Down payment does not exist
Hi friends ,
My user has posted down payment using t.code F-47.
Now when she goes to clear those down payment she cant see tht document.
Any idea?
Hi,
Go to line item report FBL1N and select the Special GL Transactions check box in the report and check whether the Down Payments are getting displayed for the Vendor. You can also display the document using transaction code FB03.
Thanks
Murali.
Similar Messages
-
Term of payment does not exist in target system
Hi Gurus,
Scenario: Classic, Self service procurment.
I made a shopping cart with my requirements.
PR and PO created in the backend system.
Posted the GR in SRM....and got the message of posted in the backend.
Posted the invoice in the SRM and message creation completed and found that it has not been posted in the backend (checked the PO history).
The message found in SRM SLG1...."Term of payment does not exist in target system" for that.
Checked the vendor conditions and found that terms of payment exist in the backend system for that vendor.
What could be the problem and how to resolve this issue?
Thanks in advance
SG
Message was edited by:
SRMGUYHi,
I am new to SRM.
We have created new payment term in ECC and replicated to SRM using BBP_UPLOAD_PAYMENT_TERMS. We are able to see in table BBP_PAYTERM and BBP_PAYMENT_TEXT.
But the non of the payment terms are reflecting into PO in SRM after this.
I am able to see the payment term in backend in BBP_PD. I am getting the below warning message when I click on Check Button.
'Term of payment does not exist in the target system'.
What could be the problem and how to resolve it?
Thanks in advance.
Best Regards,
Siddappa -
Idoc INVOIC error Baseline date for payment does not exist
Dear All,
I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
The payment term is correctly maintained in the purchase order.
Idoc message type INVOIC MM.
Baseline date for payment does not exist
Message no. M8356
Diagnosis
You have tried to post a document without a baseline date for payment.
The system will not allow you to do this.
Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
Regards
ArnaudHello,
Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
Thanks anyway for your input.
Keep in touch.
Regards
Arnaud -
ISA credit memos and down payment does not display data R/3 E-commerce 5.0
Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea?Dear guru's
The Billing doc search in the ISA searches Credit Memos and down payments. However, system don´t found documents, but business partner have credit memos and down payments.
Some idea? -
HT2534 this "none" payment button does not exist even for free software.
this "none" payment button does not exist even for free software.
Did you follow the instructions on that page exactly when creating the account ? They worked ok for me when I tried them yesterday in response to another thread.
-
I have Adobe Acrobat XI (ver 11.0.07). Adobe Help instructs me to find the document comparison command at "View > Compare Documents," however, this command does exist on my screen. My View drop-down list does not include a command for Compare Documents. Where else can I find this command?
What version of Acrobat do you have? This feature is only available in the Pro version, not in the Standard version.
-
Short dump 'Table does not exist in database'
Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num = :p_matnr and
model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
Table does not exist in database.
What happened?
The table or view name used does not
exist in the database.
The error occurred in the current database connection "DEFAULT".
What can you do?
Check the spelling of the table names in your report.
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
caught in
procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions. -
Java.lang.IllegalArgumentException: Session: null does not exist
These days I am getting an exception (java.lang.IllegalArgumentException: Session: null does not exist) when I restart the weblogic managed server. I have a work around to get away with this error. I completely delete the dataspace from ALDSP console and redeploy the artifacts jar file. This is a tedious process. Can anyone suggest a permanent fix to resolve this issue.
ALDSP version: 3.01
Weblogic Server: 9.2.2
Thanks.Hey ,Can you please help me?can you tell me how you resolved this issue.Our production is down due to
java.lang.IllegalArgumentException: Session: null does not exist.
at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:118)
at com.bea.dsp.management.persistence.primitives.ServerPersistencePrimitives.getDataspaceRoot(ServerPersistencePrimitives.java:73)
at com.bea.dsp.management.activation.ActivationService.dataSpaceAlreadyExists(ActivationService.java:342)
at com.bea.dsp.management.activation.ActivationService.setRequestHandlerClassLoader(ActivationService.java:206)
at com.bea.ld.server.bootstrap.RequestHandlerListener.postStart(RequestHandlerListener.java:46)
Truncated. see log file for complete stacktrace.
