Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

Hi Guys,
I am facing very critical issue on down Payment request, to process with saperate Tax Value.
We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
Below is the error message:
Down pmnts with taxes are not permitted when processing with jur.code
Message no. FS206

HI Preeti,
Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
Did any one seen this case in your experiece, if yes, what is the work-around solution?.
Need your help guys!,...
Regards,
Damodar Naidu

Similar Messages

Error FS206 Down pmnts w/ taxes not permitted when processing with jur.code

Issue: I am encountering a problem entering Taxes when applying down payments received from customers since we are using a jurisdiction code taxation procedure. This process works as desired in Europe for our firm. I found OSS 97288 which is not valid for version ECC 6.0. Please assist due to US go-live in 2 weeks.Process: Create Down Payment Request for cash in advance. Required to tax at this point. Billing document creates a noted item in the G/L (Special G/L). I apply customer's payment via transaction F-29 and receive error "FS206 Down pmnts with taxes are not permitted when processing with jur.code."
Settings: 1) Alternative Recon account for Special GL posting has The tax category on the GL account = B "Output tax - down payments managed gross." 2) Transaction OBXB specifies tax clearing account for transaction key MVA. This G/Laccount has same tax category setting (B). My settings work perfectly for Europe since they are not taxed via juridicition codes.
Thank you in advance!

Check the GL master of the alternative recon account. Ideally there should be no setting in the tax fields as there is no tax calculated on down payment but only on the final amount. Leave the tax fiel blank and do not check mark posting without tax allowed.

Books are not saved when created with iPhoto 09

When creating a book, everything is normal but the book is not saved in the computer. So I have to finish the project and order It. The name of the book is still listed on the left but there's no photos or text. I also have a book that seems corrupted because when i try to open the file iphoto jams and i'm not able to remove the corrupted book because the file can't be opened.
Please help me

Welcome to the Apple Discussions. Sounds like a damaged database file. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
Click to view full size
Also what system and iPhoto versions are you running?
Happy New Year

Database fileds are not coming when connecting with ado and they are coming when connecting with odbc

Post Author: yagya
CA Forum: .NET
Hi , I am using crystal report XI R2 in visual studio 2005 . Backend is sql server 2000. I have made a connection with odbc connectivity and using dsn. I am using a stored procedure as datasource of report. It is working fine all the database fields are available. Now when i try to connect with the ado connection having same stored procedure as datasource of report , I am not getting data fields. I dont know where is the problem in my stored procedure or in report. But when i connect through system dsn using odbc connectivity everything is working fine. A MAP filed dialogue box appears when i try to change the datasource location to ado from odbc.

There is a barely acknowledged issue. For Mac users Apple has released an update to the app, but for iOS users the recommendation is for users to update their ipad to the most recent operating system.
There may be a fix coming for iOS6 users (which seem to be many of those having problems) or there may not be. If your ipad isn't up to date then you can update it and see if that helps, or if you don't want to update then you may want to wait and see if there is either a fix or if it fixes itself.

SelectInputText With AutoSubmit, does not submit when used with LOV.

Hi,
I am using ADF with ADFBC (Jdeveloper 10.1.3.3). I have a selectinputText (With AutoSubmit = true and immediate = true) component that links to a LOV dialog. When I enter values by hand and navigate out of SelectInputText, it submits the form and everything works well. But When I choose to use LOV, although its value is changed, it does not submit the form. I tried on Return Listener to set its value with no avail. I tried field.setSubmittedValue(null) and field.setValue, field.resetValue, But I couldn't get the same behaviour when I enter values by hand. So my problem is When return from LOV selectinputText does not submit the form. How can I have the form submitted when returned from LOV? Any help is appreciated.
Best Regards,
Salim

