Dpubt in MM Modulefrom ABAP point of View

Hi Guys,
Can anybody tell where can we find the field which has the meaning like Shipping Address Code ,Confirm Order and Delivery date?
Thanks,
Gopi

Hi,
from these tables search the links between them.
Delivery
Transaction code: VL01N (Create Outbound Delivery With Order Ref)
Tables:
VBUK : Header status and administrative data
LIKP : Delivery: Header data
VBUP : Item status
LIPS : Delivery: Item data
VBPA : Sales document: Partner
SHIPMENT Transaction Code: VT01
Tables:
LIKP : Delivery header
VTTK : Shipment header
VEKP : Shipping unit header
LIPS : Delivery item
there is some exits in that u can see all of them
EXIT_SAPLMCS1_001
EXIT_SAPLMCS1_002
EXIT_SAPLMCS5_001
EXIT_SAPLMCS5_002
EXIT_SAPLMCS6_001
EXIT_SAPLMCS6_002
based on these exits u can search tables independently.
it may helpful to u.
Regards
Praveen

Similar Messages

Diference bet. sap 4.6b,4.6c & 4.7e from abap point of view

hi,
i want to know what are the diferences between the sap versions 4.6b, 4.6c and 4.7e.
at my home i am having 4.6b and in my institute i am having 4.7e.
will there be any difference sintax wise, look and feel wise in reports,alv's, scripts, smartforms, screen designing,bdc etc.
regards,
maqsood

There is hardly any difference between 46B and 46C from ABAP poitn of view.
However there is quite a lot of new features/tools/syntax changes in 4.70, which is based on WAS 6.20.
(Web-extension/BSP, Unicode check, Code Inspector/SCOV, extended SE80, XSLT, New package concept etc)
The best is check SE38 Application help "New features in ABAP" and check the Changes in Release 6.10 & 6.20 section.
Same is also available in the Online help ( help.sap.com )
Peter

Difference between sap 4.7e and Ecc6.0 in ABAP point of wiew

hi experts,
can any one explain about the differences b/n sap 4.7e and sap ecc6.0 in ABAP point of view.
thanks in advance.
rgds,
nag.

From the ABAP perspective.
The WS_* function modules used in 4.6c has become obsolete from 4.7C. All the WS_* FMs have been replaced by GUI_* FMs.
(ii) Concept of Unicode is introduced.
(iii) Few tables have been modified in ECC6.0.
Tables TVARV & TTREX have been replaced by TVARVC & TTREXN respectively.
For functional differences please check out the following links:
http://solutionbrowser.erp.sap.fmpmedia.com/
Re: SAP version differences 4.5b, 4.6c and ECC6.0
You can find the difference in release notes of each SAP version.
Here are the links.
http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
If its useful reward points

Can any body tell me about sap-plm from technical point of view

In sap-plm from the development point of view what abapers task

Hi Prasoon,
PLM very wide area but from ABAP point of view it depends which area you are working on, like it includes Bill of Materials, Document Management System, Classifications, Product Structure Browser, Engineering Change Mangement, etc within R/3 and apart from this it even includes Project System
on Web application Systems it includes Collaboration Projects & Collaboration Folders.
ABAP work comes for enhancements, Functional Modules, User Exists, Feild Exists, Interfaces(RFC) for CAD Integrations etc, & Reports like ALV etc.
It Depends which part of PLM you are working on & what is the requirement where in ABAP development is required so in general it is difficult to answer this question but for any particular/specific requirements anybody will answer.
Hope you might have got the fair idea of PLM
Regards
Rehman
Mark Useful Answers

Client Merge! precautions to be taken from BW point of view

Hi,
We are in a process of merging two clients in R/3 which are typical source systems for BW!
What are the steps that we should take care of while the client merge is on from R/3 side.
these two clients are ofcourse very important for BW system as almost all for everydata load the extraction logic in FM to the ABAP routine in selection of infopacakge is different!
in a scenario such as this, what are the things that should i make a note from BW point of view?
Raj

