Drill-down by inserting problem

Hi Experts,
I have created a report a basic one with accounts on rows and time in columns and have added some macros to it.
Whe I double click a row to drill down it works, but if I click again, instead of collapsing it expand again.
Has anyone had the same issue? Any idea about why it happens?
Thank,
Ana

Hi,
Please check the Drill down option enabled for your report. If it is
1) Drill down by Inserting the arrow keys doesnt get activated, and you can roll back by double clicking the parent node again.
2) Drill down by Overwriting the arrow keys will be activated and you can use that.
Hope this helps,
Regards,
G.Vijaya Kumar.

Similar Messages

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

Bar Chart Drill down getting "Insert in range overlaps with other series" # Error

Hi friends,
I am trying to drill down for Bar chart to Combination chart dashboard.
I have bar chart in region wise values are Revenue ,Net contribution,Total cost ,
So when i was binding for those values for one destination column could be same
in spreadsheet then its getting below error.
I tried formula for one destination to other columns
in spreadsheet also but that's not allowing to formula for binding destination .
Please kindly anybody help me out
Thank you
Sudhakar M

Hi Runali,
Sorry for late reply,the issue was not solved .
Got another issue in BI launch pad .
one Webi report migrated from R2 environment to BO 4.1.when open that report in BI launch pad
working perfect but when report was edit in the query level and run the all queries its asking context selection
If i selected all the context and run all the queries then again getting another issue.
Why its asking Query Context in Query prompt level?
Thank you
Sudhakar M

Multi-level Drill Down

Hi All,
I have to develop a Dashboard that has multi-level drill down on Charts.
I am trying to figure out which is best practice.
1. Display all the charts on 1 screen
2. Display charts as they go down the drill path.
An example would be
Chart1 -> Chart2 -> Chart3 ->Chart4
In this case would it require a close button or Back button to take me back to first screen when I am 1 or more level down. What is the general practice?
Any Inputs are greatly appreciated.
Mucho Gracias!
Sam

Hi Anil,
Your idea was quite helpful. However, I am trying to dynamically hide/show a label based on the drill-down. The whole idea is to make it a close button as you suggested earlier.
Initially the first screen should become visible with a chart. When a chart bar is clicked then second chart should be visible with close button on the top while the first chart becomes hidden. After clicking close, chart 1 is visible and chart2 is hidden.
Any idea how to achieve this.
Right now I tried to dynamically hide/show label but when I preview it is always showing. I have set the dynamic status and key to what the chart drill down will insert and for that I have a row insert with 1 and 2. This is not working.
Thanks for your earlier response.
-Sam

Drill down with worksheet protected

hi experts,
is it possible to still use the drill down while my worksheet is protected.. because when i created a report the drill down is still working but when i protect it the drill down is not working.. its that how it supposed to work? if yes is there still a way to be able to use drill down while protecting the template..
Thanks in Advance,
Aries

i run some test and this is my finding,
when you choose the DRILL DOWN OPTION > Drill Down by inserting new rows, you can use more hardcoded memberset like this one "ALL(T_Tropical) and Codetype=Fert" and still be able to use the drill down BUT you wont be able to use the drill down when you protect your worksheet even if your memberset is just SELF,DEP
my only option then, is to not protect the worksheet.

Problem displaying drill down STANDARD ALV for a particular record after pressing back button

