRH_ADD_USERID ,
count(*),
sum(irh_bdamt)
from IRH
where IRH_INTYPE='R'
and IRH_RLOCN='EDP'
group by cube(IRH_REFNO,IRH_TDATE,IRH_BDAMT,IRH_RLOCN, IRH_ILOCN,IRH_EXPECTED_DATE,IRH_ADD_USERID )
Order by IRH_TDATE asc
i want only two columns to be computed at the end of query. i.e sum of BDAMT and count of rows. i dont want any groupings. any alternate for this.
thanks n regards
fkhan

Please post a create table statement, a few insert statements and the expected output, so we can help you.
Regards,
Rob.

Partition Eliminiation on views and joins with other partitioned tables

I have a bunch of tables that are daily partioned and other which are not. We constantly join all these tables. I have noticed that partition elimination doesn't happen in most cases and I want some input or pointers on these.
Case 1
We have a view that joins a couple of partitioned tables on the id fileds and they the partition key is timestamp with local time zone.
TABLEA
tableaid
atime
TABLEB
tablebid
tableaid
btime
The view basically joins on tableaid, a.tableaid = b.tableaid(+) and a bunch of other non partitioned tables. atime and btime are the individal partition keys in the tables and these time do not match up like the id's in other words there is a little bit of correlation but they can be very different.
When I run a query against the view providing a time range for btime, I see partition elimination on tabled in the explain plan with KEY on Pstart/Pstop. But its a full tablescan on tablea. I was hoping there would be somekind of partition elimination here since its also partioned daily on the same datatype timestamp with local time zone.
Case 2
I have a couple of more partitioned tables
TABELC
tablecid
tablebid
ctime
TABLED
tabledid
tablebid
dtime
As you can see these tables are joined with tablebid and the times here generally correlate to tableb's timestamp as well.
Sub Case 1
When I join these tables to the view and give a time range on btime, I see partition elimination happening on tableb but not on tablea or any of the other tables.
Sub Case 2
Then I got rid of the view, wrote a query that us similar to the view where I join on tableaid (tablea and tableb), then on tablebid (tableb, tablec and tabled) and a few other tables and execute the query with some time range on btime and I still see that partition elimination happens only on tableb.
I thought that if other tables are also partitioned on a similark key that partition eliminition should happen? Or what am I missing here that is preventing from partition elimination on the other tables.

Performance is of utmost importance and partition pruning is going to help in that. I guess that's what I'm trying to acheive.
To achive partition elimination on tablec, d, etc I'm doing an outer join with btime and that seems to work. Also since most of the time after the partition elimination, I don't need a full tablescan since the period I will be querying most of the time will be small I also created a local index on id field that I'm using to join so that it can do a "TABLE ACCESS BY LOCAL INDEX ROWID" this way it should peform better than a global index since the index traversal path should be small when compared to the global index.
Of couse I still have problem with the tablea not being pruned, since I cannot do an outer join on two fields in the same table (id and time). So might just include the time criteria again and may be increase the time range a little more when compared to what the actual user submitted to try not to miss those rows.
Any suggestions is always welcome.

How to tell record amount in Cube or DSO in GB

All,
I me trying to figure out how to see data amount in cubes and DSOs in GB. I appreciate any help.
Regards,
Mike

Thanks for your reply Srikanth. I do not have DB02 access however I do have access to ORA_COCKPIT. What I see there is SPACE->Tablespaces-Overview
Detailed Analysis
I remember there was a program for cubes which was showing data amount for the cubes but not for the DSOs. I cannot recall the program name

BI 7.0 can we build a INFOSET on a Multi Cube and Infoobject

Hi
In BI 7.0 can we build a INFOSET on a Multi Cube and Infoobject
Thanks

Hi,
No not possible.
You can include any DataStore object, InfoCube or InfoObject of type Characteristic with Master Data in a join. A join can contain objects of the same object type, or objects of different object types. You can include individual objects in a join as many times as you want. Join conditions (equal join condition) connect the objects in a join to one another . A join condition specifies the combination of individual object records included in the results set.
For more info go through the link below
http://help.sap.com/saphelp_nw2004s/helpdata/EN/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Regards,
Marasa.

Error while displaying data of a Infoset with Cubes

Hi,
The following error displays when I try to read Infoset, which have 2 infocubes joined with inner join.
"IBM][CLI Driver][DB2] DSNT408I SQLCODE = -204, ER ROR: SAPR3.T00001 IS AN UNDEFINED NAME DSNT41 8I SQLSTATE = 42704 SQLSTATE RETURN CODE"
"Error when generating the SQL statement"
"Error reading the data of InfoProvider <Infoset Name>"
Any one familier with this problem?
Experts..any know causes or solutions for this?
Thanks.
Chenna.
Edited by: CHENNA S on Jan 6, 2009 2:28 PM

All objects are active and checked.
In my testing I have noticed it is not accepting InfoCube . Any one know why its happening? What's wrong with the cubes in this InfoSoft?
Thanks.
Chenna
Edited by: CHENNA S on Jan 6, 2009 3:17 PM

How to add fields to already loaded cube or dso and how to fill records in

how to add fields to already loaded cube or dso and how to fill it.can any one tell me the critical issues in data loading process..?

This is sensitive task with regards to large volumes of data in infoproviders.
The issue is to reload of data in case of adjusted structures of infoproviders.
Indeed there are some tricks. See following:
http://weblogs.sdn.sap.com/cs/blank/view/wlg/19300
https://service.sap.com/sap/support/notes/1287382

Infoset Join condition on Key feilds and data fields

Hi Guys,
I have a requirement to biuld the Info set with join conditon on two DSO's the info objects which i am using in the JOin condition are defined as data fieds in one DSO and defined as key fields in another DSO, is it possible to define join condition on key fields and data fields.
The two info objects are
                       0AC_DOC_NO
                       0ITEM_NUM
These two info objects are defined as data fields in DSO :   0LIV_DS1   Invocie verificaion
                                                        key fields in DSO:    0FIAP_0o3 FI AP Line Item
Please suggest me is it possible to define join the condtion on the data fields and key feilds.
Thanks
Best regards
SG

Hi
yes you can create join, you will get any issue in reporting level.
example: Say i want to create Info Set on 0MATERIAL and Sales DSO.
In 0MATERIAL Info Object it is key filed, but in my DSO 0MATERIAL is data field.Still we can create
Creation of join is dependent on fields common in your source objects.
check out the below document
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Sep 27, 2011 2:26 AM

Doughts on Infoset Joins with Cube and DSO in BI 7

Similar Messages

Maybe you are looking for