Hi,
1.Internal table with header line will not support in ECC 6.0 for that u need to create internal table and work area using TYPES.
2.Mostly u need to do some PATCH WORK for the STANDARD programmes.
Patch work in the sense for SPAU objects in Mysap is there any code written by client(INSERT {....END INSERT....}) this type of code u need to add in ECC 6.0 code....
3.Mostly u have to resolve EPC(Extended program check) errors.
In that u will find so many type of errors...Field attribute errors,Perform interface errors,Obsolete stetement errors,....etc.
4.First thing u need to what r the SCOPE and OUT OF SCOPE in your upgradation.
5.If u find any Fmodules obsolete...U just press F1 on that Fmodule it will show which function module can useful instead of that obsolete one...
6.If they want UNI CODE compatiable .....
EX Report...
Go to the attributes of the report...
There u can c a check box to check UNI CODE Errors...
U have to resolve these errors also...
After doing all these things u have to show 0 errors on CODE INSPECTOR fro each n every object...
Thats t as per my knowledge...
Regards,
Kishore Reddy.

Comparison of SAP R/3 4.7 with SAP ERP 6.0 in Basis point of view

Hi Experts,
Can we compare R/3 4.7 and ECC 6.0 in Basis point of view.
Say for example Password is case sensitive in new version, DBACOCKPIT added for central maintenance of database.
Like this can we list out some of the changes or differences.
It will be more helpful
Regards
KT

Hi,
compare to 4.7
1.New ABAP editor added like if u write code in abap editor ,using if coditions and select statments it automatically shows the link endif, like if .. endif,select ...endselect.
2.New abap debugger compare to the classic debugger.
3.DBACOCKPIT
Missing indexes of various database tablesu2019 and the transaction to reactivate all the missing indexes is u2018DBACOCKPITu2019. Below is the screenshot of the transaction DBACOCKPIT.
Regards,
Madhu

Performance point of view

Hi every one,
I am new to XI . I have a small doubt in Mappings.
In XI we have 4 types of mappings:
1.Graphical mapping
2.XSLT mapping,
3.Java Mapping
4.ABAP mapping
In case of performance point of view which one is best .
Plz explain me in details .
I will give full points for correct answers.
Thanks and Regards,
P.Naganjana Reddy

Hi,
refer to these links:
Re: Why xslt mapping?
http://searchsap.techtarget.com/tip/0,289483,sid21_gci1217018,00.html
/people/r.eijpe/blog/2006/02/20/xml-dom-processing-in-abap-part-iiib150-xml-dom-within-sap-xi-abap-mapping
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8a57d190-0201-0010-9e87-d8f327e1dba7
Regards,
Nithiyanandam

Regarding "z"tractions IN mm point of view

hi sapguru
i just want to know what is Z tractions or what role of Z tractions play in implimentaions,pls explain in MM POINT OF view
REGARD'S
SANDEEP

Hi,
What ever is not possible thru standard SAP we have to develop Z programmes for that and to run this Z programmrs Z transactions are required.( provided that required data is available in tables)
For example C form tracking or purchase order ammendment is not in standard SAP for thsi we have to develop Z prog.
Other example is when there is a requirement of report which is not in std SAP we are creatibng reports thru ABAP for this Z Prog are reqd and to run this Z Prog Z transactions are reqd.
Regards
Kedar Kulkarni
Edited by: Kedar Kulkarni on Feb 5, 2008 12:03 PM

Please validate my logic performance point of view:

