Downgrade 11g to 10g

Hi all
I have 2 questions
1) Is it possible to downgrade a the DB from 11.2.0.1 to 10.2.0.1.If yes please describe by step wise with syntax.
2)Now i have the export dump of 11g. How could i go for downgrade.
OR
I have 11g installed on the PC from where i can get the new export. Is it mandatory to install 10g on same machine for import towards downgrade. or that export can work with other machine?
Your precious ideas are warmly welcome...
Thanks in advance

Hi,
Refer MOS tech note:
1) Is it possible to downgrade a the DB from 11.2.0.1 to 10.2.0.1.If yes please describe by step wise with syntax. *How To Downgrade From Database 11.2 To Previous Release (includes 11.2.0.3-11.2.0.1) [ID 883335.1]*
2)Now i have the export dump of 11g. How could i go for downgrade.Refer thread:
Importing 11g dump into 10g windows
thanks,
X A H E E R

Similar Messages

Cloning Oracle 11g to 10g

Hi Guru's,
I have a query regarding clonning DB from 11g o 10g.
Machine A is on linux with DB Version 11g and machine B is on windows with DB Version 10g. Is it possible to clone DB 11g which is on Linux machine to DB 10g which is on Windows machine.
Kindly advice over the same

By definition a clone is an exact copy, so if you clone your 11g DB you will have another 11g DB. The only way to make it 10g is to change it in some way. Downgrade, for example.
Have you already read through the Oracle docs?
http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmxplat.htm#CHDFHBFI
http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmdupdb.htm#i1008564
I very much doubt RMAN will allow you to downgrade the DB while duplicating it.

Deployment from 11g to 10g connection string cannot get provider error.

Hi, I'm doing a deployment from oracle client 11g to 10g. Is this possible? there are yes and no answer I have try out from the forum. All did not workout with any of the configuration setup.
For development I am using VS2012, MVC 4. EF 4. Oracle 11g
The server is currently running Oracle 10g with Oracle.Dataaccess.dll 10.2.0.100
This is my connection string setup at the server.
<?xml version="1.0"?>

<configuration>
<configSections>

<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=4.4.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false"/>
</configSections>
<connectionStrings>
<add name="OraAspNetConnectionString" connectionString="Data Source=dtsr;User Id=ids;Password=pwd;" providerName="Oracle.DataAccess.Client"/>
<add name="OraAspNetConnectionString2" connectionString="Data Source=dtsr;User Id=ids;Password=pwd;" providerName="Oracle.DataAccess.Client.OracleConnection"/>
</connectionStrings>

<appSettings>
<add key="webpages:Version" value="2.0.0.0"/>
<add key="webpages:Enabled" value="false"/>
<add key="PreserveLoginUrl" value="true"/>
<add key="ClientValidationEnabled" value="true"/>
<add key="UnobtrusiveJavaScriptEnabled" value="true"/>
</appSettings>
<system.data>
<DbProviderFactories>
<add name="Oracle Data Provider for .NET" invariant="Oracle.DataAccess.Client" description="Oracle Data Provider for .NET" type="Oracle.DataAccess.Client.OracleClientFactory,Oracle.DataAccess,Version=4.112.3.0,Culture=neutral,PublicKeyToken=89b483f429c47342" />
</DbProviderFactories>
</system.data>
<system.web>
<compilation targetFramework="4.0">
<assemblies>
<add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.Helpers, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.Mvc, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
<add assembly="System.Web.WebPages, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
</assemblies>
</compilation>
<httpRuntime/>
<authentication mode="Windows"/>
<identity impersonate="true"/>
<pages controlRenderingCompatibilityVersion="4.0">
<namespaces>
<add namespace="System.Web.Helpers"/>
<add namespace="System.Web.Mvc"/>
<add namespace="System.Web.Mvc.Ajax"/>
<add namespace="System.Web.Mvc.Html"/>
<add namespace="System.Web.Optimization"/>
<add namespace="System.Web.Routing"/>
<add namespace="System.Web.WebPages"/>
</namespaces>
</pages>
<sessionState mode="InProc" timeout="20" cookieless="false"/>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<handlers>
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_32bit"/>
<remove name="ExtensionlessUrlHandler-ISAPI-4.0_64bit"/>
<remove name="ExtensionlessUrlHandler-Integrated-4.0"/>
<add name="ExtensionlessUrlHandler-ISAPI-4.0_32bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness32" responseBufferLimit="0"/>
<add name="ExtensionlessUrlHandler-ISAPI-4.0_64bit" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" modules="IsapiModule" scriptProcessor="%windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll" preCondition="classicMode,runtimeVersionv4.0,bitness64" responseBufferLimit="0"/>
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="GET,HEAD,POST,DEBUG,PUT,DELETE,PATCH,OPTIONS" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0"/>
</handlers>
<security>
<authorization>
<add accessType="Allow" users="?"/>
</authorization>
</security>
</system.webServer>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="System.Web.Helpers" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="2.0.0.0"/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="0.0.0.0-4.0.0.0" newVersion="4.0.0.0"/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.WebPages" publicKeyToken="31bf3856ad364e35"/>
<bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="2.0.0.0"/>
</dependentAssembly>

