Dreamweaver CS6 error message

I am teaching a unit to my Year 11 class, and we set up their websites as a group, all following the same steps to set up their root folder and start creating pages etc.  Out of the entire class, for some reason 5 students get an error message every time they try to save their site.  The error says "encountered incorrect argument".  It appears that the page is still saved in the folder, however you cannot preview it in a browser so it's obvious there is something wrong.  I have checked that the pages are saved as html files and that they are in the correct folder.  We are running Windows 7.  Has anyone encountered this before?

Have you tried clearing the cache http://www.dmxzone.com/go/16740/clearing-dreamweaver-s-cache/ or removing the personal configuration folder http://forums.adobe.com/thread/494811.

Similar Messages

  • CS6 Error message after download

    PS CS6 Error message after Download
    HP Pavilion dv7 Notebook PC
    Intel Core i7-2670QM CPU @2.20 GHz
    64 Bit OS
    Win 7 Home Premium SP1
    Question:  Should I open to use this, or erase and download again?  Wanted you to know as this is in Beta.
    Steps I followed:
    Found the download and installed
    I went through all steps directed by the download wizard, at the end of the
    process I received this message:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...
    -------------------------------------- Summary ------------------------------
    - 0 fatal error(s), 5 error(s), 0 warning(s)
    ----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
    ERROR: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x80070091.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1935.An error occurred during the installation of assembly component {43CC1B37-B20C-3EBC-9C04-F809989E4FD3}. HRESULT: 0x80070091.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Microsoft_VC90_CRT_x86: Install failed
    ERROR: DW050:  - Adobe Mini Bridge CS6: Install failed
    ERROR: DW050:  - Adobe SwitchBoard 2.0: Install failed

    Hi,
    This seems a third party issue.
    Please follow the instructions in the kb article at: kb2.adobe.com/cps/403/kb403969.html
    Regards,
    Ashutosh

  • Dreamweaver cs6 error 148:3

    Whenever I launch Dreamweaver CS6 I get a big message with an error code, "Error: 148:3"

    https://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

  • Error message on updates for CS6, error message on updates for CS6

    I've been having major issues with CS6 as well as CC - started with both versions of photoshop locking up, then totally refusing to open. Uninstalled both versions, just reinstalled CS6 but it is not opening unless I hit the shift key while initiating, then it refused to open a raw file so I went in to update to accomodate my camera and got these error messages. I have been without a working photoshop program for what seems like a very long time and this is beyond acceptable. Tech support was not helpful.
    Adobe Bridge CS6 5.0.2 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Extension Manager 6.0.8 Update
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Adobe Bridge CS6 5.0.2 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop 13.1.2 for Creative Cloud
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Photoshop Camera Raw 8.4(CS6)
    There was an error downloading this update. Please quit and try again later. Error Code: U43M1U49
    Adobe CSXS InfrastructureCS6
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200
    Dynamic Link Media Server CS6 1.0.1 Update
    There was an error installing this update. Please quit and try again later. Error Code: U44M1I200

    Hello Mitch4815,
    Thank you for reaching out for assistance with the New Feeds on your new Droid Bionic. I too own this device and I hope that you are as happy with yours as I am with mine. I've subscribed to the Reuter's Technology News on my Bionic so I can stay in the know on the latest and greatest rumors in the wireless world. Not only is it my job but I enjoy reading the speculation on the latest and upcoming devices. Needless to say I've had an experience that's similar to yours.
    When I received a subscription error, I had to do a factory data reset on my new Droid Bionic in order to successfully subscribe to the News Feeds. Although I do recommend that you try this, let's save this step as a last resort. Please try to remove the battery while the device is powered on & re-insert then power the device on. Afterwards, verify that you have a good 3G/4G signal, anything more than 2 bars. If you are still experiencing access issues then the factory data reset would be the next step. Here is a link on how to perform a factory data reset on a  Droid Bionic.
    http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=46649
    Of course you will have to reactivate your device after the factory reset. Prior to completing the reset I recommend verifying that your contacts are backed up on either backup assistant or on your Gmail account. Also, your pictures, videos, and music will be saved on the memory card so this info is not in danger. After you have completed the steps above, please reply to this message as your experience may help others. 
    Thank you for being the best part of Verizon Wireless.

  • Photoshop CS6 Error Message: Could not complete your request because of a program error.

