Dreamweaver CS3 SQL code
I have a working application that was created using DW
2004MX. I just upgraded to CS3 and am finding that code blocks
created before are changed by CS3 (if I update some characteristic)
and no longer function. A simple example is a recordset that uses
the SQL "IN" operator with a list of numbers (indexes) passed in a
URL parameter. When I create the recordset, the test function works
fine; however, when the page is operating the page will only
function if there is just one piece of data in the URL. If there is
more than one there is no response. I have attached a simple
example from both 2004 and CS3, I can edit the code to work but I'd
like to understand what's going on. Any ideas would be greatly
appreciated.
HGRMTT wrote:
> I have a working application that was created using DW
2004MX. I just upgraded
> to CS3 and am finding that code blocks created before
are changed by CS3 (if I
> update some characteristic) and no longer function. A
simple example is a
> recordset that uses the SQL "IN" operator with a list of
numbers (indexes)
> passed in a URL parameter. When I create the recordset,
the test function
> works fine; however, when the page is operating the page
will only function if
> there is just one piece of data in the URL. If there is
more than one there is
> no response. I have attached a simple example from both
2004 and CS3, I can
> edit the code to work but I'd like to understand what's
going on. Any ideas
> would be greatly appreciated.
>
> Under 2004 MX
> <%
> Dim rs_donations__MMColParam
> rs_donations__MMColParam = "1"
> If (Request.QueryString("DonationID") <> "") Then
> rs_donations__MMColParam =
Request.QueryString("DonationID")
> End If
> %>
> <%
> Dim rs_donations
> Dim rs_donations_numRows
>
> Set rs_donations =
Server.CreateObject("ADODB.Recordset")
> rs_donations.ActiveConnection = MM_connHGRM_STRING
> rs_donations.Source = "SELECT * FROM Donations WHERE
DonationID IN (" +
> Replace(rs_donations__MMColParam, "'", "''") + ") ORDER
BY LastName, FirstName"
> rs_donations.CursorType = 0
> rs_donations.CursorLocation = 2
> rs_donations.LockType = 1
> rs_donations.Open()
>
> rs_donations_numRows = 0
> %>
>
> Under CS3
> <%
> Dim rs_donations
> Dim rs_donations_cmd
> Dim rs_donations_numRows
>
> Set rs_donations_cmd = Server.CreateObject
("ADODB.Command")
> rs_donations_cmd.ActiveConnection = MM_connHGRM_STRING
> rs_donations_cmd.CommandText = "SELECT * FROM Donations
WHERE DonationID IN ("
> + rs_donations__MMColParam + ")"
> rs_donations_cmd.Prepared = true
> rs_donations_cmd.Parameters.Append
rs_donations_cmd.CreateParameter("param1",
> 5, 1, -1, rs_donations__MMColParam) ' adDouble
>
> Set rs_donations = rs_donations_cmd.Execute
> rs_donations_numRows = 0
> %>
>
When Dreamweaver went to 8.02 there were some major changes
introduced
to recordsets. It prevents the code from being susceptible to
SQL
injection attacks which was a well needed update, but this
means that
all recordsets need to be created from scratch.
See this:
http://kb.adobe.com/selfservice/viewContent.do?externalId=4e6b330a&sliceId=2
Steve
Similar Messages
-
Dreamweaver CS3 reforderss ColdFusion templates
Dreamweaver CS3 reorders ColdFusion template code without
being asked
When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
will reorder some ColdFusion tags.
For example:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "..Some Code..."
4. </cfcase>
5. <cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfdefaultcase>
8. </cfswitch>
9. <CFQUERY username="#request.dbuser#"
password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
10. Blah blah
11 .</cfquery>
Saved as a Dreamweaver 8 page and then subsequently opened in
Dreamweaver CS3, the code becomes jumbled as:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "...Some_Code.."
4.
5. </cfcase><cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfswitch>
8. </cfdefaultcase><CFQUERY
username="#request.dbuser#" password="#request.dbpass#"
DATASOURCE="#attributes.DSN#">
9. ..blah..blah..
10. </CFQUERY>
(Note the juxtaposition of the </cfdefaultcase> and
</cfswitch> tags on lines 7 & 8)
The Command "Clean up XHTML" has no effect.
This behavior occurs on every Mac running DWCS3 in our
office, but doesn't occur on Macs running DW8.
If the CF page is opened in a Text Editor and saved as a Text
doc and then opened in DWCS3 as a Text doc, the code stays intact
and is not scrambled.
