Downgrade 4402 for adding LAP1522

We want to add 1522 LAP to our mesh network, we used WLC4402 with software released 4.2.207 and LAP1510 mesh network.
For compatibility both of LAP type we should downgrade WLC to 4.1.192.22M or 4.1.192.35M (Which Software released correct for this plan?)
1- Can we downgrade the current software released to 4.1.192.X directly?
2- What is the procedure?
3- After downgrade, the WLC reset to factory default? how we can backup and restore configuration to new software released?

Hi,
Software downgrade is not recommended by us (CISCO or CISCO TAC).. sometimes configs will be lost and sometimes the WLC crashes.. You could backup the config before downgrade and then if the WLC doesnt crash then you can load the config back on it..
Hope this answers your question..
Regards
Surendra
====
please dont forget to rate the post which answered your auestion or was usefull

Similar Messages

Customize AP Trial Balance XML Data Definition for adding Aging Buckets

Hi
I have to customize AP Trial Balance Report XML Data Definition Template for adding Aging Buckets & Supplier details in R12 , Could you let me know how i can modify XML file?
Thanks
Pravin

Hi,
My requirement is different from the one which is in below link.
I need to add Aging Buckets & Supplier details to AP Trial Balance report (R12) , here i need to modify the XML Data definition template.
Please help me, very urgent.
Thanks
Pravin

BEx Macros for adding a column in workbook

Hi All,
I want to write a VB code for adding a next column to my workbook. I am working in BI 7.0.
I dont know VB so , plz provide me the code for the same.
Can someone guide me or provide the codes for these following functions also:
&#56256;&#56452; create adhoc report formats with BEx Reports
&#56256;&#56452; retain the format defined on the Bex reports
&#56256;&#56452; enhance the report layout with shadow boxes
&#56256;&#56452; add or remove rows and columns
&#56256;&#56452; hide navigation and filters
&#56256;&#56452; hide rows and columns
&#56256;&#56452; add calculations
&#56256;&#56452; adjust the print settings dynamically
&#56256;&#56452; change report title
&#56256;&#56452; add comments to the report
&#56256;&#56452; change width, height, color, font etc properties of the cell
Answers will be awarded with points.
Regards..
Vinod.

were you able to achieve this? i have the same requirement...please help if possible

Process for adding a boolean option to the web service API

Hey guys,
Here's a little background:
I'm currently working on adding an optional "strict" mode to some of the unmarshalling functions in SchemaMarshaller that will throw exceptions when receiving bad data for certain fields, and also improving the date handling while I'm at it (I want null instead of mangled dates when receiving bad data when strict mode is off).
This is for my benefit at the moment as I'm tired of spending time debugging Flex code when XFire and Oracle are spitting out rubbish (like empty xsd:DateTime nodes, DateTimes in xsd:Date nodes, etc) - but I'm sure other people would like to use it too while we don't have a response validator, so I'd like to do it in a way that I can submit as a feature request (with patch) on Jira.
My questions are about the procedure for stuff like this- where should this option be made public in the API, and who would I talk to about it? Or would it be best for it to always be strict? - That's how I'd like it :) Perhaps it should just log errors when it encounters bad data?
This is the first thing I'd like to "add" to the SDK rather than a simple bug-fix, so I just want to do things in a kosher manner. Sorry if I come across like a total noob :)
Cheers,
-Josh
"Therefore, send not to know For whom the bell tolls. It tolls for thee."
:: Josh 'G-Funk' McDonald
:: 0437 221 380 ::
[email protected]