Its urgent plz -
Unable to login: SAP System Message: Dynpro does not exist
Hello All,
I'm created a test system to practice our upgrade post steps on. I created a pared down copy of one of our other systems. When I try to login, I get a popup message saying: Dynpro does not exist.
To create the pared down version, we used empty files for:
COEP
GLPCA
BALDAT
MSEG
BSIS
LIPS
LTAP
CE1LPOC
ZHYPFIT
BALHDR
VBFA
COSP
COSB
CDCLS
ZHYPF2A
/IRM0760
CDHDR
COSS
CMFP
CHVW
RESB
ZHYPFIO
AUSP
VBOX
JCDS
VBAP
We don't think these being empty is the problem, but I wanted to mention it just incase it is.
Below is the dev_w0 log. I've been searching Google / SDN / OSS for some of the errors but haven't come up with anything yet.
Any insight you might have into this would be appreciated. Thank you.
~TJ
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 79
M sid Q60
M systemid 324 (IBM iSeries with OS400)
M relno 7000
M patchlevel 0
M patchno 172
M intno 20050900
M make: single threaded, Unicode, 64 bit, optimized
M pid 6396
M
M
M Thu Jan 22 15:12:50 2009
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 6396) [thxxhead.c 1290]
M ThInit: running on host USALSAPU
M calling db_connect ...
C DB4 SQL Reparse Activated
C
C Thu Jan 22 15:12:51 2009
C R3INLPGM: RmtExeLib from /usr/sap/Q60/SYS/exe/run/DBSLDB4RMT
C R3INLPGM: RmtExeLib is KRNQ60700
C DBSLENCWT: rc=0, msg=CPF9897 CONCURRENT WRITE IS ENABLED.
C DbSl/DB codepage check: table or row not found (db_rc=24) - OK.
C === Central DB connect successfull! ===
C === Connection settings ===
C connected = TRUE
C con_hdl = 0
C db_handle = 1
C dbhost = USALSAPU
C rdbname =
C dblib = R3Q60DATA
C r3sysle_changed = TRUE
C query_compl_reval = O
C dbconnecttype = L
C user = Q6079
C qaqqinilib = Default (QUSRSYS)
C dbjobname = WP00
C dbjobuser = Q6079
C dbjobno = 197762
C rmtexelib = KRNQ60700
C parallel_alter_tables = *OFF
C ===========================
C Found only default query options in QUSRSYS/QAQQINI.
C -
C -
DbSl EGO Structure
C -
C SAPSYSTEMNAME = Q60
C Character encoding = UNICODE
C process class = dialog process
C workprocess id = 0
C local host = USALSAPU
C dbhost = USALSAPU
C rdbname =
C dbname = Q60USALSAPU
C dblib = R3Q60DATA
C application server = DVEBMGS79
C Connect type = LOCAL
C pid = 6396
C wpjobname = WP00
C wpjobuser = Q6079
C wpjobno = 197762
C DB2/400 vers. appl. server = PASE 1
C DB2/400 vers. DB server = V6R1
C da_cache_size = 100
C reopen = ON
C timeout_retry = 3
C ODP threshold = 800
C ODP commit thresh. = 810
C ODP open thresh. = 850
C QAQQINI library = Default (QUSRSYS)
C Alternate QAQQINI library = Not specified
C use_lobs_for_long = ON
C use_lobs_for_short = OFF
C single_execution_threshold = 2000
C single_execution_reuse = OFF
C keep_tmp_SQLpkgs = OFF
C dbsl_trace = OFF
C allow_cancel = Try (Unspecified)
C nqe_optimize_method = O - All I/O (compatibility mode)
C nte_list_size = 10
C dbsl_alternate_package = OFF
C -
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090122 151250 USALSAPU
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x7000002d0000000, size: 120000000)
M SHM_ROLL_AREA (addr: 0x7000002e0000000, size: 268435456)
M SHM_PAGING_AREA (addr: 0x7000002f0000000, size: 335544320)
M SHM_ROLL_ADM (addr: 0x700000310000000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x700000320000000, size: 820256)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0x700000330000000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x700000340000000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)
X ES initialized.
