DreamWeaver MX 6.1 auto-expands some folders

Ok still runs DreamWeaver MX 6.1, and although I seen the bug
I am about to describe before, it has been stable for a few years
until now when I moved web content from one drive to another and
then went into DreamWeaver and changed site definition, only having
to change one letter, the drive letter as folders stayed the same.
No however DreamWeaver auto expands some folders, not sure
why not all, and it takes two clicks on the "minus" icon to
collapse the folder. However as soon as I switch to another
application and then back to DreamWeaver it expands again, or if I
switch to another site within DreamWeaver and then back to the same
site again.
What gives? This is REALLY annoying, because one site has
like a 800+ sub folders which caused a delay before showing and
ready to accept new input or menu commands.

"Mister Mustard" <[email protected]> wrote in message
: I'm not clear on what you are saying; is that speculation
or did you
: do what I said (without first finding Murray's post) and
that was the
: result? If the latter, you followed only part of my
suggestion and
: what's thebig deal about reinstalling an app?
Mister Mustard -
Reinstalling should be a last resort. I know you told the OP
to back up -
just be a bit careful about your suggestions to these type of
questions.
What should the poster backup, what are they liable to lose
if they do have
to install etc etc....
You may recall in part what you have read before about a
solution, it may be
better to find the message and post a the link to it instead,
then it's up
to the poster whether they follow the advice if they do a bit
of research
themselves.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.DreamweaverResources.com
|Tutorials|SEO |CSS Templates
http://www.csstemplates.com.au
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver

Similar Messages

Bridge auto expands from one monitor to two when accessing folders

When I try to rename a folder Bridge auto expands from one monitor to two monitors and doesn't let me change the name. If I try to delete a photo it auto expands, lets me delete the photo but remains expanded across two monitors. This is a new experience I have had Bridge CC for about a year and this activity started on Friday. How do I prevent Bridge from automatically expanding across the two monitors?

A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Cannot expand public folders in Outlook but can in OWA

Hi All,
I have a problem which I hope some one might be able to shed some light on. Firstly, the environment is Exchange 2010 (v 14.01.0438.000) and all clients use Outlook 2007. We have one user in the organisation who recently noticed that he cannot expand public
folders. He had been able to do so a couple of months back but could not pin point the time it stopped working. The error received reads :-
"Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to Microsoft Exchange has failed."
I thought that this might be a permissions issue but this particular user can access the public folders via OWA. Also, my AD account was a copy of this user's and I can access public folders without issue.
I have tried the following so far :-
Tried running Outlook in safe mode
Tried recreating the Outlook profile.
Tried creating a new Outlook profile on a different client PC.
Tried running Outlook in cached an online modes.
Ran Exchange BPA and found no issues.
Checked ADSIedit for old administrative groups left over from past migrations.
used the test-outlook connectivity cmdlet from powershell which ran it's tests successfully.
This user originally set up all the public folders and was still listed as the owner of all of them.
Tried creating a new public folder.
Checked for an Outlook update that had caused a similar issue.
All the above failed to progress the situation. I have come across posts online that sound very similar, one stated that a Microsoft tech had found a permission that wasn't correct but didn't list which permission and the other related to an update to Outlook
that had triggered it. I can confirm it's not the update and I have checked permissions in the public folder management utility in Exchange. Also, my AD account is a copy of his and I can access the folders without issue.
I have also considered what may have changed on the network recently. The only major change has been a new admin password but I cannot see how that would be relevant.
Any help would be hugely appreciated!
Thanks in advance!

Hello John: We are having the exact same issue. Thank you for the great description, it hits the nail on the head for an issue that is tough to explain. Did rebuilding the mailbox fix the problem? We thought a next step would be to create a new
AD profile for the user all together, although replacing the user herself would be easier for us. She obviously caused this problem and will most likely cause us more problems that might be worse if she keeps clicking and sliding on every thing that
is shiny to see what it does..
I can only surmise that CaRa ChEn has decided to "better understand customer views on social support experience" elsewhere. I think the only logic for the mailbox suggestion would be "grasping for straws" and it is the only thing you have not tried
so far. (Other than replacing the user). Pactera employees get points for being the first to reply to a question and the first to have a suggestion marked as helpful as well as the sheer quantity of replies to the forums that are made. High
value is placed on moving posts to different forums as well so I thought I would ask quick before the thread gets shoveled somewhere else.. If she needs help with the interview project she can find plenty of my thoughts here in the community.
Thanks again, and we will reply back if replacing the user (account) does NOT solve the problem, otherwise one can assume we are happy campers again our new employee and remember just because it is blinking does not mean you should click on it. :)
Best regards,
RickkEE