Well I was a bit to impatient to create a test case and wait what might come out. So I investigated a bit and found out:
The code in my managed bean for the value change listener is executed, when I change the field content directly. There is code placed like this:
public void invoiceAddressPartnerNrChange(ValueChangeEvent valueChangeEvent) {
int no = (Integer)this.getEditInvoiceAddressPartnerNo().getValue();
//valueChangeEvent.getNewValue() maybe use this in future...
this.getEditInvoiceAddressPartnerId().resetValue();
AttributeBinding ab =
(AttributeBinding)getBindings().getControlBinding("AllPartnersInvoiceAddressId");
int id;
// 1. Access the FacesContext
FacesContext fc = FacesContext.getCurrentInstance();
// 2. Create value binding for the #{data} EL expression
ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
// 3. Evaluate the value binding, casting the result to BindingContext
BindingContext bc = (BindingContext)vb.getValue(fc);
// 4. Find the data control by name from the binding context
DCDataControl dc = bc.findDataControl("HdsServiceDataControl");
// 5. Access the application module data provider
ApplicationModule am = (ApplicationModule)dc.getDataProvider();
// 6. Cast the ApplicationModule to its client interface
HdsServiceImpl service = (HdsServiceImpl)am;
// 7. Call a method on the client interface
id = service.getPartnerId(no);
//return "SomeNavigationRule";
ab.setInputValue(id);
this.getEditInvoiceAddressPartnerId().setValue(id);
But this method will NOT be executed when the field content is changed by the LOV's returning value.
So I searched for another method and found the return listener of the field to be adequate. There I placed similar code by use of the return value:
public void test(ReturnEvent returnEvent) {
Object o = returnEvent.getReturnValue();
int no = Integer.parseInt(o.toString());
this.getEditInvoiceAddressPartnerId().resetValue();
this.getEditInvoiceAddressPartnerNo().resetValue();
AttributeBinding ab = (AttributeBinding)getBindings().getControlBinding("AllPartnersInvoiceAddressId");
int id;
// 1. Access the FacesContext
FacesContext fc = FacesContext.getCurrentInstance();
// 2. Create value binding for the #{data} EL expression
ValueBinding vb = fc.getApplication().createValueBinding("#{data}");
// 3. Evaluate the value binding, casting the result to BindingContext
BindingContext bc = (BindingContext)vb.getValue(fc);
// 4. Find the data control by name from the binding context
DCDataControl dc = bc.findDataControl("HdsServiceDataControl");
// 5. Access the application module data provider
ApplicationModule am = (ApplicationModule)dc.getDataProvider();
// 6. Cast the ApplicationModule to its client interface
HdsServiceImpl service = (HdsServiceImpl)am;
// 7. Call a method on the client interface
id = service.getPartnerId(no);
//return "SomeNavigationRule";
ab.setInputValue(id);
this.getEditInvoiceAddressPartnerId().setValue(id);
Since this method is executed, my calulation works both ways: Directly entered values and values coming back from the LOV.
Maybe this is kind of trivial and my code is a bit crappy, but it is a solution.
What I don't like is the redundance in the code I needed to implement twice..

Postings to G/L accounts with open item management are not permitted in ASKB

Hi Gurus,
I have the error FAGL_POST_SERVICE012 'Postings to G/L accounts with open item management are not permitted' when i run the transaction ASKB. The very strange thing is that in table APERB_ITEMS for this company code there isn't any record. My questions are:
1. The ASKB posts only if the APERB_ITEMS is populated?
2. If yes, Why the ASKB wants to create postings on this company code?
3. If no, which are the logic conditions that include a asset in the ASKB execution?
4. If the logic is correct, how i can to run the ASKB on OI accounts?
Thanks in advance,
Best Regards,
Emanuele

Hi ,
I believe you know why do you run transaction code ASKB if not please see below
The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
There are various possible ways of posting APC values:
To an account set within the original company code
To an account set of an alternative company code
To an account set directly in a special ledger
The account set can be determined from a different depreciation area.
Derived depreciation areas can be treated as real depreciation areas. This means that the system posts APC differences rather than special reserves, as was the case up to now.
During a test run, the system completes all accounting checks (for example, budgetary control of objects belonging to Funds Management).
While doing above system reads and update table APERB_ITEMS . If you look to Program for ASKB is RAPERB2000 and if you take your ABAper help to under the coding he will tell you that is program use APERB_ITEMS to update and read.
MANY THANKS
REGARDS
Preeti Agarwal

Error: Reason codes with automatic charge-off are not permitted here(F-28)

Hi All
I creted a reason code in obxl t-code and assigned a gl code in OBXL transaction code, But when I am trying to clear a payment with reason code in F-28, System is throwing the following error..Can some one tell me why i am getting this error?
Reason codes with automatic charge-off are not permitted here
Message no. F5605
Diagnosis
The reason code entered is designed to ensure that the payment difference amount is posted to an account specially set up for this purpose. Postings of this nature usually require additional specifications (e.g. tax code, business area). If the difference stems from a single open item, the necessary specifications can be taken from that item. In the case that led to this error message, however, the difference does not stem soley from one item, which means that this method cannot be used.
System Response
The reason code entered is not accepted.
Procedure
You can either select a different reason code, which would create a new open item for the customer or vendor OR write off the difference using the function Charge off diff.. This function either takes you into a pre-configured account assignment model or into the document overview. From here you can enter the required difference postings.

