Option to expand/collapse folders inside of folders?

Some folders on my Mac when the open do not have the ability to expand/collapse, there is no triangle. How do I get this option to display?
Thanks.

With the folder open, from the Finder Menu Bar > View > Show View Options > Arrange By: None > Click "Set as Default"

Similar Messages

Expand/collapse folders in CS4 ?

Searched the forum and through offline help and tried every icon in the panels but can't find this.
In DW CS4 how do you expand/collapse all folders in a site automatically ? Either in panel view or expanded full screen view ?
Or do you have to open/close all folders individually ?
Thanks, Tim R

Or do you have to open/close all folders individually ?
Yes.

Outlook 2013 - Online Archive folders do not remember expand / collapse

For our QA group, we have just upgraded them from Office 2010 to Office 2013 SP1. We have one user that noticed something. With Outlook 2010, the client would remember which folders he had expanded or collapsed under his "Archive" (the online archive
generated by the Archiving feature of Exchange server). However, once we upgraded him to Outlook 2013, this is no longer true. Now, the "Online Archive" header is fully collapsed when he open Outlook every time.
To test, I created a small folder structure with some items in my own "Online Archive" section and was able to reproduce this behavior. Outlook 2013 will remember which folders are expanded or collapsed for the folders in my Inbox but not for the
folders in my Archive. Is there a way to have Outlook 2013 remember the expand / collapse settings for the Archive?

Hi,
I'm marking the reply as answer as there has been no update for a couple of days.
If you come back to find it doesn't work for you, please reply to us and unmark the answer.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How do I remove expand / collapse icon for JTree empty folders

Hi
I am using a JTree as a file system browser. I use DefaultMutableTreeNode nodes.
I have a problem with empty folders.
Empty folders show the expand / collapse icon, leading the user to believe there are sub-directories. When the user double-clicks the folder, the expand / collapse icon goes away. This is a "haha-gotcha" glitch that I really don't want my users to have to continually deal with.
So, how might I get my JTree to not show the expand / collapse icon for empty folders?
Thanks
Wayne

Maybe I can use the FileSystemView isTraversable(File f) method in my TreeCellRenderer class to check if anything is in the directory.
But I still need to know how to disable the expand / collapse icon for such a node.

I do not have a delete option for files or folders in Adobe Creative Cloud

I do not have a delete option for files or folders in Adobe Creative Cloud
im looking and looking....
im stumped.....
4 weeks now....
kai

HOW TO DELETE FILES or FOLDERS or Assets from Adobe Creative Cloud Brouser/Web Portal By: Kai Buskirk rev:130626
Adobe now burried deleting or trashing unwanted iteams files or folders in the Archive section of your creative cloud brouser/web portal.
Note!! - No longeer is there a standard TrashCan icon or simple Delete button... its burried in the archive sector: but why i ask?
An archive is an accumulation of historical records, or the physical place they are located.[1] Archives contain primary source documents that have accumulated over the course of an individual or organization's lifetime, and are kept to show the function of that person or organization. Professional archivists and historians generally understand archives to be records that have been naturally and necessarily generated as a product of regular legal, commercial, administrative or social activities.
In general, archives consist of records that have been selected for permanent or long-term preservation on grounds of their enduring cultural, historical, or evidentiary value. Archival records are normally unpublished and almost always unique, unlike books or magazines for which many identical copies exist. This means that archives (the places) are quite distinct from libraries with regard to their functions and organization, although archival collections can often be found within library buildings
A person who works in archives is called an archivist. The study and practice of organizing, preserving, and providing access to information and materials in archives is called archival science. The physical place of storage is sometimes referred to as an archive repository.
To delete files folders or individual assests in the current incarnation of adobe creative cloud brouser/web portal rev:130626
1 - Check mark the box on left and select files or folders you would like Deleted/Trashed and move them to the ARCHIVE folder location inside your adobe creative cloud brouser/web portal....Then navigate to the ARCHIVE SECTION
2 - Once the files or folders you have check marked are moved to the ARCHIVE folder location you can select them for Permanant Deletion (Trash)
ps: you can also restore them......if you so choose....
3 - in case you missed this step after selecting/checking the files or folders in the ARCHIVE folder there is a small Triangle Selector drop down that will reviel the Permanently Delete option.... clicking that is the point of no return i think..... so do not be misled my the use of the term ARCHIVE.... DELETING PERMANANTLY IS DELETING YO!
4 - OK DONE NOW YOU GOT IT .....
Good Luck Happy House Cleaning.....
Wamest Blessings,
Kai Buskirk
Message was edited by: [email protected] rev: 130626

How do I collapse folders in mail?

