Down load or create text file using bapi

hi friends,
My requirement is to create text file or down load text file in presentation server when the bapi runs in which the ip address is defined at the interface.
plz sujjest me,
points will be rewarded .
prasad.

Hi,
The FM 'GUI_DOWNLOAD' should use the network path like '
10.10.10.10\shared_file\PO.txt'. Pass this value to the file path parameter and execute the program.
Thanks..
Preetham S

Similar Messages

How to Run a text files using UNIX

Hi,
I have 10 text files in my project my task is to load all the text files data into Relational Database so i can use sql*loader to load all the text files data into a Database.
but the thing is another project i have 200 text files so i need to run these text files using UNIX script could anyone tell me how to load all the text files using UNIX
Thank's
Edited by: Lavanya on Sep 5, 2012 3:09 PM

Lavanya,
This question relates to shell scripting and in IMO it is not an oracle question.
I have made some initial assumptions before my proposed solution.
PLEASE note that this is untested, but can just guide you as a template for solving your problem.
Assuming that you have properly set up the control file and mapped each and every table in it as per the file information which you have..
Assuming the text file to be in the format of : ------ (as suggested by other posters earlier, this file holds instructions about the file and table mapping which shall be used by your sqlldr process.)
tmp.txt:
text_file_1-------------should goes to----customer_info_table
text_file_2------------should goes to------customer_address_table
text_file_3-----------should goes to-------customer_order_table
while read line
do
SQLLDR CONTROL=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.ctl,
LOG=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.log,
BAD=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.bad,
DATA=`echo $line | sed 's/should goes to/ /g' | sed 's/-//g' | awk -F " " '{print $1}'`.txt
USERID=scott/tiger
done <tmp.txtAll I am trying to run from the above shell script is : -- PLEASE TEST it if it matches your requirement.
SQLLDR CONTROL=text_file_1.ctl, LOG=text_file_1.log, BAD=text_file_1.bad, DATA=text_file_1.txt USERID=scott/tiger
SQLLDR CONTROL=text_file_2.ctl, LOG=text_file_2.log, BAD=text_file_2.bad, DATA=text_file_2.txt USERID=scott/tiger
SQLLDR CONTROL=text_file_3.ctl, LOG=text_file_3.log, BAD=text_file_3.bad, DATA=text_file_3.txt USERID=scott/tigerRepeating my assumptions, I assume you have all those files required for SQLLDR process to run (ctl file, data file...)
Cheers,
Manik

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

How to create and read text file using LabVIEW 7.1 PDA module?

How to create and read text file using LabVIEW 7.1 PDA module? I can not create a text file and read it.
I attach my code here.
Attachments:
File_IO.vi ‏82 KB

Well my acquisition code runs perfect. The problem is reading it. I can't seem to read my data no matter what I do. My data gets saved as a string using the array to string vi but I've read that the string to array vi (which I need to convert back to array to read my data) does not work on the pda. I'm using version 8.0. So I was trying to modify the program posted in this discussion so that it would save data from my DAQ. I did that but I still can't read the data after its saved. I really don't know what else to do. All I need to do is read the data on the pda itself. I can't understand why I'm having such a hard time doing that. I found a possible solution on another discussion that talks about parsing the strings because of the bug in the "string to array" vi. However, that lead me to another problem because for some reason, the array indicators or graphs don't function on the pda. When i build the program to the pda or emulator, the array indicators are faded out on the front panel as if the function is not valid. Does this kind of help give a better picture of what I'm trying to do. Simply read data back. Thanks.

Creating a text file using pl/sql

how can one create a text file using pl/sql?
Say for example abcd.txt in the d: drive
(d:\abcd.txt)
on a windows nt server

<BLOCKQUOTE>quote:<HR>Originally posted by bhrigu nagal ([email protected]):
thanks for your replies
I had already set the utl_file_dir parameter
I tried the utl package and wrote the following code but got some errors
declare
filehandler UTL_FILE.FILE_TYPE;
begin
filehandler:=UTL_FILE.fopen('d:/intel/','myfile.txt','w');
utl_file.put_line(filehandler,'look masjdfgsd\n');
utl_file.fclose(filehandler);
exception when utl_file.invalid_path then
raise_application_error(-20023,'bhrigu ,chk the path');
end;
the errors
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "SYS.UTL_FILE", line 101
ORA-06512: at "SYS.UTL_FILE", line 157
ORA-06512: at line 4
if u know what this is please tell me
thanks bhrigu
<HR></BLOCKQUOTE>
U need :
1) To have UTL_FILE_DIR param in the init file of the instance with the same directory (don't forget to stop and restart the base)
2) Handled the exceptions listed in the utl_file package (Oracle_home\rdbms\admin\utlfile.sql) in your source.
3) Turn set serveroutput on in SQL*Plus.
Run your procedure and see the error message to debug.
Good luck
null

Reading XML file using BAPI and then uploading that xml file data into SAP

I am getting a xml file from Java server. I need to take
data from this file using BAPI and need to upload into SAP using SAP.
Please tell me how to read XML files using BAPI's.