Hi Venkata,
It seems while entering the payment (partial payment / residual items) ... you are clearing multiple items with differences. (e.g. if the difference amount is $30, then may the difference consists of two invoices underpaid by $15 each). In this scenario, F-28 doesn't know which additional account assignment fields should be picked up ... hence the error.
First of all, to validate that this indeed is the case, try clearing a payment with the same reason code where difference can be attributed to a single invoice. If you still get an error, then there is some other problem.
Then, to take care of a the business scenario where the difference can indeed be due to multiple documents, select "charge off difference" option and create an entry to post the difference as necessary.
HTH,
Manish Patel
Sr. SAP Solutions Consultant

Postings to G/L accounts with open item management are not permitted Messag

HI All,
Me activiated New GL. and when I am trying to post the
document, I am getting the below error.
The GL used 200100 is Cash A/c (40)
Cr Eq Share Capital A/c (50)
As Cash A/c requires Clearing, I have activated "Open Item Management".
Can you advice me why Its giving me the below mentioned error.
Thanks
Postings to G/L accounts with open item management are not permitted
Message no. FAGL_POST_SERVICE012
Diagnosis
You use G/L account 200100 in company code RLIF with open item
management. However, postings are not permitted to G/L accounts in
individual ledgers with open item management.
Procedure
If you have not yet made any postings to this account and if the
account is to be used for closing processes in non-leading ledgers,
deactivate the Open Item Management indicator in the company code data
for the G/L account.
Thanks,
Niranjan Yandamuri

Hi,
Please, refer to note 1646466 for the info on this message.
Regards,
Eli

Posting to gl a/c with open item management are not permitted.

hello,
When i run FAGL_FC_VAL it display the report and generate the batch input session.
But when i run the session the error massage appear -
"posting to gl a/c with open item management are not permitted."
When i post the same gl mannually, it doesn't show any error.
The Same Problem appear when i run the session generated from FAGLF101- the regrouping program.
Can any body give some idea, what should be done.
Thanx
Subodh

Hello this is chandu,
When u run the fc val it posts the ex gain or loss to respective a/cs.Means those a/cs are not B/S a/cs.Only B/S a/cs we select open item management which r require to maintain on OI management basis.
So try to maintain other a/cs for ex gain and loss y bcoz once u post any transaction in those a/cs which r created already on O Item mgnt basis u cannot change that again.
Then assign those a/cs to automatic postings and run the rc val again
May it will be useful to u
Thank u

Postings to G/L accounts with open item management are not permitted

Dear all,
i am getting one error FB01L ledger specific posting for ledger group L2 ledger (IFRS) error is "postingst o GL accounts with open item management are not permitted " i am posting both gl accounts are balance sheet account, please help me how to resolve the problem .
Message no. FAGL_POST_SERVICE012
Reregards
rajashekhar

Dear all,
Thanks for reply, The error message appears FAGL_POST_SERVICE012 because it is generally not permitted to use the O/I managed account as an adjustment account.It is not possible to post on Individual Ledger (on a Leading or non-leading) on OI Account. This is for your informations
We want to post ledger specific for L2 ledger i am getting above error can help me how to sovle the problem , otherwise any alternaitve solution for posting L2 Ledger

FB50L error: Postings to G/L accounts with open item management are not permitted

Dear All
I need your help.
I am trying to do some adjustment to GR/IR clearing account in Non-leading ledger. Since for this account open item management is ticked, I am getting an error message 'Postings to G/L accounts with open item management are not permitted'.
Now I have checked the forum to find some solution...but does not fit my requirement.
I cannot create a new account. I cannot change the existing account. I tried OBA5, but the message persists.
I also checked the notes.
Appreciate a response on how the post to open item managed accounts in non-leading ledger.
Regards
Kunaal

Hi Kunaal
Usually, OIM accounts are not allowed for Non Leading Ledger postings... With EhP4 or 5, i guess, a new feature is added in GL Master whereby you can specify that a GL will be OIM for Leading Ledger and Not OIM for a Non Leading Ledger
Regards
Kavita Agarwal

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?