However, as soon as the page is saved with the ".cfm"
extension, DWCS3 scrambles the </cfdefaultcase> and
</cfswitch> tags.
Adobe Dreamweaver Support has duplicated the error but has no
fix as of yet, so Dreamweaver CS3 is completely useless to me as a
CF editor.
Does anyone have any ideas?Dreamweaver CS3 reorders ColdFusion template code without
being asked
When opening a Dreamweaver 8 ColdFusion page, Dreamweaver CS3
will reorder some ColdFusion tags.
For example:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "..Some Code..."
4. </cfcase>
5. <cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfdefaultcase>
8. </cfswitch>
9. <CFQUERY username="#request.dbuser#"
password="#request.dbpass#" DATASOURCE="#attributes.DSN#">
10. Blah blah
11 .</cfquery>
Saved as a Dreamweaver 8 page and then subsequently opened in
Dreamweaver CS3, the code becomes jumbled as:
1. <cfswitch expression="#response.errorcode#">
2. <cfcase value = "10602">
3. "...Some_Code.."
4.
5. </cfcase><cfdefaultcase>
6. "...Some_Other_Code.."
7. </cfswitch>
8. </cfdefaultcase><CFQUERY
username="#request.dbuser#" password="#request.dbpass#"
DATASOURCE="#attributes.DSN#">
9. ..blah..blah..
10. </CFQUERY>
(Note the juxtaposition of the </cfdefaultcase> and
</cfswitch> tags on lines 7 & 8)
The Command "Clean up XHTML" has no effect.
This behavior occurs on every Mac running DWCS3 in our
office, but doesn't occur on Macs running DW8.
If the CF page is opened in a Text Editor and saved as a Text
doc and then opened in DWCS3 as a Text doc, the code stays intact
and is not scrambled.
However, as soon as the page is saved with the ".cfm"
extension, DWCS3 scrambles the </cfdefaultcase> and
</cfswitch> tags.
Adobe Dreamweaver Support has duplicated the error but has no
fix as of yet, so Dreamweaver CS3 is completely useless to me as a
CF editor.
Does anyone have any ideas? -
Dreamweaver CS3 and sql injection....
Any news if Dreamweaver CS3 will have the same "problems"
brought on by the
8.0.2 update to Dreamweaver 8?
Thanks!Excellent...glad to hear it and I look forward to getting
CS3. I held off
on 8 because of the so called problems.
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> Yes, that's what I do. Honestly, I've not seen any
problems there.
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "Pizza Good" <[email protected]> wrote in
message
> news:[email protected]...
>>I think it comes up more when you have a form and
pass the values to a
>>recordset which uses those values to query and filter
a recordset.
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>>I am processing form input, which I believe is
where SQL injection comes
>>>in.
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "Pizza Good" <[email protected]> wrote
in message
>>> news:[email protected]...
>>>> That's good, or perhaps you are not building
the types of sites that
>>>> may encounter the so called problems?
>>>>
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>>I have to say that I've used 8.0.2 with
such things quite a bit and not
>>>>>encountered *any* of the posted problems.
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "Paul Whitham AdobeCommunityExpert"
<[email protected]> wrote in
>>>>> message
news:[email protected]...
>>>>>> Using stored procedures is a good
safe guard against SQL injection
>>>>>> because you have to define your
parameter types, in much the same way
>>>>>> that the parameters in the 8.0.2
worked.
>>>>>>
>>>>>> Yes it did break a number of
extensions because the underlying code
>>>>>> was completely rewritten but it is
my understanding that most of
>>>>>> these were subsequently patched to
work with it.
>>>>>>
>>>>>> --
>>>>>> Paul Whitham
>>>>>> Certified Dreamweaver MX2004
Professional
>>>>>> Adobe Community Expert - Dreamweaver
>>>>>>
>>>>>> Valleybiz Internet Design
>>>>>> www.valleybiz.net
>>>>>>
>>>>>> "Pizza Good"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>>I think what he is referring to
is the sql injection "prevention"
>>>>>>>code that was introduced in the
8.0.2 update. I read a bunch of
>>>>>>>issues related to the way
recordsets were coded and that a page that
>>>>>>>was coded lets say in ASP using
8.0.1 that had used QueryString
>>>>>>>values that were passed into the
recodset for filtering/searching no
>>>>>>>longer worked. I also read that
8.0.2 "broke" a lot of extensions
>>>>>>>because of the fix.