SDIXML_DATA_TO_DOM Convert SAP data (elementary/structured/table types) into DOM (XML
SDIXML_DOM_TO_XML Convert DOM (XML) into string of bytes that can be downloaded to PC or application server
SDIXML_DOM_TO_SCREEN Display DOM (XML)
SDIXML_DOM_TO_DATA
data: it_table like t001 occurs 0.
data: l_dom TYPE REF TO IF_IXML_ELEMENT,
 m_document TYPE REF TO IF_IXML_DOCUMENT,
 g_ixml TYPE REF TO IF_IXML,
 w_string TYPE XSTRING,
 w_size TYPE I,
 w_result TYPE I,
 w_line TYPE STRING,
 it_xml TYPE DCXMLLINES,
 s_xml like line of it_xml,
 w_rc like sy-subrc.
start-of-selection.
select * from t001 into table it_table.
end-of-selection.
initialize iXML-Framework ****
write: / 'initialiazing iXML:'.
class cl_ixml definition load.
g_ixml = cl_ixml=>create( ).
check not g_ixml is initial.
write: 'ok'.
create DOM from SAP data ****
write: / 'creating iXML doc:'.
m_document = g_ixml->create_document( ).
check not m_document is initial.
write: 'ok'.
write: / 'converting DATA TO DOM 1:'.
CALL FUNCTION 'SDIXML_DATA_TO_DOM'
 EXPORTING
 NAME = 'IT_TABLE'
 DATAOBJECT = it_table[]
 IMPORTING
 DATA_AS_DOM = l_dom
 CHANGING
 DOCUMENT = m_document
 EXCEPTIONS
 ILLEGAL_NAME = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
check not l_dom is initial.
write: / 'appending DOM to iXML doc:'.
w_rc = m_document->append_child( new_child = l_dom ).
if w_rc is initial. write 'ok'.
else. write: 'Err =', w_rc.
endif.
visualize iXML (DOM) ****
write: / 'displaying DOM:'.
CALL FUNCTION 'SDIXML_DOM_TO_SCREEN'
 EXPORTING
 DOCUMENT = m_document
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
convert DOM to XML doc (table) ****
write: / 'converting DOM TO XML:'.
CALL FUNCTION 'SDIXML_DOM_TO_XML'
 EXPORTING
 DOCUMENT = m_document
 PRETTY_PRINT = ' '
 IMPORTING
 XML_AS_STRING = w_string
 SIZE = w_size
 TABLES
 XML_AS_TABLE = it_xml
 EXCEPTIONS
 NO_DOCUMENT = 1
 OTHERS = 2.
if sy-subrc = 0. write 'ok'.
else. write: 'Err =', sy-subrc.
endif.
write: / 'XML as string of size:', w_size, / w_string.
describe table it_xml lines w_result.
write: / 'XML as table of', w_result, 'lines:'..
loop at it_xml into s_xml.
 write s_xml.
endloop.
write: / 'end of processing'.
end of code
Hope this will be useful.
regards
vinod

