Download still in progress...agent never registers with SDS

Team,
I've installed agents on a number of hosts and successfully patched and upgraded them, and I've recently run into a problem where the agent never seems to complete it's registration with the SDS. The agent error.log shows this:
7381:2008-04-28_16:31:02 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
7381:2008-04-28_16:31:02 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://uce.example.com:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz
7381:2008-04-28_16:31:02 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
7381:2008-04-28_16:31:05 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
7381:2008-04-28_16:31:05 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
7381:2008-04-28_16:31:05 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
7381:2008-04-28_16:31:05 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.7381_vIaOAo .
7381:2008-04-28_16:31:05 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://uce.example.com:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz.sig
7381:2008-04-28_16:31:08 ERROR [ default_logger: source_unavailable: #0 ] 0 ShouldGetFile /opt/SUNWuce/agent//config_files/agent.tgz return with signature equals
7381:2008-04-28_16:31:34 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
7381:2008-04-28_16:31:34 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://uce.example.com:8002/cgi-bin/server.cgi
7381:2008-04-28_16:31:34 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
7381:2008-04-28_16:31:41 ERROR [ default_logger: source_unavailable: #0 ] 151068928 INFO: Download still in progress, retrying longer (knowledgebase_conflict_reconnect_retries=360, knowledgebase_conflict_reconnect_interval=5).
7381:2008-04-28_16:31:41 ERROR [ default_logger: source_unavailable: #0 ] 151066368 INFO: Waiting 5 seconds before retrying to communicate with parent.
7381:2008-04-28_16:31:46 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
7381:2008-04-28_16:31:46 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://uce.example.com:8002/cgi-bin/server.cgi
7381:2008-04-28_16:31:46 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
7381:2008-04-28_16:31:52 ERROR [ default_logger: source_unavailable: #0 ] 151068928 INFO: Download still in progress, retrying longer (knowledgebase_conflict_reconnect_retries=360,knowledgebase_conflict_reconnect_interval=5)....over and over again. I've tried several things to rectify this...stop/start the agent. Uninstall/reinstall the agent. I've stopped all other jobs on the SDS so this one can have all system resources. Nothing seems to be working and I can't find any information on either side to indicate why this is persisting.
Any ideas?
Thanks,
pb

Second this problem - various clients - Solaris 8 9 or 10 (all SPARC)
Only way I've been able to get around that for newly built hosts is to reboot after installation..
Very frustrating as we build a machine and then use UCE/CE to patch it - so we are leaving a relativly unpatched system on network till it can connect

Similar Messages

ERROR: Download still in progress - not making progress

I'm adding a new clients to a new UCE server (SUNOS 10 SPARC), but the agents on the SPARC machines cannot patch themselves due to the following errors. The agents show up on the server console, but remain "disconnected" and cannot be patched. The "Download still in progress" is repeated without end. Any suggestions?
Also the "uce_agents_check_prerequisites" doesn't appear to be available any more in the downloads site. Is there an alternative?
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_O8ailz .
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002///channels.xml.sig
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_Q8ailz .
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/blobs/scripts/SOLARIS_10_0_SPARC_detect.sh.sig
12889:2011-08-30_17:21:51 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:51 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz
12889:2011-08-30_17:21:51 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_S8ailz .
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz.sig
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 0 ShouldGetFile /opt/SUNWuce/agent//config_files/agent.tgz return with signature differs
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_T8ailz .
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz
12889:2011-08-30_17:22:42 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:22:42 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/cgi-bin/server.cgi
12889:2011-08-30_17:22:42 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:22:43 ERROR [ default_logger: source_unavailable: #0 ] 151068928 INFO: Download still in progress, retrying longer (knowledgebase_conflict_reconnect_retries=360, knowledgebase_conflict_reconnect_interval=30).
12889:2011-08-30_17:22:43 ERROR [ default_logger: source_unavailable: #0 ] 151066368 INFO: Waiting 30 seconds before retrying to communicate with parent.
12889:2011-08-30_17:23:13 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:23:13 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/cgi-bin/server.cgi
Edited by: user13075976 on Aug 30, 2011 10:33 AM
Edited by: user13075976 on Aug 30, 2011 10:36 AM

Second this problem - various clients - Solaris 8 9 or 10 (all SPARC)
Only way I've been able to get around that for newly built hosts is to reboot after installation..
Very frustrating as we build a machine and then use UCE/CE to patch it - so we are leaving a relativly unpatched system on network till it can connect

Running 3.6.6. Have blue bar below the menu bar that says "Downloading the latest applications" with a progress twirly, never ends.