B dbntab: NTAB buffers created
B dbntab: Buffer FTAB(hash header) (addr: 0x700000360000088, size: 584)
B dbntab: Buffer FTAB(anchor array) (addr: 0x7000003600002d0, size: 1280008)
B dbntab: Buffer FTAB(item array) (addr: 0x700000360138ad8, size: 5120000)
B dbntab: Buffer FTAB(data area) (addr: 0x70000036061aad8, size: 122880000)
B dbntab: Buffer IREC(hash header) (addr: 0x700000370000088, size: 584)
B dbntab: Buffer IREC(anchor array) (addr: 0x7000003700002d0, size: 1280008)
B dbntab: Buffer IREC(item array) (addr: 0x700000370138ad8, size: 1280000)
B dbntab: Buffer IREC(data area) (addr: 0x7000003702712d8, size: 15360000)
B dbntab: Buffer STAB(hash header) (addr: 0x700000380000088, size: 584)
B dbntab: Buffer STAB(anchor array) (addr: 0x7000003800002d0, size: 1280008)
B dbntab: Buffer STAB(item array) (addr: 0x700000380138ad8, size: 1280000)
B dbntab: Buffer STAB(data area) (addr: 0x7000003802712d8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0x700000390000088, size: 2976)
B dbntab: Buffer TTAB(anchor array) (addr: 0x700000390000c28, size: 1280008)
B dbntab: Buffer TTAB(item array) (addr: 0x700000390139430, size: 3200000)
B dbntab: Buffer TTAB(data area) (addr: 0x700000390446830, size: 23360000)
B
B Thu Jan 22 15:12:52 2009
B dbstat: table statistics switched on for 84171 tables
B dbstat: TABSTAT buffer created (addr: 0x7000003a0000000, size: 41152488)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 23, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0x7000003b0000100, size: 350000000, end: 0x7000003c4dc9480)
B dbtbxbuf: Profile: max_objects = 40000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 104857600
B ***LOG BB0=> buffer TABL started with length 350000000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Buffer TABLP (addr: 0x7000003d0000100, size: 35840000, end: 0x7000003d222e100)
B dbtbxbuf: Profile: max_objects = 2000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 17590656
B ***LOG BB0=> buffer TABLP started with length 35840000 bytes [dbtbxbuf#3 @ 16202] [dbtbxbuf1620 2]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 29 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 80021 * 48 = 3841008
B 4: 40000 * 256 = 10240000
B 5: 80021 * 8 = 640168
B 6: 1 * 200 = 200
B 7: 513 * 8 = 4104
B 8: 262473 * 256 = 67193088
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: 0x7000003f0000108, size: 81920000, end: 0x7000003f4e20108)
B ***LOG BB0=> buffer EIBUF started with length 80000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM (addr: 0x700000400000108, size: 4194304, end: 0x700000400400108)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 40009 * 48 = 1920432
B 4: 20000 * 256 = 5120000
B 5: 40009 * 8 = 320072
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 65617 * 512 = 33595904
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA (addr: 0x700000410000108, size: 40960000, end: 0x700000412710108)
B ***LOG BB0=> buffer CUA started with length 40000k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 416 = 416
B 2: 23 * 40 = 920
B 3: 4001 * 48 = 192048
B 4: 2000 * 256 = 512000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 13500 * 256 = 3456000
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR (addr: 0x700000420000108, size: 4194304, end: 0x700000420400108)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#10 @ 2305] [dbcalbuf2305 ]
B dbtran INFO (init_connection '<DEFAULT>' [DB400:700.08]):
B max_blocking_factor = 20, max_in_blocking_factor = 40,
B min_blocking_factor = 10, min_in_blocking_factor = 10,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 1, prefer_in_itab_opt = 1,
B convert AVG = 1, alias table FUPD = 1,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x3, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Jan 22 15:12:53 2009
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauCreateShm): New block for Security Audit Log allocated in SCSA
M SecAudit(RsauCreateShm): SCSA memory usage: SecAudit = 1152, total = 3048
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = 0x700000040000000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = 0x700000040000768
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = 0x7000000400007a0
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = 0x7000000400007ac
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/Q60/DVEBMGS79/sec, AS=USALSAPU, instanceid=79)
N SsfPseLoad: Downloading file /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse (client: , key: SYSPSE, len: 1872)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M CCMS: AlMsUpload successful for /usr/sap/Q60/DVEBMGS79/log/ALMTTREE (0 MTEs).