Hey Josh, I'm swamped at the moment but appreciate your interest and your contributions to Flex and WebServices thus far. I'll try and get some time to look into your specific request and what you're hoping to do at the code level, but to answer your question about test cases, you should consider the NIST testsuite for XML Schema datatypes. BlazeDS has historically maintained the WebService implementation, so it appears their test case for NIST based schema tests starts out here (and refers to many data type test cases in the /nist subdirectory). http://opensource.adobe.com/svn/opensource/blazeds/branches/3.0.x/qa/app s/qa-regress/testsuites/flexunit/src/tests/flexunit/xml/NISTXMLSchemaTes t.as Pete ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Josh McDonald Sent: Tuesday, July 08, 2008 8:21 PM To: [email protected] Subject: Re: Process for adding a boolean option to the web service API A new message was posted by Josh McDonald in Developers -- Process for adding a boolean option to the web service API Yeah I knew it'd have to be somewhere outside of SchemaMarshaller, as it's [ExcludeClass] anyway so end users don't see it, nor is it documented in the api docs. Just wasn't sure where it should be. I'll have a think about it some more when I get some down time to work on it, but webservice was where I was thinking it should be too. Didn't think about having it settable on operation as well though, so thanks for that :) Anybody know a good source of valid values for various XSI types (date and DateTime mainly) for testing purposes? Or even who I should contact to get access to that sort of thing? I assume the W3C will take 6 months to answer me, and the answer will be "buy our $10,000 compliance testing suite" or something along those lines. -Josh On Wed, Jul 9, 2008 at 9:46 AM, Matt Chotin <[email protected]> wrote: A new message was posted by Matt Chotin in Developers -- Process for adding a boolean option to the web service API I think for a top-level user option I would put the new option on the mx.rpc.soap.Operation class (I think that's the name). You'd then have that propagate through to the underlying schema classes as they are used. I'd then also add an option to the WebService class itself, and basically in the Operation it should see if it has its own value set and if not check the value on the WebService. We do this for a couple of other flags too I think. End users in general wouldn't look at any classes other than the WebService and maybe the Operation classes, so asking them to set options on the schema classes themselves probably wouldn't work. Matt -- "Therefore, send not to know For whom the bell tolls. It tolls for thee." :: Josh 'G-Funk' McDonald :: 0437 221 380 :: [email protected] ________________________________ View/reply at Process for adding a boolean option to the web service API <a href=http://www.adobeforums.com/webx?13@@.59b5be89/1> Replies by email are OK. Use the unsubscribe <a href=http://www.adobeforums.com/webx?280@@.59b5be89!folder=.3c060fa3> form to cancel your email subscription.

Script for adding a login item for all accounts in the system

Hi,
Thanks for reading this query. I am new to the mac environment. I have developed a java application and created an installer of this application for MAC system.I want to run this application on starting the system. So I have written an apple script for adding this application in login items and this script will run immediately after completing installation process. And the entire process is fine. But the problem is, the application is added to login items of only the user who installed the application. But I want to get available the application in the login list of all accounts created in the system. How can I achieve this? Once more thanks in advance. I am attaching my script below:
+*tell application "System Events"*+
+* make login item at end with properties {path:"/Applications/MyApplication.app", hidden:true}*+
+*end tell*+

Hi,
Try to use tables RSOSFIELDMAP, RSDSSEGFD and RSTRAN
Hope it helps
bhaskar

Creation of rule file for adding aliases to Members

Please help me in creation of rule file for adding of aliases to the members. I have created a new alias table along with default alias table.
These are the members and alias names for the newly created alias table.
0000002452     TA
0000002459     HJ
0000002460     HK
0000002462     HM
0000004012     CB
0000004015     EA
0000004025     BA
0000004070     DA
0000004087     GC
0000004088     FD
0000006231     CM
0000009103     WP
0000009106     WV
0000009126     WW
0000008458     NH
0000008475     NY
0000008481     NF
0000008483     NG
The below are the members and aliases for the default alias table.
0000001209     P&S Storage Facilities
0000001210     1210 US Procurement & Supply
0000002452     Warren Truck Assembly
0000002459     Toledo I Assembly
0000002460     Toledo II Assembly
0000002462     Toledo III Assembly
0000004001     US Manufacturing Group Office
0000004012     Jefferson North Assembly
0000004015     Belvidere Assembly
0000004025     Sterling Heights Assembly
0000004070     Newark Assembly
0000004087     St Louis North Assembly II
0000004088     St Louis South Assembly II
0000004199     Pilot Operations
0000004501     Opm
0000005111     Kokomo Casting
0000005203     Trenton Engine
0000005205     Kenosha Engine
0000005209     New Mack Avenue Engine
0000005304     Detroit Axle
0000005305     Kokomo Complex
0000005308     Indiana Transmission
0000005403     New Castle Machining & Forge
0000005404     McGraw Glass
0000005406     Toledo Machining
0000006203     Warren Stamping
0000006204     Twinsburg Stamping
0000006215     Sterling Heights Stamping
0000006231     Conner Avenue Assembly
0000002100     2100 Sales & Marketing
0000005221     GEMA - Plant1 Ops
0000009006     9006 Canadian Customs
0000009008     Canadian Manufacturing Group Office
0000009103     Windsor Assembly
0000009104     Etobicoke Casting
0000009106     Pillette Road Assembly
0000009126     Bramalea Assembly
0000008458     Atos
0000008475     Saltillo Truck Plant
0000008481     Toluca Assembly Plant
0000008483     Lago Alberto Truck Plant
Now I have to create rule files to update these aliases.
Please elaborate, so that it will be clear for me. As I am new, please make it up with steps.

