Dreamweaver CS3 hogging CPU - any fix?

I finally upgraded from GoLive CS2 to Dreamweaver CS3. (If it ain't broke, don't fix it!)
Dreamweaver at idle is using over a quarter of my CPU! (Mac Mini 1.83GHz Intel Core Duo, 2GB RAM) No well-written program does this so I figure there must be something that I can turn off that was defaulted to "on" so I can speed up my computer.
It's so bizarre that it demands almost half a GHz—460,000,000 cycles per second, folks—just sitting there!
Thanks!
Andrew

Thanks for the suggestion, but no. Activity Monitor is showing it's distinctly the Dreamweaver CPU process, plus I updated the software just a few days before.
I've seen other discussions online posted in the past couple of years about the same CPU-hogging problem on Mac and Windows boxes. There was some Windows patch (I believe it was from an unauthorized 3rd party) that purportedly fixed the problem, but I didn't see anything for Macs and I wasn't sure if there was any official solution (even if it involves upgrading to CS4) . . . other than live with a program that's making your system slow down for no good reason.
Thanks,
Andrew

Similar Messages

  • Dreamweaver CS3 Extension for CFMX7

    I've just downloaded (and installed) CFMX7.02 and Dreamweaver
    CS3. The extension for Dreamweaver in /wwwroot/CFIDE/installers ...
    file name: CFMX7DreamWeaverExtensions.mxp says isn't compatible w/
    Dreamweaver CS3 when installed using the Extension Manager that
    came with the Dreamweaver CS3 installation.
    Any help on getting CF extensions for Dreamweaver CS3 would
    be appreciated.

    I believe that extension was for DW MX 2004, everything after
    that should have the server side CF stuff in it.
    Ken Ford
    Adobe Community Expert
    Fordwebs, LLC
    http://www.fordwebs.com
    "Chuck1411" <[email protected]> wrote in
    message news:f253ro$ig8$[email protected]..
    > I've just downloaded (and installed) CFMX7.02 and
    Dreamweaver CS3. The
    > extension for Dreamweaver in /wwwroot/CFIDE/installers
    ... file name:
    > CFMX7DreamWeaverExtensions.mxp says isn't compatible w/
    Dreamweaver CS3 when
    > installed using the Extension Manager that came with the
    Dreamweaver CS3
    > installation.
    >
    > Any help on getting CF extensions for Dreamweaver CS3
    would be appreciated.
    >

  • Just updated to Firefox 3.6.9, I'm building a site and the Dreamweaver CS3 Preview feature no longer works in previewing my pages. Any fixes available?

    Just updated to Firefox 3.6.9 this morning. I'm building a site using Dreamweaver CS3 for a class and the Preview feature was working fine before the update. I can preview my pages in other browsers successfully, but now if I choose Firefox, no window opens.
    I have a Macbook Pro, OS X.

    Sorry, Mozilla did a security fix that broke Dreamweaver with Firefox. Virtually no other programs were broken with that fix, and considering the age of Dreamweaver (~5 years since it was last updated) they decided not to back-out that security fix for one old, elderly program. This problem was discussed at length back in January and February after Firefox 3.6 was first released.

  • Dreamweaver CS3 (9) maxed CPU slow performance and FTP issues.

    Dreamweaver CS3 (9) maxed CPU slow performance and FTP
    issues.
    Never mind...I found it.
    Of course I have all the firewall, worm, scanning, phishing
    filtering, full time protect, and everything else turned off when I
    am working on a remote/testing site however I found the Symantec
    antivirus email scan being enabled (doesn't it just interact with
    my email program?) was getting in the way of DW9 ftp operations,
    causing some lagging that was putting DW9 into an unstable mode
    during and immediately after (10 seconds) ftp operations.
    The CPU still spikes to 99% during ftp functions but DW9
    works even though it's likely taxed to the max but when I turn off
    email scan DW9 returned to a functioning state during ftp and
    remote file view. Whatever it takes huh?
    PS: email scanning only never effected DW8.02
    My System Info: properly configured (as in: everything works
    or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
    – 1.5 GB ram – Intel extreme graphics card 64 MB ram
    – Apache 2.2 server – PHP 5 – MySQL 5 -
    phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
    3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
    GoLive - Photoshop - ImageReady – Illustrator – Acrobat
    – CuteFTP – Putty SSH - blabla...)