>>>>>>>
>>>>>>> I am still using MX2004, but I'm
curious if the supposed problems
>>>>>>> that came up with 8.0.2 could be
totally avoided if a programmer
>>>>>>> used Stored Procedures?
>>>>>>>
>>>>>>> Hopefully that makes sense.
>>>>>>>
>>>>>>>
>>>>>>> "Paul Whitham
AdobeCommunityExpert" <[email protected]> wrote in
>>>>>>> message
news:[email protected]...
>>>>>>>> Most of the change that was
made to the recordset in 8.0.2 was to
>>>>>>>> eliminate SQL injections.
What specifically are you refering to as
>>>>>>>> an issue now
>>>>>>>>
>>>>>>>> --
>>>>>>>> Paul Whitham
>>>>>>>> Certified Dreamweaver MX2004
Professional
>>>>>>>> Adobe Community Expert -
Dreamweaver
>>>>>>>>
>>>>>>>> Valleybiz Internet Design
>>>>>>>> www.valleybiz.net
>>>>>>>>
>>>>>>>> "Brendon"
<[email protected]> wrote in message
>>>>>>>>
news:[email protected]...
>>>>>>>>> Those that are beta
testing it would know - if they were doing
>>>>>>>>> serverside/sql related.
It wouldn't be speculation at all - in
>>>>>>>>> fact it would be pretty
straight forward to test.
>>>>>>>>> I'd be very surprised if
they havn't fixed the issue - in fact I
>>>>>>>>> thought it was fixed in
the 8.0.2 update, but I could be wrong.
>>>>>>>>>
>>>>>>>>> Brendon
>>>>>>>>>
>>>>>>>>> "Deaf Web Designer"
<[email protected]> wrote in
>>>>>>>>> message
news:[email protected]...
>>>>>>>>>> DW CS3 is not here
as yet.
>>>>>>>>>>
>>>>>>>>>> Only time will tell
once you have DW CS3 installed on your
>>>>>>>>>> platform and find
>>>>>>>>>> out if that is the
case.
>>>>>>>>>>
>>>>>>>>>> At this point, it is
all speculation without knowing the fact of
>>>>>>>>>> the problem.
>>>>>>>>>> Try to be a bit more
patient until official release of product
>>>>>>>>>> sometime this
>>>>>>>>>> spring.
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
> -
Code view not in synch with Design view (Dreamweaver CS3)
Hello All,
On my main work PC, I am running Dreamweaver CS3. When I am
working in split view (with both Design and Code view visible) when
I click on an element (say, a button) in Design view, the code view
automatically shows me the code for the element that I am working
on. That way, if I need to manually edit the code, I can click on
the Code view and make the appropriate changes.
On my laptop I am also running Dreamweaver CS3 However, when
I am working in split view and I click on a element in Design view,
my code view does NOT update itself and continues to show the last
bit of code I was working on in Code view. While this could come in
handy at times where i want design view and code view to show me
two different things, I mostly would like code view to update
automatically. Currently the only way I can get code view to update
on my laptop is to hit the "refresh design view (F5)" button. Is
there a way to do this automatically? Is this an option in
Dreamweaver preferences because I don't see it anywhere.
Thanks so much for your help.Ethereal_Mike wrote:
> Does the new version of Dreamweaver CS3 print the code
in color?
No. If you feel that it's an important enhancement that you
would like
to see in future versions, submit a feature request:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
The more people who request a specific feature, the more
likely it is to
be implemented.
David Powers, Adobe Community Expert
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
IE shows code from dreamweaver CS3 after uploading
Hi guys
Need help.
I have coded a site in Dreamweaver CS3 and after I upload through the automatic upload everything goes perfectly fine until I view the site online through Internet Explorer. Through all other browsers the website comes through fine ie Firefox, iron for PC and Mac etc. Its just the PC Internet Explorer that shows the actual code.
This is my code:
br />
• Resume / CV<br />
<br />
What it sows is the code of the dots (•) only.
The link is http://www.naissant.ca/becomeadesigner.html
Hope someone can help with the problem.
ThanksCan't see any code in IE7, IE8 or IE9 at the link you supplied.......maybe you have fixed it?
Correction I was looking for a bit more code. Change this • to •
or add semi-colon after code ; as shown below (not sure if this is genuine as I have'nt use that particular code to produce a bullet point)
• -
Has anyone experienced problems with DW CS3's code hints for
ColdFusion? I've installed the CF8 extensions, but the code hints
don't work properly in Windows XP (My Mac version works fine).