I organize my mail into separate folders (e.g - folders for each customer). I find this to be a great way to find emails for a given customer regardless of the subject line. Unfortunately there does not appear to be any way to collapse folders for easy navigation in the mail client on an iPhone. Is there anyway to collapse folders?

Hi I put out the same request and so far the answer seems to be that iPad does not have the ability to collapse and expand the folders.....yet.....I hope Apple will get this feature added soon. I have business folders with many clients and sub-folders within them and the list is growing. I use Gmail and it works fine when I'm on my PC, but not with the iPad.

Can you expand the folders in event?

I just purchased a mac for the 1st time and am organizing photos in iphoto. Is there any way to "expand" the folders under the events tab on the left side so i can easily drag and drop photos to other folders?

No.
Try this instead:
Flag the photos you want to move. Switch to Events view. Select the Event you want as a destination then go
Events -> Add Flagged Photos to Selected Event.
As you are new you might want to consider Albums as a much more flexible tool.
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 50k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.

Expand all folders in the detailed navigation by default on click of Role

Hi All,
I have a requirement on expand all the folders in the detailed navigation by defalut when we click a Role in the Fist level navigation.
Please have a look about our requirement as mentioned below.
->Role1(First Level Navigation)
   ->Wokset1(Second Level)
       -> Folder1(Detailed Navigation entry Folder)
              -> Folder2
                   Page1
                   Page2
              ->Folder3
                   Page3
                   Page4
              -> Folder4
                   Page5
                   Page6
When the user clicks on Role1 then automatically all the folders in the detailed navigation should be expanded by default then user could see all the pages displayed in all folders. currently the functionality is collapsed all the folders by default in the detailed navigation then user has to expand the folders manually.
Regading this issue, i had seen couple of threads on the same but getting confusion what is the exact solution for the solution.
in those existing threads some people has mentioned that need to change code in the lightdetailnavigation.par or some other mentioned that it is not worked out even do the required changes in the code of light detail navigation part file. there is no clarity in the existing threads for getting the exact solution . please let me know what are the properties needs to be changed at folder level or workset level to make sure all the folders should be expanded by default in the detailed navigation??
Currently we are using portal 7.0 version.
Any pointers in this regard would be the great help to us??
Thanks in advance.
Regards,
PortalUser
Edited by: PortalUser100 on Jan 22, 2011 10:15 AM

Hi,
To expand all the folder by default, we need to set the property of the detailed navigation tree.
Open your framework page in the content administration.
Check on the detailed navigation check box and click on the properties button.
In the properties, set the value of initial state= OPEN .
This will expand all the folders by default.
Hope you understood.
Regards
Nishant

DreamWeaver MX 6.1 auto-expands some folders

Ok still runs DreamWeaver MX 6.1, and although I seen the bug
I am about to describe before, it has been stable for a few years
until now when I moved web content from one drive to another and
then went into DreamWeaver and changed site definition, only having
to change one letter, the drive letter as folders stayed the same.
No however DreamWeaver auto expands some folders, not sure
why not all, and it takes two clicks on the "minus" icon to
collapse the folder. However as soon as I switch to another
application and then back to DreamWeaver it expands again, or if I
switch to another site within DreamWeaver and then back to the same
site again.
What gives? This is REALLY annoying, because one site has
like a 800+ sub folders which caused a delay before showing and
ready to accept new input or menu commands.

"Mister Mustard" <[email protected]> wrote in message
: I'm not clear on what you are saying; is that speculation
or did you
: do what I said (without first finding Murray's post) and
that was the
: result? If the latter, you followed only part of my
suggestion and
: what's thebig deal about reinstalling an app?
Mister Mustard -
Reinstalling should be a last resort. I know you told the OP
to back up -
just be a bit careful about your suggestions to these type of
questions.
What should the poster backup, what are they liable to lose
if they do have
to install etc etc....
You may recall in part what you have read before about a
solution, it may be
better to find the message and post a the link to it instead,
then it's up
to the poster whether they follow the advice if they do a bit
of research
themselves.
Nadia
Adobe® Community Expert : Dreamweaver
http://www.DreamweaverResources.com
|Tutorials|SEO |CSS Templates
http://www.csstemplates.com.au
http://www.adobe.com/devnet/dreamweaver/css.html
CSS Tutorials for Dreamweaver

Collapsing Folders

I have set up my iPad to work with Microsoft Exchange e-mail, however I have a large number of folders. The iPad does not seem to allow me to collapse these folders. Instead I need to scroll through them all.
Does anyone have a solution to this?

