Draft Information within a Statement

We are looking into the Statement Notification Refresh Program (R03B500X) and within the Processing Options you need to specify which Print Program to use.
One of the options is the R03B5006 - Statement Print with Draft
The description I found on that Statement Print was - This is the statement print program that you use when you want to include draft information.
Question: What is draft information?

Yes, a lot of data!
It's interesting that you can write even more (I wrote about 1 Mb),
but everything over 4,854 is flushed during the save.
http://indisnip.wordpress.com/2010/07/31/saving-script-data-within-document/#comment-511
Marijan (tomaxxi)

Similar Messages

  • SET CHAINED command not allowed within multi-statement transaction

    Hi,
    i need to do one transaction and i am setting autocommit(false) and
    once i am don ewith my 2 inserts i am settins it to true.
    i have like 20 thousand rows and when it is working fine for some inserts but after that it is throwing
    "SET CHAINED command not allowed within multi-statement transaction".
    can anyone please help me.

    You can find some information here:
    http://publib.boulder.ibm.com/infocenter/wsphelp/index.jsp?topic=/com.ibm.websphere.nd.doc/info/ae/ae/rtrb_dsaccess.html
    it's first problem for sybase DB

  • Information within the home hub

    Has anyone recently challenged the accuracy of the online monitor for Broad Band usage?
    I have been told I am going to breach the limit despite being on holiday.
    When I looked into the home hub the data usage over a connection time of nearly ten days amounted to a little over 3.3GB (figure1) whereas the data for the online monitor was nearly 17GB (figure 2).
    I phoned BT, the poor advisor I spoke with had no idea that this information was stored in the home hub and was completely out of their depth, unfortunately this meant the discussion was of no benefit whatsoever.
    The information within the help section of the home hub clearly states that the data usage corresponds to the connection time (in this instance almost identical to the online usage monitor) (figure 3).
    How can I challenge BT on this massive discrepancy and avoid being overcharged for the etherial data that I am not using?
    If a BT technician can explain the discrepancy to help me understand I would be most grateful, if not then anyone with limited data usage please start to challenge BT with the data they so helpfully store for us in the home hub
    Solved!
    Go to Solution.

    as has been posted many times before the hub refreshes the usage figure at around 5gb or every time the hub restarts
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Sybase:  SET CHAINED command not allowed within multi-statement transaction

    Hello,
    I'm getting the error message "SET CHAINED command not allowed within
    multi-statement transaction" for CMP Entity beans against Sybase.
    The errors appear in my jdbc.log in this order:
    010SM: This database does not support the initial proposed set of
    capabilities, retrying.) SQLState(010SM)
    JZ0EM: End of data.
    JZ0SJ: Metadata accessor information was not found on this database.
    Please install the required tables
    as mentioned in the jConnect documentation.
    010SL: Out-of-date metadata accessor information was found on this
    database. Ask your database administrat
    or to load the latest scripts.) SQLState(010SL)
    SQLState(ZZZZZ) vendor code(226)
    com.sybase.jdbc2.jdbc.SybSQLException: SET CHAINED command not allowed
    within multi-statement transaction.
    I'm using JConnect 5.5, WebLogic 6.1 sp3, Solaris 8, and Sybase 11.
    The weird thing is, the app works on a box running 6.1 sp2 and Win2k
    Prof.
    Any ideas?
    Thanks!
    Dan

    Hi Dan,
    There is a patch for this sybase problem, please contact [email protected] to
    get a temp patch.
    sree
    "Dan Blaner" <[email protected]> wrote in message
    news:[email protected]..
    Hello,
    I'm getting the error message "SET CHAINED command not allowed within
    multi-statement transaction" for CMP Entity beans against Sybase.
    The errors appear in my jdbc.log in this order:
    010SM: This database does not support the initial proposed set of
    capabilities, retrying.) SQLState(010SM)
    JZ0EM: End of data.
    JZ0SJ: Metadata accessor information was not found on this database.
    Please install the required tables
    as mentioned in the jConnect documentation.
    010SL: Out-of-date metadata accessor information was found on this
    database. Ask your database administrat
    or to load the latest scripts.) SQLState(010SL)
    SQLState(ZZZZZ) vendor code(226)
    com.sybase.jdbc2.jdbc.SybSQLException: SET CHAINED command not allowed
    within multi-statement transaction.
    I'm using JConnect 5.5, WebLogic 6.1 sp3, Solaris 8, and Sybase 11.
    The weird thing is, the app works on a box running 6.1 sp2 and Win2k
    Prof.
    Any ideas?
    Thanks!
    Dan

