Download issues with Android DPS App

Hi All,
Just wondering if any of you are trying to download a folio from the android dps app and cannot change navigation pages. The folio is downloading but it looks like it freezes until the folio is completed downloading.
In iOS, you can download a folio and click on other navigation page.
Is this a fix for adobe or am i doing something wrong?
Thanks

You must be using the legacy Android app which does not support progressive download. You should try using our new native Android application, which does.
Here's Bob's help topic on building native Android apps: https://helpx.adobe.com/digital-publishing-suite/help/building-android-apps.html
Here's a list of what's supported in the different apps. Note that not all overlays are supported yet in the native Android viewer (audio is still being developed): Digital Publishing Suite Help | DPS supported feature list
Neil

Similar Messages

Open a Android DPS app from a Safari link

Hello:
Is it possible to open an Android DPS app from a Safari webpage using a hyperlink (href) ? In iOS I've found a solution but I'm not sure how to implement it on Android
Saludos,

If it can be done with native code (iOS and android) then you could also write a native extension to launch an app. However, because mobile apps are installed in individual sandboxes apps probably have no way of telling the parent OS to list current apps or run a paticular app. This is just my opionion from what I have understood so far. I think you can create some sort of native extension and use the following methods below.
Have a look here:
http://developer.android.com/reference/android/content/Intent.html
As for iOS you would need to use App urls which would be application specific.
http://iphonedevelopertips.com/cocoa/launching-your-own-application-via-a-custom-url-schem e.html

Issue with Android devices - cannot connect to Fac...

Good morning.
I have an issue with android phones and a tablet not being able to connect to Facebook etc on our home wifi. Everything works on other wifi and the signal strength is good.
Did get it to work for an hour after a pin reset, but that did not last.
An hour on the phone to BT help yesterday, set the channel to 2.4ghz but that made no difference and no more ideas from BT it seems.
Was told by the BT man not to do a pin reset as it wears out the router, apparently.
Any help greatly appreciated.
Thanks.
Solved!
Go to Solution.

do you have parental controls active? if so turn off
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Known issues with Citrix Xen App 6.5

Are there any known issues with Citrix Xen App 6.5 and Adobe Reader 10.1.1?

As per the administration guide, http://kb2.adobe.com/cps/837/cpsid_83709/attachments/Acrobat_Enterprise_Administration.pdf
Citrix XenApp 5.0 and 6.0 are supported on 10.x products. As per my deployment tests, they work as expected.
But am not sure of XenApp 6.5 with 10.0 products, though it should work but I have not tried them.
In order to avoid any issue, we should stick with the correct prerequisites.

Hi have the ipod touch and having issue with the reminders app. do not have the reminders page just the completed page

hi have the ipod touch and having issue with the reminders app. do not have the reminders page just the completed page

The problem has been fixed with the most recent OS X software update.

How do I fix the buffering issues with the radio app?,

How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?

msbroome wrote:
How do I fix the buffering issues with the radio app? When I try to listen to the Hay House Radio station it buffers quite a lot for no apparent reason sometimes. I have not been able to find any settings to adjust this. Does anyone know what I might be able to do to modify this problem?
What is your Internet data rate?

Folio download problem with Android app

I still have a problem with the app. It's ok with the certificate now and ok on google play store.
The app was updated on two android tablets and when I try to download an issue which was uploaded a few months ago with v30 DPS tools, the app can't download it because I need to upgrade the app.
The first one was build with v25 tools, is this something with the certificate.
Yves

What version number shows in the about dialog of your application? You can get to the about dialog from the "..." or hardware menu button on your device while in the library view. Select "About".
Also, can you send me a private message with the adobe ID that you're using to publish your folios?
Neil

TS3899 Has anyone else had issues with the mail app after downloading the 6.1.2 update on their iphone 5?

After downloading the 6.1.2 update on my iphone 5, the mail app won't even open, nor will the mail settings in the settings section. Has any one else had this problem, if so is there a way to fix it?