</assemblyBinding>
</runtime>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory, EntityFramework"/>
</entityFramework>
</configuration>
I get this error when page trying to connect to database.
[ProviderIncompatibleException: An error occurred while getting provider information from the database. This can be caused by Entity Framework using an incorrect connection string. Check the inner exceptions for details and ensure that the connection string is correct.]
System.Data.Entity.ModelConfiguration.Utilities.DbProviderServicesExtensions.GetProviderManifestTokenChecked(DbProviderServices providerServices, DbConnection connection) +163
System.Data.Entity.ModelConfiguration.Utilities.DbConnectionExtensions.GetProviderInfo(DbConnection connection, DbProviderManifest& providerManifest) +39
System.Data.Entity.DbModelBuilder.Build(DbConnection providerConnection) +46
System.Data.Entity.Internal.LazyInternalContext.CreateModel(LazyInternalContext internalContext) +62
System.Data.Entity.Internal.RetryLazy`2.GetValue(TInput input) +117
System.Data.Entity.Internal.LazyInternalContext.InitializeContext() +453
System.Data.Entity.Internal.InternalContext.GetEntitySetAndBaseTypeForType(Type entityType) +18
System.Data.Entity.Internal.Linq.InternalSet`1.Initialize() +56
System.Data.Entity.Internal.Linq.InternalSet`1.get_InternalContext() +15
System.Data.Entity.Infrastructure.DbQuery`1.System.Linq.IQueryable.get_Provider() +37
I have check the
1. Enviroment Variables path is set to the 10.../client_1/
2. Tnsname.ora already configured.
3. machine.config did not define the connection string path, as it is define in the web.config
4. Oracle.Dataaccess.dll is in the bin of my application website (v4.112.3.0).
5. In my application web bin folder also include additional dlll.
mfc71.dll
msvcr71.dll
oci.dll
ociw32.dll
orannzsbb11.dll
oraocci11.dll
oraociicus11.dll
OraOps11w.dll
Anyone please help.. Thanks in advance..
Edited by: 976886 on Dec 13, 2012 7:46 PM

976886 wrote:
I want to know, it is possible to migrate the application from oracle 11g to 10g? such that the component are supported across?
Because in the development, all goes well, no error on the oracle connection.
OR did I miss out anything that causes it not working on my server deployment?yes
yes
yes
how can we reproduce what you claim?

How to install oracle 11g or 10g

i am just novice to oracle. i ned help on hw to download and install a standalone 11g or 10g on my laptop with windows7, 3GB, AMD Athlon II x2, 320GB. MY Email is [email protected]

Hi
this is step by step installation guide
http://download.oracle.com/docs/cd/E11882_01/install.112/e10875/toc.htm
also below link for download
http://www.oracle.com/technology/software/products/database/index.html
hope this helps
Zekeriya

Data pump import from 11g to 10g

I have 2 database: first is 11.2.0.2.0 and second is 10.2.0.1.0
In 10g i created database link on 11g
CREATE DATABASE LINK "TEST.LINK"
CONNECT TO "monservice" IDENTIFIED BY "monservice"
USING '(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = host)(PORT = port))) (CONNECT_DATA = (SID = sid)))';
And execute this query for test dbLink which work fine:
select * from v$[email protected];
After it i try to call open function:
declare
h number;
begin
h := dbms_datapump.open('IMPORT', 'TABLE', 'TEST.LINK', null, '10.2');
end;
and get exception: 39001. 00000 - "invalid argument value"
if i remove 'TEST.LINK' from the arguments it works fine
Edited by: 990594 on 26.02.2013 23:41

