Downloaded books in DE format will not open in app on PC. The DE window will open but there will be nothing inside.

I recently downloaded DE to use an e-book I purchased on my PC.
The book downloads and is instructed to open in DE. The DE app window pops up, but there is no book, and I am unable to move the book to the app.
The DE is authorized.

You are not addressing Apple here.
You may leave feedback for Apple at:
http://www.apple.com/feedback

Similar Messages

  • Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Ok this is bizzare!
    Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
    So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
    AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
    I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

  • HT1430 my very new iphone5s will not turn on its as if the button no longer works is there any additonal swiping actions or hidden buttons i may have triggered accidently it is barely 2 weeks old and has no obvious signs of wear............not impressed A

    my very new iphone5s will not turn on its as if the button no longer works is there any additonal swiping actions or hidden buttons i may have triggered accidently it is barely 2 weeks old and has no obvious signs of wear............not impressed APPLE

    im hoping that by holding both the power and circle buttons it will spring back to life ..........somtimes apple you are too clever with your secert hidden butttons switches

  • I accidently closed my window with all my app tabs, now the only window that opens was a 2nd one I had open. How do I get back all my app tabs from the previous window, and why didn't it give me the usual warning you are closing more than one tab?

    I accidently closed the window with all my frequently used app tabs, now the only window that opens was an extra one I had opened. How do I get back all my app tabs from the previous window, and why didn't it give me the usual warning you are closing more than one tab? edit
    Details

    Then the (App) tabs from that window are lost unless you can restore an older copy of the sessionstore.js file (Time Machine?) that has that lost window.
    *http://kb.mozillazine.org/sessionstore.js

  • Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

    Hi, I am trying to launch illustrator after downloading it onto a Mac. I go to apps in finder and click on Adobe Illustrator but there are no files - such as configuration etc. What should I do?

    Thanks for responding, I downloaded the Creative Cloud Installer which is sitting under Devices in my Finder and then installed the Ai app which is appearing under Applications in the finder. I notice that in the launch tutorial there is the Adobe Creative Cloud sitting in the Apps folder above Ai - I don't have this. Hmm what to do?

  • My iPad will not send emails, even though all the settings seem correct.  But it receives them OK.

    My iPad will not send emails, even though all the settings seem correct.

    Patricia,
    When you say seem correct, have you checked in Settings > Mail, Contacts, Calendars > Account name > Outgoing Mail Server, SMTP and the outgoing server name is correct, then > Primary Server name is correct >  Host Name, User Name, redo the Password, Use SSL is OFF or ON according to your provider, may just try it both ways, Server Port, often 25 is the best to use.

  • HT1338 I have hand this Mac for 4 years. Today for the first time mail will not do anything when I hit send. It is receiving but it will not send. Can anyone help?

    I have an IMac running on 10.6.8 and today for the first time mail will not do anything when I hit send. Can anyone help out there?

    Check your Window menu -> Activity menu to see if anything is really not happening.  If it isn't happening, check your settings.

  • HT1725 My credit card is attached to my permanent US address but I am connected to the French Apple store.  My IPad shows the Us flag for the location but will not update my app bought in the US Store how do I change stores

    My iTunes IPad app bought in the Us Apple Store online will not download the update for HayDay.  It gives me a message that the app was not bought in the French store.  How do I change to the US Apple store to resume updates to my application HayDay.?

    Click here and follow the instructions to change the iTunes Store country.
    (85459)

  • I have been using firefox, then all of a sudden it will not connect says site is busy. I did an update but still will not connect with site

    I have been using firefox for a while, then it would not connect, I have change nothing on my computer. I double checked the firewall and browsers .
    I downloaded another exe and it still will not go to the page.
    What can I do

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • Firefox will not load up when i click the icon on my desktop, but still the same problem, i have checked and its loaded in the task manager and just wont load up, any help on this matter is strongly welcomed thank you mark

    as said nothing happens, i click the icon and nothing loads up. i have used 3 anti virus and spyware malware etc etc for 3 days i have been trying this, please note this install of windows 7 is fresh 5-6 days old. firefox was working fine then one day i tryed it and nothing.