I have a simple interactive ALV grid report. NOT 'OO'. It display correctly on initial execution. AT the moment, 6 records. I want it to work such that if i click record '1', a drill-down version of that ALV with only that one record clicked is displayed. This currently occurs correctly. The problem arises when i click the back button and want to click on a new record, say in the 2nd row..this new 2nd row record is not displayed. The first one is displayed again. I tried clearing and fiddling around but then the last record is displayed. I have used the 'ID' field as a 'hotspot' getting picked up by sy-tabindex. Maybe it could be that i shouldn't loop and use a work area e.g in my select statement. i'm not so sure i've looked around, and tried a few things. I can't get it right yet. My code is below:
*& Report ZALV
REPORT ZALV.
TABLES: ZCONTACT.
TYPE-POOLS: slis. "slis contains all of the ALV data types.
TYPES: BEGIN OF ty_zcontact.
         INCLUDE STRUCTURE zcontact.
TYPES: icon TYPE char4, "field holding traffic light value- adding a column to internal table to hold the traffic light
         END OF ty_zcontact.
DATA: "fieldcatALOG TYPE slis_t_fieldcat_alv WITH HEADER LINE,
       it_zcontact TYPE TABLE OF ty_zcontact,"declares an internal table of type ZCONTACT
       wa_zcontact TYPE ty_zcontact,
       gd_layout TYPE slis_layout_alv,
       gd_repid LIKE sy-repid,
       g_variant TYPE disvariant,
       gx_variant TYPE disvariant,
       g_save TYPE c VALUE 'X',
       it_fieldcat TYPE slis_t_fieldcat_alv,"declares field catalog table of line type alv
       wa_fieldcat TYPE slis_fieldcat_alv, "declares the work area of the field catalog
       it_list_top_of_page TYPE slis_t_listheader.
DATA: it_fieldcat1 TYPE slis_t_fieldcat_alv,
       wa_fieldcat1 TYPE slis_fieldcat_alv.
DATA: V_FIELD(30) TYPE C,
V_VALUE(10) TYPE C.
       "izontact TYPE TABLE OF zcontact.
        "i_logo TYPE OT.
       "ls_layout TYPE slis_layout_alv.
**Selection Screen details
*SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
*PARAMETERS: variant like disvariant-variant.
*SELECTION-SCREEN END OF BLOCK B1.
SELECT-OPTIONS:
age FOR wa_zcontact-age,
lastnme FOR wa_zcontact-lastname.
**Getting default variant
* AT SELECTION-SCREEN ON age.
*    SELECT SINGLE age FROM zcontact INTO wa_zcontact-age WHERE age = age.
* IF sy-subrc NE 0.
*    MESSAGE:'That age does not exist mate, Please enter another age' TYPE 'E'.
*    ENDIF.
INITIALIZATION.
*gx_variant-report = sy-repid.
*CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
*EXPORTING
* I_SAVE = G_SAVE
* CHANGING
*    CS_VARIANT = GX_VARIANT
* EXCEPTIONS
*    NOT_FOUND = 2.
*IF SY-SUBRC = 0.
* VARIANT = GX_VARIANT-VARIANT.
* ENDIF.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM DISPLAY_ALV_REPORT.
PERFORM top_of_page.
"g_repid = sy-repid.
*Fetch data from the database
FORM DATA_RETRIEVAL.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE age IN age AND lastname IN lastnme.
"assigning traffic light colour to each row based on a condition
* IF wa_zcontact-age GE 65.
*   wa_zcontact-icon = 1. "Red Traffic Light
*   ELSEIF wa_zcontact-age BETWEEN 40 AND 64.
*     wa_zcontact-icon = 2. "Yellow traffic light
*     ELSE.
*       wa_zcontact-icon = 3." Green traffic light
*       ENDIF.
*       MODIFY it_zcontact FROM wa_zcontact TRANSPORTING icon.
*       CLEAR wa_zcontact.
ENDFORM.
FORM BUILD_FIELDCATALOG.
*Build field catalog
wa_fieldcat-fieldname = 'ID'.
"wa_fieldcat-seltext_m = 'The Contact ID'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LASTNAME'.
"wa_fieldcat-seltext_m = 'Contact Lastname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FIRSTNAME'.
"wa_fieldcat-seltext_m = 'Contact Firstname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'DOB'.
"wa_fieldcat-seltext_m = 'Date Of Birth'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'TEL'.
"wa_fieldcat-seltext_m = 'Telephone Number'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ADDRESS'.
"wa_fieldcat-seltext_m = 'The Address'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'OCCUPATION'.
"wa_fieldcat-seltext_m = 'The Occupation'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'WEIGHT'.
"wa_fieldcat-seltext_m = 'WEIGHT'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AGE'.
"wa_fieldcat-seltext_m = 'AGE OF THE CONTACT'.
wa_fieldcat-do_sum   = 'X'.        "Display column total
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'SALARY'.
"wa_fieldcat-seltext_m = 'SALARY'.
wa_fieldcat-do_sum   = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
gd_layout-lights_fieldname = 'ICON'.
ENDFORM.
FORM DISPLAY_ALV_REPORT.
gd_repid = sy-repid.
*Pass data and field catalog to ALV function module to display ALV list
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
       it_fieldcat            = it_fieldcat
       i_callback_program     = gd_repid
       i_callback_top_of_page = 'TOP_OF_PAGE'
       i_callback_user_command = 'USER_COMMAND'
       i_structure_name       = 'ZCONTACT'
       i_save                 = 'X'
       is_variant             = g_variant
       is_layout     = gd_layout
TABLES
       t_outtab      = it_zcontact
EXCEPTIONS
       program_error = 1
       OTHERS        = 2.
ENDFORM.
FORM top_of_page.
*ALV Header declarations
   DATA: it_listheader TYPE slis_t_listheader,
         wa_listheader TYPE slis_listheader,
         t_line like wa_listheader-info,
         ld_lines TYPE I,
         ld_linesc(10) TYPE C.
wa_listheader-typ = 'H'.
wa_listheader-info = 'Contact Details'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = sy-repid.
wa_listheader-key = 'Program Name:'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-info = sy-uname.
wa_listheader-key = 'User Name:'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-key = 'Run Date :'.
CONCATENATE sy-datum+6(2)
             sy-datum+4(2)
             sy-datum(4)
             INTO wa_listheader-info
             SEPARATED BY '/'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
wa_listheader-typ = 'S'.
wa_listheader-key = 'Time :'.
CONCATENATE sy-uzeit(2)
             sy-uzeit+2(2)
             sy-uzeit+4(2)
             INTO wa_listheader-info
             SEPARATED BY ':'.
APPEND wa_listheader TO it_listheader.
CLEAR wa_listheader.
   CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
     EXPORTING
       it_list_commentary = it_listheader
       i_logo = 'KLOGO'.
ENDFORM. "top_of_page
*& Form sub_user_command
FORM USER_COMMAND USING P_UCOMM TYPE SY-UCOMM
P_SELTAB TYPE SLIS_SELFIELD.
CASE P_UCOMM.
   WHEN '&IC1'.
CASE p_seltab-fieldname.
   WHEN 'ID'.
   READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
   PERFORM DATA_RETRIEVAL1.
   PERFORM BUILD_FIELDCATALOG1.
   PERFORM SECOND_GRID.
   ENDCASE.
   ENDCASE.
ENDFORM. "
FORM DATA_RETRIEVAL1.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
ENDFORM.
FORM BUILD_FIELDCATALOG1.
*Build field catalog
CLEAR: wa_fieldcat, it_fieldcat.
wa_fieldcat-fieldname = 'ID'.
"wa_fieldcat-seltext_m = 'The Contact ID'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LASTNAME'.
"wa_fieldcat-seltext_m = 'Contact Lastname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'FIRSTNAME'.
"wa_fieldcat-seltext_m = 'Contact Firstname'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM.
FORM SECOND_GRID.
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     I_CALLBACK_PROGRAM = SY-REPID
     IT_FIELDCAT = IT_FIELDCAT
     i_structure_name       = 'ZCONTACT'
     i_callback_user_command = 'USER_COMMAND'
     TABLES
       T_OUTTAB = IT_ZCONTACT.
   ENDFORM.