Basically, the "hints" for tags work, but only to an extent.
For example, I've found the code hints for CFWINDOW do not provide
the color picker for bgcolor in the style attribute. Funny quirks
such as that.are you implying that the newer versions of IIS might be more up to date than the cs3 dreamweaver and that is where my problems will arise?
I am not implying anything. I am simply wondering if the IIS is configured properly. Have you tried creating a basic static page and load it in your browser to see if it loads OK?
Obviously, without looking at your code it is almost impossible to say anything meaningful. However, I suggest post your query at this link:
<http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions&sta rt=0&numResults=30>
<http://tinyurl.com/7vk6ccw>
Hope this helps and Happy New Year to you. -
Using Spry how to stop Dreamweaver CS3 from Changing Code
Hi
I am using Dreamweaver CS3 to build/maintain a website www.ghoter.net. I started using Spry to insert data from an xml file as I need the data in the xml file to show up on several different pages, includeing the home page. The data in the xml file changes from time to time. This is working wery well. But I am having a problem with Dreamweaver automaticly changing a line of code in the html files every time I make a change to the html file. The line of code that is being changed is in the head of the program.
This is the line of code that is being changed: The xml's name is data-3.xml The date from the xml file goes at the top of the left collumn.
The good code is: var ds1 = new Spry.Data.XMLDataSet("data-3.xml", "customers/customer",{distinctOnLoad:true});
The above line of code is automaticly being changed to this below, which does not work:
var ds1 = new Spry.Data.XMLDataSet("data-3.xml", "customers/customer",<MM:BeginLock translatorClass="MM_SPRY" type="MM_SPRY_DATA_REFERENCE" orig="{distinctOnLoad:true}" ><MM_DYNAMIC_CONTENT DYNAMICDATA=1><MM:DECORATION HILITECOLOR="Dyn Untranslated Color">{distinctOnLoad:true}</MM:DECORATION></MM_DYNAMIC_CONTENT></script><MM:EndLock>);
I can replace the bad line of code with the good code just befor saving the html file and the good line of code will be saved with the file and the web page works as it should.
Any help would be appricated. Thanks
Jack BurnHi Jack,
I think (not sure though) that the Library Item is causing the problem. I never use the Library Item because server side includes are far more efficient and need less maintenance.
Have a look here http://foundationphp.com/tutorials/sprymenu/ssi.php
If you have PHP serverside scripting language, use DW to add serverside includes using PHP.
Getting back to your original problem, try without the Library Item and see if DW still changes the code.
I hope this helps.
Ben -
Dreamweaver CS3 Code Formatting broken
Hello, I am experiencing a huge deal of frustration with the
way Dreamweaver improperly formats code. In particular, the UL / LI
tags do not format correctly. Here is what I am trying to achieve:
<ul>
<li>
TEXT
</li>
</ul>
Now this pattern seems to correspond exactly to the preview
that you see when you go to Preferences > Code Format > Tag
Libraries, select the LI tag and choose Line Breaks: Before,
Inside, After and Contents: Formatted and Indented.
I have done this. I have also manually checked the .vtm file
in username > Application Data > Adobe > Dreamweaver >
Configuration etc.... and it corresponds to what I have set in the
Prefs.
However, when I use Design View to create the unordered list,
OR even if I just TOUCH a properly formatted list in Design View,
everything gets squeezed onto one line. I get this sort of thing:
<ul> <li>TEST</li> <li>MORE
TEST</li> </ul>
Here is what I have tried unsuccessfully to date:
1. Prefs > Code Formatting > Edit Tag Libraries...
2. Prefs > Code Format > UNCHECK Do not include a break
inside TD tag (I know, that's for TD, but I'm just trying
everything(
3. Prefs -> line breaks (tried Unix, Windows)
4. Commands > Apply Source Formatting (messes up my entire
code by putting everything inside the BODY tag on one line - in
other words, my entire page goes on one line now!)
5. Automatic Wrapping After Column 76 - this one is really
stupid, it just does a HARD break on each line so when you turn it
back off you have to go in and manually delete all these hard
breaks now...
There's a bunch of other small things I have tried, but
needless to say, nothing appears to be working.
Has no one else experienced this? Can you get Design View to
properly format UL / LI tags? If so, then something on my computer
is messed. But when I look at code generated by DW on some of my
co-workers' computers, they also have the same problem - I just
guess their tolerance for crappy code is higher than mine.
I'm using DW 9.0 (CS3) build 3481.