HOW TO CREATE PURCHASE ORDER USING BAPI

HI FRIENDS,
I HAVE URGENT REQUIREMNT ,TO CREATE PURCHASE ORDER USING BAPI.PLS HELP ON THIS.
UR'S
RAVI

Hi
See the sample code and do accordingly
REPORT zpo_bapi_purchord_tej.
DATA DECLARATIONS *
TYPE-POOLS slis.
TYPES: BEGIN OF ty_table,
v_legacy(8),
vendor TYPE bapimepoheader-vendor,
purch_org TYPE bapimepoheader-purch_org,
pur_group TYPE bapimepoheader-pur_group,
material TYPE bapimepoitem-material,
quantity(13),
delivery_date TYPE bapimeposchedule-delivery_date,
net_price(23),
plant TYPE bapimepoitem-plant,
END OF ty_table.
TYPES: BEGIN OF ty_alv,
v_legs(8),
success(10),
v_legf(8),
END OF ty_alv.
TYPES: BEGIN OF ty_alv1,
v_legf1(8),
v_msg(500),
END OF ty_alv1.
*-----Work area declarations.
DATA: x_table TYPE ty_table,
x_header TYPE bapimepoheader,
x_headerx TYPE bapimepoheaderx,
x_item TYPE bapimepoitem,
x_itemx TYPE bapimepoitemx,
x_sched TYPE bapimeposchedule,
x_schedx TYPE bapimeposchedulx,
x_commatable(255),
x_alv TYPE ty_alv,
x_alv1 TYPE ty_alv1,
x_alv2 TYPE ty_alv1.
*-----Internal table declarations.
DATA: it_table TYPE TABLE OF ty_table,
it_commatable LIKE TABLE OF x_commatable,
it_item TYPE TABLE OF bapimepoitem,
it_itemx TYPE TABLE OF bapimepoitemx,
it_sched TYPE TABLE OF bapimeposchedule,
it_schedx TYPE TABLE OF bapimeposchedulx,
it_alv TYPE TABLE OF ty_alv,
it_alv1 TYPE TABLE OF ty_alv1,
it_alv2 TYPE TABLE OF ty_alv1.
DATA: po_number TYPE bapimepoheader-po_number,
x_return TYPE bapiret2,
it_return TYPE TABLE OF bapiret2,
v_file TYPE string,
v_temp(8),
v_succsount TYPE i VALUE 0,
v_failcount TYPE i VALUE 0,
v_total TYPE i.
DATA: v_temp1(5) TYPE n VALUE 0.
DATA: x_event TYPE slis_t_event,
x_fieldcat TYPE slis_t_fieldcat_alv,
x_list_header TYPE slis_t_listheader,
x_event1 LIKE LINE OF x_event,
x_layout1 TYPE slis_layout_alv,
x_variant1 TYPE disvariant,
x_repid2 LIKE sy-repid.
DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
SELECTION-SCREEN *
SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
*-----To fetch the flat file.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK v_b1.
AT SELECTION-SCREEN *
AT SELECTION-SCREEN.
IF p_file IS INITIAL.
MESSAGE text-001 TYPE 'E'.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*-----To use F4 help to find file path.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
v_file = p_file.
START-OF-SELECTION *
START-OF-SELECTION.
PERFORM gui_upload.
LOOP AT it_table INTO x_table.
PERFORM header_details.
v_temp = x_table-v_legacy.
LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
PERFORM lineitem.
PERFORM schedule.
ENDLOOP.
DELETE it_table WHERE v_legacy = v_temp.
PERFORM bapicall.
MOVE po_number TO x_alv-success.
APPEND x_alv TO it_alv.
CLEAR x_alv.
*-----To clear the item details in internal table after the operation for a header.
REFRESH: it_item,
it_itemx,
it_sched,
it_schedx.
CLEAR: v_temp1.
ENDLOOP.
v_total = v_succsount + v_failcount.
PERFORM display_alv.
FORM GUI_UPLOAD *
FORM gui_upload .
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
TABLES
data_tab = it_commatable
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17
IF sy-subrc = 0.
*-----To fetch the comma seperated flat file into an internal table.
LOOP AT it_commatable INTO x_commatable.
IF x_commatable IS NOT INITIAL.
SPLIT x_commatable AT ',' INTO
x_table-v_legacy
x_table-vendor
x_table-purch_org
x_table-pur_group
x_table-material
x_table-quantity
x_table-delivery_date
x_table-net_price
x_table-plant.
APPEND x_table TO it_table.
ENDIF.
CLEAR x_table.
ENDLOOP.
ENDIF.
ENDFORM. " gui_upload
FORM HEADER_DETAILS *
FORM header_details .
MOVE 'NB' TO x_header-doc_type.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-vendor
IMPORTING
output = x_table-vendor
MOVE x_table-vendor TO x_header-vendor.
MOVE x_table-purch_org TO x_header-purch_org.
MOVE x_table-pur_group TO x_header-pur_group.
x_headerx-doc_type = 'X'.
x_headerx-vendor = 'X'.
x_headerx-purch_org = 'X'.
x_headerx-pur_group = 'X'.
ENDFORM. " header_details
FORM LINEITEM *
FORM lineitem .
v_temp1 = v_temp1 + 10.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = v_temp1
IMPORTING
output = v_temp1.
MOVE v_temp1 TO x_item-po_item.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_table-material
IMPORTING
output = x_table-material.
MOVE x_table-material TO x_item-material.
MOVE x_table-quantity TO x_item-quantity.
MOVE x_table-net_price TO x_item-net_price.
MOVE x_table-plant TO x_item-plant.
x_itemx-po_item = v_temp1.
x_itemx-material = 'X'.
x_itemx-quantity = 'X'.
x_itemx-net_price = 'X'.
x_itemx-plant = 'X'.
APPEND x_item TO it_item.
APPEND x_itemx TO it_itemx.
CLEAR: x_item, x_itemx.
ENDFORM. " lineitem1
FORM SCHEDULE *
FORM schedule .
MOVE x_table-delivery_date TO x_sched-delivery_date.
MOVE v_temp1 TO x_sched-po_item.
x_schedx-delivery_date = 'X'.
x_schedx-po_item = v_temp1.
APPEND x_sched TO it_sched.
APPEND x_schedx TO it_schedx.
CLEAR: x_sched, x_schedx.
ENDFORM. " schedule
FORM BAPICALL *
FORM bapicall .
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = x_header
poheaderx = x_headerx
IMPORTING
exppurchaseorder = po_number
TABLES
return = it_return
poitem = it_item
poitemx = it_itemx
poschedule = it_sched
poschedulex = it_schedx.
IF po_number IS NOT INITIAL.
v_succsount = v_succsount + 1.
MOVE x_table-v_legacy TO x_alv-v_legs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ELSE.
v_failcount = v_failcount + 1.
MOVE x_table-v_legacy TO x_alv-v_legf.
MOVE x_table-v_legacy TO x_alv1-v_legf1.
LOOP AT it_return INTO x_return.
IF x_alv1-v_msg IS INITIAL.
MOVE x_return-message TO x_alv1-v_msg.
ELSE.
CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
ENDIF.
ENDLOOP.
APPEND x_alv1 TO it_alv1.
CLEAR x_alv1.
ENDIF.
ENDFORM. " bapicall
FORM DISPLAY_ALV *
FORM display_alv .
PERFORM x_list_header.
PERFORM build_fieldcat CHANGING x_fieldcat.
x_repid2 = sy-repid.
x_event1-name = 'TOP_OF_PAGE'.
x_event1-form = 'TOP_OF_PAGE'.
APPEND x_event1 TO x_event.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = x_fieldcat
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_save = 'A'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " display_master_data
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm selfield
TYPE slis_selfield.
READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
CLEAR : x_alv2,it_alv2[].
LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
x_alv2 = x_alv1.
APPEND x_alv2 TO it_alv2 .
ENDLOOP.
DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : x3_fieldcat,it_fieldcat[].
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_LEGF1'.
x3_fieldcat-reptext_ddic = text-111.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
CLEAR x3_fieldcat.
x3_fieldcat-col_pos = '1'.
x3_fieldcat-fieldname = 'V_MSG'.
x3_fieldcat-reptext_ddic = text-112.
x3_fieldcat-ref_tabname = 'IT_ALV2'.
APPEND x3_fieldcat TO it_fieldcat.
CLEAR x3_fieldcat.
x_layout1-colwidth_optimize = 'X'.
x_layout1-zebra = 'X'.
IF it_alv2[] IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = x_repid2
is_layout = x_layout1
it_fieldcat = it_fieldcat
i_save = 'A'
i_callback_top_of_page = 'TOP'
is_variant = x_variant1
it_events = x_event
TABLES
t_outtab = it_alv2
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDIF.
ENDFORM.
FORM USER_COMMAND *
FORM top.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = 'Commentry'.
ENDFORM.
FORM BUILD_FIELDCAT *
FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
DATA: x1_fieldcat TYPE slis_fieldcat_alv.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '1'.
x1_fieldcat-fieldname = 'V_LEGS'.
x1_fieldcat-reptext_ddic = text-108.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '2'.
x1_fieldcat-fieldname = 'SUCCESS'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-109.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
x1_fieldcat-col_pos = '3'.
x1_fieldcat-fieldname = 'V_LEGF'.
x1_fieldcat-key = 'X'.
x1_fieldcat-reptext_ddic = text-110.
x1_fieldcat-ref_tabname = 'IT_ALV'.
APPEND x1_fieldcat TO et_fieldcat.
CLEAR x1_fieldcat.
ENDFORM. " build_fieldcat
FORM BUILD_LIST_HEADER *
FORM x_list_header.
DATA: x_list_header1 TYPE slis_listheader.
*-----List Header: type H
CLEAR x_list_header1 .
x_list_header1-typ = 'H'.
x_list_header1-info = text-105.
APPEND x_list_header1 TO x_list_header.
*-----List Key: type S
x_list_header1-typ = 'S'.
x_list_header1-key = text-106.
x_list_header1-info = v_total.
APPEND x_list_header1 TO x_list_header.
*-----List Key: Type S
CLEAR x_list_header1 .
x_list_header1-typ = 'S'.
x_list_header1-key = text-107.
x_list_header1-info = v_succsount.
APPEND x_list_header1 TO x_list_header.
ENDFORM. " build_list_header
FORM TOP_OF_PAGE *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = x_list_header.
ENDFORM. " TOP_OF_PAGE
Reward points if useful
Anji