  • How to set client within SQL statement without using another pl/sql stmt.

    I have a following select statement
    SELECT SUM (w.prior_forecasted_costs + w.prior_committed_costs)
    FROM xxsuf.job_cost_summary_table w,
    apps.pa_periods p,
    pa.pa_resources bz,
    pa.pa_resource_list_members cz,
    pa.pa_tasks dz
    WHERE w.project_id = z.project_id
    AND w.task_id = dz.task_id
    AND dz.task_number '98000'
    AND w.resource_list_member_id = cz.resource_list_member_id
    AND cz.resource_id = bz.resource_id
    AND NOT EXISTS (SELECT NULL
    FROM pa.pa_tasks zz
    WHERE zz.parent_task_id = dz.task_id)
    AND w.resource_list_member_id != 1000
    AND p.period_name = w.pa_period
    AND p.current_pa_period_flag = 'Y'
    Above select statement uses pa_periods view which only works when I set my client using "exec DBMS_Application_Info.set_client_info(83);" in Toad or SQL*Plus session.
    I was wondering how can I achieve it within select statement. so that I don't have to use another PL/SQL statement to set my client. Is there anyway to set client with my org id within above select statement ?
    Please advise.
    --Rakesh                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    You can simply create a function which calls dbms_application_info and use that in your sql statement as in
    SQL> create or replace function set_client_info (i_info varchar2)
       return varchar2
    as
    begin
       dbms_application_info.set_client_info (i_info);
       return i_info;
    end set_client_info;
    Function created.
    SQL> create or replace view v_emp
    as
      select * from emp where empno = to_number(sys_context('userenv','client_info'))
    View created.
    SQL> select ename from v_emp where set_client_info(7788) is not null
    ENAME    
    SCOTT    
    1 row selected.
    SQL> select ename from v_emp where set_client_info(7900) is not null
    ENAME    
    JAMES    
    1 row selected.

  • ITunes opens and within seconds states it has to close. I've uninstalled

    iTunes will open, but within seconds states it 'Has to close'. Occasionally, I'll see a notice for an update and quickly click to 'Download update?', but when I click on 'Download', a new page opens with 'Thanx for updating', except it hasn't downloaded the update. I have also uninstalled and reinstalled iTunes several times, but that hasn't helped. My phone is a 5S and it won't sync to iTunes either.
    I appreciate any suggestions. Thanx.

    Try working through TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues to start with.
    Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Audio playback from within a state machine without halting execution

    I have created a state machine that acquires and analyzes an input signal and transitions states based on triggers detected within that signal.  In one particular state I need to play back a prerecorded file (right now I am just using a .wav file for testing purposes).  I understand that due to the data flow model the state machine hangs up during the playback state until the playback is finished, but I need to find someway around this.  Obviously, whenever the machine hangs up it cannot continue acquiring and analyzing the signal.  How can I start the playback from within the state machine without halting its execution?
    Solved!
    Go to Solution.