Please help! I have no hair left on my head to tear out and I
may have to go further afield.... ouch!
Thanks,
TomI just checked on DW CS4 and it's working as expected. If I
change my LI
entry in the Tag Libraries to Line Breaks: Before, Inside,
After and
Contents like you, I get your desired effect. Moreover, it
doesn't revert -
or worse if any changes are made, whether in Design or Code
view. I know
this doesn't help you verify or correct your CS3 issue, but
at least you
know there is an upgradeable light at the end of the tunnel.
Best - Joe
Joseph Lowery
VP of Product Management, WebAssist -
http://www.webassist.com
Author, Dreamweaver CS3 Bible -
http://www.idest.com/dreamweaver/
"tomaugerdotcom" <[email protected]> wrote
in message
news:[email protected]...
> Hello, I am experiencing a huge deal of frustration with
the way
> Dreamweaver
> improperly formats code. In particular, the UL / LI tags
do not format
> correctly. Here is what I am trying to achieve:
>
>
> TEXT
> </li>
>
>
> Now this pattern seems to correspond exactly to the
preview that you see
> when
> you go to Preferences > Code Format > Tag
Libraries, select the LI tag and
> choose Line Breaks: Before, Inside, After and Contents:
Formatted and
> Indented.
>
> I have done this. I have also manually checked the .vtm
file in username >
> Application Data > Adobe > Dreamweaver >
Configuration etc.... and it
> corresponds to what I have set in the Prefs.
>
> However, when I use Design View to create the unordered
list, OR even if I
> just TOUCH a properly formatted list in Design View,
everything gets
> squeezed
> onto one line. I get this sort of thing:
>
TEST</li>
MORE TEST</li>
>
> Here is what I have tried unsuccessfully to date:
>
> 1. Prefs > Code Formatting > Edit Tag Libraries...
> 2. Prefs > Code Format > UNCHECK Do not include a
break inside TD tag (I
> know,
> that's for TD, but I'm just trying everything(
> 3. Prefs -> line breaks (tried Unix, Windows)
> 4. Commands > Apply Source Formatting (messes up my
entire code by putting
> everything inside the BODY tag on one line - in other
words, my entire
> page
> goes on one line now!)
> 5. Automatic Wrapping After Column 76 - this one is
really stupid, it just
> does a HARD break on each line so when you turn it back
off you have to go
> in
> and manually delete all these hard breaks now...
>
> There's a bunch of other small things I have tried, but
needless to say,
> nothing appears to be working.
>
> Has no one else experienced this? Can you get Design
View to properly
> format
> UL / LI tags? If so, then something on my computer is
messed. But when I
> look
> at code generated by DW on some of my co-workers'
computers, they also
> have the
> same problem - I just guess their tolerance for crappy
code is higher than
> mine.
>
> I'm using DW 9.0 (CS3) build 3481.
>
> Please help! I have no hair left on my head to tear out
and I may have to
> go
> further afield.... ouch!
>
> Thanks,
>
> Tom
> -
Dreamweaver CS3 Connecting To SQL Express 2005
Hi Guys,
I'm having problems connecting
Dreamweaver CS3 to
SQL Express 2005, the error message that comes back is not
very helpful, "An Unidentified Error has Occurred"
Have any of you successfully connected
Dreamweaver CS3 to
SQL Express 2005 ?
Thanks
Jay> I'm having problems connecting
Dreamweaver CS3 to
SQL Express
> 2005, the error message that comes back is not very
helpful, "An
> Unidentified Error has Occurred"
>
> Have any of you successfully connected
Dreamweaver CS3 to
SQL
> Express 2005 ?
Yes, the connection string is not dependant upon the software
used to create
the website. Here's a couple of examples, or you can find
more at
http://www.connectionstrings.com:
Provider=sqloledb;Data Source=computer_name_or_IP;Initial
Catalog=database_name;UID=username;PWD=password
DRIVER={SQL
Server};SERVER=Computer_name\instance_name;DATABASE=database_name;UID=username;PWD=passwo rd -
Hi, have dreamweaver cs3 and i am a beginner. just started to use it again and want to have dynammic web pages. trying asp for dynamic pages using data from an access database. running into many parser and compiler errors when testing on localhost. Is there a problem with the accuracy of cs3 code written? has the syntax changed in the past few years? or must i spend significant time learning the basics of writing code to determine the accuracy of cs3?
an example: with asp.net vb there is an error in line one...
ctive Server Pages error 'ASP 0221'
Invalid @ Command directive
/PPG_asp/databasetest.asp, line 1
The specified 'Page Language="VB" ContentType="text/html" ResponseEncoding="utf-8" ' option is unknown or invalid.
have tried other formats with variable results; some get farther down the code;
would appreciate some help so i don't go nuts......thank youare you implying that the newer versions of IIS might be more up to date than the cs3 dreamweaver and that is where my problems will arise?