M CCMS: start to initalize 3.X shared alert area (first segment).
S
S Thu Jan 22 15:12:54 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x18499b440
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 2 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 400
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 0x700000460000070
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 0x700000460000740
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2272 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A
A Thu Jan 22 15:12:55 2009
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 139532kb, dir_size: 34808kb.
A Attached to PXA (address 0x700000470000000, size 1998848K, 4 fragments of 464832K )
A abap/pxa = shared unprotect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=0x7000000b0577000 leng=20955136 end=0x7000000b1973000)
A >> Shm MMADM area (addr=0x7000000b0a50fa8 leng=244096 end=0x7000000b0a8c928)
A >> Shm MMDAT area (addr=0x7000000b0a8d000 leng=15622144 end=0x7000000b1973000)
A RFC Destination> destination USALSAPU_Q60_79 host USALSAPU system Q60 systnr 79 (USALSAPU_Q60_79)
A RFC Options> H=USALSAPU,S=79,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 47822 bytes at 0x7000004f0000000
N
N Thu Jan 22 15:12:56 2009
N SsfSapSecin: PSE /usr/sap/Q60/DVEBMGS79/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/Q60/SYS/exe/run/libsapsecu.o .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.172.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [17]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N VSI: WP init in ABAP VM completed with rc=0
E
E Thu Jan 22 15:12:58 2009
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Thu Jan 22 15:13:03 2009
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
A
A Thu Jan 22 15:13:07 2009
A *** ERROR => RFC ======> cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62379446
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62377117, {4978D392-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62379446 IDX=2
[abrfcio.c 8185]
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62382527
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62382527 IDX=3
[abrfcio.c 8185]
A
A Thu Jan 22 15:13:14 2009
A *** ERROR => RFC ======> FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
[abrfcio.c 8185]
A RFC 1729 CONVID 62392457
A * CMRC=0 DATA=0 STATUS=0 SAPRC=0 exec_sapgui FUNCTION: 'exec_sapgui'
A FUNCTION: 'exec_sapgui'
A cannot open SAPGUI
A RFC> ABAP Programm: SAPLSLDAG (Transaction: )
A RFC> User: DDIC (Client: 000)
A RFC> Destination: SERVER_EXEC (handle: 3, , )
A RFC SERVER> RFC Server Session (handle: 1, 62381506, {4978D397-D34E-190F-E100-80020A001114})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SLDAPPL_SERV)
A RFC SERVER> Called function module: SLDAG_GET_COMPILED_BITS
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1738
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
FUNCTION: 'exec_sapgui'
cannot open SAPGUI
PROG =rfcexec USALSAPU sapgw79 62392457 IDX=6
[abrfcio.c 8185]
B
B Thu Jan 22 15:13:16 2009
B table logging switched on for client '010'
M
M Thu Jan 22 15:13:22 2009
M AS400_API connected to 'USALSAPU'. DBJob: (197789/QUSER /QXDARECVR )M *** ERROR => AS400_API (APICODE 23) failed with SY-SUBRC = 9 [abas4api.c 1548]
M *** ERROR => Cannot open file '/usr/sap/transD60/config/infoapar.610' [ 0]
A A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:22 2009
A
A ABAP Program SAPMSYST .
A Source SAPMSYST Line 1770.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_RABAX
A Dynpro does not exist.
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Jan 22 15:13:23 2009
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Jan 22 15:13:23 2009
A
A ABAP Program SAPMS380 .
A Source Line 0.
A Error Code DYNPRO_NOT_FOUND.
A Module $Id: //bas/700_REL/src/krn/dynp/dybas.c#6 $ SAP.
A Function dyrdyp.c Line 545.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Dynpro does not exist.
A
M ThIUsrDel: th_rollback_usrdelentry = 1
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c 1384]
S
S Thu Jan 22 15:14:20 2009
S found spool memory service RSPO-ACTIONS at 0x70000046000a478Hi TJ,
you are having definetely other issues, than the ones that might be caused by clrpfm of the tables above ...
