Drill Down are not giving correct values
Hi
We created sales Order values as a character and putting them in Rows and populating data by writing update rule. We created variables on calendar month in order to choose specific period of data in the query. For example if we need 02/2008 to 0/42008 which gives two months of data. When I drill down on Sales Order or billing document on the report its not giving variable interval data instead its pulling all the sales orders and billing documents in the Cube. With out drilling down the values are showing OK. If I restrict with same period in the cube it's giving correct values
Please let us know if you have any ideas.
Thanks
Naga
Aah, I guessed it correctly!
Remove the local var of the Stop button & place the terminal itself inside the inner while loop & directly wire it to the conditional terminal of the outer while loop.
Please see the attached pic...
Message Edited by parthabe on 07-30-2009 07:12 AM
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
arrayreq_mod.jpg 97 KB
arrayreq_mod.jpg 97 KB
arrayreq_mod.jpg 99 KB
Similar Messages
-
Stock Ledger Report in Day Wise not giving correct values for Opening Stock
Dear Experts,
I m working on Sock ledger report to give the day wise data.
since yesterdays closing Stock will become opening stock of today,
To get Opening Stock,
I have restricted the stock key figure with 2 variables on calday
(DATE FROM var with <=(Lessthan or equal to) and offset -1
DATE TO var with <=(Lessthan or equal to) and offset -1)
To get Closing Stock,
I have restricted the Stock key figure with 2 variables on calday
(DATE FROM var with <=(Lessthan or equal to)
DATE TO var with <=(Lessthan or equal to) )
But in the output Opening stock values are not coming correctly and for given range of dates,
for last date, opening stock is showing as Zero.
Could you please tell me how can I achieve the correct values for opening stock.
Thanks in advance.Hi Arjun,
Seems like you are making it more complicated. What is your selection screen criteria?
Ideally you should only use the offset.
You will have say Calday in rows and stock in Column
____________Opening Stock_____________Closing Stock
01/06/2009___(Closing stock of 31/05/2009)_(Stock of 01/06/2009)
02/06/2009___(Closing stock of 01/06/2009)_(Stock of 02/06/2009)
03/06/2009___(Closing stock of 02/06/2009)_(Stock of 03/06/2009)
So, from above scenario, create one RKFs and include Calday in it. Create a replacement path variable on calday and apply the offset as -1.
So, your Opening Stock will be calculated by closign stock of previous day.
- Danny -
PO query not giving correct values
Hi
I am running the following query in PL?SQL Developer
SELECT hou.name Operating_unit,
pha.segment1 po_number,
pha.revision_num,
ap.vendor_name,
hla1.location_code,
papf.full_name Buyer,
to_char(pha.creation_date, 'DD-MON-RRRR HH24:MI:SS') creation_date,
pdta.type_name,
assa.vendor_site_code,
hla2.location_code,
initcap(pha.authorization_status) po_status,
pha.currency_code,
pla.line_num,
pltt.line_type,
msib.segment1 item,
(mcb.segment1 || '.' || mcb.segment1) category,
msib.description,
msib.primary_unit_of_measure UOM,
pla.quantity,
pla.unit_price,
(pla.quantity * pla.unit_price) amount,
(gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
gcc.segment4 || '-' || gcc.segment5) charge_account,
pla.list_price_per_unit,
at.name,
pha.freight_terms_lookup_code,
pha.fob_lookup_code,
initcap(pha.pay_on_code) pay_on_code,
pha.acceptance_required_flag,
ood.organization_code,
ood.organization_name,
msib.primary_unit_of_measure UOM,
pla.quantity,
plla.country_of_origin_code,
(gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
gcc.segment4 || '-' || gcc.segment5) charge_account,
(pla.quantity * pla.unit_price) amount,
plla.receive_close_tolerance,
plla.invoice_close_tolerance,
plla.quantity,
plla.quantity_received,
plla.quantity_cancelled,
plla.quantity_billed,
plla.match_option,
plla.accrue_on_receipt_flag,
plla.enforce_ship_to_location_code,
plla.days_early_receipt_allowed,
plla.days_late_receipt_allowed,
plla.receipt_days_exception_code,
