Drag & Relate between two BW reports

Hello together,
I want to implement the Drag&Relate functionality between two BW Reports via EP 6.0. I have configured the connection between Portal and BW with the report RSPOR_SETUP. The SingleSignOn and the import of business object is working well. After that, I took 2 BW testreports which were prepared for D&R. When I now drag the customernumber of report1 to the target report2, I get the error message "No relation found between the source and target business objects". The business object in both reports is 0CUSTOMER, so what relations should be set?
Where is the mistake, could anybody help me?
Thanks and regards.
Gerd Nedderhoff

Hi Gerd,
You have to link the two iviews. First double click the first iview. Then right click the second iview and make it as the target iview. Then in the navigation panel you see the other iview in the Drag and relate section.
Regards
Arun

Similar Messages

Difference in GL Balances between two Standard Report fbl3n and fagll03

Hi ,
Mismatch of balances between two standard report ie.fbl3n and fagll03 . We are giving the complete example of what we are facing right now ... please go through the examples .
ENTRY NO. 1
We have posted one MIRO , Accounting Posting is as below : -
PK         Description    Amount
86         GR/IR             1000.00
31         Vendor           -800.00
50          TDS               -200.00
ENTRY NO. 2
We have Reversed the MIRO through MR8M , Accounting Posting was as below : -
PK         Description     Amount
21         Vendor             800.00
40          TDS                 200.00
96          GR/IR            -1000.00
But in Standard report FAGLL03 , .The line items of above twoi entries under GL " TDS " are showing in this way : -
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          -200.00 -
> ?????
*OPEN ITEMS          - 400.00----
> ?????
Although in other Standard report FBL3N , the same are showing correctly as shown below
Doc No.      PK      Ammount
Entry 1       50          -200.00
Entry 2       40          +200.00
*OPEN ITEMS                0.00
PLEASE HELP
Regards
Soumitra Bhattacharya

Hi
FAGLL03 - Display/Change Items (New) - this report is related to ledger reporting purpose. this reports is available after ECC 5.0.
FBL3N - is line item display - this is only GL reports (not in ledger reporting)
if you find any difference is values please check the report variant you are using and ledger you are activated.
hope this will help you.
Regards
Ram

Define main objects for Drag & Relate between BW 3.1 and EP6

hi all.
We are trying to implement Drag & Relate between BW 3.1 and EP6.
We have 2 different BW reports based on the same object "0MATERIAL". One of them should be a source and the other is the target. When creating the iViews for these reports the "main object" property has no values, therefor we don't see any symbol near the object we want to drag. The import of the "0MATERIAL" object from BW to the portal was successful.
Is it related to customizing the BW system or the portal?
thanks,
Sagi

I solved the problem - I added the BW alias before the main object name in the main object property. For example "BW.0MATERIAL" when BW is the BW system alias and 0MATERIAL is the object name.
Sagi

Using built-in function in the definition of relation between two blocks...

Hi ,
Is it possible to define a relation between two form blocks(db based) ....
I have a master table such as:
table : strdet (cols: ms varchar2(10) , det varchar2(10))
materialized view : mv (cols : det varchar2(10) , sum_a number(5), sum_b number(5))
and data:
strdet
ms                   det
1                     1.1
1                     1.2
1.1                  1.1.1
1.1                  1.1.2
1.1.1               1.1.1.1
e.t.c.
and for the mv
det               sum_a     sum_b
1                   500        300
1.1                100        200
1.2                540        150
e.t.c.
I have tried some versions of relations so as to create a master-detail relation(in reality , the two blocks are connected via ms.det
->mv.det... but the relation is one-to-one....) . I want a result such as:
Master block
1.1
Detail Block
1.1.1
1.1.2
e.t.c.Is it possible somehow...????
Note: I use Dev6i and Dev10g ...
Thanks ,,,
Sim

I think you'll have to use a from-clause-query for the detail block. If you join the master table and the mv on the DET column then you can give each row in the detail block a MS column (from the master table) which you can use in the relation.