But, based on that data, I do not know which ones ;-(
There are dynpro tables like dynpload or d3456t or so not proper ...
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.net - http://www.4soi.de - http://www.easymarketplace.de -
Database startup showing ORA-00942: table or view does not exist in trace
Hi Friends,
SunOS 5.10 Generic_137112-06 i86pc i386 i86pc , 64 Bit
Oracle 10.2.0.1.0
While I am doing a startup, getting following error.
SQL> startup;
ORACLE instance started.
Total System Global Area 3221225472 bytes
Fixed Size 2122544 bytes
Variable Size 410819792 bytes
Database Buffers 2801795072 bytes
Redo Buffers 6488064 bytes
Database mounted.
ORA-01092: ORACLE instance terminated. Disconnection forcedThe alert log shows the following
Errors in file /applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc:
ORA-00942: table or view does not exist
Error 942 happened during db open, shutting down database
USER: terminating instance due to error 942
Instance terminated by USER, pid = 11486
ORA-1092 signalled during: ALTER DATABASE OPEN...A look at the trace file shows this
/applns/oracle/admin/CTSD1/udump/ctsd1_ora_11486.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /applns/oracle
System name: SunOS
Node name: N890
Release: 5.10
Version: Generic_137112-06
Machine: i86pc
Instance name: CTSD1
Redo thread mounted by this instance: 1
Oracle process number: 23
Unix process pid: 11486, image: oracle@N890 (TNS V1-V3)
*** SERVICE NAME:() 2011-02-16 19:24:50.188
*** SESSION ID:(325.3) 2011-02-16 19:24:50.188
Successfully allocated 3 recovery slaves
Using 367 overflow buffers per recovery slave
Thread 1 checkpoint: logseq 45929, block 2, scn 310788795>cache-low rba: logseq 45929, block 3
>on-disk rba: logseq 45929, block 52, scn 310788832
>start recovery at logseq 45929, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 24Kb in 0.31s => 0.08 Mb/sec
Total physical reads: 4096Kb
Longest record: 0Kb, moves: 0/61 (0%)
Longest LWN: 16Kb, moves: 0/3 (0%), moved: 0Mb
Last redo scn: 0x0000.128642df (310788831)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 117/121 = 1.0
*** 2011-02-16 19:24:50.515
KCRA: start recovery claims for 4 data blocks
*** 2011-02-16 19:24:50.515
KCRA: blocks processed = 4/4, claimed = 4, eliminated = 0
*** 2011-02-16 19:24:50.516
Recovery of Online Redo Log: Thread 1 Group 1 Seq 45929 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 4/4 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 121/121 = 1.0
ORA-00942: table or view does not existI have searched MOS and Google, but didn;'t get any relevant results.
Also flushed my shared_pool as mentioned in (http://www.tanelpoder.com/files/oracle_rowcache.pdf) after mount and started , still no luck
Any help is appreciated
Thanks
SSNHi,
Thanks.
Tried log mining, but still couldn't find the culprit. I think now, I have to drop and create this db.Still wondering what might have happened.
select group#,status from v$log;
GROUP# STATUS
1 INACTIVE
3 INACTIVE
2 CURRENT
SQL> select group#,MEMBER from v$logfile where group#=2;
GROUP#
MEMBER
2
/applns/oracle/oradata/CTSD1/redo02.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo02.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=1;
GROUP#
MEMBER
1
/applns/oracle/oradata/CTSD1/redo01.log
1
/applns/oracle/oradata/CTSD1/redolog001.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo01.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redolog001.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.
SQL> select group#,MEMBER from v$logfile where group#=3
GROUP#
MEMBER
3
/applns/oracle/oradata/CTSD1/redo03.log
SQL> EXECUTE sys.DBMS_LOGMNR.ADD_LOGFILE( LOGFILENAME => '/applns/oracle/oradata/CTSD1/redo03.log',OPTIONS => sys.DBMS_LOGMNR.NEW);
PL/SQL procedure successfully completed.
SQL> EXECUTE sys.DBMS_LOGMNR.START_LOGMNR;
PL/SQL procedure successfully completed.