Why this error in writing string to text file using utl_file?

HI Friends,
Iam trying to write procedure to add one line of text in text file using UTIL package. But getting error.
create or replace procedure Add_To_File() is
OutFile utl_file.file_type;
l_err_code NUMBER(10);
l_err_msg VARCHAR2(2000);
vNewLine VARCHAR2(4000);
vdir varchar2(200):='UTIL_DIR';
begin
OutFile:=utl_file.fopen(vdir,'out.txt','w','32000');
vNewLine:='Loading is successfull';
utl_file.put_line(OutFile,vNewLine);
EXCEPTION
WHEN OTHERS THEN
l_err_code := SQLCODE;
l_err_msg := SUBSTR(SQLERRM,1,128);
Dbms_output.put_line(l_err_code || l_err_msg);
end;
when i execute above procedure iam getting this error.
LINE/COL ERROR
1/23 PLS-00103: Encountered the symbol ")" when expecting one of the
following:
<an identifier> <a double-quoted delimited-identifier>
current delete exists prior
Please suggest me where iam wrong.
Thanks,
Venkat Vadlamudi

868591 wrote:
HI Friends,
Iam trying to write procedure to add one line of text in text file using UTIL package. But getting error.
create or replace procedure Add_To_File() is
OutFile utl_file.file_type;
l_err_code NUMBER(10);
l_err_msg VARCHAR2(2000);
vNewLine VARCHAR2(4000);
vdir varchar2(200):='UTIL_DIR';
begin
OutFile:=utl_file.fopen(vdir,'out.txt','w','32000');
vNewLine:='Loading is successfull';
utl_file.put_line(OutFile,vNewLine);
EXCEPTION
WHEN OTHERS THEN
l_err_code := SQLCODE;
l_err_msg := SUBSTR(SQLERRM,1,128);
Dbms_output.put_line(l_err_code || l_err_msg);
end;
when i execute above procedure iam getting this error.
LINE/COL ERROR
1/23 PLS-00103: Encountered the symbol ")" when expecting one of the
following:
<an identifier> <a double-quoted delimited-identifier>
current delete exists prior
Please suggest me where iam wrong.
Thanks,
Venkat Vadlamudibelow works for me
1 CREATE OR replace PROCEDURE Add_to_file
2 IS
3 outfile utl_file.file_type;
4 l_err_code NUMBER(10);
5 l_err_msg VARCHAR2(2000);
6 vnewline VARCHAR2(4000);
7 vdir VARCHAR2(200) := 'UTIL_DIR';
8 BEGIN
9 outfile := utl_file.Fopen(vdir, 'out.txt', 'w', '32000');
10 vnewline := 'Loading is successfull';
11 utl_file.Put_line(outfile, vnewline);
12 EXCEPTION
13 WHEN OTHERS THEN
14 l_err_code := SQLCODE;
15 l_err_msg := Substr(sqlerrm, 1, 128);
16 dbms_output.Put_line(l_err_code
17 || l_err_msg);
18* END;
SQL> /
Procedure created.