Hi Richard Harrison,
result for import from 11g to 10g:
impdp user/pass@dburl schemas=SCHEMANAME network_link=TEST_LINK version=10.2
Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
ORA-39001: invalid argument value
ORA-39169: Local version of 10.2.0.1.0 cannot work with remote version of 11.2.0.2.0
result for export from 11g to 10g:
expdp user/pass@dburl schemas=SCHEMANAME network_link=TEST_LINK version=10.2
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing option
ORA-39006: internal error
ORA-39065: unexpected master process exception in DISPATCH
ORA-04052: error occurred when looking up remote object SYS.KUPM$MCP@TEST_LINK
ORA-00604: error occurred at recursive SQL level 3
ORA-06544: PL/SQL: internal, error, arguments: [55916], [], [], [], [], [], [], []
ORA-06553: PLS-801: internal error [55916]
ORA-02063: preceding 2 lines from TEST_LINK
ORA_39097: Data Pump job encountered unexpected error -4052

Imp from 11g to 10g db

Hi all,
I am importing an expdat.dmp which is an output of 11g to lower 10g db.
So I am using a 11g client to import it to 10g. But I can not understand why some tables got imported while others were not :(
The error said that the table already exist, when in fact is it not yet there.
Have you encountered this kind of issue?
Or how do I import a dump from 11g to 10g?
Thanks a lot,
Yxz
Edited by: yxes2013 on 17.2.2013 20:02

sb92075 wrote:
yxes2013 wrote:
Hi all,
I am importing an expdat.dmp which is an output of 11g to lower 10g db.
So I am using a 11g client to import it to 10g. But I can not understand why some tables got imported while others were not :(
The error said that the table already exist, when in fact is it not yet there.
Have you encountered this kind of issue?
Or how do I import a dump from 11g to 10g?
Thanks a lot,
Yxz
Edited by: yxes2013 on 17.2.2013 20:02export MUST be taken or done using the LOWER version utility.
http://docs.oracle.com/cd/E11882_01/server.112/e22490/dp_export.htm#SUTIL870
Wouldn't an export from the 11g Data Pump client work with a 10g database, as long as the dumpset was created with VERSION=10.x?
-Justin

[Urgent]How to import odi procedure from 11g to 10g.

Hi All,
I am trying to import odi code(interface/procedure) from 11g to 10g but gettting xml error.
Please reply as soon as possible.
Thanks

Forward compatibility for importing odi artifacts is not supported.

11g to 10g Dataguard

Dear Friend,
We have set up for Physical stand by between two 10g instances.
Now its required to upgrade oracle version , but 1st we want to upgrade Primary DB version to 11g then later on stand by.
So is 11g to 10g DG is possible?, does logical standby support this? if yest then what will be process for same.

So is 11g to 10g DG is possible?nope, it would not make sense. a standby is for failover, how can you failover to an older release?
if you want a reporting system on an old release - ok (I wouldn't agree with you but whatever). You would do that using streams.
Tom @ http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1468639100346407276
Also Check below link where Rajesh has given good PDFs links :
How to upgrade the 10g Dataguard after the primary was upgraded to 11g
Regards
Girish Sharma

Exporting schema from 11g to 10g

how can i export full schema(suppost scott) from 11g to 10g both are on different machines and i dont know much about db side, if any body can suggest some queries.
thanks and regards
Abbas

when i run the expdp it gives me following error
Export: Release 10.1.0.4.2 - Production on Wednesday, 27 April, 2011 11:43
Copyright (c) 2003, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit
Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORA-39002: invalid operation
ORA-39070: Unable to open the log file.
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 536
ORA-29283: invalid file operation
what can be wrong
Regards
Abbas

How to Downgrade Rpd From 11g to 10g???

Hi all,
I want to know how to downgrade rpd from obiee 11.1.1.5 to obiee 10.1.3.4.
please share the valuable links.
Thanks.

First, you will have to completely uninstall 11g, see steps below:
http://obiee911.blogspot.com/2013/01/uninstalling-obiee-11g-instance-on.html
This should be followed by installing 10g, and then applying 10g patches to reach 10.1.3.4.1 version. I hope you have all the right 10g installation files available. Im not sure if you can download them from Oracle anymore, please check before proceeding.

