Dreamweaver CS3 Hidden Template Help
Hello I am new to these forums and would appreciate any help I can get. Ok here's the issue.
I'm using Dreamweaver CS3 to work on a website that was created from a template. Everything was going fine until I did something and now the template doesn't display in the design view of dreamweaver. It will render perfectly fine in the browser, and when i pull up the corresponding .dwt file the layout is there. I can still see my editable regions and the content within. It just won't display in dreamweavers design view of the page that it is linked to.I'm sure i just unchecked some list item that displays this I'm just not sure where or how I did it.
Please let me know if you need me to post any of my code etc. Thank you for your time and help it is much appreciated.
Thank you, JRED
JRED85 wrote:
Ok so in the end I shutdown Dreamweaver and restarted it and it fixed my problem.
Computers and computer programs occasionally get tired/confused, just like humans. Closing down and restarting often does the trick.
Since you're new here, you might take a few moments to look at the Dreamweaver FAQ. The answers to some of the most common problems can be found there.
Similar Messages
-
Dreamweaver CS3 errors Need Help!
In Dreamweaver CS3 I keep getting error messages like
"EffectAppearFade", "_beforeSave.htm is not defined" when I close
the document, When I try to add a table it says I need to turn on
invisibles even though it's already on. I also can't preview it in
a browser either. All of these things just started up one day and
continue to pleage me. your help would be much appreciated.See if this helps:
http://www.adobe.com/go/tn_19105
Ken Ford
Fordwebs, LLC
Adobe Community Expert - Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
http://www.fordwebs.com
http://www.cfnoob.com
"Mon_G" <[email protected]> wrote in message
news:gg1gvo$8gf$[email protected]..
> In Dreamweaver CS3 I keep getting error messages like
"EffectAppearFade",
> "_beforeSave.htm is not defined" when I close the
document, When I try to add a
> table it says I need to turn on invisibles even though
it's already on. I also
> can't preview it in a browser either. All of these
things just started up one
> day and continue to pleage me. your help would be much
appreciated.
> -
Dreamweaver CS3: One Template, Multiple Sites
We have about 40 sites with the same basic layout, but it's
always a hassle to update the templates because we have to do it 40
times! Is there any possible way to use the same template for
multiple sites so that updates will be much easier? We are just
using regular HTML pages, nothing in PHP or the like.Trying to apply a template site-wide would be a catastrophe -
that's
probably why there isn't an extension to do it....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Joris van Lier" <[email protected]> wrote in message
news:facc5t$r2k$[email protected]..
> "novavision" <[email protected]> wrote
in message
> news:fac4ca$i6e$[email protected]..
>> We have about 40 sites with the same basic layout,
but it's always a
>> hassle to
>> update the templates because we have to do it 40
times! Is there any
>> possible
>> way to use the same template for multiple sites so
that updates will be
>> much
>> easier? We are just using regular HTML pages,
nothing in PHP or the like.
>>
>
> One solution to this problem is to create some
serverside code that parses
> the output of a templated page, extracts the content of
editable regions
> end reinserts those into another template before
outputting to the client,
> I have some php code for that which could be run outside
of a webserver
> environment, let me know if interested and I'll look it
up for you.
>
> But since you mentioned you don't use any serverside
code your best option
> would be an "apply template site-wide extension", I've
seen one of those
> in the Dreamweaver 4 era, but a quick google only
returned this tutorial:
>
> Batch Apply Template!
>
http://www.dreamweavermx-templates.com/tutorials/tutbatch.cfm
>
>
> Hope this helps
> Joris -
How do you add text to an image in dreamweaver cs3?
does anyone know how to add text to an image in dreamweaver cs3? someone help me im stuck
Hello,
pardon, your question is still formulated in too general manner, for me at least, because there are several possibilities for these things. Please take a look on Nancy O.'s templates and tutorials, for example here:
http://alt-web.com/TEMPLATES/CSS-Semi-liq-photo-sheet.shtml
http://alt-web.com/TEMPLATES/Dark-Grid-II.shtml
http://alt-web.com/DEMOS/CSS-Clickable-Table-Cells.shtml and not to forget:
http://alt-web.com/DEMOS/CSS-Sold-Out-Text-over-image.shtml
you will come away with many ideas and suggestions about adding text to an image.