Load Multiple Dynamic Text Files in Different frames on Maintimeline

Hello!
I have managed to load an external text file in one place one the maintimeline. I would like to do the same thing on other frames. When I go to duplicate the same thing that I did on the first one I get a duplicate textReq request. Do I need to give the textReq a more specific name for each section? When I did this the movie wouldn't even recognize and of the code that was working before.
Can anyone help me with this code? Thanks in advance
I am attaching link so you can see sections I am talking about. Also you will notice that the swf file I loaded won't go away. That's another problem...ugh.
Here is link:
http://www.sandraschmitt.com/coclico/index100.html
Here is code on maintimeline:
stop();
import fl.transitions.*;
import fl.transitions.easing.*;
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.events.ProgressEvent;
function startLoad() {
    var swfLoader:Loader = new Loader();
    var swfRequest:URLRequest = new URLRequest("endlessCoclico3.swf");
    swfLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, onCompleteHandler);
    swfLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, onProgressHandler);
    swfLoader.load(swfRequest);
function onCompleteHandler(loadEvent:Event) {
    addChild(loadEvent.currentTarget.content);
function onProgressHandler(swfProgress:ProgressEvent) {
    var percent:Number = swfProgress.bytesLoaded/swfProgress.bytesTotal;
    trace(percent);
startLoad();
//handle events for buttons...
collections.addEventListener(MouseEvent.CLICK, clickSection);
raison.addEventListener(MouseEvent.CLICK, clickSection);
stores.addEventListener(MouseEvent.CLICK, clickSection);
news.addEventListener(MouseEvent.CLICK, clickSection);
contact.addEventListener(MouseEvent.CLICK, clickSection);
home.addEventListener(MouseEvent.CLICK, clickSection);
function clickSection(evtObj:MouseEvent) {
    //trace shows what's happening... in the output window
    trace("The "+evtObj.target.name+" button was clicked!");
    //go to the section clicked on...
    gotoAndStop(evtObj.target.name);
Here is code on actual frame where the dynamic text is working:
//Loaded exteranl text fields
var textLoader:URLLoader = new URLLoader();
var textReq:URLRequest = new URLRequest("text_philosophy.txt");
function textLoaded(event:Event):void {
    philosophy_txt.text = textLoader.data;
textLoader.load(textReq);
textLoader.addEventListener(Event.COMPLETE, textLoaded);

Textfields: What I like to do, mainly for peace of mind, is to have a layer that I dedicate to actionscript that only has code in frame 1 but it extends the full length of the timeline so that this code is available to every frame on any other layer. In this frame I put variables and functions that can get used/shared wherever they happen to be needed. I usually create another separate layer for actions types of actionscript... stuff that happens at the local frame level, like stop();, or like assigning a variable a new value, etc... things local to being at that frame/location. So with that in mind
In frame 1 on my shared-by-everyone layer, I'd probably declare the variable....
var textReq:URLRequest;
And when I get to a particular frame where I want to load a new textfield with data, I assign that var its value on the local actions layer...
textReq = new URLRequest("text_philosophy.txt");
along with the rest of the local execution regarding loading the file, etc...
SWF's:
Yeah, pretty much, and it becomes an object that has a home on the timeline, so if you move away from that frame the swf doesn't follow.