plla.qty_rcv_tolerance,
initcap(plla.qty_rcv_exception_code),
plla.allow_substitute_receipts_flag,
plla.receiving_routing_id,
plla.enforce_ship_to_location_code,
initcap(pda.destination_type_code),
papf.full_name requestor,
hla3.location_code,
--pda.quantity_ordered, -- commented because giving wrong value
(select quantity_ordered
from po_distributions_all
where po_header_id IN (select po_header_id
from po_headers_all
where segment1 = pha.segment1)) quantity_ordered, -- Added
(gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
gcc.segment4 || '-' || gcc.segment5) po_charge_account,
haou.name,
prha.segment1,
prla.line_num,
to_char(prla.rate_date, 'DD-MON-RRRR') rate_date,
(gcc.segment1 || '-' || gcc.segment2 || '-' || gcc.segment3 || '-' ||
gcc.segment4 || '-' || gcc.segment5) po_charge_account,
(SELECT acc.segment1 || '-' || acc.segment2 || '-' || acc.segment3 || '-' ||
acc.segment4 || '-' || acc.segment5
FROM gl_code_combinations acc
WHERE acc.code_combination_id = pda.accrual_account_id) accrual_account,
(SELECT acc.segment1 || '-' || acc.segment2 || '-' || acc.segment3 || '-' ||
acc.segment4 || '-' || acc.segment5
FROM gl_code_combinations acc
WHERE acc.code_combination_id = pda.variance_account_id) variance_account,
pla.line_num,
plla.shipment_num,
ood.organization_code,
ood.organization_name,
msib.segment1,
msib.description,
pla.quantity
FROM hr_operating_units hou,
po_headers_all pha,
ap_suppliers ap,
hr_locations_all hla1,
per_all_people_f papf,
po_document_types_all pdta,
po_document_types_all_b pdtab,
ap_supplier_sites_all assa,
hr_locations_all hla2,
po_lines_all pla,
po_line_types_b pltb,
po_line_types_tl pltt,
mtl_system_items_b msib,
po_line_locations_all plla,
mtl_categories_b mcb,
po_distributions_all pda,
gl_code_combinations gcc,
ap_terms at,
org_organization_definitions ood,
hr_locations_all hla3,
po_requisition_headers_all prha,
po_req_distributions_all prda,
po_requisition_lines_all prla,
hr_all_organization_units_tl haou
WHERE 1 = 1
AND pha.segment1 = '6395' --&po_number
AND hou.organization_id = 204 --&operating_unit
AND hou.organization_id = pha.org_id
AND pha.vendor_id = ap.vendor_id
AND hla1.location_id = pha.ship_to_location_id
AND papf.person_id = pha.agent_id
AND SYSDATE BETWEEN papf.effective_start_date AND papf.effective_end_date
AND ((pdtab.document_type_code IN ('PO', 'PA') AND
pdtab.document_subtype = pha.type_lookup_code))
AND pdta.document_subtype = pdtab.document_subtype
AND pdta.document_type_code = pdtab.document_type_code
AND pdta.org_id = Pdtab.org_id
AND pha.org_id = pdta.org_id
AND ap.vendor_id = assa.vendor_id
AND pha.org_id = assa.org_id
AND pha.vendor_id = assa.vendor_id
AND pha.vendor_site_id = assa.vendor_site_id
AND pha.bill_to_location_id = hla2.ship_to_location_id
AND pla.po_header_id = pha.po_header_id
AND pltb.line_type_id = pla.line_type_id
AND pla.line_type_id = pltt.line_type_id
AND pltt.language = USERENV('LANG')
AND msib.inventory_item_id = pla.item_id
AND plla.po_line_id = pla.po_line_id
AND msib.organization_id = plla.ship_to_organization_id
AND mcb.category_id = pla.category_id
AND pda.po_line_id = pla.po_line_id
AND pda.po_header_id = pha.po_header_id
AND pda.code_combination_id = gcc.code_combination_id
AND at.term_id = pha.terms_id
AND ood.organization_id = plla.ship_to_organization_id
AND pda.deliver_to_person_id = papf.person_id
AND hla3.location_id = pda.deliver_to_location_id
AND haou.organization_id = prha.org_id
AND haou.language = USERENV('LANG')
AND prha.org_id = pha.org_id
AND prha.requisition_header_id = prla.requisition_header_id
AND pda.req_distribution_id = prda.distribution_id
AND prda.requisition_line_id = prla.requisition_line_id
AND haou.organization_id = hou.organization_id
AND prla.org_id = pha.org_id
AND prda.code_combination_id = gcc.code_combination_id --added
AND hla3.inventory_organization_id = msib.organization_id --added
AND pda.line_location_id = prla.line_location_id --added
AND plla.po_header_id = pha.po_header_id --added
I tested it for 10 POs. for 2 the query is giving right value. but for others it is giving wrong value.
