Dreamweaver CS3 Login user issue

Hey , i am pretty new to PHP and MYSQL. I have a login page
that uses Dreamweaver CS3's Log In User built in function. However,
when succesfully logged in, I want to create a page that says Hello
John, or Welcome Bob according to the user that logs in and have
been unsuccessful so far. I go to the correct page but it says
Welcome ( Blank Space)
any thoughts? i tried this
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15398&sliceId=2
and that doesnt work for me either.....
what am i missing here? any help is greatly
appreciated

sundap wrote:
> Hey , i am pretty new to PHP and MYSQL. I have a login
page that uses
> Dreamweaver CS3's Log In User built in function.
However, when succesfully
> logged in, I want to create a page that says Hello John,
or Welcome Bob
> according to the user that logs in and have been
unsuccessful so far. I go to
> the correct page but it says Welcome ( Blank Space)
>
> any thoughts? i tried this
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15398&sliceId=2
>
> and that doesnt work for me either.....
What does doesn't work mean?
Once the user has logged in, can you output the MM_Username
session variable to the page (in particular the page that the log
in user behavior has set for a successful log in)? You can do that
by simply selecting it in the Bindings panel and dragging into the
design view then previewing the page (after you've logged in of
course).
Also to get better responses (and more folks looking at it),
you should probably post this in the Dreamweaver Application dev
group:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=263&entercat= y
Danilo Celic
|
http://blog.extensioneering.com/
| Adobe Community Expert

Similar Messages

[DW-CS3] Login User passing parameter

Hi. Why this line of code does not work?
$MM_redirectLoginSuccess = "admin/editar.php?id_col=<?php
echo $_GET['id_col']; ?>";
Im trying to create a login user page and i need to send an
url parameter to open an specific page content. The above code is
the variable url to redirect in case of a success login but fails
when i try to send the "id_col" parameter. If i write just the next
line it works fine:
$MM_redirectLoginSuccess = "admin/editar.php";
This is the code generated by the Login User Server Behavior
in DW.
Thanks for help.

geschenk wrote:
> in this case its not a DW issue?
> >>
>
> I´m pretty certain this *is* a DW issue -- we had
exactly this problem with
> the Dreamweaver Developer Toolbox, means if folks had a
"user" table, it even
> completely ruined their Developer Toolbox configuration
file. When crawling
> through DW´s "configuration" files I noticed that
DW is using this very term
> internally all over the place, and to me it seems that
we´re having a naming
> conflict here
Dreamweaver certainly isn't the issue that the OP is
experiencing. Their issue is occurring when they run the page from
the server, that's where the error is occurring.
Danilo Celic
| Extending Knowledge Daily :
http://CommunityMX.com/
| Adobe Community Expert

Dreamweaver CS3 slow performance issue confusions & work arounds

Never mind...I found it.
Of course I have all the firewall, worm, scanning, phishing
filtering, full time protect, and everything else turned off when I
am working on a remote/testing site however I found the Symantec
antivirus email scan being enabled (doesn't it just interact with
my email program?) was getting in the way of DW9 ftp operations,
causing some lagging that was putting DW9 into an unstable mode
during and immediately after (10 seconds) ftp operations.
The CPU still spikes to 99% during ftp functions but DW9
works even though it's likely taxed to the max but when I turn off
email scan DW9 returned to a functioning state during ftp and
remote file view. Whatever it takes huh?
PS: email scanning only never effected DW8.02
My System Info: properly configured (as in: everything works
or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
– 1.5 GB ram – Intel extreme graphics card 64 MB ram
– Apache 2.2 server – PHP 5 – MySQL 5 -
phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
GoLive - Photoshop - ImageReady – Illustrator – Acrobat
– CuteFTP – Putty SSH - blabla...)