I am not implying anything. I am simply wondering if the IIS is configured properly. Have you tried creating a basic static page and load it in your browser to see if it loads OK?
Obviously, without looking at your code it is almost impossible to say anything meaningful. However, I suggest post your query at this link:
<http://forums.adobe.com/community/dreamweaver/dreamweaver_development?view=discussions&sta rt=0&numResults=30>
<http://tinyurl.com/7vk6ccw>
Hope this helps and Happy New Year to you. -
Dreamweaver CS3- Add this button code help
Hi, I have a problem in Dreamweaver CS3. The problem is that when I insert my add this button code, in to the codeing area, it does not work.
When I open my page in chrome, it simply says 'more shraeing services'. I will copy the code, in to this discussion. I would be greaftful if someone
can help me resolve this problem, so I can get the add this button to work on my site. The final bits of code are as follows-
<!-- AddThis Button BEGIN -->
<div class="addthis_toolbox addthis_default_style addthis_32x32_style">
<a class="addthis_button_preferred_1"></a>
<a class="addthis_button_preferred_2"></a>
<a class="addthis_button_preferred_3"></a>
<a class="addthis_button_preferred_4"></a>
<a class="addthis_button_compact"></a>
<a class="addthis_counter addthis_bubble_style"></a>
</div>
<script type="text/javascript">var addthis_config = {"data_track_addressbar":true};</script>
<script type="text/javascript" src="http://s7.addthis.com/js/300/addthis_widget.js#pubid=ra-4dd57258352fac8e"></script>
<!-- AddThis Button END -->
<!-- Place this tag where you want the +1 button to render -->
<g:plusone></g:plusone>
</div>
</form>
<script type="text/javascript" src="http://www.google.com/jsapi"></script>
<script type="text/javascript">google.load("elements", "1", {packages: "transliteration"});</script>
<script type="text/javascript" src="http://www.google.com/cse/t13n?form=cse-search-box&t13n_langs=am%2Cel%2Cml%2Cpa%2Cta%2Car% 2Cgu%2Cmr%2Cru%2Cte%2Cti%2Csa%2Cne%2Chi%2Cbn%2Cen%2Ckn%2Cfa%2Csr%2Cur"></script>
<script type="text/javascript" src="http://www.google.com/coop/cse/brand?form=cse-search-box&lang=en"></script>
<script type="text/javascript" src="http://www.google.com/cse/query_renderer.js"></script>
<div id="queries"></div>
<script src="http://www.google.com/cse/api/partner-pub-5783950232732081/cse/4522012035/queries/js?oe=UT F-8&callback=(new+PopularQueryRenderer(document.getElementById(%22queries%22))).render"></script>
</div>
<div align="center"></div>
</div>
<script type="text/javascript">var addthis_config = {"data_track_clickback":true};</script>
<script type="text/javascript" src="http://s7.addthis.com/js/250/addthis_widget.js#pubid=ra-4dd57258352fac8e"></script>
<!-- AddThis Button END -->
</div>
<script type="text/javascript">
<!--
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
</html>
Is there anything in this piece of code I should edit in order to make the add this button work? Many thanksA link to your page would be the best possible way to get help with this.
Code fragments don't tell the whole story.
Nancy O. -
Stop Dreamweaver CS3 rewriting my code
I dearly hope one of you lovely people can help me as this program is driving me nuts!
I need to find a way of stopping Dreamweaver CS3 from rewriting my code. I know it's a good thing for it to check for errors (unclosed tags, etc) and I have no problem with that, but what I need to stop is the way Dreamweaver keeps running closing tags on to the end of the previous line!
For example, I type:
<div>
<div>
<a href="link">
<img src="piccy" />
</a>
</div>
</div>
which is lovely and structured and, above all, easy to read, but as soon as I edit an element's propery, Dreamweaver makes it:
<div>
<div>
<a href="link">
<img src="piccy" /> </a> </div>
</div>
which is so annoying!
I've tried turning off all code rewriting in the preferences, but to no avail.
Please can someone save what little hair I have left?