Please validate my logic performance point of view:
logic I wrote :
   LOOP AT i_mara INTO wa_mara.
*-----For material description, go to makt table.
      SELECT SINGLE maktx
        FROM makt
        INTO l_maktx
       WHERE matnr = lwa_mara-matnr
         AND SPRAS = 'E'.
      IF sy-subrc = 0.
        wa_mara-MAKTX = l_maktx.
      ENDIF.        " IF sy-subrc = 0.
*-----For Recurring Inspection, go to marc table.
      SELECT prfrq
        FROM marc
        INTO l_prfrq
        UP TO 1 ROWS
       WHERE matnr = lwa_mara-matnr.
      ENDSELECT.
      IF sy-subrc = 0.
        wa_mara-prfrq = l_prfrq.
      ENDIF.          " IF sy-subrc = 0.
      MODIFY TABLE i_mara FROM wa_mara
             TRANSPORTING maktx.
      CLEAR : wa_mara.
   ENDLOOP.   " LOOP AT i_mara INTO wa_mara.
Or is it better below : ?
To SELECT all the maktx values from makt and all prfrq values from marc
in two internal tables and
Loop at i_mara.
LOOP at all maktx itab
and pass corresponding maktx values into i_mara table
and pass corresponding prfrq values into i_mara table
ENDLOOP.
OR
is there any better performance logic you suggest ?
THANKS IN ADVANCE.

ok this is very funny so if someone gets a good way to code he should wait till he gets 1198 points till he write a performance wiki
so that means ppl who has high SDN points only can write wiki
for your information wiki definition is
[http://en.wikipedia.org/wiki/Wiki |http://en.wikipedia.org/wiki/Wiki]
its all about contribution and sharing.
did you try that code on a production or a Quality server. If you did you wont say that coz the results i have shown in that blog is what i my self tested on a Quality system of our client.
and for your information i did my internship at a SAP AFS consultancy firm and i created the account at that time. I have joined that company and now working as a developer over there.
if you have worked on a client system development on SD and MM you will know that most of the time
we use header and item tables like
likp,lips
vbak,vbap
vbrk,vbrp
most of the time we come across nested loops with smiler kind of condition.
in this Q he has MATNR as reference.
if you see it properly you can see both tables are sorted.
and the select statement is for all entries.
for your information there can be a delivery document item with out a header if you are aware of DB concepts in that case there will be a foreign key error.
ok lets think about a situation like that even in that case if there ant any header data then simply the client wont request for that record.( you would know if you have worked with clients )
last but not least i dont care about my points rate at SDN i just wanted to share what i know coz anyway i have a very good job here. dont try to put down ppl just because they are new.
Thomas Zloch : i never told its my code i saw it some where then i checked and i bogged it so that i can get it when i want and i saw it in se30 ( its not se38 ) but i know most of ABAP developers dont check it much so i just wanted to help.
Rui Pedro Dantas   : ya your correct we dont need to use it most of the time since sorted table is easy but there are programs which works with bulky data load we can use it in places like that. Thanks for talking the truth
Nafran
sorry if i said anything to hurt anyone.

Report for Paid Invoices from AP Point of view.

Hello Gurus,
I am looking for a Report from SAP which will give me the Paid Invoices Information from Accounts Payable Point of view for a Particular Period which should cover the below information...
Entity
Invoice #
Invoice Date
Vendor Name
Invoice Amount
Currency
NET terms - NT30, NT 00 like wise
Net due date -
Paid Date
Document Types
Document Number
Please let me know the Standard Report Transaction Code ASAP.Quick response will be appreciated.
Thanks,
B

Hi:
Refer to FBL1N - Display/Change Line Items in accounts payable.
Select vendor accout,co.code,cleared items on a particular date and execute.
From change layout (Ctrl+F8), you can select payment terms,Net due date,account type,account document
Please let me know if you need more information.
Assign points if useful.
Regards
Sridhar M

In BI 7,in loading point of view what is the difference

Hello All
In BI 7,in loading point of view
Upto the first level(upto PSA) we use infopackage and from that layer onwards we use DTP's.
My question is why do we want to use DTPs there? Why cant we use infopackage only?
What is the advantage by using this DTPs for loading the data within BI
Please let me know in this regard
Many Thanks
Swami

