DR-8A Doesnt want to burn
i have the DR-8A and no matter what i try Cd, DVD-, DVD+ it just will not burn.
the first time this happened i plugged it into another machine and it wouldnt work there either, i couldnt even update the firmware. So MSI sent me a new card and i am having the same problem, i cannot burn it gets to about 5% and the write buffer goes to 0 and thats it.. i have updated the firmware and plugged it into another comp and this time it worked.. so does anyone know of any campadability problems with any of the below parts..
GA 7N400 Pro 2
Radeon 9700 Pro
AMD XP3200+
Sony 16x DVD READER
200 GB Maxtor Sata Hdd
Kingston 512mb DDR
2x 80 GB WD IDE 7200
Audigy II
What software are you using to burn the DVDs? Try using Nero 6 or Alcohol 120%.
Similar Messages
-
My MacBook Pro doesn't want to burn DL DVD?
Iv'e been tring to burn DL DVDs on my MacBook Pro but it just doesnt want too.
What should I do? I don't want to buy a external DVD burner.
Does anyone know if APPLE could install an internal DVD burner that can burn DL DVDs?
MacBook Pro 1, 1 Mac OS X (10.4.7)Due to size constraints inside the MacBook Pro case, the higher-speed dual layer drives just didn't fit in the MacBook Pro at the time of design and manufacture. There are some drives on the horizon that will fit in this form factor - it remains to be seen what will work, or what Apple themselves includes in the later MacBook Pro revisions.
In the meanwhile, any Firewire or USB 2.0 drive should work just fine. iDVD in iLife '06 has been updated to permit burning of projects on third party available DVD burners now.
If this is helpful or solves your problem, please indicate this by clicking the appropriate icon in the header of this response. -
I bought a cd and downloaded it to my itunes account. I want to burn one to keep in my car, but dont get that option. how can i burn it from my itunes account?
Hello lindsey0315,
I read your post, and I have linked to an article that will instruct you on how to create CDs with iTunes:
iTunes 11 for Windows: Create your own CDs and DVDs
http://support.apple.com/kb/PH12348
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
I just finished creating a movie using IMovie and want to burn it to a DVD and loop it. Since I just purchased this mac it looks like they no longer include IDVD. Is there something out there to help me do this. I am new to MAC and any help would be greatly appreciated. Thanks
There is free open source software called Burn that will burn DVDs. Here is a link.
If you wish to pay for software, there are many, including TOAST TITANIUM from Roxio. Apple's retail copy of iLife 11, and Apple's Compressor.
Of these, I would say that iDVD is known for being able to create very professional looking DVDs with intros, menus, lots of interesting templates.
Toast is much simpler and the menus and templates are more plain.
Compressor is a professional tool that does a lot more than make DVDs. Don't expect much in the way of menus or templates.
Burn, I have never tried, since I have iDVD and Toast for those ocasions when I need to burn a DVD. However, since it is free, I think it is worth a try.
Each software package is a little different, but in general, in iMovie, you can use the SHARE menu to SHARE/MOVIE in Large size. Save the movie to your desktop or someplace you can easily find it. Then drag it into the tool of your choice. You can alsouse SHARE/MEDIA BROWSER/LARGE if you have iDVD or Toast. -
I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?
Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help. -
What is the easiest way to burn my imovies onto DVD's? I want to burn movies as I create them and then continue to add more movies to the same DVD as the years go by -- until the DVD is full! Is this possible?
You might also want to post this in the iMovie forum https://discussions.apple.com/community/ilife/imovie
-
I installed Itune 11 on my new Dell Inspiron, windows 7, computer.
I wanted to burn a cd from a new playlist I created in my library. The "burn to CD" option does not come up anywhere? It's not under "File" and the "tool"at the bottom of the page does not have an option for "burn to cd."
I've made many cds in the past off of OTHER playlists so I'm not sure why it's do difficult now? What am I doing wrong?
A huge issue to begin with was the songs that Icloud recognized on in my library when I first installed the Itunes 11. I since was able to "hide"all the old songs but that didn't help my "burning to cd" issue. Any help would be greatly appreciated, I"m spending way too much time trying to figure this out.
Thank you!!Good lord.
I'd like to try doing a "Run as administrator" on your iTunes.
Quit iTunes first.
In Computer, open Local Disk C: or whichever drive you have your program files installed on.
If you have a 32-bit Windows, open the "Program files" folder.
If you have a 64-bit Windows, open the "Program Files (x86)" folder.
Open the "iTunes" folder.
Right-click on the iTunes.exe file and select "run as administrator".
Is "Burn Playlist to Disc" showing up in the contextual menu now? -
My ipod touch doesnt want show in itunes but it shows as a device on my computers desktop what should i do?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows -
iMovie '11, what steps am I missing, when I go to SHARE, IDVD is grey and not activated, only ITUNES and MEDIA BROWSER? I want to burn a DVD.