Downgrade oracle version 11g to 10g

Hi
while connecting from 11g client to 8i it throwing error version not supported
how to downgrade oracle 11g client to 10 g client.
Thanks
Regards

Hi Mirza,
thanks for ur reply, but is there any way to downgrade the oracle client from 11g to 10gon server there more database so that we cannot unistall.
I believe you Install 11g client software on client machine, if its so you can safely uninstall it and Install 10g again.
If this 11g Installation configured on server with a database its a different scenario.
You question is not clear. Please elaborate it...
Also i dont think there is no such option for downgrading client.
thanks,
X A H E E R

ORA-600 [17069] error while running catrelod.sql to downgrade 11g database

Hi,
We are downgrading our 11.2.0.2 database to 10.2.0.4. We have successfullly run catdwgrd.sql without any errors in 11g env. While running catrelod.sql in 10g env we are facing the following error:
SQL> @?/rdbms/admin/catrelod.sql
TIMESTAMP
COMP_TIMESTAMP RELOD__BGN 2013-04-24 20:15:39 2456407 72939
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database server version is not 10.0.0.
DOC> Shutdown ABORT and use a different script or a different server.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
DOC>#######################################################################
DOC>#######################################################################
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error if the database has not been opened for MIGRATE.
DOC>
DOC> Perform a "SHUTDOWN ABORT" and
DOC> restart using MIGRATE.
DOC>#######################################################################
DOC>#######################################################################
DOC>#
no rows selected
Session altered.
Session altered.
no rows selected
DECLARE
ERROR at line 1:
ORA-00600: internal error code, arguments: [17069], [0x170FB8CA8], [], [], [],
[], [], []I have checked the trace file in udump but it dint give any readable information.
Please find below environment details.
OS : RHEL 5 64 bit
11g Database : 11.2.0.2
10g Database : 10.2.0.4
Kindly assist.

KR10822864 wrote:
Whenever an ORA-600 error is raised a trace file is generated and an entry written to the alert.log with details of the trace file location. Starting with Oracle Database 11g Release 1, the diagnosability infrastructure was introduced which places the trace and core files into a location controlled by the DIAGNOSTIC_DEST initialization parameter when an incident, such as an ORA-600 is created. For earlier versions, the trace file will be written to either USER_DUMP_DEST (if the error was caught in a user process) or BACKGROUND_DUMP_DEST (if the error was caught in a background process like PMON or SMON). The trace file contains vital information about what led to the error condition
please post 40 lines of alert log info .
MOS Note:ORA-600 [17069] "Failed to pin a library cache object after 50 attempts" [ID 39616.1]
"Look in the trace file for the text 'LIBRARY OBJECT HANDLE: handle=170fb8ca8'"
if not found any massages like above please raise [email protected].
Hi KR,
Thanks for your help. As suggested I have checked the trace file to search and found the below info. I suppose it is some kind of lock but not sure about it. Please let me know if the following makes sense:
    SO: 0x21158a6e0, type: 3, owner: 0x211006f28, flag: INIT/-/-/0x00
    (call) sess: cur 211572570, rec 211572570, usr 211572570; depth: 0
      SO: 0x21158a9b8, type: 3, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (call) sess: cur 211572570, rec 0, usr 211572570; depth: 1
        SO: 0x1727a2618, type: 54, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT PIN: pin=1727a2618 handle=170fb8ca8 mode=S lock=171243e98
        user=211572570 session=211572570 count=1 mask=001d savepoint=0x43 flags=[00]
        SO: 0x171243e98, type: 53, owner: 0x21158a9b8, flag: INIT/-/-/0x00
        LIBRARY OBJECT LOCK: lock=171243e98 handle=170fb8ca8 mode=S
        call pin=0x1727a2618 session pin=(nil) hpc=0000 hlc=0000
        htl=0x171243f18[0x17278a310,0x17278a310] htb=0x17278a310 ssga=0x172789928
        user=211572570 session=211572570 count=1 flags=PNC/[0400] savepoint=0x43
        LIBRARY OBJECT HANDLE: handle=170fb8ca8 mtx=0x170fb8dd8(0) cdp=0
        name=SYS.STANDARD
        hash=51570e225ed8a9a803b7318f191e0a8d timestamp=04-18-2006 00:00:00
        namespace=TABL flags=KGHP/TIM/SML/[02000000]
        kkkk-dddd-llll=0000-001d-001d lock=S pin=S latch#=3 hpc=0004 hlc=0004
        lwt=0x170fb8d50[0x170fb8d50,0x170fb8d50] ltm=0x170fb8d60[0x170fb8d60,0x170fb8d60]
        pwt=0x170fb8d18[0x170fb8d18,0x170fb8d18] ptm=0x170fb8d28[0x170fb8d28,0x170fb8d28]
        ref=0x170fb8d80[0x170fb8d80,0x170fb8d80] lnd=0x170fb8d98[0x170f05b50,0x170fa6858]
          LIBRARY OBJECT: object=170e82de8
          type=PCKG flags=EXS/LOC[0005] pflags=NST/IVR[0201] status=VALD load=0
          DATA BLOCKS:
          data#     heap pointer    status pins change whr
              0 170e831f8 170e82fc0 I/P/A/-/-    0 NONE   00
      SO: 0x21158e470, type: 5, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      (enqueue) CU-70E88BC0-00000001    DID: 0001-001F-00000004
      lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res_flag: 0x2
      res: 0x17677adc8, mode: X, lock_flag: 0x0
      own: 0x211572570, sess: 0x211572570, proc: 0x211006f28, prv: 0x17677add8
      SO: 0x177f82c28, type: 59, owner: 0x21158a6e0, flag: INIT/-/-/0x00
      cursor enqueue
      child: 170e89348, flag: 53, number: 0
      parent: 170e89738