Mainly the PO Charge Account, accrual and variance account values are not matching. What changes I can make to get the correct data?
I am using r12 version
ThanksHi Srini,
Thanks for replying. I check and the application context is set.
I think we might be missing certain conditions. Can you help me with that. -
Pls help
Yes that is the map but the area that is 4G is North-West Salt Lake. Some of downtown is 4G (I guess 4G and extended 4G is that extended is or can be sometimes 4G and sometimes 3G.) I never doubted that Salt Lake had some 4G. I was trying to tell you that the Verizon agent told me that Salt Lake city will not have 4G until the end of 2011. she gave me the URL to an article that validates that. the other map which another agent used is just red and white. She said go by this map since it is more accurate as of now and the one with the various reds is toward the end of 2011. whatever the story is, I have no idea but if you look at the map that you are questioning if I refreshed the map aft checking 4G you will see that most of downtown Salt Lake is not the burgundy red and south of downtown has no 4G at al, just 4G extended and 3G. If you want to check the area where I live it is near 3900 South or on the section of the map you are showing in your post, it is South of 215 and 80 frwys. this area on the map I used this morning is all 4G extended and 3G. I have no idea why the only pure 4G is near the Great Salt Lake, but that area is out where the airport is (west of downtown Salt Lake). Have you looked at the other map that is just red and white? I am not sure of the difference but the agent told me that map is the most current map if you want something that is current.
I am confused. But I am still confused as to why you were wondering if I was refreshing the map? I was telling or describing in my post what the agents at Verizon had told me, not what I had seen on the multi colored map.
thanks, -
Boolean values are not displaying correct
hi ..
i have created a application which has one report .. in report field
there's boolean field (true or false) when i run my application
it will show the correct results...
but when host the application in IIS7 then the result will not
show correct value .. it is showing only true...
if there's a value false also it is showing true only...
what to do.... ?hi..
I have developed an web application
i am using SAP crystal report 13 for VS2010
and i have hosted that application in iis 7
It is been developed in c#.net ..
OR
i have one solution ...
can we create a formula so that if the value is
0 then it should show false and if the value is
1 it should show true... in formula field... -
Function keys are not working correctly
I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly -
Entity Descriptions are not displayed correctly in Combo box dropdown list
In Web Analysis, Entity Descriptions are not displayed correctly in Combo box dropdown list when entity descriptions from HFM contains a dot(.)
Example:
'Entity A. LTD' becomes 'LTD'
'Entity B Inc.' becomes blank
It seems that everything before the dot is not displayed when opening the combobox.
It looks like it is acting like the option to show short description for entities in HR where the parent-child relation is not shown. This behaviour I don't expect for descriptions. And in my opinion is not an option in Web Analysis.
Does anybody knows the sollution or have seen this issue before?Hi,
This is a known issue with combo box list of values.