I've updated two iPhone 3GS to iOS6.1.2. Both no longer work with Hotmail. Tried deleting account followed by a reset. Both still stuck trying to verify account for about 5mins before failing to verify account information. Giving up at this point as I cannot bill Apple for the hours spent so far trying to fix this. Lately I'm spending more and more time resolving issues with Apple software iOS and OSX ML. Apple's reputation is falling rapidly. Such a pity.
Moved to Safari trying to log in over a web browser. That failed as well. Cleared the cache and cookies followed by a reset. Enabled accept cookies to Always and then was able to log in to hotmail and see emails through Safari.
I realise that 3GS is relatively older technology but iOS 6 has not been good to this platform. Everything runs slower than before and there are bugs I'm seeing that are not in the public domain. It's not a hardware fault as my wife's phone is behaving the same way. She's not too pleased either IMHO.
These issues are not happening on Ipad after applying the same update.

I am having a serious issue with all my apps disappearing/not working- user profiles

i will list the things i have done in the past 24 hours, hopefully one of you knows what happened...thank you in advance
first off, my situation- was that i bought a macbook pro(about a year ago) with lion or snow leopord it is software 10.7.5 i dont know what the guy did but when he sent me the computer the username was off and so was the home folder, i changed the username with ease but the home folder stayed tbd and i couldnt figure out how to change it. well it finally got on my nerves enough from looking at it that i wanted to change it today that put me into the situation i am in. Here is what i have changed:
-I added a second profile as to see if i could change the home emblem file named tbd to what i wanted. This worked or so i thought.
- then shared and permissions showed tbd(me) so i wanted to change that also so i went into systempreferences>users and groups>login options>network account server and clicked join/open directory utility. this is where i believe i went wrong i read in a forum that this is what you needed to change to make it look how i wanted it to. under active directory it still had this guys name gtmb04_evan so i changed it to my name like the forum said, well his name is back up even though i changed it. and this is when everything stopped working.
symptoms: all my applications act like they are newly downloaded and make me set them up.
- my home screen is nothing like it was before, no apps are on the desktop and the bar along the bottom only has the basic ones
- i tried to take the second username off of administrater which made me restart my cp(all my stuff looked normal until this, but didnt work)
-my launchpad wasnt showing any apps they simply looked blank
- my firefox along with many other apps wouldnt even start prior to reseting and gave me a message with something like couldnt find or access user profile( i forget the entire message)
please please help me, i hate this right now and have no idea what to do, all my files are still under my name, that when i thought i changed tbd- it apparently just made a new folder under users which didnt show up until the restart, i do not have a time machine set up on this computer because i hated the lion setup and couldn't get it to operate correctly

i had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0E
SMC Version (system):
1.62f7
Hardware UUID:
A802DE22-1E57-5509-93C5-27CEF01377B7
Sudden Motion Sensor:
State:
Enabled
i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it. i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
if you need screenshots or data of anything else as away
[problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain

GUI Download Issue with Chinese characters

Hello,
Currently we are upgrading from 4.7 to ECC. I'm using GUI_DOWNLOAD
function module to download the data from SAP to desktop. I do have an
issue with Chinese characters while downloading the file from SAP to ECC.
In 4.7 the Chinese characters are being downloaded (I haven't used any
code page) perfectly, but where as in ECC the downloaded file has junk
characters instead of Chinese.
Is there any change in the GUI_UPLOAD FM.
For your reference below is the code present in the program
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
    EXPORTING
      FILENAME             = Z_FILENAME
*****DCDK900543 - Begin of fixing for Unicode conversion ****
     FILETYPE             = 'WK1'
      FILETYPE             = 'ASC'
      WRITE_FIELD_SEPARATOR = ABAP_TRUE
*****DCDK900543 - End of fixing for Unicode conversion ****
    CHANGING
      DATA_TAB             = I_TAB_TMP
    EXCEPTIONS
      FILE_WRITE_ERROR     = 1
      NO_BATCH             = 2
      INVALID_TYPE         = 3
      UNKNOWN_ERROR        = 4
      OTHERS               = 5.
Regards,
Bharath.