This is my pet peeve about Apple. They people who design the UI for any Apple related product assume that everyone else in the world is a moron.
So the fact that the whole point of having folders in mail is to organize it, escaped them. So now everything is ALWAYS open.
I would suggest that this is because the people who design the apple related UI are morons themselves. This is a sad realization but the number of idiotic UI decidsion made by the Apple UI idiots, sorry - experts, is staggering.
So, to summarize - you cannot do any of the trivial expand/collapse of folders because the mail UI designers are idiots.
Simple.

Website file tree - cannot collapse folders

Viewing the local pages in my site, when I try to collapse
folders, other folders mysteriously expand. So, I click on one +
sign and another folder changes from - to + (expanding). This
happens in both the panel view of the site folders as well as in
the large expanded view -- the one that looks a bit like Explorer
in Windows.
This does not happen every time, but most times. So, for
example, I'll collapse a first folder and maybe a second one, and
when I try to collapse a third folder it does not collapse -- and,
the first two folders expand. This is in DW 8.
I assume things should not be working this way. Any ideas?
Thanks.

I've been looking for this solution for a while, and as i had
65 sites that this was slowly affecting, i'm going to post my
solution, based on alan's recommendations.
generally, the outline below creates a REG file that will
remove all "Local Expanded Dir #" and "Remote Expanded Dir #"
values, and reset the "Local Expanded Dirs" and "Remote Expanded
Dirs" values to 0. and will do it for every site you have
configured within dreamweaver (in my case it was 65 of them to
fix). and it makes it easy to repeat the fix later when it gets
corrupted again.
1. open regedit, go to the key
HKEY_CURRENT_USER\Software\Macromedia\Common\8\Sites and check out
how many site folders you have listed (starts with 0). poke though
the site folders, and make a note of the site that has the most
"Local Expanded Dir #" or "Remote Expanded Dir #" folders - its the
number of these entries you're after.
2. create a .txt file, and add the following content:
[HKEY_CURRENT_USER\Software\Macromedia\Common\8\Sites\-Site0]
"Local Expanded Dir 0"=-
"Local Expanded Dir 1"=-
"Local Expanded Dir 2"=-
"Local Expanded Dir 3"=-
"Local Expanded Dir 4"=-
"Local Expanded Dir 5"=-
"Local Expanded Dir 6"=-
"Local Expanded Dir 7"=-
"Local Expanded Dir 8"=-
"Local Expanded Dir 9"=-
"Local Expanded Dir 10"=-
"Local Expanded Dirs"=dword:00000000
"Remote Expanded Dir 0"=-
"Remote Expanded Dir 1"=-
"Remote Expanded Dir 2"=-
"Remote Expanded Dir 3"=-
"Remote Expanded Dir 4"=-
"Remote Expanded Dir 5"=-
"Remote Expanded Dir 6"=-
"Remote Expanded Dir 7"=-
"Remote Expanded Dir 8"=-
"Remote Expanded Dir 9"=-
"Remote Expanded Dir 10"=-
"Remote Expanded Dirs"=dword:00000000
(blank line here)
3. modify the code abot to include enough lines to cover your
noted number of "Local Expanded Dir #" and "Remote Expanded Dir #"
entries. just copy/paste the lines and change the numbers to match
your needs.
4. now select and copy all the lines in the file, and
repeatly paste them at the end of the file, changing the HKEY site
number (at the end of the KEY) after each paste, until you have
created a group of lines for each site in your configuration. YOU
MUST LEAVE A BLANK LINE AFTER EACH GROUPING - this tells regedit
that a new KEY will be used, and won't work correctly if you don't
leave them.
5. At the top of the file, add this line for Windows 2000, XP
and Vista users:
Windows Registry Editor Version 5.00
(blank line here)
5. save the file, and rename the extension to ".reg".
6. either double-click on the file to import it into the
registry, or open REGEDIT and import the file directly.
for my configuration, i created 100 lines for each of the
LOCAL and REMOTE sets (for these values, more is okay, as it's
telling the system to delete them, and if they don't exist, no big
deal), and duplicated the entire group 65 times. BE SURE TO LEAVE
BLANK LINES WHERE INDICATED.
Makes for a very large REG file, but it cleaned out all the
problems at once. when it becomes a problem later, i can just
modify the file to include more site numbers, and fix it quickly
again.
alan, thanks for the fix - i didn't find anything remotely
related during any google searches - just wasn't guessing the right
keywords i guess - so i finally thought to check dreamweaver forums
directly, and found it almost instantly.
Hope this helps the next person.
(edited to include references to blank lines - very critical
to working correctly)