    Thanks for the response. I managed to Google the 'nobody' account and found the explanation.
    As you say, I assumed the 'syslogd' process had to do with system logs. I did check the console and couldn't find anything of particular interest in the logs.
    I'll continue to monitor but if anyone has any further suggestions please post.
    One thing that might also have an impact... my available drive space is now down to less than 5gb (runs anywhere between 1gb and 5gb free depending on what I'm running). I know this causes problems for Parallels as it keeps moaning at me, but would it cause any problems with OSX?
    Thanks again,
    Tom

  • PLEASE HELP - Problem with 2 column fixed template in Dreamweaver CS3

    I am trying to create a website using the 2 column fixed, right sidebar, header and footer html template in Dreamweaver CS3.  I tried putting a picture in the right side bar as well as with in the main content or left portion of the page, and neither picture is showing up when I view it in any of the browsers I'm using.
    I've made some minor changes in colors and sizing, but other than that no other changes.  The pic I put in for the header is showing up just fine though.
    Any help or advice to solve this issue would be greatly appreciated.
    Thanks!!

    Here is the base Dreamweaver code including the pic references that I'm trying to show on either side - when the browser opens, it only shows a blank space where the pics should be... let me know what you think.  Thanks!!
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/AL TemplateNEW.dwt" codeOutsideHTMLIsLocked="false" -->
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <!-- InstanceBeginEditable name="doctitle" -->
    <title>Temp Home</title>
    <!-- InstanceEndEditable -->
    <!-- InstanceBeginEditable name="head" -->
    <!-- InstanceEndEditable -->
    <style type="text/css">
    <!--
    body  {
    font: 100% Verdana, Arial, Helvetica, sans-serif;
    background: #666666;
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #000000;
    .twoColFixRtHdr #container {
    width: 780px;  /* using 20px less than a full 800px width allows for browser chrome and avoids a horizontal scroll bar */
    background: #FFFFFF;
    margin: 0 auto; /* the auto margins (in conjunction with a width) center the page */
    border: 1px solid #000000;
    text-align: left; /* this overrides the text-align: center on the body element. */
    .twoColFixRtHdr #header {
    background: #DDDDDD;
    padding: 0 10px 0 20px;  /* this padding matches the left alignment of the elements in the divs that appear beneath it. If an image is used in the #header instead of text, you may want to remove the padding. */
    .twoColFixRtHdr #header h1 {
    margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
    padding: 10px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
    .twoColFixRtHdr #sidebar1 {
    float: right; /* since this element is floated, a width must be given */
    width: 200px; /* the actual width of this div, in standards-compliant browsers, or standards mode in Internet Explorer will include the padding and border in addition to the width */
    background: #EBEBEB; /* the background color will be displayed for the length of the content in the column, but no further */
    padding: 15px 10px;
    .twoColFixRtHdr #mainContent {
    margin: 0 250px 0 0; /* the right margin on this div element creates the column down the right side of the page - no matter how much content the sidebar1 div contains, the column space will remain. You can remove this margin if you want the #mainContent div's text to fill the #sidebar1 space when the content in #sidebar1 ends. */
    padding: 0 20px; /* remember that padding is the space inside the div box and margin is the space outside the div box */