Can any one explain me the relation between BDC and reports events?

hi experts.....
can any one explain me the relation between BDC and reports events? we are using report events in BDC programmes why?\
Is reports events occurs in each and every concept in ABAP i.e creating custom idocs, smart forms, sap scripts, dialog programmes, module pool technics?
thanks in advance

The forums are expert forums. So the first thing I would do is change your name.
It's like entering a grand prix in a car with a "Student Driver" sign.
Rob

Create relation between two blocks which are based on different procedure

Hiii
How to create relation between two blocks which are based on different stored procedures in Oracle form??
Pradhyumn Sharma

hiii,
I selected the common key deptno in both procedure.
I created a relation between both procedure. but when i compile the form it give an error in ON-CHECK-DELETE-MASTER. My procedure are
==================================
PACKAGE emp_pkg AS
TYPE emprec IS RECORD(
empno asg_emp.empno%type,
ename asg_emp.ename%type,
job asg_emp.job%type,
sal asg_emp.sal%type,
deptno asg_emp.deptno%type);
TYPE emptab IS TABLE OF emprec INDEX BY BINARY_INTEGER;
PROCEDURE empquery(block_data IN OUT emptab, p_deptno IN NUMBER);
end;
====================================
PACKAGE dept_rec IS
type rec is record(dname asg_dept.dname%type,
loc asg_dept.loc%type,
deptno asg_dept.deptno%type);
type deptrec is table of rec index by binary_integer;
PROCEDURE dept_rec1(block1 in out deptrec);
END;
===================================
In ON-CHECK-DELETE-MASTER
CURSOR BLOCK9_cur IS
SELECT 1 FROM dept_rec.dept_rec1 d
WHERE d.DEPTNO = :BLOCK6.DEPTNO;
identifier dept_rec.dept_rec1 must be declared.
Regards
Pradhyumn

Drag&Drop between two windows

Hi
I am interested to know if in the latest version of abap webdynpro it is possible to do drag&drop between two windows?
And if it is possible to have a floating part of a window ( that I can move it around the screen )?
Thanks
Nitsan

Hi
Thank u Thomas and Chris for your helpful answers!
Still there is something I want to be sure about, the interaction that can be done between this floating window
and the opening window.
Can both window stay active and communicate between them?
Ill give an example of what I mean:
Lets say that I have window with few tables from this window I open another window with a list. now I want to dynamically
move an item from this list to one of the tables in the parent window or move an item from one of the tables to this list.
Can this scenario be implemented in abap webdynpro?
Thanks,
Nitsan

Set a relation between two or more images

Is it possible to create a relation between two or more images?
For example: We have an image in three versions (rgb, cmyk, gray). If I find one of these, I would like to klick on a button like "show correspondend images". So I can see all versions of this images we ever saved.
Any idea?
Best regards!
Roman

I don't think Lightroom handles cmyk images.
For rgb and gray, you can stack the images, or make the gray from a virtual copy of the rgb. In this way, simply unstacking the images results in your requested "show corresponding images".

How to remove white space between two answer reports

How to remove white space between two answer reports
In Dashboard section I have 2 rqeuest. Each request renders Table View. When I display dashboard, it show white space separating the 2 table views. How do I get rid of the white space/white band ?

See this link
Re: Eliminating the space between two reports in OBIEE dashboard page Section
Regards,
Sandeep

How to check relation between two tables in same database

How to check relation between two tables in same database using Oracle SQL developer. Version 2.1.1.64

Hi,
Try this,
SELECT   cons.owner AS child_owner, cons.table_name AS child_table,
         cons.constraint_name constaint_name,
         cons.constraint_type constraint_type, col.owner parent_owner,
         col.table_name parent_table, col.column_name column_name
    FROM dba_cons_columns col, dba_constraints cons
   WHERE cons.r_owner = col.owner
     AND cons.r_constraint_name = col.constraint_name
     AND col.owner = 'MY_USER'
ORDER BY child_table;Thanks,
Shankar