Expand all folders in the detailed navigation by default on click of Role

Hi All,
I have a requirement on expand all the folders in the detailed navigation by defalut when we click a Role in the Fist level navigation.
Please have a look about our requirement as mentioned below.
->Role1(First Level Navigation)
   ->Wokset1(Second Level)
       -> Folder1(Detailed Navigation entry Folder)
              -> Folder2
                   Page1
                   Page2
              ->Folder3
                   Page3
                   Page4
              -> Folder4
                   Page5
                   Page6
When the user clicks on Role1 then automatically all the folders in the detailed navigation should be expanded by default then user could see all the pages displayed in all folders. currently the functionality is collapsed all the folders by default in the detailed navigation then user has to expand the folders manually.
Regading this issue, i had seen couple of threads on the same but getting confusion what is the exact solution for the solution.
in those existing threads some people has mentioned that need to change code in the lightdetailnavigation.par or some other mentioned that it is not worked out even do the required changes in the code of light detail navigation part file. there is no clarity in the existing threads for getting the exact solution . please let me know what are the properties needs to be changed at folder level or workset level to make sure all the folders should be expanded by default in the detailed navigation??
Currently we are using portal 7.0 version.
Any pointers in this regard would be the great help to us??
Thanks in advance.
Regards,
PortalUser
Edited by: PortalUser100 on Jan 22, 2011 10:15 AM

Hi,
To expand all the folder by default, we need to set the property of the detailed navigation tree.
Open your framework page in the content administration.
Check on the detailed navigation check box and click on the properties button.
In the properties, set the value of initial state= OPEN .
This will expand all the folders by default.
Hope you understood.
Regards
Nishant

Auto expand of layout or reports

Hi, I have developed a report which prints a bill on a letterhead, as a developer i designed it in such a way that the contents do not cross beyond one page (keeping in mind the maximum data) but when the user selects some data its shrinks(i made the frames vertical variable) but i wish to auto expand so as to fit the page entirely (putting anchoring object make it look empty in places). Does someone has a solution.
Regards
Melvin

You could also set the elasticity fpr fileds inisde the frame and try
Thanks
The Oracle Reports Team

Option to expand/collapse folders inside of folders?

Some folders on my Mac when the open do not have the ability to expand/collapse, there is no triangle. How do I get this option to display?
Thanks.

With the folder open, from the Finder Menu Bar > View > Show View Options > Arrange By: None > Click "Set as Default"

Auto Expand Html table when we paster data from Microsoft Excel sheet

hi,
I need copied data to my Html table.
Actual requirement is like that when i copy selected rows with selected columns from Microsoft excel sheet and press "ctlr v" on my jsp page then table on jsp must be auto expand as data in excel sheet.
Take an example.
I copy 4 rows with 3 columns from excel sheet.
I have JSP page with 1 row and 3 columns.
when i press "ctrl v" on first cell of my jsp table then table should be auto expand to accommodate 4 rows of excel sheet.
here i have some of the code which is near to this, this code just copy past only one row, but i need multiple rows.
If need then please refer below code and if possible then give me the solution to auto expand HTML table on JSP
Code to copy paste cell in to HTML Table
<form>
<table>
<tr>
<td><input type="text" name="t1_0" onchange="formatCells(this.value,'t1')"></td>
<td><input type="text" name="t1_1"></td>
<td><input type="text" name="t1_2"></td>
<td><input type="text" name="t1_3"></td>
<td><input type="text" name="t1_4"></td>
</tr>
<tr>
<td><input type="text" name="t2_0" onchange="formatCells(this.value,'t2')"></td>
<td><input type="text" name="t2_1"></td>
<td><input type="text" name="t2_2"></td>
<td><input type="text" name="t2_3"></td>
<td><input type="text" name="t2_4"></td>
</tr>
</table>
</form>
<script type="text/javascript">
function formatCells(xls,group){
var arrGroup = xls.split(/\t/gi);
for(var i=0;i<arrGroup.length;i++){
document.forms[0].elements[group + "_" + i].value = arrGroup;
</script>
Thanks
Chintan Patel

Hi Ross,
>> In our testing environment using both Excel 2010 and 2013 this file is imported successfully, so we cannot replicate.
I suspect it is caused by the difference of web server security settings.
KB: Error message when you use Web query to a secure Web page (HTTPS://) in Excel: "Unable to open"
Hope it will help.
By the way, this forum is mainly for discussing questions about Office Development (VSTO, VBA and Apps for Office .etc.). For Office products feature specific questions, you could consider posting them on
Office IT Pro forum or Microsoft Office Community.
Regards,
Jeffrey
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Build an Auto-Expanding Select list

Hi everyone,
I want to know if it's possible How to Build an Auto-Expanding Select list ?
I saw some discussions which tell us to use Jquery to acheive this. Is it the only solution ?
I want a solution that it is easy to implement.
Thanks in advance. Bye.