    .twoColFixRtHdr #footer {
    padding: 0 10px 0 20px; /* this padding matches the left alignment of the elements in the divs that appear above it. */
    background:#DDDDDD;
    .twoColFixRtHdr #footer p {
    margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
    padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
    .fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
    float: right;
    margin-left: 8px;
    .fltlft { /* this class can be used to float an element left in your page */
    float: left;
    margin-right: 8px;
    .clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
    clear:both;
        height:0;
        font-size: 1px;
        line-height: 0px;
    -->
    </style><!--[if IE 5]>
    <style type="text/css">
    /* place css box model fixes for IE 5* in this conditional comment */
    .twoColFixRtHdr #sidebar1 { width: 220px; }
    </style>
    <![endif]--><!--[if IE]>
    <style type="text/css">
    /* place css fixes for all versions of IE in this conditional comment */
    .twoColFixRtHdr #sidebar1 { padding-top: 30px; }
    .twoColFixRtHdr #mainContent { zoom: 1; }
    /* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
    </style>
    <![endif]--></head>
    <body class="twoColFixRtHdr">
    <div id="container">
      <div id="header">
        <h1>Header</h1>
      <!-- end #header --></div>
      <div id="sidebar1">
        <h3>Sidebar1 Content</h3>
        <!-- InstanceBeginEditable name="RightSideBar" -->
        <p>Right Side Bar Content - - -    </p>
        <p>Inserted pic below here</p>
        <p><img src="/images/Syntergy5.jpg" width="123" height="105" /></p>
        <p>The background color on this div will only show for the length of the content. If you'd like a dividing line instead, place a border on the right side of the #mainContent div if it will always contain more content. </p>
        <p>Donec eu mi sed turpis feugiat feugiat. Integer turpis arcu, pellentesque  eget, cursus et, fermentum ut, sapien. Fusce metus mi, eleifend  sollicitudin, molestie id, varius et, nibh. Donec nec libero.</p>
    <!-- InstanceEndEditable -->
        <p> </p>
      <!-- end #sidebar1 --></div>
      <div id="mainContent">
        <h1> Main Content </h1>
        <!-- InstanceBeginEditable name="MainContent" -->
        <p>Main Content - - </p>
        <p>inserted pic below here:</p>
        <p><img src="/images/Kelly1.jpg" width="285" height="236" /></p>
        <p> </p>
        <p>Lorem ipsum dolor sit amet, consectetuer adipiscing elit. Praesent aliquam,  justo convallis luctus rutrum, erat nulla fermentum diam, at nonummy quam  ante ac quam. Maecenas urna purus, fermentum id, molestie in, commodo  porttitor, felis. Nam blandit quam ut lacus. Quisque ornare risus quis  ligula. Phasellus tristique purus a augue condimentum adipiscing. Aenean  sagittis. Etiam leo pede, rhoncus venenatis, tristique in, vulputate at,  odio. Donec et ipsum et sapien vehicula nonummy. Suspendisse potenti. Fusce  varius urna id quam. Sed neque mi, varius eget, tincidunt nec, suscipit id,  libero. In eget purus. Vestibulum ut nisl. Donec eu mi sed turpis feugiat  feugiat. Integer turpis arcu, pellentesque eget, cursus et, fermentum ut,  sapien. Fusce metus mi, eleifend sollicitudin, molestie id, varius et, nibh.  Donec nec libero. </p>
        <!-- InstanceEndEditable -->
        <p>
          <!-- end #mainContent -->
        </p>
      </div>
    <!-- This clearing element should immediately follow the #mainContent div in order to force the #container div to contain all child floats --><br class="clearfloat" />
      <div id="footer">
        <p>Footer</p>
      <!-- end #footer --></div>
    <!-- end #container --></div>
    </body>
    <!-- InstanceEnd --></html>