Running 3.6.6. Tried 4 Beta, window was too large for monitor, couldn't resize, uninstalled. Now I have this blue bar below the menu bar in 3.6.6 that says "Downloading the latest applications" with a progress twirly, never ends. Removed 3.6.6 & reinstalled. Same problem.
== This happened ==
Every time Firefox opened
== I tried 4 beta, then went back to 3.6.6

That problem can be caused by the MSN® Toolbar (Tools > Add-ons > Plugins)
See [[Troubleshooting plugins]]

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I downloaded a program and it never shiowed up in the download box. I can't find it anywhere on my computer. I tried it a few different times and from different sites but still nothing. What can I try next?

I downloaded a program several times and from different download sites. It never showed up in the download box but it said all downloads have completed. I searched for it anywhere on my computer but the search produced no results.

I suppose there is a possibility that you have security software than may be blocking quarantining or even deleting the downloaded file.
Normally if Firefox says in the download manager that the file is downloaded then it is on your computer, and if you right click you should get the option to open the folder the er the downloaded file is in.
#Use keyboard keys '''Ctrl + J''' to open Firefox's download manager
#* or use ( press''' alt''' to display the menubar) Tools -> Downloads
# in the downloads window find the file entry you are looking for and right click
# use the option ''open containing folder''
* see [[downloads window]] <-- clickable link --
* and [[unable to download or save files]]
Please post back with how you get on.

Have serial for cs6 but it never came with a CD - how to download

I have my serial number for Adobe Master Collection CS6 but I got this through my school as part of the tuition I paid. It never came with the actual CD. I recently had to wipe out my computer so I need to download it again. The way I remember doing this is buy first clicking on the Adobe CS6 free trial then entering my serial number. There isn't an option anymore to download it unless I add it to my cart and pay again. How do I download it?

CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

Is Flash CS6 download still available to CC subscribers? I need to create a SWF to work with AS2.

Is Flash CS6 download still available to CC subscribers?
I need to create a SWF to work with AS2.

Get CS6 Apps from Cloud Subscription:
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html

HT1212 I have tried the above "never synced with iTunes and still get the passcode error. I do know the password, but all the iPad says is "iPad disabled connect to iTunes"

My 3 year old put in the wrong password too many times. I did not have the setting on that says to erase device. So why can't I unlock it? Is there a "backdoor" way to put in the password? like with iTunes?
Thanks!

There's no back door. The passcode is doing it's job.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

Download still available?

As I understand, the conversion tool is only available as a plugin for GoLive, not for DreamWeaver, nor standalone.
So if I encounter a Website with the source data present, I need a working GoLive installation to convert it.
Is GoLive still available somewhere (other than from suspicious download sites),
so I can use the test installation for the migration progress?
Thanks,
Michael Kauffmann

The 30-day trial is still there for CS2.
ftp://ftp.adobe.com/pub/adobe/golive/
(although I never messed with the conversion tool so I don't know if it was for GL9 only)

Can't download photoshop elements 13 purchased on line with download page showing not applicable. what must I do next?

Can't download Photoshop elements 13 purchased on line with download page showing not applicable.
What must I do next?
Years ago started with Photoshop 2.0 advanced to Photoshop Deluxe 4.0 so far so good.
Purchased Photoshop Elements 8 some time ago, but never got help because Elements never downloaded
and can only use it just to open pictures that's all.
Now I Purchased adobe Photoshop Elements 13 and if I can't download this one with no help
with a Trouble Ticket # 186456123 still pending after a week of promises from support calling
1-800-833-6687 after 4 phone calls, to call me back.
Who can I call to get my money back?
My name is Gunter Krummet (nicknamed Bill)
My phone number is 815-385-1761
My Email is [email protected]
Thank You to anyone that contacts me.

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT1212 I followed the I have never synced with itunes directions, and I appear to have lost everything that was on my itouch. Now what?

This is the most frustrating site and instructions. I got locked out of my iTouch and had to do a system restore. I followed the directions for having never synced with itunes directions, as I inheireted this itouch from my dad and when I tryed to sync before it looked like I would wipe out everything on it, which I DID NOT want to do. Now, after following the directions, I have wiped out everything that was on it, pictures, songs,...is there anyway to restore what was on the itouch?

Looking at those directions I am not seeing the device in itunes. Here is what I followed from: iOS: Forgotten passcode or device disabled after entering wrong passcode under if you have never synced your device with itunes.
"Connecting the device may result in this error message: "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device."
From: https://discussions.apple.com/thread/5229504
So I followed these directions and in step number 5 it was uploading (I believe) for about 30 minutes. When that was over there was no other directions and the device was still locked. So I repeated the steps. This time it restored the device, but when I get on it, I lost all music and pictures, along with a few apps. The apps are no big deal as they were free downloads, so I can redo those with no problems. Trying to follow your directions above and clicking through the links, my main problem is that I have no devices showing in itunes. I just down loaded it today, so it is the latest version. So what now?