Hi Ten Mariga,
                 I wonder why the second select Query is needed at all instead you can use
---> Not Needed
FORM DATA_RETRIEVAL1.
SELECT * FROM zcontact INTO TABLE it_zcontact WHERE id EQ wa_zcontact-id.
ENDFORM.
----> Instead you can do
   READ TABLE it_zcontact INTO wa_zcontact INDEX p_seltab-tabindex.
Append wa_zcontact to Second_table.
And you can use the Second_table to display the second ALV. The second Select Query will affect the performance too.
Cheers,
Krishnakumar B.

Javascript Problem for Drill Down Action in SSRS Report when integrated to PPS 2010

Hi all,
I have a SSRS report which is integrated to PPS 2010(Performance Point Services) and it is having a drill down action through Go to URL action(I wrote javascript:void(window.open('xxxxx')) to open drill down report in new window).
This report has 5 parameters and all are multiple valued. Drill down report is opening very well when I open the report form Report Manager for any number of parameters values selected. But when I integrate the same report is PPS and deployed to SharePoint
then it is working only for 23 parameter values selected in PPS filters. If I select more the 23 values in PPS filters then the drilldown report is not opening.
But it is working well in Chrome, I verified in IE and Mozilla, both browsers are having problem.
When I look at Error Console of Mozilla, it is showing a javascript error as "Error: uncaught exception: ReferenceError: window is not defined" but the same report is working well if I select less than 24 filter values.
Please provide me the solution
Thanks in advance