    Do you use the sound output VIs? If you do, try this. On the "Play Sound File VI" set the timeout value=0
    Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
    (Sorry no Labview "brag list" so far)

  • Storing information within a document

    Hi everyone,
    Is there a proper way to store information within a InDesign document?
    I would like my InDesign extension to be able to synchronizes data between a document, and an online database. So in order to do this I would like to store a copy of that database directly in the document most likely in an XML string.
    The reason I'd like to embed it in the document is that I want people to be able to share documents and not loose that data.
    I've looked at labels which seemed to answer this need:
    app.activeDocument.insertLabel('myData', someXML);
    But from what I've gathered around the internet, there is a size limitation of 4,854 bytes for a label. While it might be enough for most cases I can easily see the XML being too big.
    Is there another way of storing data within a document?
    Or do you see another approach to this problem?
    Thanks in advance for your help.
    -- Bastien

    Yes, a lot of data!
    It's interesting that you can write even more (I wrote about 1 Mb),
    but everything over 4,854 is flushed during the save.
    http://indisnip.wordpress.com/2010/07/31/saving-script-data-within-document/#comment-511
    Marijan (tomaxxi)

  • When i share a contact from my iphone and sent it to any other iphone the information within the notes tab displays in correctly

    When i share a contact from my iphone and sent it to any other iphone the information within the notes tab displays incorrectly,
    .I usually use this tab for doctors and allergies

    I just attempted the share myself with a contact and found it did not transmit the notes field either. I've only used this method for sharing maybe twice since I've had my iPhones. I don't remember if it ever worked before, and then I wouldn't know why it wouldn't. Sorry I couldn't help any more than that.

  • Where could i find information about the state of my request to change my ipod nano 1st gen?

    my ipod 1st gen is part of the program of replacement, but i dont know where i can find information about the state of my request. some ideas?   

    You can enter the Serial Number and Repair ID on this page to get a stsus update:
    https://selfsolve.apple.com/repairstatus/main.do;jsessionid=0phLTksW2mwLbyQVF3Qs zFtCQMH2Jv5xkMxvMlD6RsKVLhpJjpjj!846893301
    Hope that helps!

  • Hi, i have an ipad air. Last night i got an email from apple@staff.aruba.it, asking me to update my apple account information within 72 hours, failing which my account access will be restrictes. Is this a genuine email? Thanks

    Hi, i have an ipad air. Last night i got an email from [email protected], asking me to update my apple account information within 72 hours, failing which my account access will be restrictes. Is this a genuine email? Thanks

    It is a phishing attempt to get your personal infomation.
    Do not reply and delete the email.

  • AND within IF statement in XML publisher

    Hi All,
    I am in need to use AND condition within an IF statement in rtf template.
    Here is the condition I am using
    <if:../../DIST_SHIPMENT_COUNT!=1 AND ../../ADDRESS_DETAILS/ADDRESS_DETAILS_ROW/LOCATION_ID!=SHIP_TO_LOCATION_ID?>
    My data
    <?end if?>
    This is not working, does anybody know how to achieve this.
    Appreciate your time and help.
    Thanks,
    Ragul

    so you mean to say
    ../../DIST_SHIPMENT_COUNT!=1 AND ../../ADDRESS_DETAILS/ADDRESS_DETAILS_ROW/LOCATION_ID!=SHIP_TO_LOCATION_ID
    and
    DIST_SHIPMENT_COUNT!=1 and LOCATION_ID!=SHIP_TO_LOCATION_ID
    conditions are different?
    exactly
    I have always refered to data elements in the RTF without giving any path and it works fine for me. is there anything that I may be missing?
    so you may be have simple case or may be not need to use parent tags logic
    so crazy example
    <ROWSET>
        <G2>
            <DIST_SHIPMENT_COUNT>0</DIST_SHIPMENT_COUNT>
            <ADDRESS_DETAILS>
                <ADDRESS_DETAILS_ROW>
                    <LOCATION_ID>2</LOCATION_ID>
                </ADDRESS_DETAILS_ROW>
            </ADDRESS_DETAILS>
            <G1>
                <ROW>
                    <SOMEROW>some text 1</SOMEROW>
                    <DIST_SHIPMENT_COUNT>1</DIST_SHIPMENT_COUNT>
                    <LOCATION_ID>3</LOCATION_ID>
                    <SHIP_TO_LOCATION_ID>3</SHIP_TO_LOCATION_ID>
                </ROW>
                <ROW>
                    <SOMEROW>some text 2</SOMEROW>
                    <DIST_SHIPMENT_COUNT>1</DIST_SHIPMENT_COUNT>
                    <LOCATION_ID>3</LOCATION_ID>
                    <SHIP_TO_LOCATION_ID>3</SHIP_TO_LOCATION_ID>
                </ROW>
            </G1>
        </G2>
    </ROWSET>
    and
    original condition:
    <?for-each:ROW?><?position()?> and value <?if: ../../DIST_SHIPMENT_COUNT!=1 and ../../ADDRESS_DETAILS/ADDRESS_DETAILS_ROW/LOCATION_ID!=SHIP_TO_LOCATION_ID?><?SOMEROW?><?end if?><?end for-each?>
    your condition:
    <?for-each:ROW?><?position()?> and value <?if: DIST_SHIPMENT_COUNT!=1 and LOCATION_ID!=SHIP_TO_LOCATION_ID?><?SOMEROW?><?end if?><?end for-each?>
    and result as
    original condition:
    1 and value
    some text 1
    2 and value
    some text 2
    your condition:
    1 and value
    2 and value