Thanks in desperation
PeterI guess my problem is not directly related to yours after all, as I discovered a hack to live with DW's bad behavior in my case. I found this when I used DW to try to collapse the tags that were getting fouled up and seeing it not know exactly what to do.
The solution below tricks DW into thinking that my HTML tags are all nested properly, and it no longers rewrites the code in my CFC's function. Because nesting fixed it, I'm guessing the original poster's spacing issue is unrelated.
Nevertheless, here's what I did:
<cffunction ... >
<cfset var strHTML = "">
<!--- a memorable and always false condition --->
<cfset var hellfreezesover = False>
<cfsavecontent variable="strHTML">
<ul>
<li>first level
<!--- Trick DW into submission --->
<cfif hellfreezesover></li></ul></cfif>
<cfloop ...>
<!--- Trick DW into submission --->
<cfif hellfreezesover><li></cfif>
<cfif closeit>
</li>
<cfelse>
</cfif>
</cfloop>
<!--- Trick DW into submission --->
<cfif hellfreezesover><ul><li></cfif>
</li><!--- close last open li --->
</ul>
</cfsavecontent>
<cfreturn strHTML>
</cffunction> -
Dreamweaver CS3 and Coldfusion Errors
is anyone experiencing errors when using the coldfusion
inbuilt tools within dreamweaver cs3? I am getting errors when
using the insert record server beahaviour. Also i have noticed that
some sql code is not genrated correctly within cs3. This was not as
a problem in versions MX and 8.Have you posted this question in the Cold Fusion Forums?
http://forums.adobe.com/community/coldfusion
I don't use CF myself and the few CF coders I know have long since moved to Eclipse/ColdFusion Builder.
Nancy O. -
Adobe Dreamweaver CS3 with ASP coldfusion and PHP search?
I am working through Adobe Dreamweaver CS3 with ASP
coldfusion and PHP with the intent of creating a data base site
that primarily requires a search engine on the index page. The
search page in the book uses specific search criteria ensuring that
there will always be a match to the data base but I need to create
an input text field search engine. My Q, if there is no data within
the data base that match the variable, will it return with an error
requiring an argument in the code to respond to no matching data.
Hopefully there are comprehensive online recourses for these search
engines as they are so common. I am a complete newby to all aspects
of web development and code so it will need to be a thorough
explanation, an idiots guide. ANY HELP GREATLY APPRECIATEDRob,
Let me try to answer your questions, understanding that my
answers are laced with my experience and therefore my bias.
1. For the most part the SQL that you write for Access, MS
SQL or MySQL is going to be the same. I won't make that claim about
Oracle or PostgreSQL because I have limited or no experience in
those areas. To be sure when you head down the road with any DBMS
there are finer points on 'value added' features (to over simplify
things like MS SQL's Transact SQL), but for the most part when you
are pulling out, inserting or deleting records the SQL that you
write will be the same. In fact, I don't think I had to make any of
the SQL in the book different to deal with the back end db.
2. As for your host steering you away from MySQL, I don't
know why that would be. It is MUCH more stable and robust than
Access for web development. My research showed that you can use
MySQL just fine with ASP though that clearly wouldn't be
Microsoft's first choice.
3. A quick aside, the fact that you are building ASP on a Mac
would seem to indicate that you are developing on your production
server. That's never a good idea. Go local if you can. If you have
a newer Intel Mac you can use VM Fusion, Parallels or even Boot
Camp to run Windows in a virtual environment and develop there,
only moving your code to production when you are happy with it.
There is of course the fact that they two environments would not be
identical and you may need to change a few references, but it is
still a better practice than developing on your live site. Some web
hosts give you the ability to set up a subdomain. If yours does,
you could set one up with a duplicate of your site and develop
there.
4. Let me try to pull your 'rant-let' apart into two issue. I
begin with a question. I'm not sure what the Mac part has to do
with it. The primary language I work in at my day job is
ColdFusion. The majority of the most serious developers I know in
the CF world work on Macs. I am forced into the PC world because of
a cultural bias at the business school where I work. Having said
that, the only time I have felt there was ANY difference in the
tools, resources, choices I had was in any way affected by platform
was when Adobe still had not released Flex Builder 2 for the Mac.