Hi bharat,
please check whether you ecc 6.0 is uni coded or not (as you upgraded).
If it is not uni coded then you will not be able to print the Chinese characters.
You can see whether it is uni coded or not by the following
in your app toolbar under system click on status.
There you can see whether your ecc6.0 is uni coded or not.
Regards,
koolspy.

How do I create a kiosk experience with my DPS app?

I am trying to have a built in timer to then activate the navto and reset features to go to the cover page of my app. Is it possible within DPS or can I add an HTML widget?

You'd have to do that in HTML, there's no way to do it with native DPS overlays. Note too that this will not make a reliable kiosk experience, and you are likely to run into other issues where your readers are able to get out of your content. DPS really isn't suited to building a kiosk app.
Neil

Is anyone having issues with Android version 4.3 for Galaxy III throwing in zeroes into text messages?

I received a message on Christmas Eve that a free update was available for my Samsung Galaxy III. I accepted the download and discovered some enhancements and fixes that I liked (finally, my voicemail icon displays the number of waiting voicemails that I have!) but I've noticed to glaring issues:
1. When I send text messages that include numbers (a phone number for example) the OS throws in random zeroes into the number. I have to usually touch the ENTER key and type the number on a new line and play around with it until the number stays in the message correctly.
2. I've had occasional lockups using the media hub which, when I do a restart, causes my settings to revert to the default factory settings....kind of a pain.
There may be other issues.
Q. Has anyone out there experienced this same thing?
Q. Is Google going to fix these issues? I noticed that on Christmas day a half dozen or so updates were made, but these to things still are a problem.
Q. Also, the Verizon Wireless Software Upgrade Assistant on my laptop insists that my version is not supported. I can still access photos and music, but it's a little annoying...

I'm sorry you're having issues with your phone after your update BigLouie1124. I recommend enabling safe mode to see if any of your apps are causing issues with your new software. If so, you can remove them. Here are the steps http://vz.to/1cD0kqT . If you continue to have issues the last step would be a factory reset to clear up some of your issues http://vz.to/JCsr33 . Please keep us posted and continue to clear unwanted message threads and clear your browser history periodically.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Issues with updating Apple apps with app store

I have begun to have issues with (all?) Apple apps and App store. including not updating after download, and repeat downloading. Two examples:
I had Pages 5.0.1. 3 days ago I used the app store to download Pages 5.1. This downloaded OK (watched the volume of data on Net Monitor). Although my Pages works OK it remains on 5.0.1, although the App Store shows that 5.1 has been “installed in the last 30 days”, and does not offer any further update. Same scenario for Numbers 3.0.1 and 3.1.
on the other hand
Keynote, iMovie and iPhoto won’t even open at all now, if I try to open them I am directed immediately to Apple sign-in in the App Store. Keynote and iMovie show updates available, but not iPhoto. I signed in when I tried just now opening iPhoto, and it immediately starting downloading the software again. I think my iPhoto was 9.5.1, downloaded in December and working fine since then.
I have access only to limited slow expensive broadband. This is taking my whole monthly allowance.
Is there some updating controlling software or file on the HD that could be corrupted?
Any ideas?
Thanks

Have been to Library, and looked in Receipts/InstallHistory.plist
This plist confirms that on 27 Jan App Store downloaded Pages version 5.0.1 again (actually for the third time it appears), although it was supposed to be downloading version 5.1. My App Store/Updates page says version 5.1 was installed (which it isn’t). Same issue for Numbers.
The plist also confirms that the App Store forced me to download the same version of iPhoto in December and Today.
Keynote and iMovie (not one of the iWork) won't open until I download again, but do not have the internet capacity to redownload these large files again and again.
So far iTunes, Aperture and iBook do not seem to be affected. By the way have done simple things like restart, repair permissions etc...
Are there some files/applications that control the downloading of new versions that might be malfunctioning?