Wish you a joyful "poking around"!
Hans-Günter -
PLEASE HELP - Problem with 2 column fixed template in Dreamweaver CS3
I am trying to create a website using the 2 column fixed, right sidebar, header and footer html template in Dreamweaver CS3. I tried putting a picture in the right side bar as well as with in the main content or left portion of the page, and neither picture is showing up when I view it in any of the browsers I'm using.
I've made some minor changes in colors and sizing, but other than that no other changes. The pic I put in for the header is showing up just fine though.
Any help or advice to solve this issue would be greatly appreciated.
Thanks!!Here is the base Dreamweaver code including the pic references that I'm trying to show on either side - when the browser opens, it only shows a blank space where the pics should be... let me know what you think. Thanks!!
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/AL TemplateNEW.dwt" codeOutsideHTMLIsLocked="false" -->
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<!-- InstanceBeginEditable name="doctitle" -->
<title>Temp Home</title>
<!-- InstanceEndEditable -->
<!-- InstanceBeginEditable name="head" -->
<!-- InstanceEndEditable -->
<style type="text/css">
<!--
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #666666;
margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
padding: 0;
text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
color: #000000;
.twoColFixRtHdr #container {
width: 780px; /* using 20px less than a full 800px width allows for browser chrome and avoids a horizontal scroll bar */
background: #FFFFFF;
margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */
border: 1px solid #000000;
text-align: left; /* this overrides the text-align: center on the body element. */
.twoColFixRtHdr #header {
background: #DDDDDD;
padding: 0 10px 0 20px; /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
.twoColFixRtHdr #header h1 {
margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
.twoColFixRtHdr #sidebar1 {
float: right; /* since this element is floated, a width must be given */
width: 200px; /* the actual width of this div, in standards-compliant browsers, or standards mode in Internet Explorer will include the padding and border in addition to the width */
background: #EBEBEB; /* the background color will be displayed for the length of the content in the column, but no further */
padding: 15px 10px;
.twoColFixRtHdr #mainContent {
margin: 0 250px 0 0; /* the right margin on this div element creates the column down the right side of the page - no matter how much content the sidebar1 div contains, the column space will remain. You can remove this margin if you want the #mainContent div's text to fill the #sidebar1 space when the content in #sidebar1 ends. */
padding: 0 20px; /* remember that padding is the space inside the div box and margin is the space outside the div box */
.twoColFixRtHdr #footer {
padding: 0 10px 0 20px; /* this padding matches the left alignment of the elements in the divs that appear above it. */
background:#DDDDDD;
.twoColFixRtHdr #footer p {
margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page */
float: left;
margin-right: 8px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
-->
</style><!--[if IE 5]>
<style type="text/css">
/* place css box model fixes for IE 5* in this conditional comment */
.twoColFixRtHdr #sidebar1 { width: 220px; }
</style>
<![endif]--><!--[if IE]>
<style type="text/css">
/* place css fixes for all versions of IE in this conditional comment */
.twoColFixRtHdr #sidebar1 { padding-top: 30px; }
.twoColFixRtHdr #mainContent { zoom: 1; }
/* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
</style>
<![endif]--></head>
<body class="twoColFixRtHdr">
<div id="container">
<div id="header">
<h1>Header</h1>
<!-- end #header --></div>
<div id="sidebar1">
<h3>Sidebar1 Content</h3>
<!-- InstanceBeginEditable name="RightSideBar" -->
<p>Right Side Bar Content - - - </p>
<p>Inserted pic below here</p>
<p><img src="/images/Syntergy5.jpg" width="123" height="105" /></p>
<p>The background color on this div will only show for the length of the content. If you'd like a dividing line instead, place a border on the right side of the #mainContent div if it will always contain more content. </p>
<p>Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
<!-- InstanceEndEditable -->
<p> </p>
<!-- end #sidebar1 --></div>
<div id="mainContent">
<h1> Main Content </h1>
<!-- InstanceBeginEditable name="MainContent" -->
<p>Main Content - - </p>
<p>inserted pic below here:</p>
<p><img src="/images/Kelly1.jpg" width="285" height="236" /></p>
<p> </p>
<p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam, justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at, odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id, libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh. Donec nec libero. </p>
<!-- InstanceEndEditable -->
<p>
<!-- end #mainContent -->
</p>
</div>
<!-- This clearing element should immediately follow the #mainContent div in order to force the #container div to contain all child floats --><br class="clearfloat" />
<div id="footer">
<p>Footer</p>
<!-- end #footer --></div>
<!-- end #container --></div>
</body>
<!-- InstanceEnd --></html> -
How do I create a guestbook in Dreamweaver CS3, Plz Help....