Attaching text file using SO_NEW_DOCUMENT_ATT_SEND_API1

hello guys, i'm a newbie here.
I'm having trouble attaching an existing text file using function 'SO_NEW_DOCUMENT_ATT_SEND_API1'. It seems i can't find the right combination of parameters that are being passed to this function.
first, i'm using WS_UPLOAD to upload the text file to an internal table then i'm creating all the neccessary internal tables that will be use by this function..
By the way, i'm trying to send mail w/ attachments to external mail and SAPids. Below is my code.
REPORT ZHR_TESTEMAIL .
TABLES: USR02, PA0105, SOSU, SOUC, RLGRAP, IBIPPARMS, DYNPREAD, RSCSEL.
DATA: FOLD_YR(2) TYPE C,
 FOLD_TYPE(3) TYPE C,
 G_HEADER LIKE SOOD2,
 G_FOLMAM LIKE SOFM2,
 METHOD1 LIKE SY-UCOMM,
 G_DOCUMENT LIKE SOOD4,
 G_USER LIKE SOUDNAMEI1,
 FOLD_NUMBER(12) TYPE C,
 G_NEW_PARENT LIKE SOODK,
 G_OWNER LIKE SOUD-USRNAM,
 G_REF_DOCUMENT LIKE SOOD4,
 G_USER_DATA LIKE SOUDATAI1,
 G_AUTHORITY LIKE SOFA-USRACC,
 G_OBJCNT LIKE SOLI OCCURS 0 WITH HEADER LINE,
 G_OBJHEAD LIKE SOLI OCCURS 0 WITH HEADER LINE,
 G_OBJPARA LIKE SELC OCCURS 0 WITH HEADER LINE,
 G_OBJPARB LIKE SOOP1 OCCURS 0 WITH HEADER LINE,
 G_RECIPIENTS LIKE SOOS1 OCCURS 0 WITH HEADER LINE,
 G_REFERENCES LIKE SOXRL OCCURS 0 WITH HEADER LINE,
 G_ATTACHMENTS LIKE SOOD5 OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF G_FILES OCCURS 10 ,
 TEXT(4096) TYPE C,
 END OF G_FILES.
DATA: BEGIN OF IT_WS_FILE OCCURS 0,
 WS_FILE LIKE RLGRAP-FILENAME,
 END OF IT_WS_FILE.
DATA: BEGIN OF IT_SAPID OCCURS 0,
 SAPID LIKE USR02-BNAME,
 END OF IT_SAPID.
DATA: BEGIN OF IT_EMAIL OCCURS 0,
 EMAILADD LIKE PA0105-USRID_LONG,
 END OF IT_EMAIL.
DATA: BEGIN OF IT_TSP01 OCCURS 0.
 INCLUDE STRUCTURE TSP01.
DATA: END OF IT_TSP01.
DATA: BEGIN OF TAB2 OCCURS 50,
 TEXT(200) TYPE C,
 END OF TAB2.
DATA: V_DOCDATA TYPE SODOCCHGI1,
 V_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
 V_OBJHEAD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 V_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 V_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 V_OBJHEX LIKE SOLIX OCCURS 0 WITH HEADER LINE,
 IT_RECVRS TYPE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
 IT_CONTNT TYPE SOLISTI1 OCCURS 0 WITH HEADER LINE,
 IT_BODY LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE,
 V_TLIN TYPE I,
 V_LINE TYPE I.
DATA: BEGIN OF IT_TEXTLINE OCCURS 500,
 TEXTLINE(5000),
 END OF IT_TEXTLINE.
DATA: FYL LIKE RLGRAP-FILENAME,
 GV_SUBNO LIKE SOSU-SUBNO,
 GV_EMAIL LIKE PA0105-USRID_LONG,
 GV_NEXTDAY LIKE SY-DATUM,
 YEAR(4) TYPE C,
 RECFLAG TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK PARAM WITH FRAME TITLE TEXT-001.
PARAMETERS: SUBJ(254) TYPE C OBLIGATORY, "Subject
 DESC(254) TYPE C. "Message
SELECT-OPTIONS: SAPID FOR USR02-BNAME NO INTERVALS. "Recipient's SAP ID
SELECT-OPTIONS: EMAILADD FOR PA0105-USRID_LONG NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM.
SELECTION-SCREEN BEGIN OF BLOCK PARAM2 WITH FRAME TITLE TEXT-002.
SELECT-OPTIONS: WS_FILE FOR DYNPREAD-FIELDNAME NO INTERVALS.
SELECTION-SCREEN END OF BLOCK PARAM2.
SELECTION-SCREEN BEGIN OF BLOCK PARAM3 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT1 RADIOBUTTON GROUP A USER-COMMAND BUT. "Local PC
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT1.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT2 RADIOBUTTON GROUP A. "Server
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: RBUT3 RADIOBUTTON GROUP A. "Spool
SELECTION-SCREEN COMMENT 5(20) FOR FIELD RBUT3.
PARAMETERS: SPOOLNUM LIKE RSPOTYPE-RQNUMBER. "Spool Number
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PARAM3.
SELECTION-SCREEN BEGIN OF BLOCK PROC WITH FRAME TITLE TEXT-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER: BPROC AS CHECKBOX USER-COMMAND BCK. "Background Processing
SELECTION-SCREEN COMMENT 5(50) FOR FIELD BPROC.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK PROC.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR WS_FILE-LOW.
DATA: WS_FILE_TEMP TYPE IBIPPARMS-PATH.
CLEAR: WS_FILE_TEMP.
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 PROGRAM_NAME = SY-REPID
 DYNPRO_NUMBER = SY-DYNNR
 FIELD_NAME = 'WS_FILE'
 IMPORTING
 FILE_NAME = WS_FILE_TEMP.
WS_FILE-LOW = WS_FILE_TEMP.
AT SELECTION-SCREEN.
SELECT SAPNAM FROM SOUC
 INTO TABLE IT_SAPID
 WHERE SAPNAM IN SAPID
 AND DELETED = ''.
GV_NEXTDAY = SY-DATUM + 1.
LOOP AT EMAILADD.
 IT_EMAIL-EMAILADD = EMAILADD-LOW.
 APPEND IT_EMAIL.
 CLEAR: IT_EMAIL.
ENDLOOP.
IF NOT BPROC IS INITIAL.
 CLEAR: RBUT1, RBUT3.
 RBUT2 = 'X'.
ELSE.
 CLEAR: RBUT2.
ENDIF.
IF NOT RBUT3 IS INITIAL.
 REFRESH: WS_FILE.
ENDIF.
IF SAPID IS INITIAL AND EMAILADD IS INITIAL.
 MESSAGE E000(ZZ) WITH TEXT-201.
ELSEIF NOT SAPID IS INITIAL AND EMAILADD IS INITIAL.
 CLEAR IT_SAPID.
 READ TABLE IT_SAPID.
 SELECT SINGLE SUBNO FROM SOSU
 INTO GV_SUBNO
 WHERE USRNO IN ( SELECT USRNO FROM SOUC
 WHERE SAPNAM = IT_SAPID-SAPID ).
 IF SY-SUBRC NE 0.
 MESSAGE E000(ZZ) WITH TEXT-202.
 ENDIF.
 CLEAR: IT_SAPID.
ELSEIF NOT SAPID IS INITIAL AND NOT EMAILADD IS INITIAL.
 CLEAR: IT_SAPID, IT_EMAIL.
 READ TABLE IT_SAPID.
 READ TABLE IT_EMAIL.
 SELECT SINGLE SUBNO FROM SOSU
 INTO GV_SUBNO
 WHERE USRNO IN ( SELECT USRNO FROM SOUC
 WHERE SAPNAM = IT_SAPID-SAPID ).
 IF SY-SUBRC NE 0.
 SUBMIT RSSOADM0 WITH USRNAM EQ IT_SAPID-SAPID
 WITH NEW_SUBS EQ IT_EMAIL-EMAILADD
 WITH SUB_ESC EQ 'U'
 WITH EDAT EQ SY-DATUM
 WITH BDAT EQ SY-DATUM
 WITH BDAT EQ GV_NEXTDAY
 WITH EDAT EQ '99991231'
 WITH BTIM EQ SY-UZEIT
 WITH ETIM EQ '240000'
 WITH FORW_ALL EQ 'X'
 WITH PSTHR2 EQ ''
 AND RETURN.
 ENDIF.
 CLEAR: IT_SAPID.
ELSEIF NOT EMAILADD IS INITIAL AND SAPID IS INITIAL.
 RECFLAG = 'X'.
ENDIF.
START-OF-SELECTION.
 PERFORM B_SENDMAIL.
FORM B_SENDMAIL.
YEAR = SY-DATUM+0(4).
LOOP AT WS_FILE.
 CLEAR: FYL.
 FYL = WS_FILE-LOW.
 REFRESH: TAB2.
 CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 FILENAME = FYL
 FILETYPE = 'BIN'
 TABLES
 DATA_TAB = TAB2.
 IT_TEXTLINE[] = TAB2[].
DOCUMENT_DATA (SUBJECT OF MAIL)
 V_DOCDATA-OBJ_NAME = DESC.
 V_DOCDATA-OBJ_DESCR = SUBJ.
 V_DOCDATA-OBJ_LANGU = SY-LANGU.
 V_DOCDATA-SENSITIVTY = 'C'.
 V_DOCDATA-OBJ_PRIO = '1'.
BODY OF MAIL
 IT_BODY-LINE = 'Collection Report'.
 APPEND IT_BODY.
CONTENTS_TXT (Attachments)
 IT_CONTNT[] = IT_TEXTLINE[].
 DESCRIBE TABLE IT_CONTNT LINES V_LINE.
 READ TABLE IT_CONTNT INDEX V_LINE.
PACKING_LIST
 V_OBJPACK-DOC_SIZE = ( V_LINE - 1 ) * 255 + STRLEN( IT_CONTNT ).
 V_OBJPACK-TRANSF_BIN = 'X'.
 V_OBJPACK-HEAD_START = 1.
 V_OBJPACK-HEAD_NUM = 0.
 V_OBJPACK-BODY_START = 1.
 V_OBJPACK-BODY_NUM = V_LINE.
 V_OBJPACK-DOC_TYPE = 'TXT'.
 V_OBJPACK-OBJ_NAME = 'ATTACHMENT'.
 V_OBJPACK-OBJ_DESCR = 'Attached Document'.
 APPEND V_OBJPACK.
 CLEAR V_OBJPACK.
RECEIVERS of mail
 IF RECFLAG IS INITIAL.
 LOOP AT IT_SAPID.
 IT_RECVRS-RECEIVER = IT_SAPID-SAPID.
 IT_RECVRS-REC_TYPE = 'B'.
 IT_RECVRS-COM_TYPE = ''.
 IT_RECVRS-EXPRESS = 'X'.
 IT_RECVRS-NO_FORWARD = ''.
 IT_RECVRS-NO_PRINT = ''.
 APPEND IT_RECVRS.
 CLEAR IT_RECVRS.
 ENDLOOP.
 ELSE.
 LOOP AT EMAILADD.
 IT_RECVRS-RECEIVER = EMAILADD-LOW.
 IT_RECVRS-REC_TYPE = 'U'.
 IT_RECVRS-COM_TYPE = 'INT'.
 IT_RECVRS-EXPRESS = 'X'.
 APPEND IT_RECVRS.
 CLEAR IT_RECVRS.
 ENDLOOP.
 ENDIF.
OBJECT_HEADER (Filename)
 CONCATENATE 'Collection Report' '_'
 SY-DATUM+4(4) YEAR '.TXT'
 INTO V_OBJHEAD-LINE.
 V_OBJHEAD-LINE = FYL+16(25).
 APPEND V_OBJHEAD.
 CLEAR V_OBJHEAD.
Function Module For Sending Mail with Attachment
 CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 DOCUMENT_DATA = V_DOCDATA
 TABLES
 PACKING_LIST = V_OBJPACK
 OBJECT_HEADER = V_OBJHEAD
 CONTENTS_HEX = IT_CONTNT
 CONTENTS_TXT = IT_BODY
 RECEIVERS = IT_RECVRS
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 OTHERS = 8.
 IF SY-SUBRC = 0.
 MESSAGE S000(ZZ) WITH TEXT-005.
 ELSE.
 MESSAGE S000(ZZ) WITH TEXT-006.
 ENDIF.
ENDLOOP.
end of my code *
please help me guys... when i run this program, DOCUMENT_NOT_SENT is what i always get..
waiting for ur reply... thank you vey much and godbless.