Please follow this workaround:
- Remove ComboboxLOV on Deptno
- Create an updateable transient attribute(Say Dname) of type String
- Define combobox lov with following values:
List Data Source: DeptView1
List Attribute: Dname
List Return Values:
Dname - Dname
Deptno - Deptno
UI Hints: Display Attribute - Dname
- Edit Dname(transient attribute) and provide following groovy expression
oracle.jbo.Key key = new oracle.jbo.Key(Deptno);
return DeptView1.findByKey(key, 1)[0].getAttribute("Dname");- Now, you are done and observe that Dname combo box lov shows Description even on selection and change in this combo box sets the Deptno value
Sireesha -
International Characters in PDF Forms are not shown correctly (Adobe Reader 11.0.06)
I have a PDF form served from a web application and shown in Internet Explorer and want to put in string values with norwegian letter like 'ÅRE ØRE ÆRE'.
These are not shwon correctly when I toggle "Highlight Existing Fields" and the focus is not on the text field in question.
I am runing on Windows 7.I cannot reproduce this using a test form I created: https://files.acrobat.com/a/preview/e6b390e1-625c-4f59-86c5-c2ca07998279
Does the same thing happen with the form above? If not, can you share your form with us: http://forums.adobe.com/thread/1408375 -
Permissions are not displaying correctly on Yosemite server
My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share. When checked from the server's finder, everything looks correct. The server is setup for both AFP and SMB on file sharing. I have also tried setting permissions from the server's finder and seemed to make no difference.
When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group. Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Can an ipod get a virus from a pc that has a virus. After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod, if not why would both ipods not work and be doing the same thing? When trying to click on a game it just stays on the main screen.
- I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
- Try resetting the iPods. nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Do you hve problems with one game? The same game on both iPods?
Other apps? -
Recordmode data are not updated correctly
We currently have an issue while using the 3.x data flow in BI 7.0. The same also holds with 3.x versions of BI.
Suppose you have an ODS sending data in an InfoCube. When you initialize the delta process with data transfer then the recordmode field in the communication structure contains null values even though in the change log table of the ODS it has values. This behaviour does not hold when you send further data with deltas.
We want the recordmode data to be updated correctly since we use them in a condition. Does anybody know about this problem?
Best regards
TheodorosHi again,
the problem is also not related with any kind of mapping. We are just sending some data from an DSO to an InfoCube. Recordmode values are maintained correctly in the change log table of the DSO. Nevertheless, they are not updated correctly in the InfoCube's update rules communication structure unless we are uploading deltas. My question is why they are not updated also correctly when we are doing an initialization of the delta with data transfer.
Thanks anyway
Theodoros -
The developers at Mozilla are not giving me what I want
The developers at Mozilla are not giving me what I want. What I want is a program that doesn't slow down and then crash when I have too many windows open, which is what both 3.5 and 4.0 have done. Instead, I am getting new features that I don't want, like my tabs on top (an illogical place to put them) and a big orange button which forces me to make an extra click when I want to open a menu.
The last stable version of Firefox was version 2. When I bought a new computer and got Windows Vista, version 3.5 wouldn't even open. When I upgraded to Windows 7, version 3.5 would open, but it slowed down and crashed constantly if I had too many windows open. Version 4 is doing the same thing, but this version freezes repeatedly before it crashes, giving me the message "(Not Responding)".
So what do I do? Well, I go on the Mozilla site to send them a message, and I am confronted with condescending smiley and frown faces and a message box that is limited to 140 characters. So then I tried to find the forums, only to find no link at all to the forums. So not only doesn't the program work, but I am not allowed to send detailed feedback.
What was once a good product is now a piece of junk, and the people who are developing it don't seem to care that it doesn't work, and they treat their users with nothing but contempt.Right-click in the empty space near the orange button and deselect "Tabs on Top" to get the tabs back to where they used to be.