Hi,
Not sure what you've seen before, but anywhoo:
In my select list, i set element attributes of :
style="min-width: 130px"Just because some of the smaller values were getting truncated.
Then I add this onload javascript code:
$('#P10_AUTO_EXPANDING').change(function(){
$(this).width($('option:selected', this).text().length*10)
})It's not perfect for getting the right size (i.e. i think it increases exponentially, but you can play around with the multiplier)
Which you can see: http://apex.oracle.com/pls/apex/f?p=45448:10:
Edited by: trent on Dec 15, 2011 10:35 AM
Probably best to add this line of code:
$(this).width($('option:selected', this).text().length*10)
into a dynamic action for a change event of the item, of which the true action is to execute javascript code.

Bridge CC constantly re-caching some folders (again).

My new Bridge CC on Win 7 is repeatedly re-caching thumbnails on some folders. Not all folders, just some, and that is my mystery. I have been doing extensive tests and yet can't determine what it is about some folders or their contents that cause a constant re-cache.
Would like to know if anyone else is seeing a re-caching problem with Bridge CC, and if you have a clue why?
I have tried all the usual suspects, short of a complete re-install. I've updated, I've trashed preferences, I've tried many different image folders and contents. I've set my cache size to the max and put it on a disk with tons of room. I've completely deleted the cache and started over. Can't find any rhyme or reason.
This problem is similar to one I and several other people had with CS6 many months ago.
http://forums.adobe.com/thread/1024624?start=0&tstart=0
http://forums.adobe.com/thread/1007560
Different people reported different causes and cures. In my case, the cause was the presence of layered TIF files in a folder. Disabling TIF support made it go away. The final cure for me was the last update to CS6 Bridge.
But my current CC Bridge cache problem is not the same. Layered TIFs are definitely not the cause. It appears to happen only on folders with raw files, but not all of them. It does not happen on different folders containing tif or jpeg versions of the same files. Something is making Bridge think the files in a folder have changed when, in fact, they have not.

I have less sympathy. The bug has been documented for several years, and no one seems to have taken ownership of the problem. As it only affects Bridge, it appears to automatically become very low priority. The only reason the first bug was fixed was because I isolated the cause and then badgered Adobe. So, I reckon the only way to get the second bug fixed is if us users can find a way to recreate the symptoms reliably.
I have about 40,000 images in scores of folders, organised by century, year and month-date. I'd say more than 3/4 of the folders are unaffected by the bug. The folders that are affected tend to regenerate up to 3/4 of the thumbnails. Clearing the cache for the folder can sometimes reduce this fraction. As you noted, copying them to a new location can remove the problem, but this is not necessarily permanent, and it often returns. Simply copying the files to another computer doesn't work. It seems to be a problem with the cache and the Bridge database.
I've spent several hours trying to diagnose the criteria which triggers the bug. The ONLY thing which seemed to help was to untick the "Enable Lens Profile Corrections" box. It killed the repeats dead on my system. My guess is that this bug is more likely to affect people to change Camera Raw defaults to enable this feature and process most or all of their images, as they will have a very high percentage of thumbnails subject to LPCs in every folder. Like the 6.1 bug, the 7.3 bug probably needs some other condition to trigger the cache discrepancy which causes the regeneration.
So, my workaround was to remove LPC from all of my non-shortlisted images, and from Camera Raw defaults. Now, I only use LPC on my best images, and only if necessary. It seems to have cut down the drain on resources, but the better my photos, the more work Bridge must do! ;-)

How to hide some folders in a woprkspace from some external users?