You dont need to create a rule file. You can create a alias table like this in a notapad
$ALT_NAME 'First'
0000002452 TA
0000002459 HJ
0000002460 HK
0000002462 HM
0000004012 CB
0000004015 EA
0000004025 BA
0000004070 DA
0000004087 GC
0000004088 FD
0000006231 CM
0000009103 WP
0000009106 WV
0000009126 WW
0000008458 NH
0000008475 NY
0000008481 NF
0000008483 NG
$END
and Save it as First.alt and You can import like this
1)Open the outline in edit mode.
2)Select Outline > Import alias table.
3)In the Open dialog box, select the alias table import file.
4)Click OK.
go to outline properties and the new alias table must be made Set as active to view the alias names.
you can create and import up to 10 alias tables

Transaction code for adding new character

hi ,
i am new member of this group.I want to know the transaction code for adding a new character in BW.
please help me.
Thanks in advance,
reena

Hi reena,
When you say "adding a new character in BW" you want to create a new characteristic (InfoObject) in BW or you want to add a new char to BW?
Modeling in BW is done at tocde RSA1 & go to relevant tab on left screen (dataprovide, InfoObjects etc) & right click to create Objects.
hope it helps
regards
VC

Where is INCLUDE KOMKZ for adding field to Free Goods Determination ?

http://help.sap.com/saphelp_46c/helpdata/en/0e/9e466f0e18d311ae620060b03c9bbe/content.htm
This page is the info in SPRO for adding a field for Free Goods Determination.
New fields for free goods determination are added in the following INCLUDES:
Header data in KOMKZ (INCLUDE in KOMK, KOMG)
Item data in KOMPZ (INCLUDE in KOMP, KOMG)
I checked and the struture KOMKZ doesnt exist, only a data element exists. So... I was wondering if it´s a error in SAP Documentation.
When u add the field in that include it will be in KOMK, I allready added a field for Pricing determination...in INCLUDE KOMKAZ, so I add also the field for Free Good in that structure...but it doesnt work, I know that in the end is just a field in KOMK, but perhaps there is some kind of validation... because Pricing determination works, but Free Goods doesn´t and I think that is because the field is in the wrong Include Structure.
Some1 could give me a hand with this ?
Thx

Hi Rodrigo..
As mentioned the include is KOMKAZ and not KOMKZ.. Just wanted to check if code has been written in the user exits to populate that fields..
Ex:
FORM USEREXIT_PRICING_PREPARE_TKOMK in include MV45AFZZ .
It worked for me.
Best Regards,
Pradeep.

I've had this iPad computer thing for a few months now. I used to just put in my password when I downloaded an app or such like. Now it wants me to set up 4 further questions and answers "for added security". How can I return to the old system?

I've had this iPad thing for a few months. It used to just ask me for my password, but now it is demanding I set up four questions and answers for
"added security". I don't want to do that, I just want to carry on as I was but the machine is preventing any app downloads etc.
Seems the stupid machine is in control.
How do I get it to listen when I threaten it with a good thrashing and a one way trip to the garbage unless it does what I say?
Thanks

Chick3597 wrote:
Regardless of apple updating something or another. I have no need for the additional questions and really don't want to allow them to bully me into compliance.
You may have no need for additional but Apple does. They don't want your iTunes account to be hacked and then go complaining to them that their security procedures are not up to standards.
Chick3597 wrote:
So how can I continue in the good old fashioned way?
Its really absurd to even ask this in light of the information that you have been given already. The "old fashioned" way is gone. It's Apple's store, Apples's rules and IMO - its a wise decision on Apple's part.
You do not have to comply at all, but you will not be able to purchase from iTunes anymore, but nobody is going to force you to do something that you do not want to do.

Best / most popular software or scripts for adding search function to website?