sundap wrote:
> Hey , i am pretty new to PHP and MYSQL. I have a login
page that uses
> Dreamweaver CS3's Log In User built in function.
However, when succesfully
> logged in, I want to create a page that says Hello John,
or Welcome Bob
> according to the user that logs in and have been
unsuccessful so far. I go to
> the correct page but it says Welcome ( Blank Space)
>
> any thoughts? i tried this
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15398&sliceId=2
>
> and that doesnt work for me either.....
What does doesn't work mean?
Once the user has logged in, can you output the MM_Username
session variable to the page (in particular the page that the log
in user behavior has set for a successful log in)? You can do that
by simply selecting it in the Bindings panel and dragging into the
design view then previewing the page (after you've logged in of
course).
Also to get better responses (and more folks looking at it),
you should probably post this in the Dreamweaver Application dev
group:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=263&entercat= y
Danilo Celic
|
http://blog.extensioneering.com/
| Adobe Community Expert

Dreamweaver CS3 Split View Issue

Hello All,
I just got the new dreamweaver CS3 and when working in split
view nothing is refreshing correctly. What I mean is, if I click on
some text in the design portion of dreamweaver to try and change
the font, css assignment, or whatever I cannot. I have to click on
the text, hit refresh (f5) and then the correct information in the
properties panel shows up. I have the same problem when selecting
something in the code portion of the split; it does not select the
portion in the design section. What is the deal? Dreamweaver 8 did
this fine.
Anyone else have this problem?
Alex

What OS? Does the problem happen with all files and all
sites, just some,
or just one?
David Alcala
Adobe Product Support

Dreamweaver CS3 Flash Video Issue

I have Dreamweaver CS3 running in OS X 10.4.11 all updated.
all of a sudden when I go to insert a Flash Video into a page I get the wheel of death and DW is frozen. I formatted the video in Flashconverter and it plays fine in mpeg streamclip.
The Insert dialog opens and I can chose the flash video and then hit detect size and the controls I want. and then I hit ok and the wheel comes up and never goes away.
If I create a new sit it will let me add the video.
Any ideas why this is happening?
Thanks
jeff E

What OS? Does the problem happen with all files and all
sites, just some,
or just one?
David Alcala
Adobe Product Support

Dreamweaver CS3 (Mac) performance issues

I am running DW CS3 on a MacbookPro 2.16/ 2Gb Mac OS X
10.4.10.
It is slow to respond to mouse actions (constantly hitting
the wrong button as a result), constantly hangs (but comes back to
life eventually), is sometimes slow to type, renders faint dotted
lines across pages (built in MX2004 with CSS) and is generally
CRAP!
It runs slower than MX2004 on the same machine. I have both
versions installed on the machine (but don't run them at the same
time!). I have similar issues with Conribute CS3 not responding as
well.
Please offer some assistance before I throw my computer
across the room! Why is it so fsat on a PC, is something to do with
the way the Mac does Java? Help - i don't want to get rid of my Mac
for a PC!

Hi. I am experiencing the very same problem. No issues for
years up until recently - but my problems started not long after I
installed the latest upgrade for Mac OS 10.5.4 to 10.5.5 - I am
going to use Time Machine to revert back to 10.5.4 it may not be
the answer, nor a long-term solution but it driving me nuts.
I am currently deleting sites out of my site manager and then
reloading them from the STE file everytime I need to work on them.
I have read that this problem existed in Dreamweaver 8 on Windows,
but an update sorted it out - lets hope an update appears soon to
fix this problem.

Dreamweaver CS3 Remote Image Issue

Having an issue seeing some remote images and not sure what settings will fix it. I need to include absoulte references in some situations and I cannot see some of the images in design view.
If I have an htm file in the root of the site and do an absoulte reference to an image in a subfolder (the absolute reference includes the full URL ( eg. http://www.mysite.com/images/image1.jpg) I can see the image in design view just fine. However if I have the htm file in a subfolder and do an absolute reference to an image in another subfolder outside of the subfolder that contains my layout, the image does not display in deign view.
Example:
file1.htm is in subfolder /layouts
image1.jpg is in subfolder /images
I do an absolute refence in the code http://www.mysite.com/images/image1.jpg = Cannot see the image1.jpg in design view
If I move the image into any subfolder with the same subfolder as the htm file, the issues is fixed.
Example
file1.htm is in subfolder /layouts
image1.jpg is in subfolder /layouts/images
I do an absolute refence in the code http://www.mysite.com/layouts/images/image1.jpg = I can see image1.jpg in design view
I tried the different site settings for relative refference from Document to Site root and neither seemed to fix the issue
I recently moved over to CS3 from 2004MX and have a lot of files that are affected. I am hoping to not have to do a lot of restructuring to fix this