Hi
We manage a workspace that has both Internal external users. We have a requirements in a way that external users can only see some folders they have access to. What is the best way to accomplish.
I reviewed an article in "How to" section which describes how to use ACLS to hide some folders from certain users (https://beehiveonline.oracle.com/External_06_howto.html).
But this process is cumbersome as we need to go to exh folder and revoke permission for selected users. And also if we add any new folders to the workspace that folder will default be accessible to the external users also. We want by default any new folders do not have access to this group of users except the ones we provide access to.
How can we do it?
Regards
Ram Uppu

Ram,
We have a new process which is much more easily used - the https://beehiveonline.oracle.com/External_06_howto.html page has been upfdated to show the new process.
phil

I moved the mobilesync path where my backups should be stored. However, since then I moved some folders around which I think is the source of my error. I can no longer backup my iphone. How do I fix this?

A while ago, I moved the mobilesync path so that it would stop trying to backup onto my C drive. However, since then I moved some folders around which I think is the source of my error. I can no longer backup my iphone It just tells me that the backup is corrupted. When i go to preferences, devices, and look under backups it is empty. How do I fix this?

Howdy there mjspace1994,
It sounds like you are unable to backup your phone after moving the mobile sync folder from its default location. If moving it back manually does not resolve the issue, I would next use either of the following articles to remove iTunes from your computer and then re install it. The articles outline the proper order to remove them in, and step by step instructions:
Remove and Reinstall iTunes and other software components from Windows XP
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8
Thank you for using Apple Support Communities.
Take care,
Sterling

How do I keep layers from auto-expanding in the Layers Palette?

Hello all. I'm working on a rather complex piece of artwork in Illustrator CC with the latest Mac OS, with several objects on each layer.
Whenever I click an object, its layer in the Layers palette auto-expands, pushing all of the main layers off of the edge of the palette. I then have to click the little arrow to collapse the layer so I can see all of the other layers and (quickly?) get to the one I need.
I am using a Magic Trackpad (don't ask) so this task is particularly arduous, as the cursor is often somewhat difficult to maneuver when attempting to target small UI elements. My display height is only 1050 px, so naturally I would rather not make the layer thumbnails any smaller (25 px.)
Is it possible to disable or defeat the auto-expanding behavior? Any help would be kindly appreciated. Thanks!
Edit placed in bold

Checking the Layers>Top Level Only boxes in the Layers Panel Options palette did not work to stop the triangles/arrows in the Layers palette from turning themselves down when an object is selected that is part of a sublayer.
(This is on Mavericks 9.1 using CS6.)
These two checkboxes are in the Thumbnails section of Layers Panel Options and does not affect the arrow animation on my Mac. I haven't been able to find any combination that stops this behavior, including changing the "Show Layers Only" checkbox.
FEATURE REQUEST: Adobe, an OPTION for this please? We don't all work by targeting sublayers in the layers palette, especially those of us who spend most of our time pawing through someone else's work/setup.

Mac wont mount disk images, and fails to auto detect some usb devices.

for some reason, all of a sudden, my mac won't mount disks. even disks I know in the past have worked.
also, it wont auto detect some external devices. especially jump drives and hard drives and audio interfaces. It has to be rebooted with the the devices connected.
I know its not a hardware problem, because everything runs smooth in windows on this computer.
I did some extensive cleaning recently, and installed a lot of new stuff, but i don't know what could be causing this.
any help would be greatly apreciated!

This USB faq may help.
An SMC reset may help you mount disks.
 DALE

I have shared some folders and trying to connect from my android

i have shared some folders and trying to connect from my android(using esf file manager) and when I want to connect it asks my user name and password. Where can i find them on mac?
i have tried to enter my mbp name and my password but it doesn't work.

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, and filling out and submitting this form.
(96550)

"Date Added" values changed to be identical in some folders

Hi,
I normally sort my work files (mostly .ppts) by "date added" to help me keep track, this usually works fine. I have the date added column showing in Finder and set the Folder Options to sort by date added.
I noticed today that in some folders (but not all) the date added value has been re-set by the system to be a random date (eg 30 Jan 2015 15:28 for one folder), and the date and time added is the exact same for all the files. Obviously this means I can't sort them anymore. I was wondering why this has happened and if it can be fixed as it's a really annoying and potentially serious issue.
Running Yosemite 10.10.2 on a mid-2012 MBP.
Thanks

Hi Subha,
You can assing default values to the Variables...Fiscal Year2008; Version100...etc. so that the user need not input all the variables.
I am not sure whether you can assign a function--"on selection" of variables. For better control It would be prudent to advise users to execute a function (if need be embed a SAVE function with in the sequence) on press of a button.
Regards
Srinivas

DreamWeaver MX 6.1 auto-expands some folders

Similar Messages

Maybe you are looking for