Drag and Drop Template
Does anyone know where I could find a Flash drag and drop
template where the drag objects snap to the drop locations, and the
check answers button has this functionality each time it's clicked:
- Displays how many answers are correct and incorrect
- Snaps the incorrect drag objects back to their original
positions
- Makes the correct drag objects immovable
- Displays something like "These are all correct" message
when all are done correctly
I also need the drag and drop to work inside of a movie clip.
I've found a number of drag and drop templates, but none of
them can do all of these things. My ActionScript programming is
basic to intermediate at best, so I can't program it from scratch.
Thanks!
the errors following the first are probably a result of the
syntax error in line 5, calls to _root are somewhat unstable, and
can often get unexpected results, in this case I think I'd go with
_parent or _level0, where I'm assuming the array is located.
Additionally, I don't think that the operator 'add' can be
used as a 'concatenator', but I think you should check the array
anyway, instead of all instances within the 'root' MC properties
list.
PS. this will only check the target array once, when the MC
is press the first time, if you are going to drag the MC to a
target point and then determine if it's being hit you should place
this in the on(release) handler where it's activate when stopDrag
occurs. If you want it to continuously make the check while being
dragged, you should place it inside a repeating loop.
something more like this:
Similar Messages
-
Flash Drag and Drop Template in Captivate. *HELP*
Good morning.
I am attempting to use the drag and drop learning interaction
that comes pre-packaged with Flash CS3 and import it into Captivate
for use in a Captivate based e-learning exercise.
I create the drag and drop just fine in Flash, and it looks
perfect when I publish it in Flash, etc.
When I attempt to use the EXACT same SWF in Captivate,
however, it does not work. I can move the drags around the screen,
but they will not "drop" where they are supposed to.
Thinking maybe I broke the template, I went ahead and just
imported it 100% unchanged from Flash into Captivate (without me
messing around with it changing things around) and it does the
exact same thing.
I have successfully used my own homemade flash "widgets" in
Captivate, to include like click and reveal type interactions...for
whatever reason, though, I can't get this one to work, even though
I know it works perfectly in Flash.
The .swf file was developed using ActionScript 2.0 in Flash
and I tried publishing it with Flash 9 and Flash 8 as the setting,
both do the same thing.
Help!!!?
Thanks.
RobHi R
Note that the Border simply adds space to the project so the
playback controls aren't covering part of your movie. Assuming you
want that to continue AND have a playback control, you might resize
the project so the playback control is included in the main movie
as well as being placed in an area that doesn't possibly obscure
any screen activity.
Cheers... Rick -
Designing a Drag-and-Drop Template using InDesign
Hi,
Please forgive my naivity here - I have just been handed a project for which I am completely unqualified, and am hoping for your help!
I need to design an advertising booklet (folded A4 - i.e. each page being A5) to go out each month. Our customers will submit their adverts to us in various formats (single slot, double slot, half page, full page, etc, etc).
My aim is to create a template for this so that, each month, I just need to drag and drop the adverts as they arrive, into set fields on the page, so that I don't have to worry about page layout, bleeding, etc.
My boss has handed me a copy of InDesign CS5, and instructed me to see what I can do...
So, firstly: is it possible to do what I'm trying to do?
If not, what would your collective minds suggest is the best idea?
If so, how do I do it? Are there tutorials online that I can follow through? If not, can someone instruct me on how to get started?
Your assistance is appreciated!
AJFirst place to start with InDesign is this book: http://amzn.to/biUyIZ
You can also check out Lynda.com. For $25/month you can't beat it.
That said, yes, what you want to do can be done by creating a template, but you'll need to give your clients very specific instructions on how to create the PDFs that you'll want to drop into your book.
One last suggestion, have a talk your boss about expectations. Buying InDesign doesn't make you a designer and more than going to Home Depot and buying tools will make you a carpenter. Learning ID will take some time.
FWIW, I do offer remote training sessions, if you boss is so inclined to pay for it. You can find my contact info on my website, www.theindesignguy.com
HTH,
Bob -
OK - Here's my problem. Just moving from AS2 to AS3 and
trying to create a drag and drop template. I need to re-use a
single drag selection multiple times, to multiple targets and then
graded. For example, say I was building a car by dragging parts
over to a car frame. I need to be able to drag a copy of a tire to
the car frame 4 times in any random order. Drag 2 doors in any
order, or drag one item like a hood... etc, then grade to make sure
all are in the right place.
I have succedded in dragging a specific Drag item to a
specific Target and give feedback as it is dropped (either "wrong",
"correct" or "Good Job, Completed"), but having a bear of a time
trying to figure out how to use one Drag item for multiple Targets.
Anybody have a sample template FLA of the same concept that I
can build from?