Having an issue seeing some remote images and not sure what settings will fix it. I need to include absoulte references in some situations and I cannot see some of the images in design view.
If I have an htm file in the root of the site and do an absoulte reference to an image in a subfolder (the absolute reference includes the full URL ( eg. http://www.mysite.com/images/image1.jpg) I can see the image in design view just fine. However if I have the htm file in a subfolder and do an absolute reference to an image in another subfolder outside of the subfolder that contains my layout, the image does not display in deign view.
Example:
file1.htm is in subfolder /layouts
image1.jpg is in subfolder /images
I do an absolute refence in the code http://www.mysite.com/images/image1.jpg = Cannot see the image1.jpg in design view
If I move the image into any subfolder with the same subfolder as the htm file, the issues is fixed.
DW CS3 does not try to map remote images to your local folder, so make sure that your they exist in your remote site.
Also note that DW CS5 loads remote images in a background thread, so your pages will load much faster.
HTH,
Randy

Dreamweaver CS3 Site View issue

When I first connect to my main Website, the local root
folder appears for about 5 seconds. If I don't expand the view
immediately, it disappears and I have to hit the Refresh button to
get it to display. If I expand the folder, the site folders appear,
but the root folder immediately disappears. The biggest problems
with this are 1) I don't have a site folder to select when I want
to do a right-click Select Newer Local; and 2) I can't do a control
collapse to close all the folders in the site. This does not happen
with the Remote site root folder, it remains visible all the time.
Any idea whats going on?

What OS? Does the problem happen with all files and all
sites, just some,
or just one?
David Alcala
Adobe Product Support

Dreamweaver CS3 hangs on "initializing files" in Windows Vista Home Premium

Hi,
Anybody else encountering this issue? I noticed this7 error
in Windows Vista Home Premium. When you launch Dreamweaver CS3, it
opens the splash screen, displays “initializing files”
and thats it.
Necessary Troubleshooting steps we’re already done to
attempt to launch/fix the program but to no avails.
seems the problem happens on acer computers with 4 gigs of
ram.
You can check it from this
Thread
Thanks! I hope someone from engineering can take a look at
this issue!

A little more on this topic with solution ...
http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
Regards.
Patrick.

Dreamweaver CS3 After Mac Software Update

Dreamweaver CS3 has an issue with CSS background display and
other display issues after installing latest Mac software updates.
Display in browser is unaffected.
The culprit seems to be the Quicktime Version 7.6 update.
Changes to the folder located at System \ Library \ Quicktime seem
to cause an issue with Adobe products.
Solution: Do not intall Quicktime 7.6 update OR after update
replace Quicktime folder with previous version of folder from
backups. Restart computer.

I'm having other similar issues, where the splash window that
launches when you first start the app just sits there for about 3-4
minutes before dreamweaver launches. See no effect with other adobe
apps. This started after a mac update and an adobe update of some
other programs. FYI... I'm using CS4

Dreamweaver CS3 Freezing on Uploading Files

Has anyone ever have this problem of Dreamweaver CS3 freezing
when uploading a file or multiple files to the remote server?
Mine just started doing that and it's nearly impossible to
work in that condition, I have to force quit everytime I uploaded a
file.
Anyone has a solution to that?
I really appreciate any suggestions and tips! Thanks!

A little more on this topic with solution ...
http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
Regards.
Patrick.