Hi,
Try this sample code.
FORM SEND_TO_EMAIL USING zFName.
DATA: OBJPACK LIKE SOPCKLSTI1 OCCURS 2 WITH HEADER LINE.
DATA: OBJHEAD LIKE SOLISTI1 OCCURS 1 WITH HEADER LINE.
DATA: OBJBIN LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: OBJTXT LIKE SOLISTI1 OCCURS 10 WITH HEADER LINE.
DATA: RECLIST LIKE SOMLRECI1 OCCURS 5 WITH HEADER LINE.
DATA: DOC_CHNG LIKE SODOCCHGI1.
DATA: TAB_LINES LIKE SY-TABIX.
DATA: ctmp(50) TYPE C.
Creation of the document to be sent
DOC_CHNG-OBJ_NAME = 'JOURNAL'.
CONCATENATE 'SAP Payroll Journal file Period' pybegda INTO ctmp
 SEPARATED BY SPACE.
DOC_CHNG-OBJ_DESCR = cTmp.
OBJTXT = 'SAP Payroll Journal'.
APPEND OBJTXT.
CONCATENATE 'For Period' pybegda INTO ctmp
 SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
CONCATENATE 'Attached File :' zFname INTO ctmp
 SEPARATED BY SPACE.
OBJTXT = ctmp.
APPEND OBJTXT.
OBJTXT = 'Please find the attachment.'.
APPEND OBJTXT.
DESCRIBE TABLE OBJTXT LINES TAB_LINES.
READ TABLE OBJTXT INDEX TAB_LINES.
DOC_CHNG-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + STRLEN( OBJTXT ).
Creation of the entry for the compressed document
CLEAR OBJPACK-TRANSF_BIN.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 0.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
APPEND OBJPACK.
Creation of the document attachment
LOOP AT xMail.
 CONDENSE xMail-aline.
 OBJBIN = xMail-aline.
 APPEND OBJBIN.
 CLEAR OBJBIN.
ENDLOOP.
DESCRIBE TABLE OBJBIN LINES TAB_LINES.
OBJHEAD = zFname. APPEND OBJHEAD.
Creation of the entry for the compressed attachment
OBJPACK-TRANSF_BIN = 'X'.
OBJPACK-HEAD_START = 1.
OBJPACK-HEAD_NUM = 1.
OBJPACK-BODY_START = 1.
OBJPACK-BODY_NUM = TAB_LINES.
OBJPACK-DOC_TYPE = 'RAW'.
OBJPACK-OBJ_NAME = 'DATA'.
OBJPACK-OBJ_DESCR = 'SAP Payroll File'.
OBJPACK-DOC_SIZE = TAB_LINES * 255.
APPEND OBJPACK.
Completing the recipient list
LOOP AT PENERIMA.
 CONDENSE PENERIMA-PNRM.
 RECLIST-RECEIVER = PENERIMA-PNRM.
 RECLIST-REC_TYPE = 'U'.
 APPEND RECLIST.
ENDLOOP.
Sending the document
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
 EXPORTING
 DOCUMENT_DATA = DOC_CHNG
 PUT_IN_OUTBOX = ' '
 TABLES
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = OBJBIN
 CONTENTS_TXT = OBJTXT
 RECEIVERS = RECLIST
 EXCEPTIONS
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 OPERATION_NO_AUTHORIZATION = 4
 OTHERS = 99.
CASE SY-SUBRC.
 WHEN 0.
 WRITE: / 'Result of the send process:'.
 LOOP AT RECLIST.
 WRITE: / RECLIST-RECEIVER(48), ':'.
 IF RECLIST-RETRN_CODE = 0.
 WRITE / 'The document was sent'.
 ELSE.
 WRITE / 'The document could not be sent'.
 ENDIF.
 ENDLOOP.
 WHEN 1.
 WRITE: / 'Too many receiver'.
 WHEN 2.
 WRITE: / 'Document could not be sent to any recipient'.
 WHEN 4.
 WRITE: / 'No send authorization'.
 WHEN OTHERS.
 WRITE: / 'Error occurred while sending'.
ENDCASE.
ENDFORM.