  • Retrieve Specific Mapping Error Information Within BPM Flow.

    I have an Integration Process which executes a message mapping step prior to further processing. When the message mapping receives an error there is an exception branch
    within the process that will send an email using the Mail Receiver Adapter. The mail message prototcol is XIALL which sends the payload and soap envelope.
    However, I need to retrieve the actual error returned from the mapping step and forward that specific information to the originator of the failed message as an email.
    I know we can use the alert functions to send alerts, but my requirement is to send the actual error via email to our external vendors / customers.
    Has anyone had success doing this?

    Hi, have you got it done? Please share!
    Thanks,
    Karthik

  • Function within SELECT statement

    Help please...
    How can I get the my custom RFCal function to work within
    this select statement??
    My Error:
    The value SUM((a2.act_rate + a2.act_gratuity) *
    ap2.actpac_quantity) cannot be converted to a number.
    My Code:
    SELECT outer select blah blah,
    (SELECT #RFCal("SUM((a2.act_rate + a2.act_gratuity) *
    ap2.actpac_quantity)" + p2.pac_serviceFee, p2.pac_occupancy)#
    FROM tablep2 p2 INNER JOIN tableap2 ap2 ON p2.pac_id =
    ap2.pac_id
    INNER JOIN tablea2 a2 ON ap2.act_id = a2.act_id
    WHERE p2.pac_id = p.pac_id) AS myTotal
    FROM tablep p INNER JOIN tableap ap ON p.pac_id = ap.pac_id
    INNER JOIN tablea a ON ap2.act_id = a.act_id
    WHERE outer select blah blah

    Thanks for responding Dan.
    Your option of running the function on the result via a
    cfloop is what I am currently doing... problem is I want to be able
    to sort the function result. So with that, what would be the
    simplest method?
    I will test running an additional query of queries on the
    result.

  • Fetching information within the given date range

    Hello All,
    PLease can u help me in solving this : --
    I need to fetch those employees who will complete 18 yrs within the date range specified.
    For example, if date1 = 10/21/2008 and date2 = 11/03/2008
    then i need to display information of all those employees whose birthday fall within the date range along with the date.
    Thanks in advance !

    Hi,
    16:58:25 b1>desc test1
    Name                                      Null?    Type
    AGE                                                NUMBER
    BDATE                                              DATE
    16:58:36 b1>SELECT * FROM test1
    16:58:47   2  ;
           AGE BDATE
            18 23-OCT-08
            17 23-NOV-08
    16:58:48 b1>SELECT *
    16:58:55   2  FROM test1
    16:58:55   3  WHERE  Bdate BETWEEN  TO_DATE('21/10/2008','DD/MM/YYYY')  AND  TO_
    DATE('30/10/2008','DD/MM/YYYY');
           AGE BDATE
            18 23-OCT-08- Pavan Kumar N

Maybe you are looking for