Many, Many, Thanks!What I am trying to do is to be able to use one of each of
the images on the left multiple times, and put them in the correct
position on the diagram in any order and then checked after student
drops the item on a target. (sample sent to email)
I have 1 for 1 working (working targets have green
highlight), but can’t figure out how for instance, drag 2
barrels in any order, 6 red squares over in any order and 2 orange
circles over in any random order. I am stuck on 1 drag item for one
specific target only.
I would like the selections to remain to the left and copies
of them created and dragged to the targets. (currently they are
removed from the left when dragged) -
Can i make a book in iPhoto without using any of the built in layout templates, which are too limiting when i have already cropped my pictures to show just what I want. Ideally I just want to drag and drop and arrange and size the pictures myself
If you have Pages you can create customs pages for your book as TD suggested. If you have Pages from iWork 09 or 11 this app will add 80 or so additional frames to those offered: Frames and Strokes Installer. Don't use it on the latest Pages version, however.
This tutorial shows how to create a custom page with the theme's background: iP11 - Creating a Custom Page, with the Theme's Background for an iPhoto Book. Once the page is complete to get it into iPhoto as a jpeg file follow these steps:
Here's how to get any file into iPhoto as a jpeg file:
1 - open the file in any application that will open it.
2 - type Command+P to start the print process.
3 - click on the PDF button and select "Save PDF to iPhoto".
NOTE: If you don't have any of those options go to Toad's Cellar and download these two files:
Save PDF to iPhoto 200 DPI.workflow.zip
Save PDF to iPhoto 300 DPI.workflow.zip
Unzip the files and place in the HD/Library/PDF Services folder and reboot.
4 - select either of the files above (300 dip is used for photos to be included in a book that will be ordered).
5 - in the window that comes up enter an album name or select an existing album and hit the Continue button.
That will create a 200 or 300 dpi jpeg file of the item being printed and import it into iPhoto. For books to be printed choose 300 dpi. -
Drag and drop option for hierarchy through Web Template
Hi All,
I have 2 hierarchies in one report. For example Product Hierarchy and Customer hierarchy. I would like to have an option in query where I can select the node from each hierarchy and the report is displayed only for the selected node/nodes. I am using Web Template. I used "Hierarchy filter" web item and was able to achieve this. But I would like to have a drag and drop option.
I mean when I use Hierarchy filter web item, I have to select the particular node in the hierarchy. and then the report (Web Item - Table) is displayed based on the selection. But I would like to drag the node from the hierarchy and drop it to the report (Web Item - Table) and the report is displayed for the selected hierarchy node.
Is this possible? How? Do I have to write any Java code or we can achieve this with BI Standard functionality.
Regards.
Parin Gandhi.This is not possible using Standard BI web functionality.
If you are an expert with JavaScript and BI Web APIs you can probably write JS code to do this. -
Drag and Drop Interaction in Quiz Template
I'm new to developing in flash, and I'm just teaching myself.
I've been a software developer for 15 years. I'm trying to use the
quiz template in flash and having trouble with the drag & drop
interaction. It seems to work fine when not randomized, but ever
since I selected randomize, when one of the drag/drop interactions
come up, the screen does not reset for the next question. The
controls of the drag/drop frame are overlay the next frame. Is
there a way to fix this? I was searching through the posts prior to
posting this message, and I found a similar problem posted, but it
is a year old and there were no helpful responses. Can someone
help?I haven't done Drag and Drop before, but make sure you have the action on the submit button and not on the slide itself. I think if you play with the button properties vs. the slide properties a little, you can get what you want.
Nancy -
Can you drag and drop contacts into Pages template?
Older versions of Pages allowed you to drag and drop contact information to a document or template, Can this still be done in newer versions? If so, how?
No.
Someone has created an AppleScript to merge your addresses however.
Why not just use Pages '09?
Peter -
How to drag and drop another swf or fla into a template?
I am building a flash website for a friend. We are using templates he purchased at flashden.net.
I normally use wordpress, joomla and other such systems and am familiar with html, php, cgi and such.
This is my first time dealing with a flash template.
I have downloaded the trial version of the software and he wants to purchase adobe flash professional for me
So that we can edit the template and add features he wants in the future.
The website that sells the templates says you can easily drag and drop addons to templates in flash
but I am not finding it so easy. Is there somewhere online where I can find a tutuorial on how to step by step
drag and drop flash files into another template etc.?
Also, where can I find good tutorials in general? I have downloaded adobe flash for dummies it is not as indepth as I need
to get a handle on this software.
Thank you to anyone that offers me any advice,
David DohertyNed,
Thank you for responding.