    Hi,
    a) I don't have DMG either in applications but I have '''Document''' instead.
    So '''set "Document" to Always Ask '''going to Firefox>Preferences>Applications
    Now it will always ask if you want to Open or Save the file.
    b) If already downloaded, check what's under Get Info > Open with
    It should say Open With DiskImageMounter (see pic)
    https://support.cdn.mozilla.net/media/uploads/images/2014-07-24-03-56-33-60e1a9.png
    If not, select it. It's in Home>System>Library>CoreServices.
    See if it helps.

  • HT2311 iTunes will not install, it says I need version 10.6.8? But there are no available updates.

    I just bought new I5. It won't connect to Itunes( The iPhone “iPhone” cannot be used because it requires iTunes version 10.7 or later. Go to www.itunes.com to download the latest version of iTunes.).
    I try to download new Version of Itunes. It says that i need version Mac OS X 10.6.8 or later.
    How can I update to a newer version when my computer tells me there are no available updates?? I am confused!!

    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • I am trying to reinstall winows 7 on my iMac and it will not install. I am using the latest drivers ( v4.0) but I still get the black screen. I have made sure that the auto install and the drivers are at the root level on my USB flash drive.

    I am reinstalling W7 on my iMac and keep getting the black screen. I had installed W7 before when using Snow Leapord but W7 doesn't want to install with the latest drivers (v4.0). W7 was working with Lion but I had to uninstall W7 and now I cannot reinstall.

    NOTE: Just discovered that Adobe is making a bigger mess than any previously.
    They now have a 32-bit uninstaller for Flash '''''AND''''' a separate 64-bit uninstaller for Flash. You will need the 64-bit uninstaller for what you had installed above.
    *32-bit uninstaller: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe
    *64-bit uninstaller: download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_64bit.exe

  • Have purchased an album on i tunes but one song will not play. Tried to authorise the computer to play it but still not doing it

    Have bought new Now 35 album and one song won't play because it says it's not authorised on my computer! I have gone through the authorisation process but it still won't let me play the song. Does anyone know what I can do next? I did already download this song originally from You Tube but have since deleted it in case this is the cause of the unauthorisation.

    Delete and redownload it if doing so is free in your country.
    (86429)

  • I have 2 purchased ringtones in iTunes that will not load onto my iPhone4 with the new 5.0OS.

    I have 2 purchased ringtones in iTunes that will not load onto my iPhone4 with the new 5.0OS. Is there a fix?

    Message to use a new version of IE
    There is a problem with IE10+ in that it is mistakenly seen as being IE1.  To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)

  • My macbook just shut off and will not turn back on, connected to the charger. Help!

    My macbook just shut iff and will not turn back on, connected to the charger. HELP!

    Hi there,... what color is the charge indicator on the charger connector? orange or green.
    Did you let your Air die from power?  Or has it been stored away for a while on a very low charge?
    What happens when you try to power on? nothing?
    If you cannot get to recovery mode and cannot power on at all, then its time for a service call to Apple for in shop full diagnosis and possible repair.

Maybe you are looking for

  • How do I use an HP dvd640 Lightscribe with my Macbook?

    I have a 15 inch Macbook, 10.7 OS, 2.2 Ghz; and an HP Lighscribe model dvd640. I downloaded Lightscribe's installation software for Mac at http://www.lightscribe.com/downloadSection/index.aspx. After installing, I can't find any Lightscribe applicati

  • File: \BCD file is missing some required information

    When trying to boot my HP Split x2 laptop I'm getting a BLUE SCREEN error "Recovery  Your PC needs to be repaired. The Boot Configuration Data file is missing some required information.  File: \BCD  Error Code: 0xc0000034.  I've tried everything that

  • Dynamic text box and minus variable?

    I have a text box with dynamic text set to display p variable but when the variable goes < 0 it only displays a '-'. im using: onClipEvent (enterFrame) { p = my_object._x; How can I correct this? Also another question with 'my_object._x' it returns t

  • Remote Monitering problem in uccx 8.0.2

    Hi All, We are using uccx 8.0.2 ,We configured remote monitering feature in call center ,Some time monitering some number not able hear conversation the phone is silent after that all agent desktop hanging around 1 min waht is problem please conisder

  • External Router, VPN, Configuration

    Dear Community, at our company we've bought a Cisco 876 Router with the Enterprise Feature Set. Now I have to configure the System. I would like to do the following: Our Carrier has assignes us a transfer net for routing and a network for our router.