SQL> SELECT COUNT (*) FROM v$logmnr_contents WHERE operation = 'DDL';
COUNT(*)
0
SQL> EXECUTE sys.DBMS_LOGMNR.END_LOGMNR();
PL/SQL procedure successfully completed.SSN -
DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3
Hi All,
We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
Can anyone advise how to solve the issue? Please find below portion of the short dumps.
Category ABAP Programming Error
Runtime Errors DBIF_RSQL_TABLE_UNKNOWN
ABAP Program SAPLCLVF
Application Component CA-CL-CL
Date and Time 11.06.2014 12:08:28
Short text
A table is unknown or does not exist.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLCLVF" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A table is referred to in an SAP Open SQL statement that either does not
exist or is unknown to the ABAP Data Dictionary.
The table involved is "AUSPN_V1" or another table accessed in the statement.
Source Code Extract
Line SourceCde
104 if dupl = kreuz.
105 insert auspc_v2 client specified from table auspcv2
106 accepting duplicate keys.
107 else.
108 insert auspc_v2 client specified from table auspcv2.
109 if syst-subrc ne 0.
110 message a585 with tabausp.
111 endif.
112 endif.
113 refresh auspcv2.
114 endif.
115 read table auspcv3 index 1.
116 if syst-subrc = 0.
117 if dupl = kreuz.
118 insert auspc_v3 client specified from table auspcv3
119 accepting duplicate keys.
120 else.
121 insert auspc_v3 client specified from table auspcv3.
122 if syst-subrc ne 0.
123 message a585 with tabausp.
124 endif.
125 endif.
126 refresh auspcv3.
127 endif.
128 read table auspnv1 index 1.
129 if syst-subrc = 0.
130 if dupl = kreuz.
131 insert auspn_v1 client specified from table auspnv1
132 accepting duplicate keys.
133 else.
>>>>> insert auspn_v1 client specified from table auspnv1.
135 if syst-subrc ne 0.
136 message a585 with tabausp.
137 endif.
138 endif.
139 refresh auspnv1.
140 endif.
141 read table auspnv2 index 1.
142 if syst-subrc = 0.
143 if dupl = kreuz.
144 insert auspn_v2 client specified from table auspnv2
145 accepting duplicate keys.
146 else.
147 insert auspn_v2 client specified from table auspnv2.
148 if syst-subrc ne 0.
149 message a585 with tabausp.
150 endif.
151 endif.
152 refresh auspnv2.
153 endif.Hello
Please check on transaction SE11 if this table exists and if it is active.
Also, it may be a database issue. What is your database?
BR
Caetano -
Namespace Errors System Error 1355 - Specified domain does not exist or could not be contacted
Ok, lets start with my environment:
dc1 - windows server 2003 r2
dc2 - windows server 2012 r2
fs1- windows server 2003 r2
fs2 - windows server 2012 r2
Namespace - \\<fqdn>\data (the fqdn would be like contoso.microsoft.com)
I am in the process of migrating everything from server1 to server2 (dc and fs listed above). I am done with mostly everything except DFS. I have migrated the data, setup permissions, shares, etc. and replicated the data between fs1 and fs2.
I have verified that all data is currently replicated and up to date, so no backlogs. I am trying to add dc2 and fs2 as namespace servers. This is so that I can point all of the referrals to FS2 that way when I remove FS1 no one gets an error
about not being able to find the files. The problem is that from all 4 servers, I receive an error message when loading the namespace via DFS Management tool. I then thought because of the drastic differences between the versions, the next best
thing would be to export the namespace and then import it into the new server, but even attempting the export command (dfsutil) gives me the same error. My suspect is that the original namespace server was removed sometime ago without the previous IT
person properly migrating everything (but I am at a loss cuz here I am). I then thought if I go through ADSIedit, I can change the namespace server to the new one for all of my shares, and then possibly be able to load the namespace within the MMC tool
(again just a guess); however, I cannot find anything listed for namespace or remoteservers under the properties of the share.