  • Active X fix  in Dreamweaver CS3 is breaking...

    Hello All-
    I have searched until I am blue in the face and most of the
    issues around the Dreamweaver fix for "click to activate" issues in
    IE revolve around the end user in this case ME not uploading the
    scripts to the site...well I am lucky enough to understand that key
    step and have left it as Dreamweaver wants to do it, by installing
    in the root of the site in the Scripts folder, I have also moved it
    to the same level as the index.html and everywhere in between with
    no Avail... In IE after adding the automated scripts Dreamweaver
    includes I get a big fat Red X...Anyone else having this issue? I
    have updated Dreamweaver CS3 and it on the latest and greatest, all
    i want to do is embed the youtube video on a page. Any Ideas?
    To get to this I did the following: New html file, grab embed
    code from any youttube video, paste, save, close, open file again,
    allow dreamweaver to add the scripts and change the embed code,
    save, upload including the two scripts, open in IE and view a nice
    fat red X...
    Please see link below for the example...
    Here is the broken
    code
    Thanks in advance.
    John

    It ain't gonna work. In your case, you are falling afoul of
    the script
    itself. Here is what you have -
    <div><p>Youttube embed</p><script
    type="text/javascript">
    AC_AX_RunContent(
    'width','425','height','355','src','
    http://www.youtube.com/v/bkeycliUjSg&rel=1&border=0','type','application/x-shockwave-flash ','wmode','transparent','movie','http://www.youtube.com/v/bkeycliUjSg&rel=1&border=0'
    ); //end AC code
    Note that the FILENAME for the swf file in that line IS
    MISSING THE "SWF".
    This is because DW assumes that you are not going to be
    linking to a file
    with URL variables like you have there
    (&rel=1&border=0), and it
    automatically inserts the SWF there giving you a bogus link,
    e.g.,
    http://www.youtube.com/v/bkeycliUjSg&rel=1&border=0.swf
    See what I mean?
    For something like this, use this method -
    http://blog.deconcept.com/swfobject/
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Web_deverz" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hello All-
    >
    > I have searched until I am blue in the face and most of
    the issues
    > around
    > the Dreamweaver fix for "click to activate" issues in IE
    revolve around
    > the end
    > user in this case ME not uploading the scripts to the
    site...well I am
    > lucky
    > enough to understand that key step and have left it as
    Dreamweaver wants
    > to do
    > it, by installing in the root of the site in the Scripts
    folder, I have
    > also
    > moved it to the same level as the index.html and
    everywhere in between
    > with no
    > Avail... In IE after adding the automated scripts
    Dreamweaver includes I
    > get a
    > big fat Red X...Anyone else having this issue? I have
    updated Dreamweaver
    > CS3
    > and it on the latest and greatest, all i want to do is
    embed the youtube
    > video
    > on a page. Any Ideas?
    >
    > To get to this I did the following: New html file, grab
    embed code from
    > any
    > youttube video, paste, save, close, open file again,
    allow dreamweaver to
    > add
    > the scripts and change the embed code, save, upload
    including the two
    > scripts,
    > open in IE and view a nice fat red X...
    >
    > Please see link below for the example...
    >
    http://client.jfwebdev.com/activex/
    >
    > Thanks in advance.
    >
    > John
    >

  • Dreamweaver CS3 slow running one possible fix

    Hi Guys
    I have seen several threads relating to Dreamweaver CS3
    running slow - some about Managing Sites. I was having the same
    trouble and when clicking on a site it took over 30 seconds to
    bring the Edit Box up.
    I have been running Windows Defender and there is no settings
    adjustment in that at all. So I decided to take it off - et voila!
    Sites take exactly 1 second to appear, and MY problem at
    least appears to be fixed. I just thout I would pass this on in
    case anyone else is having the same problem. If you are, disable
    your firewall and test DW without it.
    It is so easy to blame Adobe when other programs are causing
    the problems.
    Hope this helps others.
    David Roberts

    Are you running a local firewall? Have you tried connecting
    with this
    turned off?
    Also, please tell us how you have configured your remote site
    definition.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "CartoonHead" <[email protected]> wrote in
    message
    news:fasak3$bfv$[email protected]..
    > "Derob99" <[email protected]> wrote in
    message
    > news:fap71p$s6a$[email protected]..
    >> Unfortunately, Murray, Live One Care has virutally
    no user settings at
    >> all. It is pretty much install and go with what they
    give you.
    >>
    >> Anyway, hopefully this will help others in the same
    boat.
    >
    >
    > I should have read the full post before taking of
    Defender. Anyhooo I am
    > not running "Live one Care" and I still have the same
    problem. I also
    > cannot upload anything to my site using site manager. A
    pop up says login
    > or password error. I have checked and rechecked and it
    will not connect. I
    > can however log in to my server directly, but I don't
    wish to do it this
    > way. Any help would be gratefully appreciated .
    >
    >
    > CH
    >

  • URGENT: Dreamweaver CS3 crashes while uploading any PHP File

    Hello,
    My Dreamweaver CS3 crashes everytime I try to upload any PHP
    file to the Web Server. It does upload the file but crashes and you
    received a "Not Responding" error in the Windows title bar. I did
    search alot on this issue until I found the ".
    Dreamweaver
    CS3 crashes after DST ends" problem. I deleted the cache file
    as required but of NO HELP.
    . It is very annoying to restart Dreamweaver
    everytime you want to upload any PHP file to the Web Server after
    editing it. It doesn't happen with any other types of files. Please
    help me guys here or I will lose my mind.

    Bad news for you too.
    First, you are not addressing Adobe here in the user forums.
    Secondly, Adobe does not support CS3 any longer because it hasn't been sold for years.
    Therefore, you're left to the good will of fellow users who volunteer their time here free of charge, if one of them has a solution to your issue.  No one is under any obligation to reply, so ask nicely. 
    One thing I can tell you is that you have not applied any of the versions available for Photoshop.  Unfortunately, the Adobe auto updater was an unmitigated piece of cr@p in any version prior to CS6.  Do not rely on it to assume you are up to date just because it doesn't show any updates available to you under Help > Updates.
    You need to look for the downloads and apply them manually yourself.
    I can't offer any more assistance because I don't do Windows.  Sorry.