I'm trying to find a good piece of software or script for implementing a site search function into our website. I am relatively knowledgeable in Dreamweaver and can write CSS and XHTML at the fairly intermediate to advanced level, as well as work with JavaScript and js files, but I don't really know much ASP or "by hand" Java coding. Their are so many scripts and software out there for adding a site search that it's hard to sort through and narrow down. I was hoping to find reviews of the popular ones or "top 10 lists" of some sort that would help me pinpoint a good one, but can't find anything like that. These are the primary needs of the website:
--Has under 50 searchable pages that won't change much and probably won't exceed 50. There are product part numbers and descriptions for some 250-300 part numbers, spread across only 24 of those pages. The remaining pages are important but no part numbers-- About Us, News, Where to Buy, History, Featured Products, etc. The product pages are very much like an online store but we don't sell directly on the site (only thru distributors/reps).
--We are trying to keep the price under about $50, or use a free solution
--The pages are all static XHTML+CSS pages, but our server can run ASP (we have another website for one of our other product line divisions, on the same server, with many more products beyond 1000, which was programmed completely in ASP by an outside company about 4 years ago). We self-host both sites.
--Our server can't run PHP
--The search capabilities need only be rather basic-- a keyword search with a results page that uses the same design template as the rest of the site. It would be nice, but not mandatory, to have a search filter and/or a drop down menu to enable selectively searching only certain parts of the site, or only product/part number search vs. general search, etc. (but again, not mandatory).
--I do have a sitemap page already on it, if that matters or helps
Some of the ones I've found so far that looked the most promising include: Zoom Search Engine (http://www.wrensoft.com/zoom/), Site Search Pro (http://www.site-search-pro.com/), and FX Site Search which is a DW Extension I found in the exchange (http://www.felixone.it/extensions/prod/mxssen.asp)-- (that one looks possibly technically challenging or requiring more ASP skill, though)
Forgive me if there is a better area to post this, if so let me know.

For a static site, your options are:
Google ~ http://www.google.com/sitesearch/
Freefind ~ http://www.freefind.com/
Zoom from Wrensoft ~ http://www.wrensoft.com/zoom/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/

User exit/ BADI in f-32 / f-28 for adding application tool bar button

Hi Experts,
There is a requirement, for adding application tool bar button in the Transaction codes F-32 / F-28 / Feba_lockbox. So that while clearing documents with reference document, they can upload the data(Reference Documents) from local file and after the data is fetched for clearing, they need to download the data to local file for verification. If the data is verified to be okay, then they can go ahead with simulation and posting. They need this verification to be done in excel sheet, so need to download the data into local file.
I found a BADI in that screen is BADI_LAYER but I don't think it is relevant.
Any help is apreciated!
Is there any EXIT ? Because I can not find it too.
Regards,
Nitin

where you did the enhancement?
I have to create the IDOC once Clear docuemnt is created.. It may help me.

Script for adding datafile to tablespace

Hi
Does anyone have a template alter tablespace add datafile script handy?
Basically, we need to, in the event of a tablespace alert, do two things:
query that tablespace to see how much space is remaining.
ascertain the size of the datafiles added to that tablespace already (to clarify what size we should make the additional datafile)
finally, the command itself for adding the extra datafile.
Thanks.
10.0.2.0

SELECT Total.tablespace_name "TSPACE_NAME",
round(nvl(TOTAL_SPACE,0),2) Tot_space,
round(nvl(USED_Space,0),2) Used_space,
round(nvl(TOTAL_SPACE - USED_Space,0),2) Free_space,
round(nvl(round(nvl((TOTAL_SPACE - USED_Space)*100,0),2)/(Total_space),0),2) "USED%"
FROM
(select tablespace_name, sum(bytes/1024/1024) TOTAL_SPACE
from sys.dba_data_files
group by tablespace_name
) Total,
(select tablespace_name, sum(bytes/1024/1024) USED_Space
from sys.dba_segments
group by tablespace_name
) USED
WHERE Total.Tablespace_name(+) = USED.tablespace_name and
round(nvl(round(nvl((TOTAL_SPACE - USED_Space)*100,0),2)/(Total_space),0),2)< 20;
the above query will display tablespaces which are having freespace below 20%
select file_name,autoextensible,sum(bytes)/1024/1024,sum(maxbytes)/1024/1024
from dba_data_files
where tablespace_name='TBS_NAME'
group by file_name,autoextensible;
the above query will give details of datafiles like autoextensible or not etc.
SELECT SUBSTR (df.NAME, 1, 40) file_name,dfs.tablespace_name, df.bytes / 1024 / 1024 allocated_mb,
((df.bytes / 1024 / 1024) - NVL (SUM (dfs.bytes) / 1024 / 1024, 0))
used_mb,
NVL (SUM (dfs.bytes) / 1024 / 1024, 0) free_space_mb
FROM v$datafile df, dba_free_space dfs
WHERE df.file# = dfs.file_id(+)
GROUP BY dfs.file_id, df.NAME, df.file#, df.bytes,dfs.tablespace_name
ORDER BY file_name;
the above query will show how much freespace is left in each datafile.