Note: the namespace does work when I navigate to it from a PC. \\contoso.microsoft.com\data does bring up folders and files. (changed the name for obvious reasons)
At this point, I just want to have my new namespace server, so that I can change the referrals, and decommission my other servers. (And yes there are many other steps I need to perform for the decommissioning, but that's not the point of this). I
have read numerous articles on this and haven't found a way to accomplish what I want. Even though I walked through the steps listed for those issues and unfortunately they either did not apply or did not work. I prefer to not use ADSIedit if at
all possible, simply because it's not the "clean" way of doing things, but if I have no other option then I have no other option.
Edit 1: In event viewer on dc1, under File Replication Service on the left hand side, I see the following error appear numerous times (not every day, but still a lot). I have not performed any of the steps listed simply because
I do not know if this pertains to my problem and I don't want to start troubleshooting a server I plan on decommissioning unless I need to (say for the above issue):
Event ID: 13568
Source: NtFrs
Description:
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Edit 2: I have verified that firewalls are off and I can communicate to all 4 servers from each other.
Edit 3: Attempted to try and fix error reported in 'Edit 1'; however the registry key mentioned does not exist (looked at all 4 servers to verify).I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
"The key 'LocalizedPerfCounter' does not exist in the appSettings" when creating Socket
Hi all,
Some time ago, I've installed the nuGet package for self-hosted signalR applications on a project. Today, I went to start a completely unrelated project, one that does not have that package (or any package at all), and has absolutely nothing to do with owin,
asp.net, signalR or anything else related to that package.
Now in this project, when I try to create a Socket, I get an InvalidOperationException: "The key 'LocalizedPerfCounter' does not exist in the appSettings".
The exception seems to be handled and the program proceeds, but it's annoying.
Also, I'm seriously concerned. Here I'm not trying to create some arcane ASP.NET thing that calls down into a dozen layers and six different configuration frameworks before actually getting to the TCP stack. I'm doing a plain straight new Socket(AddressFamily.InterNetwork,
SocketType.Stream, ProtocolType.Tcp).
How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to affect something that resides in the basic System.dll? What business does it have interfering with very low-level network calls?Hello Zappo,
For this InvalidOperationException, please check this hotfix to see if you are under those scenario:
http://support.microsoft.com/kb/2784156
>> How is it possible for a nuGet package that installs unrelated DLLs to another solution entirely to…
For this, since it is related with the NuGet, I suggest that you could post it to the NuGet forum,
https://nuget.codeplex.com/workitem/list/basic
The current forum is specifical for .NET Framework Class Libraries.
Discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. Discuss and ask questions
about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection.
Thanks&Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Table does not exist at dw.insertrow(0)
Hi,
I am trying to update an old PB app.
Background of the basic database structure:
my_data Table:
col1
col2 -- lookup to an_old_table.id
col3 -- newly added as lookup
my_new_lookup Table:
code -- 'linked' to col3 above
description
an_old_lookup table:
id -- 'linked' to my_data.col2
text
I have created a new lookup table in our oracle database, and added an extra column to an existing table this column matches the lookup code and we can pull the full description of the item from there.
I would like to add the new lookup table as a dropdown list in a window of my app.
There is already a dropdown list which does exactly this, displaying an_old_table.text in the dropdown but updating my_table.col2 with the id value.
I have attempted to duplicate this functionality exactly but with data from my_new_lookup to my_data.col3, but am failing somewhere.
I have created a new d_dddw_mynewdropdown, which in the preview window lists all my_new_lookup.description values from the database correctly.
In the datawindow, I added a column control, changed the edit to DropDownDW, making sure the DataWindow is d_dddw_mynewdropdown and display and data columns matched description and code respectively.
When I do a retreive on the datawindow within powerbuilder, with a record from the my_data table a dropdown box appears correctly in the preview window with the value matching the correct lookup description, so it is flowing through col3 > code > description correctly.
The datawindow is embedded into an application window, and this is where I think it is failing... The window has two datawindows on it and part of the open() function does:
If dw_one.Retrieve(ln_id,) > 0 Then
ll_row = dw_one.GetRow()
If dw_one.ShareData (dw_two) <> 1 Then
MessageBox ("Error", "Error in sharing data.")