Hi Swami,
Although not recommended you can still use infopackages if you want in BI 7.x. The introduction of the DTP was to overcome some disadvantages of using infopackages up to and including release 3.x to load the data targets (especially with datamarts where one infopackage loads several data targets,
if something goes wrong with the load to one of these data targets then it can be very difficult to correct).
This section contains some arguments in brief why the DTP was introduced with BI 7.0 :
Transfer from one source to one target
BW 3.X
One InfoPackage / Request supplies data for several data targets
Fixed sequence of steps (DataSource / transfer rules / update rules / data target)
Fixed source type: Combination DataSource/source system
Fixed target type: Cube or ODS object or master data
No init selection for extraction from infoprovider
One request can produce several error requests, depending on the data targets
No error handling into ODS Objects
Delta management
BI 3.X: The Receiver for DataSources is merely a logical system, which makes it impossible to have a separate delta management for several data targets within
one system
BI 7.0
Data Transfer Process transports data from one data source to one data target; new source and target types can easily be defined
Arbitrary number of steps (filter objects/transformations) between two persistent objects
Init selection available
Request produces error records stored in generic error stack
Error handling into ODS Objects possible
Resume from persistent buffer
Delta management
BI 7.0: The delta management is maintained by the data transfer process which connects arbitrary sources and targets
I hope the above helps.
Des.

Batch managment from MM point of view

Dear Friends,
I want to learn the Batch management from MM point of view.
Can you please provide me the material which will explain me how to configure the SAP system for batch managment from MM point of view.
Thanks a lot
Nilesh

Please check these answered links:
Batch management
batch management
Batch Management
Edited by: Afshad Irani on Jun 14, 2010 3:15 PM

In SD point of view , that r things we can check in Screen MD04

In SD point of view , that r things we can check in Screen MD04
Key areas and feilds in MD04 to look after for SD and PP integration and respective roles of consultants.

yeap ur correct just we have to check in mod04 what happening in production procurment and make to order that means forcast sales . depond on forcast sales manufecturing is going on so we can only see that process i sgoing or not k thanku

Document Management System for sap mm point of view steps

Hi All.
Document management system for sap mm point of view steps required.
Thanks in advance for all sap mm forum members.
Regards.
Parameshwar

Hi,
Customizing settings can be collected by processes into Business Configuration Sets (BC Sets). BC Sets make Customizing more transparent by documenting and analyzing the Customizing settings. They can also be used for a group rollout, where the customizing settings are bundled by the group headquarters and passed on in a structured way to its subsidiaries.
BC Sets are provided by SAP for selected industry sectors, and customers can also create their own.
When a BC Set is created, values and combinations of values are copied from the original Customizing tables into the BC Set and can be copied into in the tables, views and view clusters in the customer system. The BC Sets are always transported into the customer system in which Customizing is performed.
Advantages of using BC Sets:
1.     Efficient group rollout.
2.     Industry sector systems are easier to create and maintain.
3.     Customizing can be performed at a business level.
4.     Change Management is quicker and safer.
5.     Upgrade is simpler.
To create BC sets follow the below step:
Choose Tools ® Customizing ® Business Configuration Sets® Maintenance in the SAP
menu, or enter the transaction code SCPR3 in the command field.
Choose Bus.Conf.Set ® Create.

Data loading - Member containing comma taken in point-of-view

Hi,
I tried loading date into planning. My point-of-View contains a member which has comma in it.
When loading it is considering that member as two different members.
Has anyone tried loading data into planning with members having comma.
Eg. Item No.,Start Date,Point-of-View,Data load Cube Name
30103,11-02-2011,"Actual,Version1,Dazzing Infotech, Inc,230"Capex
I have 6 dimensions say.
Dazzing Infotech, Inc is a member in dimension. It has comma which is seperating it as two members.
Error when loading is "Dazzing Infotech" doesn't exist or you do not have access to it.
Has anyone worked on this issue previously.
Thanks

I agree that it would be cleaner to use the commas in an alias rather than a member name.
Cheers
John
http://john-goodwin.blogspot.com/

Dpubt in MM Modulefrom ABAP point of View

Similar Messages

Maybe you are looking for