Hi I want to create a guestbook in dreamweaver cs3 my website is www.freewebzs.com
Also it would be brilliant if you guys could help me and recommend me background colours, is there a free website I can get background colours from?
And also what fonts and colours are most popular for websites.
Im new to dreamweaver as ive just started using it so any advice would be great, thanksI have to agree with David, if you are new to DW, then creating a guest book will be difficult for you. However, you don't have to re-invent the wheel, there are many guestbook scripts available to save you the time and certainly the headaches :-)
Take a look here for a selection: http://php.resourceindex.com/Complete_Scripts/Guestbooks/
As for colours kuler is good, but you can also look at;
These palettes may help:
http://www.colourlovers.com/palettes/search?hsv=&sortType=rank&sortBy=asc&query= spring&hex=&lover=&hueOption0=&hueOption1=&hueOption2=&publishedBeginDate=12%2F2 7%2F2004&publishedEndDate=04%2F12%2F2009&x=26&y=17
More colour schemes here:
http://www.colorschemer.com/schemes/
For fonts, you are better staying with web-safe fonts that will ensure cross browser compatibility:
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap -
Viewing new template in dreamweaver cs3 reverst to front page ??
When i save a new template in Dreamweaver CS3 and then try to preview in IExploer it asks me "do you wnat to open or save this file? when i select either it reverst to my old MS Front Page editor
From their website:
" Adobe Flash (version 8 or higher) is required to edit the
FLA file.
- Use the source codes at your own risk after downloading and
flashmo.com is
not responsible for any bugs or errors caused by
ActionScripts."
Do you own Flash? Are you familliar with action scripts? If
not, then you
probably want to start with a plain html template and learn
how to code html
and CSS. Flash sites look nice but they are not friendly for
Search Engines
or users who don't have flash player installed on their
system.
Here are some on-line tutorials to help you get started with
html and CSS
code:
www.w3schools.com (free)
www.Lynda.com (pay videos)
Adobe help - "Getting Started"
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"jdbcmcbride" <[email protected]> wrote in
message
news:ftr2vf$i4q$[email protected]..
> I am a first-time user of DreamWeaver and am currently
learning how to
build a
> website with the Adobe HTML article that they have.
However, I found a
flash
> template that I downloaded as it is exactly what I want
to use for my
website.
> My problem is, I don't know how to make it work.
>
> The template is located at
http://www.flashmo.com/home
and it is the one
on
> page 5 called "037 Wooden". If anyone can tell me what
to do to get this
to be
> my website, I would really appreciate it.
> -
Help with installing dreamweaver CS3
Hi, i just downloaded the free trial version of Dreamweaver
CS3 and i was installing it and when i did,it loaded the files then
stoped and wont go any further i dont no why"Shaka_60hp" <[email protected]> wrote in
message
news:f6086l$cfp$[email protected]..
> Neither technote works on this case
>
>
http://www.adobe.com/go/kb401401
the setup doesnt leaves an installer log
> don't know why
>
>
http://www.adobe.com/go/tn_15296
this technote is not my case because i
> installed the same file from the same source on another
PC and it works
> fine
>
> Any other idea that might help installing dreamweaver?
> Thanks
No, sorry ! Maybe another search of the technotes may reveal
further
information. Otherwise, an email to support may be the way to
go.
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/ -
Need help creating a simple form in Dreamweaver CS3!!
I'm trying to create a form in Dreamweaver CS3, and while I have the form built I'm confused as to how to make it actually function. What I'm trying to do is create a form that when the visitor clicks submit, the data is emailed to me. Can someone help me figure out how to accomplish this?
Thanks so much!Ute's answer is spot on - you need a FormMail script to process the form. Check with your host (or via the control panel) and see if they supply such a form for free.
If not, google for "formail script' and you'll find quite a few available - all free to use.