Else
dw_two.ScrollToRow (ll_row)
End If
Which passes (IE does not display the message box)
It then executes:
dw_one.InsertRow(0)
dw_two.InsertRow(0)
Which is where the application displays an error message which says:
Select Error: ORA-00942: table or view does not exist
I stepped through the code in debug mode and discovered the error message comes from the dw_one.InsertRow(0) line.
If I press ok to the error, the application continues to run, but the value of the dropdown box is my_data.col3 (the 'linking' code, not the full description) and the dropdown when pressed is empty.
I am not sure what I have done wrong.. In powerbuilder itself everything seems to be working and connecting together as it should when I preview the data in the datawindows, but something about the application window has issues.
Has anyone experienced similar things? I do not know where else to look to fix this.
Thanks.This is correct. The application starts with a log in screen (we have over 80 users) the application then connects to the database using the credentials entered into the login screen.
The table was created under the db admin account.
I have very little Oracle experience. what would be the best way to do it so that all users who have access to the application also have access to this table?
From what I can work out, the application uses the "Other Users" folder under in the database tree in Oracle SQL Developer. The DB admin account is not in the list of users in this folder..
When I use the application and log in using the db admin credentials there is no error! So I just have to work out how to give all the users access to this table?!
is the
alter session set current_schema= <username of table creator>.
a PowerBuilder command that I should run after the users log into the app? or is it an Oracle Query?
Thanks! this is down the right track..
I ran a select * from all_tables query and compared the new table with others that are successfully being used by the application.. as far as I can see, they are exactly the same in terms of OWNER, TABLESPACE_NAME, CLUSTER_NAME, STATUS, BUFFER_POOL... The only thing different is my new table has GLOBAL_STATS = YES where the rest have NO.. not sure if that makes any difference..
The OWNER column is the database admin user for all tables used by the application
I also checked the DBA_TAB_PRIVS table and it has all the same info as the other tables aswell.. not sure where else to look. -
Table does not exist when creating FK Constraint across schemas
Hi all,
This will probably boil down to a permissions issue since I'm sketchy on the various levels....
I'm testing a conversion to Oracle from our legacy system. There are 4 schemas which I've created and each of those schema users have been granted DBA roles.
After creating a number of tables I wrote the SQL to create the FK Constraints. Most of them went in, but the ones crossing schemas don't. Logged in as SYS, I can do a select from each table, I can even JOIN the two in the SELECT. However when I try creating the constraint it give me a: ORA-00942: table or view does not exist
ALTER TABLE USERA.TABLEA ADD FOREIGN KEY (COLA) REFERENCES USERB.TABLEB (COLA) ON DELETE CASCADE
Again, I have scads of commands that went in correctly so this must be a permissions type thing. I'm the only one logged into the database since it's my own test system. This is 10g BTW.
If you have any suggestions as what to look into, please explain how to actually perform the checks since I'm still learning how to get around.
Thanks very much!To bulk grant, you can use dynamic SQL; somthing like this:
<BR><BR>
SQL> declare
2 l_grantor VARCHAR2(30) := 'USERA';
3 l_grantee VARCHAR2(30) := 'USERB';
4 begin
5 for table_rec in (select owner,table_name from all_tables where OWNER=l_grantor) loop
6 execute immediate 'GRANT REFERENCES ON '||table_rec.OWNER||'.'||table_rec.TABLE_NAME||' TO '||l_grantee;
7 end loop;
8 end;
9 /
Maybe you are looking for
-
Hi, My imac G5 was revving up quite a bit and acted like I was downloading something all the time. I thought it might just need the fans to be cleaned but I took it into the genius bar and was told that they guy "thinks" that I need a new logic board
-
What is margin shift and how does t effect a mixed doc/pic?
just trying to figure out how margin shift being on or off while copying will effect my mixed doc/pic?
-
please explain how i can do this
-
Exceptional material ecise rate
hi, I have maintain exceptional material ecise rate at J1ID, however rate is not coming to J1IEX trasaaction (only po rate is coming). Can any one share how to populate exceptinoal excise rate? reg mrs
-
Getting error as RGSUM could not be updated.In j1iex when we change material type from raw to consumable.in j1id they have maintained mat type as consumable which was raw earlier at the time of po creation.