For the orange button, apparently this addon will get rid of it: https://addons.mozilla.org/en-US/firefox/addon/app-button-remove/
I haven't tried the above addon because I happen to like the new button. (I also had the TinyMenu addon installed on previous versions.)
I had a ton of problems with random crashes in 3.6, but in my experience 4 is worlds better. I've been using it for about a month and only had two crashes, while 3.6 was crashing almost every day. What addons do you have installed? It could be that your crashes and freezes are being caused by one of the addons.
I know what you mean about Firefox developers, though. I have been increasingly disillusioned with their tendency to label bugs as new features, and if 4 hadn't been such an improvement for me, I probably would've switched to Chrome. -
Some fonts are not shown correctly in LabVIEW 2012
I found a bug related with fonts in LabVIEW2012 f3 KR.
- When I select NI7SEG in font selection dialog, right font is not shown in the example box.
- Draw text at point.vi shows same problem for some fonts while other fonts are working.
I reported it to Korean NI. As far as I know, this was not reported in previous versions and I couldn't find any related documents in Google.
So, here I would like to know whether it is related with only Korean version. Please let me know if English version is OK.
* OS: Windows 7 32bit KRJust now, I installed LabVIEW 2012 f3 (32-bit, English) and checked for the issue. But the font(NI7SEG) was not shown properly in VI either.
- Both of Korea and English version of LabVIEW 2012 on Win 7 Korea OS shows wrong results. It is same on 64-bit OS.
- LabVIEW 2010 but on same PC shows correct fonts.
Is there a limit of number of fonts in LabVIEW? There are more than 100 fonts are shown in the "Selection Font" dialog and I can divide them into 3 groups by sequential order. I find that all fonts in the 3rd group are not applied correctly.
(1st group)
Arial Unicode MS...
Bookshelf Symbol 3....
Windings 3
(2nd group)
@Arial Unicode MS...
@Terminal
(3rd group)
Arial...
Consolas...
Courier...
Licida Console...
NI7SEG...
Verdana -
Umlauts are not displayed correctly in different programs
Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)Did you check the locale settings on your Windows machine?
-
PO screen custom fields are not in correct order
Hi Experts,
After creating Shopping cart and purchase order successfully created.
Added my custom fields for PO structure INCL_EEW_PD_ITEM_CSD_PO fields are visible in PO screen automatically with out adding my custom fields in PO layout /SAPSRM/WDC_DODC_PO_I_BD
when i go to PO screen i can see my custom fields but all fields are not in correct order.How can my fields should be in order.
and i added two custom buttons in my PO layout for WD component /SAPSRM/WDC_DODC_PO_I_BD i am not able to see my buttons?
Could you please help me out in this issues its urgent.
Thanks,
Venkatesh GI've had this problem. There may be a more elegant solution, but what I do is make a playlist of the album and put the movements in the correct order in the playlist. I've also put numbers (01, 02, etc.) in front of the name of the movements. Either one works.
Hope this helps.
Ben
Maybe you are looking for
-
After upgrading iTunes on iPhone4, text displays as squares
After upgrading iTunes on iPhone4, the text is displaying as squares and symbols. Does anyone know how to fix?
-
Hello, I've my dock on the left side of the screen and "hiding" is turned "on". If any window, lets say Safari, has been minimized onto a dock, and then, if I do Command+Tab to bring Safari up, it fails to bring the window up to front, instead only S
-
Web service - XML not in format
Hi, i created one web service which has function returning integer. i called this WS in BLS. I saved response of function in xml file using XML saver action block. But i cant read this file in query template. i.e it is not in format. it shows as <?
-
Hi all! I googled, but I seem to only be able to find out methods involving a serialized file, but I can't find out exactly what it is to start with. Any explanations/links welcome. Thanks!
-
MobileME's Find My iPhone/iPod: working for you?
Hi guys, have any of you gotten the "Find My iPhone" feature to work? I've followed pretty much all Apple suggests and also deleting/reconfiguring my MobileME account on my Touch to no avail. On the FMP page it shows my iPod online as well as ID'ing