How to create a single action for adding a border and signature for portrait AND landscape images???

i would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
need i say more?!
i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
i hope i've been clear and that someone can help me here. I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
Thanks in advance photoshoppers ...

It is actually quite easy to do if you have a good understanding of how Photoshop works. To be able to handle any size Landscape and Portrait you need to scale the document to a known width or height. Once the document is resized to the width or height it easy. When yot resize the document you use Image size with resample NOT checked. Not a single image pixels is changed all the happens is the documents DPI is set to the proper DPI resolution to print that size. This lets you add a border sized for and document. You can use Canvas Size check relative and leatve the anchor point centered and set width and height to 2" this will add 1"on all sides. Use Canvas size a second time move the anchor point to the top center check relative and set height 1" the will add an additional 1" border on the bottom. You then record a text layer with your Name title or what ever to the top left of the image. Select all ant the align the text layer to the selection to move it to the bottom right.
Adding a couple of scripts to the action you can make sure there is a background layer so the added canvas will be filled with pixels. You can restore the document to its original DPI resolution to retain the images print size. Down load my crafting actions package it contains a dozen scripts to be used within actions. There are text file with tips and guidelines additionaly there is one on dealing with document size and includes a sample action set with a watermarking action the can watermark and size image. The Action set is also saved as a text file with additional comments I added my downloads can be found here http://mouseprints.net/Photoshop.html

Reader rights for adding attachment

Hi ,
is it possible to apply reader rights for adding attachments when output pdf form in sap?
where can i find more document on controlling reader rights?
thanks and best regards.
Jun

Hi Jun,
here is a sample code for seting usage rights:
FORM use_rights
CHANGING p_pdf TYPE xstring.
DATA: l_fp           TYPE REF TO if_fp,
      l_pdfobj       TYPE REF TO if_fp_pdf_object,
      l_dest TYPE rfcdest.
MOVE cl_fp=>get_ads_connection( ) TO l_dest.
l_fp = cl_fp=>get_reference( ).
l_pdfobj = l_fp->create_pdf_object( connection = l_dest ).
l_pdfobj->set_document( pdfdata = l_pdf ).
DATA: lt_rights TYPE TFPURIGHT.
PERFORM my_usagerights CHANGING lt_rights.
l_pdfobj->set_usagerights( default_rights = space rights = lt_rights ).
l_pdfobj->execute( ).
l_pdfobj->get_document( IMPORTING pdfdata = l_pdf ).
ENDFORM.
FORM my_usagerights
    CHANGING pt_rights TYPE TFPURIGHT.
DATA: ls_rights LIKE LINE OF pt_rights.
REFRESH pt_rights.
ls_rights-right = if_fp_pdf_usage_rights=>formrights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_fillin. "Ukladani
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_export. "Export XML
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_add.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_delete.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_submitstandalone.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_spawntemplate.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>formright_online.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-right = if_fp_pdf_usage_rights=>signrights.
ls_rights-value = if_fp_pdf_usage_rights=>signright_modify.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-right = if_fp_pdf_usage_rights=>annotrights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_create.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_delete.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_modify.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_copy.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_import.
INSERT ls_rights INTO TABLE pt_rights.
ls_rights-value = if_fp_pdf_usage_rights=>annotright_export.
INSERT ls_rights INTO TABLE pt_rights.
ENDFORM.
Michal

What is the rule for adding application elements to faces-config.xml

I have posed this question before, but was unable to get an answer so here goes again.
What is the rule for adding more than one application element to the faces-config.xml?
The schema documents that 1-n are possible, but why and when should I do this?
--W

sorry if you don't login in tomcat administration before. you must enter login and password of a manager user on tomcat .
The user is the one you give when installing tomcat.
If you have forgotten it : see it to: C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\tomcat_users.xml
and choose one whop have role='manager'

Downgrade 4402 for adding LAP1522

Similar Messages

Maybe you are looking for