Share your movie to the Media Browser. Then, in iDVD, drag your movie in from the Media Browser at the bottom right.
THe Share to iDVD option is only activated if your source material is DV or AVCHD. -
I downloaded a movie from iTunes. I wanted to burn a DVD of the movie which I could play on my home entertainment system. After I had burned the DVD I tried to play the movie from it on the computer and got the message " You can't open the application mediaioserver because it may be damaged or incomplete". What is this all about? Are there settings I need to change? PS: I tried to play the DVD on my home DVD player and it also doesn't work. Help!
Klaus: Does this mean that I can only watch this movie on my computer and ipad not on my home big screen system?
-
How do I fix error 4310 when i want to burn a cd in windows 8?
Hi ,
How can I fix error 3410 when I want to burn a cd in I Tunes on my Windows 8 Lenovo G580 Notebook?Microsoft Windows Vista x64 x64 Home Premium Edition Service Pack 2 (Build 6002)
SAMSUNG ELECTRONICS CO., LTD. 350V5C/350V5X/350V4C/350V4X/351V5C/351V5X/351V4C/351V4X/3540VC/3
iTunes 11.0.2.26
QuickTime not available
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0164B8580B9D29C8
Current user is an administrator.
The current local date and time is 2013-04-05 20:52:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 (x64) is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: TSSTcorp CDDVDW, Rev
Audio CD in drive.
Found 13 songs on CD, playing time 61:26 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:39:55
Track 3, start time 08:17:50
Track 4, start time 12:53:69
Track 5, start time 18:24:17
Track 6, start time 28:46:23
Track 7, start time 34:08:20
Track 8, start time 38:02:72
Track 9, start time 44:08:57
Track 10, start time 47:24:54
Track 11, start time 50:41:26
Track 12, start time 55:01:28
Track 13, start time 57:47:70
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 10 16 20 24.
The drive CDRW speeds are: 10.
The drive DVDR speeds are: 10.
The drive DVDRW speeds are: 10.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D: TSSTcorp CDDVDW on CDR media at speed 10X.
I have the same problem and here is my diagnostics.....please help this is really annoying -
I just purchased Final Cut Pro X and I want to burn a dvd but the tabs do not see the option of SHARE. Is there something wrong with my Final Cut Pro X?
It's also under the File menu.
-
my iphone 4 doesnt want to start . all it shows is the apple icon.i have tried holding the home button together with the lock button. nothing seems to work . please help.
Plug the iPhone in with the Wall Charger. Then while plugged in do the Reset again, hold both Home and Power buttons until the iPhone Restarts. This usually begins to happen in less than 20 seconds time.
If you this does not work you can try to Restore the Firmware on your iPhone. If you decide to do this, connect your iPhone to your computer with iTunes open. Hold both the Home and Power buttons until the iPhone is detected by iTunes in Recovery Mode, this takes about 20 seconds time. Restore your iPhone.
If this does not work, you can try to Restore the Firmware on your iPhone in DFU Mode. Connect your iPhone to your computer with iTunes open. Hold both Home and Power buttons for exactly 10 seconds, release the Power Button and keep holding the Home Button until iTunes recognizes the iPhone in Recovery Mode, about 20 seconds more time. Restore the iPhone.
If this does not work and you have Warranty or AppleCare Coverage take your iPhone to Apple for resolution of the problem. -
A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
I know there are programs like TOAST that will do this, but it is expensive.
I would be very grateful for any assistance.Burn will not do what you want, and there is no real substutute for iDVD.
Why is there no iDVD on my new Mac?
Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced: http://www.gizmag.com/windows-8-no-dvd-playback/22443/
In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past. -
Now i want to burn it to a dvd using a flashdrive and burning it on another PC that has a burner. Does anyone know how i can do this? My macbook air HAS IDVD....
Here are dedicated discussion forums for iMovie and iDVD, where you might more likely find help.
Maybe you are looking for
-
Change order of songs on itunes
How do I change the order of the songs in itunes? I have albums out of chronological order and want to move them so that when I play all the songs from a band on my IPOD it plays them from the first to last. Thanks for any help.
-
Screen now has a yellow tinge...
Last night I started up my G5. I clicked on mail and while moving the arrow to select an email my screen changed to a yellowish tinge. My computer works fine otherwise. I have tried fixing it in preferences, with no luck. Have I clicked on something
-
Missing photos after camera library updated itself
this morning when i went to take some photos, i went into the camera app and it did some library update which has never happened before. then i went into my camera roll just before and all my photos and videos from the last month are missing, and the
-
Any help would be greatly appreciated
-
Setting Portlet Preference in Backing File for Clipper Portlet
Hi All, I have a clipper portlet, and I am setting the preferences(for form based authentication & passing application data dynamically) in the backing file which is then associated to the Clipper portlet. I looked up at the clipper constants that ar