ColdFusion Login Wizard: How do you access this in Dreamweaver CS3

The 'ColdFusion MX 7 Extensions'
(CFMXDreamWeaverExtensions.mxp) could be installed for 'Dreamweaver
MX 2004' using the 'Adobe Extension Manager'. This then gave access
to the 'Coldfusion Login Wizard' available under
'Commands/Coldfusion Login Wizard'.
However, the file 'CFMX7DreamWeaverExtensions.mxp' generates
the error 'This version of the 'CFMX7 Extensions' extension is not
compatible with Dreamweaver CS3 when installing in Dreamweaver CS3.
I have downloaded 'dwmx2004_extensions_for_cfmx7.mxp' from
http://www.adobe.com/support/coldfusion/downloads.html
but this doesn't work!
I cannot find an equivalent .mxp file on the Adobe website or
explanation anywhere despite exhaustive searching!
Any help will be very gratefully received!

Hi Divya,
The below code is working for me. You can try with this: This is for currently logged in User.
String userName = "";
          IWDClientUser wdUser = null;
          try
               wdUser = WDClientUser.getCurrentUser();
          catch (WDUMException e)
               wdComponentAPI.getMessageManager().reportException(e.getLocalizedMessage(), false);
          IUser usernam = wdUser.getSAPUser();
          userName = usernam.getUniqueName();
regards,
Siva

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.

A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium

Dreamweaver CS3 (9) maxed CPU slow performance and FTP issues.

Dreamweaver CS3 (9) maxed CPU slow performance and FTP
issues.
Never mind...I found it.
Of course I have all the firewall, worm, scanning, phishing
filtering, full time protect, and everything else turned off when I
am working on a remote/testing site however I found the Symantec
antivirus email scan being enabled (doesn't it just interact with
my email program?) was getting in the way of DW9 ftp operations,
causing some lagging that was putting DW9 into an unstable mode
during and immediately after (10 seconds) ftp operations.
The CPU still spikes to 99% during ftp functions but DW9
works even though it's likely taxed to the max but when I turn off
email scan DW9 returned to a functioning state during ftp and
remote file view. Whatever it takes huh?
PS: email scanning only never effected DW8.02
My System Info: properly configured (as in: everything works
or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
– 1.5 GB ram – Intel extreme graphics card 64 MB ram
– Apache 2.2 server – PHP 5 – MySQL 5 -
phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
GoLive - Photoshop - ImageReady – Illustrator – Acrobat
– CuteFTP – Putty SSH - blabla...)

Thanks for the response. I managed to Google the 'nobody' account and found the explanation.
As you say, I assumed the 'syslogd' process had to do with system logs. I did check the console and couldn't find anything of particular interest in the logs.
I'll continue to monitor but if anyone has any further suggestions please post.
One thing that might also have an impact... my available drive space is now down to less than 5gb (runs anywhere between 1gb and 5gb free depending on what I'm running). I know this causes problems for Parallels as it keeps moaning at me, but would it cause any problems with OSX?
Thanks again,
Tom

Dreamweaver CS3 3 column CSS footer issue

Has anyone used the Three Column Absolutely Positioned Header
and Footer (thrColAbsHdr) CSS template in Dreamweaver CS3? If so,
has anyone figured out how to address issue of Sidebar1 and
Sidebar2 content floating over top of the footer (instead of
growing and pushing the footer down)?
Adrian Senior appears to have addressed it regarding the
twoColElsLtHdr CSS...
http://www.adobe.com/devnet/dreamweaver/articles/css_concepts_pt3_cs3.html
I've tried his suggestion and it still doesn't appear to be
working properly with this CSS/template (thrColAbsHdr).

Example 3-column CSS layout:
http://alt-web.com/TEMPLATES/3-col-fixed-layout.shtml
CSS divisions do not produce equal height columns. You'll need to trick the eye into thinking they are equal buy using a repeating background-image that tiles down the page. This technique is called Faux Columns.
You can see a crude example here:
http://alt-web.com/TEMPLATES/3-col-white-gray.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Dreamweaver CS3 Login user issue

Similar Messages

Maybe you are looking for