Progress Bar Never 100%

Ok, kind of an odd issue, but I've got a script that can take a considerable amount of time to run due to all the sub-scripts. Anyway, I've setup a progress bar to work with it so I can tell how far it is. The only problem is, unless there is an alert or something that pauses the script (like a pop-up), the bar NEVER shows 100% full; even if I use an in-script pause such as the sleep command. Any ideas how to fix this? An example script is below and also never reaches 100% filled bar.
#target photoshop
var list = ["one", "two", "three", "four", "five", "six"];
var w = new Window ("palette");
var progress = progress_bar (w, list.length);
for (var i = 0; i < list.length; i++) {
    progress.value = i+1;
    // user functions
    $.sleep (400);
progress.parent.close();
function progress_bar (w, stop) {
    var pbar = w.add ("progressbar", undefined, 1, stop);
    pbar.preferredSize = [300,20];
    w.show ();
    return pbar;
I've also tried adding "w.show();" immediately after the "progress.value = i+1;" and still nothing; but like I said, if an alert pauses the script, it will work right. Any ideas?
Thanks for any help!

Lol, ok, now I feel stupid. I actually found the fix for the issue on my own. To fix it, simply replace the $.sleep(400); with w.update(); (the sleep is pointless and pretty much just slows down your script).

UpdatesDeployment - another job is still in progress

Hi there
I have 1 secondary site (out of around 70) that clients are not installing their Windows Updates correctly. The software updates icon appears in the system tray and when any user at the site tries to install the available updates, the UpdatesDeployment.log file on the PC contains the following lines:
    InstallUpdates Initiated by user
    Install not allow as another job is still in progress.
    InstallUpdates failed, error 80040703
    Failed to initiate installation of updates, error = 0x80040703
    EnumerateUpdates for action (UpdateActionInstall) - Total visible updates = 16
I am not able to determine what other job is still in progress, but does anyone know of a way to do this? And to hopefully cancel it if possible?   Every other site with the same deployment works properly.
Thanks in advance
John

None of these fixes have worked for me. I still have the problem.
Specifically, I am doing a bare metal Windows XP w/SP3 x86 deployment and have four sets of "install software updates" task sequence line items, along with corresponding “Post Update Reboot” line items after each one.
The 1st batch of 130 some updates install without error.
Then the 1st reboot reboot occurs, and a 2nd set of 40 or so updates (that were dependent on the 1st batch of updates) installs.
Then the 2nd reboot occurs.
Next a 3rd set of approximately 22+ updates, tries to install, but those 22+ updates are not even able to be installed into the CCM Cache because of what appears to be a “Locked Up SCCM Client Agent”, that thinks another job is still in
progress.
Request received – InstallTargetedUpdates. UpdatesDeploymentAgent   7/15/2011 1:55:46 PM, 1012 (0x03F4)
Install not allow as another job is still in progress. UpdatesDeploymentAgent   7/15/2011 1:55:46 PM, 1012 (0x03F4)
InstallTargetedUpdates failed, error 80040703. UpdatesDeploymentAgent   7/15/2011 1:55:46 PM, 1012 (0x03F4)
The following hotfix was released on June 28th 2011.
KB2509007 - Software Update for ConfigMgr 2007 SP2 (KB2509007)
However even after applying it and re-attempting to run the updates, the same problem still occurs.
We even eliminated all the updates, as a test, to just try 5 of the updates from the 3rd set along with their required pre-requisite updates, and we still have the problem.
The SCCM Client Agent appears to be locked up in incorrectly thinking that another job is still in progress.
Any ideas?

I have not been able to download previous purchases since the new update. I keep getting a message that says this computer is associated with an APPLEID and that I can download previous purchases again in 82 days with a different ID?? I only have ONE ID

I keep getting a message that says my computer is associated with an APPLE ID?? That I can download previous purchases again in 82 days with a different ID? I don't understand why it wont allow me to download previous purchases?? I never had this problem before the 10.5 update. I have emailed their help panel numerious times and they never do anything that remedies the problem?? I only have one computer and one ID I just dont understand what the problem is. I use a 3G connection to download music and sometimes the songs are not completely downloaded too and when I cant redownload them its like a waste of money.. I am so discouraged!!! Has any of you had this problem or know what I can do to fix this problem?? Thanks!!!

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

How can I delete a bad app completely from my iPad mini in order to re-download it as though I never had it?

How can I delete a bad app completely from my iPad mini in order to re-download it as though I never had it?

Yes, it will now always show that you purchased it, but with it deleted from ipad, when yu click the icon to download again, it will download the latest versioon available from the app store.
You cannot delete what is in the app store. nor can you erase your previous history of purchasing the app.

Download still in progress...agent never registers with SDS

Similar Messages

Maybe you are looking for