OAM 11g Webgate 10g customized SSO logout page

As stated in the title, I am using OAM 11g and Webgate 10g. I am trying to create a customized SSO logout page but am confused on a few parts. First off, in http://docs.oracle.com/cd/E17904_01/doc.1111/e15478/logout.htm#CHDHFGJC , it states the following step for their logout.html:
Logic in logout.html redirect to the OAM Server. For example:
http://myoamserverhost:port/oam/server/logout?end_url=http://my.site.com/
welcome.htmlMy question is if this is truely required? Or is there a way to have OAM invalidate the session and do its internal part of the logout procedures without needing to force the user to redirect to the OAM server's logout URL (eg: it automatically recognizes that the Webgate URL is "...../logout.html" and handles it properly). From talking to colleagues it sounds like this should be possible, and I see some mentions of it in the above documentation, but this appears to be 11g OAM and 11g Webgate behavior. At the same time though, the line "Logout is initiated when an application causes the invocation of the logout.html file configured for any registered OAM 10g Webgate." Leads me to believe that it can work with 10g webgate as well.
Or, is there a way to have multiple valid logout pages on the OAM server? (There is currently a customized logout page that we cannot modify, and does not meet all the requirements we have for look/feel)
Thank you
Edited by: mBaldwin on Apr 12, 2013 10:30 AM

Bump Any ideas?

Getting error while upgrading rpd to 11g from 10g

Hello,
I have a rpd using obiee 10g.I want to open the same in obiee 11g,but getting error like need to run one file.
obieerpdmigrateutil.exe.
So i just run with -i,-u and -o option, that now i am getting this error->
The file 'DBFeatures.INI' is required for RPD migration and could not be located. Please ensure that ORACLE_INSTANCE is pointing to a valid instance directory.
Thanks

Hi akshara,
Firstly you need to upgrade from 10g to 11g,you need to run a .bat file from the path and follow some steps like collecting the artifact files like NQSconfig.ini,instanceconfig.xml,DBfeatures.ini with RPD and catalog to upgrade to 11g.
Here is the step by step process to upgrade and some artifact files manually given in step 2 of this blog http://prolynxuk.com/blog/?p=424
http://www.biconsultinggroup.com/images/VideoAlbum/OBIEE11gUpgrade11-4-10.pdf
(OR) standard documentation Start here http://download.oracle.com/docs/cd/E1457101/bi.htm_
If still the problem exists you manually update the DBfeature.ini file going to the specific location in 10g and copy them to 11g path.
hope helps you.
Cheers,
KK

Database link from 11g to 10g

I am trying to create a database link from the 11g database to the 10g database using:
create database link ORCL10R2 connect to <username10g> identified by <password10g> using <db10g>;
It Returns
Database link created.
select sysdate from dual@ORCL10R2 returns error:
ERROR at line 1:
ORA-12504: TNS:listener was not given the SERVICE_NAME in CONNECT_DATA
Please let me know what changes I need to make to tnsnames and listener at both servers.

11g database: 10.1.1.10
10g database: 10.1.1.12
TNSNAMES.ORA at 10.1.1.10
XYZ =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.1.10)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XYZ)
LISTENER.ORA at 10.1.1.10
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.1.1.10)(PORT = 1521))
what needs to be modified here?
Edited by: 944558 on 5 Jul, 2012 12:27 AM

Downgrade 11g to 10g

Similar Messages

Maybe you are looking for