Now that is behind us as well. This reaction of mine may be based
on the fact that Access never comes into play in the work that I
do. I regularly work with MS SQL and MySQL. (OK, so SQL Enterprise
Manager, the MS tool of choice to talk to MS SQL is Windows only,
but I only use that at the day job. But even there you can find
cross-platform, free tools like Aqua Data Studio to talk from a Mac
to MS SQL.) If I'm missing your point on the Mac, please let me
know. Since the advent of the Intel Mac I think it is hands-down
the best choice for a web developer. You can have Mac, Windows and
Unix all on one machine. It doesn't get any better (providing you
have the RAM :-)).
As for the security question, it is somewhat analogous to the
war on viruses and spyware. As the defenses get better, so do the
attacks. Most languages have developed functions for vetting user
input variables and best practices for building these things. It is
mainly a user education issue. When I took over the book you are
working out of, the one thing Jeffrey told me it needed was more
security. I did my best to put more in under the constraints of the
publisher. They didn't want the book to be any longer than the
previous version. I did my best to modify the code used to include
"string safe" functions and to add verbiage about the importance of
security. It was clear that I could not add as much as was needed
and I said so in the book. Much more is needed for a serious
treatment of the subject and not acknowledging that would have been
a disservice to the readers. I've been working as a developer for
over a decade and I don't know all there is to know about it. It's
a constantly changing field, just like all of web development. In
fact next week I'm going through a 2-day SANS Web Application
Security workshop in hopes of learning more. So at the risk of
sounding like an industry apologist, I don't think it's a
shortcoming of the development community. It is, as they say, "a
developing situation".
HTH,
Bob
http://bobflynn.info/ -
My first look at Dreamweaver CS3
Hi all, just got CS3 Web Standard install on my PC. The
installation was good with no problems, so far. Only open
Dreamweaver and Fireworks. I do not see any slow down from running
Dreamweaver CS3, and Fireworks CS3.
Good
I work with classics ASP daily for work, I noticed the code
view is high lighting correctly now, compare to DW8. The Design
display looks bad, but that is expected since my asp file is a
master file. This is a big plus for me.
Wondering Why
The Check CSS function did find two parsing errors, and a lot
of min-height in the style sheet. I right click on the error and
selected more info. DW did point out the problem but the more info
option only took me to the Home page of CSS Advisor, and not to any
articles related to min-height. I knew CSS Advisor existed already
before and have it in my Bookmarks. I was thinking it would take me
directly to a solution with out searching for it. Not a big deal,
just a point
Over all Dreamweaver CS3 looks similar to 8, I am very very
very please with the code highlighting for asp. I hand code
everything for work including SQL and database connection. It would
be nice to see a SQL code page under other for highlighting the
code.
Did anybody every get the email back for the free gift after
registering, I have not.
David Pearson
www.websalestool.comOn Tue, 24 Apr 2007 23:50:33 +0000 (UTC), "DEPearson"
<[email protected]> wrote:
>
> David Pearson
> www.websalestool.com
David, you might want to have an editor proofread your site.
On your
home page:
WebSalesTool is a suite of online communications tools that
work with
an organizations marketing team to provide innovative ways to
create
and manage their online marketing (things like websites,
email, sms,
text).
communications should be communication
organizations should be organization's
We offer the WebSalesTool suite through a network of
advertising and
marketing creative agencys who work directly with their
customers to
build comprehensive, results-driven online marketing
strategies and
campaigns.
agencys should be agencies
WebSalesTool is proud to say we have partnered with some of
the best
technology product and service companies in the business to
extend our
range of services to make your customers online marketing
even more
successful.
customers should be either customer's or customers' depending
on
whether you are talking about one customer or several
customers
I didn't look at any other pages.
Win
Win Day, Wild Rose Websites
http://www.wildrosewebsites.com
[email protected]
Skype winifredday
Maybe you are looking for
-
How Can I sync iTunes album artwork with album folders on my Mac
Small Issue, I just got a new macbook pro and uploaded copied the iTunes music folder from my PC, to an external hard drive then to the "music" folder in the Finder on my Mac. I then went into iTunes and added my library via the "add music" link (or
-
Expense (PR05) - Line item change report
Hi: We are looking for a report on the changes made in the trip line items after the trip was submitted, approved, transferred to FI (at every status). Basically if a consultant has submitted an expense and is approved by the manager, Then if consult
-
How do i find out or change my security question answers?
wht do i do to find out of change my secqurity question answers?
-
TS1389 how do you authorize this computer to play my songs
i cant seem to be able to play my music
-
HI!!!! Im learning BW and i have some questions, i want to know how i use an extractor, and what i have in count to use one, all this about the SD module, some one can help me? Thanks & Regards