How to create an relation between two block

Oracle forms 6i
Hai All
I have created a form in that i have four button ADD, QUERY, SAVE ,EXIT.
I have two block named Leader and members.
Four fields in leader block namely name , codeno, deptcode, unitid.
When i pressed query button and the cursor goes to name field in leader when i enter the name of leader and click
enter i gives the codeno, deptcode and unitid of the leader_name.
so now i have created another block in tabular structure to bring the members in the same deptcode that belongs to Leader_name.
So pls tell me the steps how to create the relation between these two blocks.
when i enter the leader_name and gives enter it needs to bring the codeno, deptcode, unitid and
I also need to gives the members in that deptcode..
Thanks In Advance
Srikkanth.M

If it is possible to create relationship with one table No.
Or
I have created a pre-Query in the detali block and my code is
set_block_property ('block_name', default_where, 'deptcode = (select deptcode from emplmaster where name like :block_in_which_leader_name.leader_name_field');BTW no need of joining here it can be solve by set the block's where clause as u said in ur earlier post above. Just changing the little bit this statement and then try.
If numeric
set_block_property ('block_name', default_where, 'deptcode = '||:block_in_which_leader_name.leader_name_field);
Otherwire
set_block_property ('block_name', default_where, 'deptcode = '''||:block_in_which_leader_name.leader_name_field||'''');-Ammad

Creating a Relation between two Blocks - the Join Condition [SOLVED]

Hi. I'm trying to create a Relation between my TTMS_Audit table and my Bundle_Exceptions table. This is the join condition:
ttms_audit.primary_key_values = bundle_exceptions.project_cd||','||bundle_exceptions.bundle||','||bundle_exceptions.exception_cd
And I get the following error:
FRM-15004: Error while parsing join condition
Does anyone know if my concatenated values in the Join Condition are allowed? Can I even do this? Is there a logical work around?

Got it.
I first created the concatenated values as a non-base table item on my form:
:NBT_PRIMARY_KEY_VALUES := :bundle_exceptions.project_cd||','||:bundle_exceptions.bundle||','||:bundle_exceptions.exception_cd;
Then my join condition simply became:
ttms_audit.primary_key_values = bundle_exceptions.nbt_primary_key_values

Relation between two View

Hello,
I have many blocks that based on some views. first every thing is ok when i insert record on them, but when i do an execute query i'm able to navigate between blocks in on way like (next, next) but when do previous i missed the sync between the blocks. So i decided to make some relations between these blocks. i have a main block that i take for my master and i constructed the relations master-details between my main block and others.
now when i run form i received that error ''FRM-30415 the details block of the relation is a control block'', and it give me the relation's name. I have to mention that the QUERY_DATA_SOURCE_NAME is from clause for every blocks.
as i said the blocks are based on views.
could someone help me?

Is the "Database Data Block" property of the detail block "Yes"?

How to implement Master - Detail relation between two table views in OBI11g

Hi Gurus,
I was able to create master- detail between table and graph.
But between two tables not.
I put the listening column on the table prompt and specified channel for the Listen to Master-Detail Events in the table properties.
But did not work.
Where is the mistake?
I"d appreciate any ideas, help!
Thanks
Laszlo

Thanks for the link!
My question is :
Are the same thinga the page edge and table prompt for the tables?
If not how to add a column to the page edge (not to the table prompt)?
Thanks
Laszlo

Relate between two tables in ALV REPORT(SAP-ABAP)

Hi Friends,
 I want to retrieve name1 and city1 from kna1 , and kunrg from vbrk.
 Could u pls tell me on what basis i should pick these value ?
Thx and Regds,
Bapi

Hi
tables: kna1
select single KUNNR name1 ort01 from kna1 where kunnr = vbrk-kunrg.
or
select single KUNNR name1 ort01 from kna1 where kunnr = vbrk-kunag.
write: / kna1-kunnr, kna1-name1, kna1-ort01.

link between tables is
VBRK-KUNAG = KNA1-KUNNR (customer/Sold to party)
Reward points for useful Answers
Regards
Anji
Message was edited by:
 Anji Reddy Vangala

Drag & Relate between two BW reports

Similar Messages

Maybe you are looking for