    Photoshop CS6 version 13.0 v64
    On Mac OS 10.8.5
    Error Message: Could not complete your request because of a program error.
    Help! My CS6 photoshop was working before I upgraded my operating system to OS 10.8.5. I uninstalled photoshop and reinstalled it. Still doesn't work. I can't do anything in Photoshop, it comes up with that error everytime I try to open a file.

    Hi,
    Thanks for the information. I tried it and the message "Could not complete your request because of a program error." comes up when I open the program or try to do anything in the program. So when I went to edit preferences it pops the same message up. It won't let me do anything in photoshop. I am up to date on the operating system but that didn't fix it either. Any other ideas would be appreciated. I cant use photoshop on my main computer at all!
    Thank you!

  • CS6 Error message:  "A low-level exception occurred in: Blackmagic Design (recorder) "

    Hi,
    I have problem when install Adobe Pr Pro CS6 with DeckLink HD Extreme 3D
    My workstation have configuration as following:
    Supermicro workstation
    Super Micro x8DAL-i
    Intel Xeon E5645 2.40Ghz
    4GB DDR3-RAM x 2
    NVIDIA Quadro 2000 1GB Graphics
    250GB SATA 7200 RPM
    2TB 7200 RPM SATA x 2
    DVDRW
    Window 7 Pro 64bit
    I can capture with  Media Express but when I try to capture from CS6 with Decklink HD Extreme 3D,   the Error message:  “A low-level exception occurred in: Blackmagic Design (recorder) “
    Any one can help me urgent please
    Thank you,
    Dragonhn

    I have seen an issue with the latest Blackmagic driver and capturing with the current version of Premiere. I would use Media Express to capture and then just import the files.
    Eric
    ADK

  • CS6 Error messages on startup

    Intermittently, when starting up CS6 in Windows  7 x(64) I get 2 error messages.  I reply OK and CS6 starts up and runs error free. It happens very infrequently about 1 out of 15-20 startups.  I would like to eliminate the errors but have no idea how so thought I would pose the question here in case someone can help me out.  The error messages can be seen by viewing this jpg on Flickr with the screen captures.  Sorry I don't know how else to attach an image.  Thank you.
    Ralph
    https://farm8.staticflickr.com/7380/16258453408_ef64a1aae7_o.jpg

    Ralph,
    You are under a misconception about the nature of the forum:
    Just FYI, this is a user-to-user forum.  You are not addressing Adobe here, we are users just like you.
    By posting here, you are not "opening an incident"; you initiated a thread requesting help, and this thread will remain here and open forever.  You cannot "mark this problem solved and reopen a new incident report" later.  No such "incident" was opened by anybody anywhere.
    No one was tracking this thread and, for Adobe forums purposes, it makes no difference whether your issue was solved or not.
    The purpose of this forum is for all users, including future readers of this forum and of this thread, to benefit from all questions and all answer, not just the original poster.
    You are of course welcome to add more posts to this thread whenever you want, and also to open a new thread at your discretion.
    Hope to see you around here often.

  • ASP VBScript producing Dreamweaver Javascript Error Messages

    Do almost anything in Dreamweaver CS4 with ASP VBScript seems to produce javascript error messages.  can be a blank page, and you try to create a recordset... error box, error box, and then the code gets inserted but is not in the server behaviors panel.  i'm usually working in php and have never had this problem, but it's quite annoying to work that way... being forced to hand code a lot simple because dreamweaver isn't working correctly.
    warning one:
    the following javascript error(s) occurred:
    warning two:
    while executing findServerbehaviors in Recordset.htm, a JavaScript error occurred
    deleted .dat file and restarted dreamweaver, per some discussions via google... did nothing.

    anyone know how to fix this issue with dreamweaver?

  • Dreamweaver CS6 error "out of memory" as standard domain user; works fine as admin level user

    i have a recent issue come up: a Dreamweaver CS6 user has started getting an out of memory error as he uses the app. when i login as local admin level user, there are no problems. its a Windows 7 64bit domain client user, so wont have local admin rights.
    anyone come across this please.
    Danny Jacobs
    UBM
    London office

    This page might help:
    http://support.microsoft.com/kb/947246
    I would spend some time on the Microsoft site to find the exact error you're seeing. W7 is  known for its  permissions issues.
    If you don't have full rights to the machine, you'll want to bring up the problem with your IT guy/gal.

  • Dreamweaver MX2004 Error Message

    I am getting an error message when trying to save a Dreamweaver file that I haven't seen before. What is a "Sharing Violation"?  I am trying to save a typical page with copy, photo, etc. The message box says "A sharing violation has occurred while accessing C:\ ..."
    Any ideas would be appreciated.