  • I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

    Hi rmarchione,
    Can you try restoring preferences and let us know if it helps?
    Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • Dreamweaver cs3 fresh install from download area not working. Any ideas please?

    Hello
    I need to reinstall dreamweaver CS3 on my Mac. I have tried to do this in the Adobe download area but I am getting a 404. I have the original Dreamweaver CS3 disk but my CD ROM is broken. I have got the serial numbers but the download are won't let me get that far. Any help would be gratefully received. thanks.
    Paul

    Paul where exactly are you attempting to download Dreamweaver Creative Suite 3 from?  Is it Download CS3 products?  If so then please try utilizing the steps listed at Download Adobe CS4 and CS3 Free Trials Here (incl. After Effects) | ProDesignTools.  Please make sure to complete the Very Important Instructions prior to clicking on the download links.

  • Embed 'Any FlvPlayer' into Dreamweaver CS3

    I have purchased 'Any FlvPlayer' and although I can develop the video player I can't embed it into my page on Dreamweaver CS3. Can anybody help please?

    I have retried to embed following the instructions at http://www.web-video-player.com/support/two-codes-display-web-videos-on-the-webpage.php and I have put the output files into the webpage folder under a "boxvideos" folder. I am trying to link this video player into another dreamweaver page, so I have copied the html from the fs_aux.html page on wordpad as it states between object tags and pasted this into the code where i want it on my video page www.thefortunas.co.uk/videos . I then change the text to read http://www.thefortunas.co.uk/boxvideos/  as it states on the four sections of code. When I try to play it on the properties panel it just goes white and nothing happens.
    When I view page on the any flvplayer publish folder it's ok.

  • Windows98 100% cpu usage, any fix?

    Hi,
    Any fix available for the 100% cpu usage problem in Windows 98, or do we have to wait untill 8.1.7 for Win98 and hope that it works in that version?
    regards,

    This issue can be caused by confliction from one of the background programs. You may troubleshoot in Clean Boot Mode.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.microsoft.com/kb/929135
    However if the issue persists in Clean Boot Mode, I suggest you click the Start Button, All Programs, Accessories, System Tools, and then click Internet Explorer (No Add-ons).  If the issue does not reoccur, it may be caused by an IE Add-on. In that
    case, let’s continue to perform the following steps to narrow down the cause.
    Check Internet Explorer Add-Ons
    =========================
    1. Click Tools, and then click Internet Options.
    2. Click the "Programs" tab, and then click Manage Add-ons.
    3. Select an add-on in the Name list, and then click Disable.
    4. Restart IE with Add-ons and check the issue again.
    If the issue is resolved, the disabled Add-on was the cause of the issue. If the issue reoccurs, continue to disable the next Add-on using the same method.
    By doing so, we could determine which Add-on contributed to the issue.
    If it does not help, please reset IE and see if it works.
    How to reset Internet Explorer settings
    http://support.microsoft.com/kb/923737
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Dreamweaver CS3 slow performance issue confusions & work arounds

    Never mind...I found it.
    Of course I have all the firewall, worm, scanning, phishing
    filtering, full time protect, and everything else turned off when I
    am working on a remote/testing site however I found the Symantec
    antivirus email scan being enabled (doesn't it just interact with
    my email program?) was getting in the way of DW9 ftp operations,
    causing some lagging that was putting DW9 into an unstable mode
    during and immediately after (10 seconds) ftp operations.
    The CPU still spikes to 99% during ftp functions but DW9
    works even though it's likely taxed to the max but when I turn off
    email scan DW9 returned to a functioning state during ftp and
    remote file view. Whatever it takes huh?
    PS: email scanning only never effected DW8.02
    My System Info: properly configured (as in: everything works
    or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
    – 1.5 GB ram – Intel extreme graphics card 64 MB ram
    – Apache 2.2 server – PHP 5 – MySQL 5 -
    phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
    3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
    GoLive - Photoshop - ImageReady – Illustrator – Acrobat
    – CuteFTP – Putty SSH - blabla...)