Download issues with LR

Hi
PLEASE READ my initial queries with this problem. It seems as though the techs are not taking care in the answers by reading my previous correspondence.
1. I am a subscriber to creative cloud.
2. I have downloaded Creative cloud and have the app list. I have NO problem with this - it is on my desktop and working.
3. From the Creative cloud app list I have downloaded photoshop with NO problems as well.
4. When downloading LR5 from the same Creative Cloud app list it fails after 42% - this is the problem (cannot complete download from Creative Cloud apps list )
5. I have tried using Explorer and Firefox with same results (many times)
6. My first response from support I was told to go to prodesign page and download from the trial link.
7. The link from prodesign page does not work, and anyway i do not want a trial as I do not have a 'serial number' because I am a cloud subscriber and as far as is know no-one has given me a serial number for LR or the other programs I have downloaded through the app list.
8. If there is a serial number for LR please let me have it and I will try and download from an Adobe page.
9. Also there is a reference to 7 steps to follow when downloading. I cannot find where these 7 steps are and if I have managed to get as far as downloading the CC apps and photoshop why should downloading LR be any different?
10. The comment that my pc does not allow cookies - why would the other Adobe programs have no problem in downloading then?
KGE

If there is pertinent information in your previous replies on the same subject then including links to those replies would be helpful for those of us who use e-mail to read and respond to the forums. We cannot see that you have other threads on the same subject without going to the web version of the forums. I am another Lightroom user like yourself, not someone from Adobe.
Your replies to previous messages, which I did go to the forums to look for, indicate the ProDesignTools webpages either are not visible to you or do not make sense to you.
There are seven steps, numbered 0 to 6, on the ProDesignTools webpage within the Very Important Instructions section also previously referred to. Aside from perhaps some brief periods of server maintenance, which I have never personally experienced, the ProDesignTools webpages are available and do work, so if you cannot even get those pages to come up, it suggests you have issues with connectivity to things on the internet, perhaps due to an iffy connection, or perhaps due to a virus or malware scanner that isn't playing nice. Why only LR is affected, is unclear.
Can you confirm if you can see the ProDesignTools pages, and if so, do you see the Very Important Instructions and steps 0 to 6, which involve setting an Adobe authorization cookie, so if you are following steps 0 to 6 and get an error from the Adobe download page that ProDesignTools eventually redirects to, then you might have cookies disabled. Of course if you can't even see the ProDesignTools pages, then you're getting stopped before anything to do with cookies is occurring. Being more specific and detailed about what you're doing and what errors or unexpected conditions happen would help the rest of us not be confused as to what your situation is and not give confusing answers.
However, you are correct that the ProDesignTools trial is the serial-number version, which is different than the Cloud version, or at least that is my experience. A reason to try the serial-number version would be to see if LR installs for you, in case the 42% that the Cloud installer is stopping at is really a preliminary install step rather than a download step and maybe the serial-number version is easier to see error messages from. Some times screenshots of your error situation can be helpful.
Another place to get the LR serial-number version, would be the Adobe updates page: http://www.adobe.com/downloads/updateswhich would also be the most up-to-date version, LR 5.4, rather than LR 5.0 that the trial might still be.
If the serial number version of LR installs from either of the above locations, then before trying the Cloud version of LR, again, you'd want to uninstall the serial-number version, and log out of or quit the CC Desktop app, then restart it, so it'll rescan what apps are installed or not.