I am using iphone4 and recently updated to 7.0.4 from then onwards having issues with phone book. It will open but not able to scrool up and down and all options are not working. Is any one facing same issues?
Why apple also doing such kind of softwares? Cant they do testing before releasing the product?
Could any one help me out of this?
Thanks,
Rajesh

See this discussion...
https://discussions.apple.com/message/23731048#23731048

MRER - Error - different tax coutries not permited in one document

Dear Expert,
I am facing problem while processing MRER transacation, System is throwing the error message - Different tax countries not permited in one document.
I am trying to post w.r.t the PO/ Material document, My PO type is Distributed release order ( Return PO)
But when i tried to post the same document through MIRO transaction( Credit memo) , i can able to post successfuly without any error.
I have checked following things for ERS( evaluated receipt settlement).
Creating PO & GR trough Idoc, no manual creation.
1. Vendor master is marked for ERS.
2. ERS is active in PO.
3.For me Vendor is belong to Poland(PL), Comapany code is : Germany(DE) , and Plant is Hungery(HU).
4.in FTXP for a country DE(Germany) reporting courty has been defined as "HU" Hungery & for Hungary(HU) there is not any reporting courty defined.
5.Tax code which is mantained is available for both HU, DE,
6.plant is active as a abord plant.
I hope all these setting are OK, if any thing is wrong please guide me.
Requested all of you please guide me , what is going wrong while processing the MRER / MRRL transaction.
or is there any standard SAP note is there for such scenarios & that i have to implement, if yes , it will be greate help if i will get the SAP notes.
Appreciated your ernest help on above.
Thanks & Regards
Om

hi
The system issues this error message if different tax codes are used with different reporting countries (T007A-LSTML) in the billing document and this billing document also generates a customer line item.
Different reporting countries are required for the 'Plants abroad' function. However, the plants abroad billing document does not generate a customer line item, which is why the system does not issue this error message in this case.
plz check the tax code and counties

Why is my macbook DVD player no longer playing commercial DVD's that it used to play perfectly? It reads the disc, but then says not permitted when I hit play. It is much older than 12 months warantee so I hope there is an easy fix?

The macbook reads a disc, and opens up DVD player but then says not permitted when I hit play, or any other button. Sometimes the initial music plays, but the screen remains black and then it all stops. These are shop bought DVD's that have previously worked on here, and work in DVD players, but have suddenly stopped. The computer is much older than the12 months warantee so I hope there is an easy fix? Thankyou!

Three things you can try:
1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
2. Perform an SMC reset:
Resetting the SMC (System Management Controller) on Intel-based Macs:
http://support.apple.com/kb/ht3964 and
http://support.apple.com/kb/HT1237?viewlocale=en_US
Resetting your Mac's PRAM and NVRAM:
http://support.apple.com/kb/ht1379
If you are using a Wireless Keyboard:
http://support.apple.com/kb/TS3273
3. Try the free DVD player VLC:
http://www.videolan.org/vlc/
which performs better than the built-in DVD Player.

Error: Common entries are not permitted for plan queries and input queries

Hi,
I have a 2 selections in the column struct:
1. year = 2005, version = actual
2. year = 2006, version = plan, marked as data can be changed using user entry or planning function
row has posting periods from 1-12
in the workbook I have inserted this query in the workbook in analysis grid. it runs good.
now i added a button and assigned planning function to it. this planning function copies 2005, actuals to 2006, plan.
when i execute the workbook and hit this button, it gives me following error:
"Common entries are not permitted for plan queries and input queries"
please can anyone provide me assistance with this issue.
thanks,
sam

when i go to diagnosis it displays following:
Diagnosis
InfoProvider ZIP_PLAN2 must be described in this application by both a plan query and by a input-ready query, which is directly defined on the InfoProvider ZIP_PLAN2.
System Response
This is not permitted.

Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

Similar Messages

Maybe you are looking for