    sundap wrote:
    > Hey , i am pretty new to PHP and MYSQL. I have a login
    page that uses
    > Dreamweaver CS3's Log In User built in function.
    However, when succesfully
    > logged in, I want to create a page that says Hello John,
    or Welcome Bob
    > according to the user that logs in and have been
    unsuccessful so far. I go to
    > the correct page but it says Welcome ( Blank Space)
    >
    > any thoughts? i tried this
    >
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15398&sliceId=2
    >
    > and that doesnt work for me either.....
    What does doesn't work mean?
    Once the user has logged in, can you output the MM_Username
    session variable to the page (in particular the page that the log
    in user behavior has set for a successful log in)? You can do that
    by simply selecting it in the Bindings panel and dragging into the
    design view then previewing the page (after you've logged in of
    course).
    Also to get better responses (and more folks looking at it),
    you should probably post this in the Dreamweaver Application dev
    group:
    http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=263&entercat= y
    Danilo Celic
    |
    http://blog.extensioneering.com/
    | Adobe Community Expert

  • Fireworks CS4, Dreamweaver CS3

    Does anyone know if Fireworks CS4 would work with Dreamweaver
    CS3? I already have Dreamweaver CS3, and don't want to spend extra
    money to upgrade if I don't have to, but I can't seem to find
    Fireworks CS3 available anywhere.
    Thank you!

    "whatalotofrubbish" <[email protected]>
    wrote in message
    news:gq8rb2$pqi$[email protected]..
    >
    > Question: Is Dreamweaver CS4 backwards compatible with
    Fireworks CS3,
    I use DWCS4 and FWsCS3 and haven't had any problems.
    I do have the latest version of FWs, however, find it a real
    resource hog and found that I had to
    restart this version more times during the day than I ever
    did with FWs CS3. So now I use the older
    version rather than the latest.
    I can run FWs CS3 for 2+ days straight without having any
    "low memory" errors, but the latest
    version will stop responding after a few hours. Apparently
    Adobe is looking into this, but when a
    fix will be found is unknown.
    I don't believe you'll have any problems combining versions.
    >and is it worth spending $220 (in the UK - as opposed to
    $199 in the USA) on the
    > Dreamweaver upgrade.
    The lastest DW is better than the last, as most new releases
    are, but it's really up to you whether
    you see the value in updating. Have a look at the Adobe site
    and check out the new features and
    then decide whether the upgrade is worth it for you :-)
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://twitter.com/nadiap
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    CSS Tutorials for Dreamweaver |
    http://www.adobe.com/devnet/dreamweaver/css.html
    Book: Ultimate CSS Reference (aff link) |
    http://www.sitepoint.com/launch/005dfd4/3/133

  • I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues.  Now getting error "You can only install one Adobe product at a time.  Please complete the other installation before attempting to install ......."  There is no other Adobe

    I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues.  Now getting error "You can only install one Adobe product at a time.  Please complete the other installation before attempting to install ......."  There is no other Adobe product installing.  I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked.  I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.  Please help.

    A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
    Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
    Mylenium

Maybe you are looking for

  • Gray screen, apple logo and spinning gear hang at start up

    after a lengthy round of "bejeweled", i let my imac fall into screen saver mode. when i tried to log back in, i tapped the mouse and the imac flashed as it does when actuated outside a dialogue without clicking the okay button, and immediately return

  • How to View the Doc Types display along with description

    Hi All    In ME21N transaction in Doc type tab, only description is appearing, i want that along with technical names, for example  li"NB-Standard Purchase Order", like this, so what settings to be done? Rgds Ramesh

  • File name mystery - works in BeanShell - but not in plain java

    I have added a step in a KM with the following: <% import java.io.*; try FileWriter tempFile = new FileWriter("newSourceTableList_"+odiRef.getSession("SESS_NO")+".txt"); tempFile.write(newSourceTableList); tempFile.close(); catch (Exception e) out.pr

  • ADC port from VGA?

    My brother's Sawtooth G4 has a NVIDIA GeForce2 MX graphics card in it and because it's a Sawtooth the ADC port on it doesn't work but the VGA does. Is there a way I can get an adapter that will let me connect my CRT Apple Studio Display that has the

  • Sequence PK generation is messed up after table import

    Thought I'd post this here where the possibility of direct object manipulation is what it needed. Recently created new 10.2.0.1.0 database on new machine as a copy of one running on another machine. Installed Apex 2.2 and used the data import feature