You just need to add a couple of lines to your html code, change a few things in the formmail script and the form will process. Sounds complicated but most scripts come with a help file to help you get off the ground.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.perrelink.com.au
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap -
I'm using Dreamweaver CS3. I use a template that I've always
been able to make changes and automatically update the pages that
use it on save. I've made some changes to the template, but when I
go to update all the pages using that template it says:
Done.
files examined: 1183
files updated: 0
files which could not be updated: 0
total time: (0:00:02)
Nothing is updated. I have a large site to update and am in
desperate need of help.
Thanks!!Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done). If
you *have
done this*, then recreate the child pages (in DWCS3) using
FILE | New > Page
from Template, select the template and click CREATE.
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"nee9" <[email protected]> wrote in message
news:[email protected]...
> I'm using Dreamweaver CS3. I use a template that I've
always been able to
> make
> changes and automatically update the pages that use it
on save. I've made
> some
> changes to the template, but when I go to update all the
pages using that
> template it says:
>
> Done.
> files examined: 1183
> files updated: 0
> files which could not be updated: 0
> total time: (0:00:02)
>
> Nothing is updated. I have a large site to update and am
in desperate
> need of
> help.
> Thanks!!
> -
Inserting RSS Feeds into a Dreamweaver CS3 Template
I've created a website template in Dreamweaver CS3. We need
to insert an RSS feed that will allow our web site to receive news
updates and information pertinent to our consumers needs. Please
help! I have no clue how to do this.Which version of FW? If FWMX 2004 or earlier, you would need
to read this
carefully -
http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"hraklis_1" <[email protected]> wrote in
message
news:g4p0l0$lak$[email protected]..
> I've created a dreamweaver cs3 template for my website.
I've also created
> a
> menu in fireworks which has popup menu's. If I create a
new page (not from
> a
> template) and insert the fireworks html, everything
works fine when I try
> to
> preview it.
>
> However, if I insert the fireworks html into a page
created from a
> template,
> or even the original template file, the image of the
menu is inserted and
> can
> be viewed, but the popup menu's do not appear. Any
thoughts or
> suggestions?
> -
Are dreamweaver CS3 templates responsive?
Hello,
I need to create my project that will work also in ipad and the new cellphones? I'm using Dreamweaver CS3, and already almost done with the project when I was asked to have this new parameter - the site has to be responsive to these devices. Will the template in Dreamweaver CS3 work with these devices? I don't currently have these devices to test. How could I test them. If not, any suggestions... Any help, please....
Zandy
[email protected]Unfortunately, CS3 predates the "responsive design" concept by a few years. You can still make responsive designs using it, but it requires more knowledge of handcoding the CSS/HTML. If you look into Media Queries and Responsive Design online, there are quite a few sources that give you the info you'll need. Depending on your level of comfort with CSS and HTML, they may be a great help, or a confusing mess.
http://www.lynda.com is a good resource
As for previewing things for smaller devices, Firefox has a nice little thing built in for that...
Tools > Web Developer > Responsive Design View (Ctrl + Shift + M). -
DreamWeaver CS3 Web Photo Gallery Help
I bought the Adobe Web Design package to put together a good
(hope springs eternal) Web site to showcase about 60 oil paintings
that are presently available at different poster sites. I am a
novice to DreamWeaver; started my basic web page. I now need to add
the photos in 6 different galleries - landscapes, waterscapes, etc.
I assumed I was going to do this in Photoshop CS3/Fireworks and
import it to the site I am building with DreamWeaver, but 2
problems confront me:
(1) I could not find a Photoshop CS3 photo gallery template
that allows for a text paragraph adjacent to a larger image when
clicking on thumbnails laid out on the side or the bottom of the
page, or am I wrong?
(2) It appears that Photoshop CS3 generates an independent
web page for the photo gallery - is it even possible to import a
photoshop cs3 web gallery into an existing DreamWeaver CS3 web
page?