Flashden.net does claim its a simple drag and drop operation to do this but they have little to know information on the site about the subject and
having difficulty with the sellers on step by step instructions. They claim it's easy it may be.
The person I am building the website for had a bad experience with one of the sellers who refused to offer anything but basic instructions and claimed the cost of the software was not worth his time.
Here are the instructions that were provided:
Open news_rotator.fla
Go to library.
Select and copy NewsRotator movie clip.
Paste it into your own project’s library.
Now, you can drag and drop it into your own movie clips.
Use news.xml to add/remove headlines.
As you can see from what your telling me this is insufficent information on how to drag and drop this flash into another flash template.
I will attempt to contact other selers at flashden for information as I have other flash templates we have purchased.
Thank you,
David Doherty -
Drag and drop flash template in Captivate
Hi,
I'm having troubles inserting drag and drop exercises, generated through a Flash template, into Captivate as a swf. They sometimes work but the result is very instable. Here are two examples with the exact swf : one works fine and the other one doesn't display the buttons. The only difference is a blank slide in the second one...
Has anyone tried this before have any idea?Michael
Thanks for taking the time to check out the files.
Here's the problem : example 1 shows OK, the buttons are visible and active. These two top buttons (circled in red) are from the embedded swf file, whereas the third one in the bottom was created in Captivate. They have the same look and feel sothat users won't notice the difference.
Now, in example 2, these buttons from the swf file don't show. The Captivate button works fine.
The two swf files are basically clones, nothing has been altered exept for sounds and images. The code is from the Test template that comes with Flash. They work perfectly fine while played alone, but have this behavior where embedded in Captivate.
I have the exact same problem whatever the way I open them (Flash player, Firefox or IE 7), and my Flash player is up to date. Both the swf and the cp are AS 2. -
Multi-row "Drag and Drop" works for some users, not others
Background: We are working on Win7 SP1 clients, Project Prof. 2010, SP2
A couple of users have reported that they cannot move ("drag") multiple selected rows in a task sheet, only a single row at a time. Other MS Project users around them (and myself) can move multiple rows with the "Drag"
feature. "Drag and Drop" is selected in the "Options/Advanced" section of both their local global template and the Enterprise Global.
To my knowledge, the multiple row selections contain no collapsed summary tasks, in case that might be an issue.
I'm suspecting some Windows setting is amiss on the offending clients, but wanted to see if anyone else had seen this behavior before in Project Prof. 2010.
Thanks!
JTC
JAckson T. Cole, PMP, MCITPThanks for the response, Shiva!
User community is on MS Project 2010 (14.0.7011.1000) SP2, MSO (14.0.7128.1000)
To reproduce the problem, MS Project user will select multiple task rows by selecting first row, then holding MB1, and "sliding" to the last row desired. The problem manifests itself by NOT turning the cursor into the "four-arrow cross"
after selection is accomplished. If only one row is selected, the ability to move that row alone is available.
Again, only a couple of users (that have called me!) are seeing it. Their officemates are not having an issue.
FYI ...
JTC
JAckson T. Cole, PMP, MCITP -
Problem with Drag and drop in panel dashboard
Hi
I am having problem with drag and drop in panel dashboard.
I will explain what i am doing.
I am using Oracle three column template in First region i am having a table that showing all customer.
I drag one record from my table and drop it on customer info (CIF) page on second region it is working fine.
my CIF page has a dashboard with 6 panel box. i am showing 6 different jsff in 6 panel box.
I put drop target in each jsff
<af:dropTarget dropListener="#{backingBeanScope.backing_customerinformation.handleItemDrop}"
actions="COPY">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="CustomerSearchDnD"/>
</af:dropTarget>
when i put drop target my panel boxes moves only when i drag it to another panel box header not entire part of panel box.
if i remove the drop target then panel box move normally as the example given on: [http://adfui.us.oracle.com:7778/faces-trunk/faces/visualDesigns/dashboard.jspx?_afrLoop=2021391022520156&_afrWindowMode=0&_afrWindowId=null] but in taht case i am not able to drag and drop my dataYou must be an Oracle employee as you're referring to a component in the upcoming JDeveloper version which has yet been released to the general public. Oracle employee's are, I believe, directed to post on internal Oracle forums.
CM. -
Drag and Drop to photo page creates links, doesn't replace placeholders
I searched the discussions for quite a while and didn't find much similar to this topic. Basically, drag and drop is no longer working on my iWeb and my photo grids will not accept pictures to replace the placeholder (sample) photos. I will try to explain the whole problem in detail.