    I'm with John on this one.  That's an OS error.  If it happens with the photo perhaps your user account does not have sufficient privileges to access the photo at its current location.  Try moving it somewhere else (eg: where your site files are) and see if that helps.  I have a feeling that may not be successful either though if it is a sharing violation.

  • Illustrator cs6 error message of   Could not complete this operation. There are no user slices

    i am using a mac OS 10.8. was slicing a document and saved the slices. works great. now i am trying to save a totally different document in which i am not using any slices and i am getting an error message.
    how do if fix this. it's a real pain in the ***.

    I had same issue today.
    Here was my solution, which does not seem obvious, but resolved.
    When I experienced the error in a new document, I realized that I changed my settings to PNG vs JPEG in the PREVIOUSLY used document and did indeed change "ALL SLICES" to "ALL USER SLICES".
    Since this document, when saving as a JPEG or PNG automatically defaulted in the background to the "ALL USER SLICES" it couldn't find them..... there were no slices, it was just ONE ART BOARD without any slices.
    I opened up the PRIOR DOCUMENT. Saved again and changed "ALL USER SLICES" back to "ALL SLICES". Saved. Closed.
    Then opened up my CURRENT document that I experienced the error and WHALLAH it worked.
    Even though the document said "ALL SLICES" all along, in the background there was a brief ADOBE GLITCH remembering the previous documents settings. It happens. Resolved.  

  • FW CS6 Error message: An error occurred. This command requires an active document.

    Hi,
    I've been seeing the following message while saving active documents recently: An error occurred. This command requires an active document. My document does indeed save.
    I'm wondering if a recently-installed (and much-loved) extension could be the cause?
    Has anyone else seen this?
    Thanks!
    --Lucija

    As far as similar problems, I recently opened Fireworks 8 to test the File Management button (the Put command in particular) and found that it triggered an alert message normally produced by Aaron Beall's "Deform to Path" command:
    I tried closing the Path panel, and the alert message was still triggered. (I do have that command also available within the Commands menu, but I'm not sure what was going on there; however, since I don't use Fireworks 8 much anymore and never use the Put command, I decided to leave it alone.)
    Currently, I use Fireworks CS6. Several months ago, I noticed a "migrating panel" bug, where panels within the default configuration had been mysteriously swapped for one another: The Color Palette panel had been replaced by Lorem Ipsum, while the Path panel had gone missing, replaced by the Color Palette panel—bizarre behavior, to say the least. I tried reselecting a default Workspace (as well as a saved one), but it had no effect on the problem. I still haven't taken the time to diagnose and fix the issue, but I suppose it might have somehow been triggered by the Lorem Ipsum panel, which was a custom installation.

  • Photoshop CS6 error message

    What is error U44M1P6 when applying the latest update to Photoshop CS6?

    Hi,
    Thanks for the information. I tried it and the message "Could not complete your request because of a program error." comes up when I open the program or try to do anything in the program. So when I went to edit preferences it pops the same message up. It won't let me do anything in photoshop. I am up to date on the operating system but that didn't fix it either. Any other ideas would be appreciated. I cant use photoshop on my main computer at all!
    Thank you!

  • Dreamweaver 8 error message when applying command

    I need some help, I have a Mac OSX with system 10.4.8
    When I used to use Dreamweaver MX 2004, I never used to have
    no problems when I used to save steps through the history option
    and apply them as a command.
    I removed all my extensions, and installed twice!!
    But with dreamweaver 8 I am getting this message everytime:
    "While executing onLoad, the following javascript error(s)
    occured:
    At line 12 of file "Macintosh HD:Applications:Macromedia
    Dreamweaver 8:Configuration:Commands:kk.htm":
    The functioin detachfromTemplate() is currently
    unavailable
    Help please

    Did you remove the WinFileCache file?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "maltapolitics" <[email protected]> wrote in
    message
    news:eqrptm$62$[email protected]..
    > Still wont work, when I install dreamweaver MX 2994 it
    works fine, but
    > Dramweaver 8 still gives me problems.
    >
    > I disabled all extensions, and even started a fresh
    website, and it still
    > is
    > giving me the same error
    >

  • Opening a CS5 project in CS6 - Error message

    HI all, is it meant to be possible to open a cs5 project in cs6? I just tried and got this error:
    the project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with this sequence type
    Many thanks

    Check the info in this thread:
    "This project contained a sequence that could not be opened".

Maybe you are looking for