Appreciate any info in this area. Thanks.On Tue, 11 Sep 2007 01:10:23 +0000 (UTC), "dreamcafe"
<[email protected]> wrote:
>I bought the Adobe Web Design package to put together a
good (hope springs
>eternal) Web site to showcase about 60 oil paintings that
are presently
>available at different poster sites. I am a novice to
DreamWeaver; started my
>basic web page. I now need to add the photos in 6
different galleries -
>landscapes, waterscapes, etc. I assumed I was going to do
this in Photoshop
>CS3/Fireworks and import it to the site I am building
with DreamWeaver, but 2
>problems confront me:
> (1) I could not find a Photoshop CS3 photo gallery
template that allows for a
>text paragraph adjacent to a larger image when clicking
on thumbnails laid out
>on the side or the bottom of the page, or am I wrong?
Dunno as I do not have CS3; but I've used Photoshop a lot to
generate
galleries, then I modify them. I think your main sticking
point is
that you haven't found a Photoshop gallery that is close to
what you
want, is that correct?
> (2) It appears that Photoshop CS3 generates an
independent web page for the
>photo gallery - is it even possible to import a photoshop
cs3 web gallery into
>an existing DreamWeaver CS3 web page?
What's to import? Photoshop outputs web pages and DW edits
web pages.
Edit away.
>
> Appreciate any info in this area. Thanks. -
Does anyone know how to configure Dreamweaver CS3 to show CF8
help when I hit F1 while I have a CF tag highlighted?
Thanks so much for any help.
A.J.cfmA.J.cfm wrote:
> Hey thanks didn't see the CTRL+F1 menu item (I know
'da') but that just opens
> up the livedocs.adobe.com web page and the help content
is not for the tag
> highlted in DWCS3. Is there way to make it work like it
did in Studio and
> HomeSite?
Never used CF Studio or HomeSite so I don't know how they
worked. Perhaps you can explain more about what you're actually
like to have happen.
There is the CF8 updater extension for Dreamweaver (for CS3
and CS4):
http://www.adobe.com/support/coldfusion/downloads.html
Which adds a new menu item on the Help menu which goes to:
http://www.adobe.com/support/documentation/en/coldfusion/
Adobe is moving toward online help, but they tend to have
PDFs available of their docs which the above link offers.
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert -
DW 8 Templates in Dreamweaver CS3
Greetings,
I am currently working with a Dreamweaver template (Version
8) and I have recently installed Dreamweaver CS3 to check it out. I
wanted to update several pages with the updated template in CS3,
but when I tried, I got an error related to nested editable
regions. I checked out my code, and cleaned it up (it is strict
xhtml 1.0) and tried again. I didn't get the error, but none of the
pages are updated. Does somebody know why this could happen?If you have made changes to a template page and those changes
are not
propagated to the respective child pages then only one of two
possibilities
exist:
1. Your changes were made to EDITABLE regions in the template
files, or
2. The site cache is corrupted, and can be fixed by using
SITE | Advanced >
Recreate Site Cache
Might one of those be the cause?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Melissa_Serrano" <[email protected]> wrote
in message
news:f7gk2r$k45$[email protected]..
> Greetings,
>
> I am currently working with a Dreamweaver template
(Version 8) and I have
> recently installed Dreamweaver CS3 to check it out. I
wanted to update
> several
> pages with the updated template in CS3, but when I
tried, I got an error
> related to nested editable regions. I checked out my
code, and cleaned it
> up
> (it is strict xhtml 1.0) and tried again. I didn't get
the error, but none
> of
> the pages are updated. Does somebody know why this could
happen?
>
Maybe you are looking for
-
"I am trying to precompile some of my jsps. When I try to precompile the JSP that uses useBean. I got the following error: Exception in thread "main" java.lang.ExceptionInInitializerError:
-
The Find function does not work with one of my pdf files
I uninstalled whatever version of the reader that had been my computer at installed 11.0.06. Same problem. Seems like the Find function has a problem with just one of my many pdf files. For the problem file, the PDF Producer was IIPDFLib2.x, version
-
How can I match my music time with the slide show time. Also my 1st slide stops but music plays the song. Thax
-
http://otn.oracle.com/events/otnworkshop/toplink.html Java developers need to use relational databases for persistence. Using TopLink you can eliminate the inherent risks involved when architecting for persistence. This one-day workshop will teach yo
-
Ipad air rebbot with blue screen after ios8 installed
After I have installed ios8 on my iPad Air 64 GB Wi-Fi I get the problem the device reboot suddenly after get a blue screen. The problem happens with any application I am using. How could fix it?