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Reading XML file using BAPI I must use adapters .

Reading XML file using BAPI and then uploading that xml file data into SAP using BDC.
I cant take file on to my Application server I am getting the file dynamically from other file server and I need to use BAPis to read data from XML file.please tell me what should be my Import,Export and Tables parameterrs should be.
Thanks

Hi,
Import, export and table parameters for BAPI is required, without that BAPI will not able to collect the data from XML. What you need to do is write a Zprogram and collect the data, store that data in internal table and call the BAPI by passing required parameters.
Different Scanarios:
1) Before calling a BAPI write some other program which collects the data from XML and create a UNIX file. Try to get the data from UNIX FILE
2) If you see the XML tags, data will be in side that tags, try to get the data from XML tags and store that data in one SAP table. You can use the BAPI by fetching the data from table
3)Create a table and store the data in the table. Use the table in SAP to extract the data.
BAPI won't work without any parameters, you have to pass some parameters then the BAPI will return some values.
Hope i am clear.
Thanks&Regards,
-Suresh Revuru

How to call text file using Script in Data Integrator

Dear All,
Can any one assit me in how to call a text file using script with the help of Data Integrator.
and one question ?
M having 32 csv files i want to club thos 32 csv files into one table with the help of Data Integrator, can
any one assist me.

mary,
since you knew the file name ,when clicked in name send to server,read the file and write to servlet outputstream.
I think this would help you.
If anything wrong in mycode ..forums will help you further
BufferedInputStream bis=null;
BufferedOutputStream bos=null;
int bytesRead=0;
byte buff[]=new byte[1024];
File f=new File(test.txt);
try{
     bis= new BufferedInputStream(new FileInputStream(f));
     bytesRead=bis.read(buff,0,buff.length);
     if(bytesRead!=-1){
          // create a BufferedOutputStream from ServletOutputStream
          bos=new BufferedInputStream(response.getOutputStream());
          do{
               bos.write(buff,0,bytesRead);
          }while((bytesRead=bis.read(buff,0,buff.length))!=-1)
}catch(Exception e){
     ////error handling
     }

How to read a text file using Java

Guys,
Good day!
Please help me how to read a text file using Java and create/convert that text file into XML.
Thanks and God Bless.
Regards,
I-Talk

     public void fileRead(){
             File aFile =new File("myFile.txt");
         BufferedReader input = null;
         try {
           input = new BufferedReader( new FileReader(aFile) );
           String line = null;
           while (( line = input.readLine()) != null){
         catch (FileNotFoundException ex) {
           ex.printStackTrace();
         catch (IOException ex){
           ex.printStackTrace();
     }This code is to read a text file. But there is no such thing that will convert your text file to xml file. You have to have a defined XML format. Then you can read your data from text files and insert them inside your xml text. Or you may like to read xml tags from text files and insert your own data. The file format of .txt and .xml is far too different.
cheers
Mohammed Jubaer Arif.

How to write data to text file using external tables

can anybody tell how to write data to text file using external tables concept?

Hi,
Using external table u can load the data in your local table in database,
then using your local db table and UTL_FILE pacakge u can wrrite data to text file
external table
~~~~~~~~~~~
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7002.htm#i2153251
UTL_FILE
~~~~~~~~~
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14093
Message was edited by:
Nicloei W
Message was edited by:
Nicloei W

Down load or create text file using bapi

Similar Messages

Maybe you are looking for