I am a new iWeb user, and I set up a page without any problems at first. Yet when I returned in iWeb to add another photo page today, I have had a lot of trouble. I used the template Photo Page and opened the Inspector and the Media Viewer to drag photos onto the placeholder photos, as the Help pages and tutorials show. Yet when I drag the picture file from the Media Viewer into the photo grid, only a small text box appears that sets up a hyperlink to the photo file on my computer. I've tried messing with the inspector, seeing what the difference is between the placeholder photos' settings and the files I'm trying to add.
The only differences I can see are: in the Link Inspector's pane I can tell the program is at first making a hyperlink to the file instead of displaying the photo (yet disabling the hyperlink doesn't change anything); also,
In the Graphic Inspector pane that appears when I have selected a general area in the photo grid, at the top the "Style" , "Layout" and "Caption" options appear, along with a display of a sample photo style. When I click on one of the rectangles that appears with the file I am trying to drag and drop, I have only the "fill" option, which has "none" selected. Fiddling with the options does not get the photo to appear.
I can see the blue grid surrounding the placeholder photos, so the photo grid exists. I have also tried using different templates' photo pages, but they all have the same problem. I also tried creating an album in iPhoto and importing it to iWeb, but only two photos appeared out of 12.
So the main part of my problem is not that photos don't appear at all (if I try and insert them they appear on their own, completely independant of the template's style and the photo grid)., it is that they do not work with the photo grid and that drag-and-drop no longer works.
Any information that could help is greatly appreciated.
SueSusan,
Try out the following things. These suggestions are
sort of the starting point for non-specific strange
behavior in iWeb.
1. Delete iWeb preference file at:
YourHardDrive/Users/yourname/Users/Library/Preferences
/"com.apple.iWeb.plist"
2. Delete iLife Media Browser preference file at:
YourHardDrive/Library/Preferences/"com.apple.iLifeMedi
aBrowser.plist"
3. Repair startup disk permissions using Disk
Utility
4. Reboot machine
5. Delete iWeb application (but keep a backup of the
Domain file!) and reinstall iWeb 1.0 from original
iLife'06 DVD or Recovery Disks and then update
directly to 1.1.1 via Software Update.
These are the top 5 things that seem to garner some
kind of positive results from people having similar
problems.
I am having the same problem Susan described. I've tried #1 and #2 from the above recommendations and still have the same problem of photos not opening in the photo page after dragging them from iphoto. I, too, published a site (not on .Mac, but I don't know if that matters) and now want to add a photo page. Also, the template shows six placeholders, but when I select the photo page only three appear.
Hope you can help. Thank you. -
UltraBeat Drag and Drop Samples (once and for all)
Hello I have searched through this and other forums for this one.
I know someone can come through here... I have tried every which way
of draging and droping aiff, wav, and mp3 samples into the Ultrabeat
in the Drag ad Drop template provided.
No Dice. I have no idea what is going on with this hoping someone can spell
this one out - I think it will read by thousands...
.::=::.Ok 2 discoveries for any one else reading this thread for help.
I found;
1. The Load Sample window is in the lower left hand corner of the Ultrabeat window.
2. That is where you find the load and unload sample menu
Question I have;
I can load a sample here from out side of logic ie any sample from the browser
BUT cannot load from the Apple Loops menu this is part of what may have thrown me off any info on this?
Also, there seems to be no edit/undo function in ultrabeat can some one confirm this?
Thanks to you guys and some pokin around I am on my way...
getting there. if any one has anyhing to add about ultra beat feel free to
post a link here or add it in maybe we can create a nice thread for other people like me :)-(: -
Hi,
Is there any way to enable drag & drop between ContentItem components in the Page Builder interface without having to do custom Flex programming? We would like to allow the user to switch a cartridge position in a page template without having to re-select the cartridge and enter content in again.Do you mean that you want to be able to drag and drop between sections within the page, drag and drop within the same section, or drag and drop across to a different page?
Maybe you are looking for
-
My Mac Doesn't Show to Others on AirDrop
I have a MacBook Pro 15" Retina Display running the latest Mac OS X 10.8.3 with all the updates. My Mac is obviously supported by AirDrop as it is a current model. When I 1st got it, I used AirDrop all the time to transfer files back and forth with n
-
How do I convert an AI file to .dst format?
I made an illustration for a client and they told me that the printer can't use the AI file. They need a .dst file.
-
I have screen sharing turned on and it works fine when I'm in the house in front of the computer on the same network, but when I'm at the office trying to share the screen it is not working. I'm I doing anything wrong? I have the Macbook Pro hooked u
-
How do I link to a specific Hero Image in from another page?
How do I link to a specific Hero Image from another page?
-
How to change status in status profile at header level in background
Hi, I have customized the standard sales order screen with status profile at header level. In that, I have set the check boxes as created, delivered, approved and rejected. The requirement is, whenever the order is created through VA01, need to check