Collapse folders in mail, collapse folders in mail

Hi,
Will a HP L2105tm 21.5" touchscreen monitor work with a Macbook 2010 with OS Lion?
Thanks,

Hi I put out the same request and so far the answer seems to be that iPad does not have the ability to collapse and expand the folders.....yet.....I hope Apple will get this feature added soon. I have business folders with many clients and sub-folders within them and the list is growing. I use Gmail and it works fine when I'm on my PC, but not with the iPad.

HT2480 When I am setting up exchange / outlook mail, I am not getting option to select the folders for syncing, can you please help me to solve this problem

In outlook mail mails are not getting downloaded and option to select the folders to sync is not visible in the exchange setup

See:
* http://www.ehow.com/how_6609141_remove-bearshare-spyware.html
* http://www.fanhow.com/answers/question-77222-how-to-delete-bearshare-search-from-firefox
You can look for a "Mediabar" program under "Control Panel > Programs and features"
See also this forum thread about BearShare:
*[[/questions/792580]]
If the menu bar is hidden then press the F10 key or hold down the Alt key to make the menu bar appear.
Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.org/kb/Back+and+forward+or+other+toolbar+items+are+missing

Cannot expand public folders in Outlook but can in OWA

Hi All,
I have a problem which I hope some one might be able to shed some light on. Firstly, the environment is Exchange 2010 (v 14.01.0438.000) and all clients use Outlook 2007. We have one user in the organisation who recently noticed that he cannot expand public
folders. He had been able to do so a couple of months back but could not pin point the time it stopped working. The error received reads :-
"Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to Microsoft Exchange has failed."
I thought that this might be a permissions issue but this particular user can access the public folders via OWA. Also, my AD account was a copy of this user's and I can access public folders without issue.
I have tried the following so far :-
Tried running Outlook in safe mode
Tried recreating the Outlook profile.
Tried creating a new Outlook profile on a different client PC.
Tried running Outlook in cached an online modes.
Ran Exchange BPA and found no issues.
Checked ADSIedit for old administrative groups left over from past migrations.
used the test-outlook connectivity cmdlet from powershell which ran it's tests successfully.
This user originally set up all the public folders and was still listed as the owner of all of them.
Tried creating a new public folder.
Checked for an Outlook update that had caused a similar issue.
All the above failed to progress the situation. I have come across posts online that sound very similar, one stated that a Microsoft tech had found a permission that wasn't correct but didn't list which permission and the other related to an update to Outlook
that had triggered it. I can confirm it's not the update and I have checked permissions in the public folder management utility in Exchange. Also, my AD account is a copy of his and I can access the folders without issue.
I have also considered what may have changed on the network recently. The only major change has been a new admin password but I cannot see how that would be relevant.
Any help would be hugely appreciated!
Thanks in advance!

Hello John: We are having the exact same issue. Thank you for the great description, it hits the nail on the head for an issue that is tough to explain. Did rebuilding the mailbox fix the problem? We thought a next step would be to create a new
AD profile for the user all together, although replacing the user herself would be easier for us. She obviously caused this problem and will most likely cause us more problems that might be worse if she keeps clicking and sliding on every thing that
is shiny to see what it does..
I can only surmise that CaRa ChEn has decided to "better understand customer views on social support experience" elsewhere. I think the only logic for the mailbox suggestion would be "grasping for straws" and it is the only thing you have not tried
so far. (Other than replacing the user). Pactera employees get points for being the first to reply to a question and the first to have a suggestion marked as helpful as well as the sheer quantity of replies to the forums that are made. High
value is placed on moving posts to different forums as well so I thought I would ask quick before the thread gets shoveled somewhere else.. If she needs help with the interview project she can find plenty of my thoughts here in the community.
Thanks again, and we will reply back if replacing the user (account) does NOT solve the problem, otherwise one can assume we are happy campers again our new employee and remember just because it is blinking does not mean you should click on it. :)
Best regards,
RickkEE

[Forum FAQ] How to use parameter to control the Expand/Collapse drill-down options in SSRS report?

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

Option to expand/collapse folders inside of folders?

Similar Messages

Maybe you are looking for