[SOLVED] Major weird issues with KDE/Qt apps and unicode

Hi, I've tried to search for my problem, but nothing has showed up, so if this has already been answered, please forgive me.
Anyway, I use KDE as my primary desktop environment with SKIM as my unicode input method. After installing SKIM and Japanese fonts back when I first set Arch up, I have never had any issues with inputting unicode or displaying it in any program, whether that be irssi running through Konsole, or the song titles in Amarok. That all changed this afternoon, somehow...
The only major changes I can remember making to my system today are the following:
1.) I installed Awesome Window Manager to check it out
2.) I installed a pkgbuild of urxvt
3.) I made an .Xdefaults file and added these lines to customize my urxvt
After messing around with these things, I decided that Awesome wasn't a suitable WM for me, went back into KDE, and removed the package. I noticed a few strange issues after that though:
1. Foreign characters refuse to display properly in any terminal emulator.
2. Foreign characters come up as jumble in Konqueror now as well, when they never did before:
3. SKIM refuses to let me input Japanese characters with Anthy in any KDE app. The option for Japanese just isn't there, even though I have it installed:
4. Foreign characters display perfectly as tags for songs in Amarok, but if the music file itself has foreign characters in it, the title is garbled and the track is unplayable:
5. SKIM works absolutely fine in non-KDE apps like Firefox:
As seen in the last example, my Japanese fonts are all installed, and SKIM is working as it should in any non-KDE app, suggesting that there are no problems on that end. The issue seems to be with something in KDE, but I have no idea where to begin fixing it. Furthermore, I have no idea what could have caused this issue in the first place. I don't see how installing a window manager or terminal emulator package could have screwed up my fonts, and the .Xdefaults file I wrote just contained config information for urxvt. Nothing else. I even ended up deleting that, but it did not fix my problem.
If you could be of any help, I'd really appreciate it. I have a lot of files with foreign characters in them, and being able to read them is essential.
Last edited by LighthouseKeeper (2008-04-20 00:57:36)

I was just looking into locales, actually.
My current locale is:
LANG=en_US.utf8
LC_CTYPE="en_US.utf8"
LC_NUMERIC="en_US.utf8"
LC_TIME="en_US.utf8"
LC_COLLATE=C
LC_MONETARY="en_US.utf8"
LC_MESSAGES="en_US.utf8"
LC_PAPER="en_US.utf8"
LC_NAME="en_US.utf8"
LC_ADDRESS="en_US.utf8"
LC_TELEPHONE="en_US.utf8"
LC_MEASUREMENT="en_US.utf8"
LC_IDENTIFICATION="en_US.utf8"
LC_ALL=
and locale -a brings up:
C
POSIX
en_US.utf8
Is there anything here that could be causing this issue?
I'm curious how my locale got messed with in the first place if this is indeed the problem...
and here is my export:
declare -x COLORTERM=""
declare -x DESKTOP_SESSION="kde"
declare -x DISPLAY=":0.0"
declare -x DM_CONTROL="/var/run/xdmctl"
declare -x GS_LIB="/home/rael/.fonts"
declare -x GTK2_RC_FILES="/etc/gtk-2.0/gtkrc:/home/rael/.gtkrc-2.0:/home/rael/.kde/share/config/gtkrc-2.0"
declare -x GTK_IM_MODULE="scim"
declare -x GTK_RC_FILES="/etc/gtk/gtkrc:/home/rael/.gtkrc:/home/rael/.kde/share/config/gtkrc"
declare -x HOME="/home/rael"
declare -x KDE_FULL_SESSION="true"
declare -x KDE_MULTIHEAD="false"
declare -x KDE_SESSION_UID="1000"
declare -x KONSOLE_DCOP="DCOPRef(konsole-19951,konsole)"
declare -x KONSOLE_DCOP_SESSION="DCOPRef(konsole-19951,session-1)"
declare -x LOGNAME="rael"
declare -x OLDPWD
declare -x PATH="/opt/kde/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin:/usr/games"
declare -x PWD="/home/rael"
declare -x QT_IM_MODULE="scim"
declare -x SESSION_MANAGER="local/broadway:/tmp/.ICE-unix/19566"
declare -x SHELL="/bin/bash"
declare -x SHLVL="2"
declare -x SSH_AGENT_PID="19539"
declare -x SSH_AUTH_SOCK="/tmp/ssh-MtdHR19538/agent.19538"
declare -x TERM="xterm"
declare -x USER="rael"
declare -x WINDOWID="41943050"
declare -x XCURSOR_THEME="default"
declare -x XDM_MANAGED="/var/run/xdmctl/xdmctl-:0,maysd,mayfn,sched,rsvd,method=classic"
declare -x XMODIFIERS="@im=SCIM"
Last edited by LighthouseKeeper (2008-04-19 22:31:16)

Download issues with Android DPS App

Similar Messages

Maybe you are looking for