Hi Vasu,
The issue might occur due to the Microsoft security update MS11-100 which limits the maximum number of form keys, files, and JSON members to 1000 in an HTTP request. Here, I suggest that you modify the Web.config file of the SharePoint site as follows:
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
</appSettings>
If the SharePoint site uses the port 80, the web.config file of the SharePoint site is located in the C:\inetpub\wwwroot\wss\VirtualDirectories\80 folder.
Reference:
An ASP.NET request that has lots of form keys, files, or JSON payload members fails with an exception
If the issue persist, please check whether there are any related errors in the Reporting Services log file which is located in <Drive>:\Program Files\Microsoft SQL Server\MSRSXX.<Instance Name>\Reporting Services\LogFiles.
Regards,
Mike Yin
TechNet Community Support

Problem with drill down on hierarchy with data on diffrent levels

Hello,
Im working on a project using oracle bi 10.1.3.4.1, and im kinda stuck with some problems.
I have a transaction table in which i have data about products, something like :
prod_id
amount1
amount2
and a product hierarchy which is something like:
prod_id
prod_name
parent_id
since bi doesnt support hierarchies, i had to faltten the hier table to somehing like this:
prod_id
lvl1_prod_id
lvl2_prod_id
lvl3_prod_id
lvl4_prod_id
and use this as my hierarchy in oracle bi. thus when i drill to lvl3, it will find all the products which are decendents of lvl3 value and group them.
the problem is, that the hier tree is not even, one product data (in transaction table) can be for lvl4 and another for lvl2. so for a lvl2 product id's in level 3 and 4 will be null.
when i try to drill to lvl 4, it takes all the rows which have the selected value in column lvl4 and group them, and if lvl 4 is null, it would sum up all the rows that have no parent at lvl4...
i hope you understand... cause it is a bit complicated..
anyway i would eventually like to add a filter of != null to the column being drilled down.
but how do i know which column is it?
i cant add a != null filter to all the columns since most if not all of them will have null in some lvl (lvl 10 or so).
one suggested solution was to make a report for each lvl with the !=null filter on the report lvl, and use navigate instead of drilldown... but that would mean i have to make 10 reports for each "real" report... a big problem to maintain.
hope i was clear enough, any suggestions?
thanks a lot!

Hi Ingo,
Thanks for your reply. If I combine two objects in one objects then I cannot use that object for drill down in my report.
I want to drill down for both Key and Text.

Xcelsius drill down problem.

Hi gurus, I'm developing drill down chart and table.
I want to reset, making cell blank, the drill down cell when i click combo box.
I used push button to refresh or reset drill down value but it can not refresh(reset) drill down cell
because the destination cell of the chart remains drill down value
I tried like below way
*Dashboard explanation
this dashboard consists of one chart, one table, one combo box and one push button.
Of course, chart has the drill down function
a : drill down value
Goal : make drill down cell turn to blank after i used drill down once.
1ST.
when i click the chart and use drii down, a is entered into drill down cell
2ND
by using "push button", i tried to reset drill down cell
but unfortunately it does not work.
Although drill down cell changes instantly to blank after just one second, it changes to a, drill down value
Drill down cell changes like this
1 -> 2 -> 3
a -> blank -> a
i have to eliminate (2->3) phase or find another way to refresh drill down cell.
I think problem is the chart which remains drill down value(a) although pushbutton reset the drill down cell to blank.
Is there any way to refresh or reset drill down value when i click combo box?
Should i develop custom-component? i'm waiting for your answer.
Thanks in advance.
Regards
Kwon

Amit,
Can you confirm if what you're saying also holds for components with the "Enable Drill Down" option enabled, and the "Default Selection" is set to "No Selection (-1)"?
I'm running into an issue where the "Default Selection" value is not cleared out after performing 3 levels of drill-down. On the third time I do a drill-down, by default the first element is selected, even though I've set the "Default Selection" to "No Selection (-1)".
Thanks.

Problem with drill down in time dimension - OBIEE 11G

Hello There,
I have a problem with drill down in time dimension. The hierarchy for time dimension is " Fiscal Year---> Fiscal Quarter---> Month(Name)--->Date". When I select a Time dimension and click results its getting opened in a Pivot table view. The problem here is, when I click the "Total" its getting drilled down to Year ---> Quarter but when I click on "+ sign next to quarter" it should drill down to month for that particular quarter for that particular year but its drilling down to month for that particular quarter for all years.
Any suggestions are much appreciated.
Thanks,
Harry.

1.) Congrats for resurrecting a year-old thread.
2.) Your answer is here: "Check the level key of the quarter level...it should include both quarter and year columns. Since a specific quarter occurs every year, quarter column alone can't be used as the level key."

Problem with the Drill down in the BeX Query Report

Hi Experts,
I have a problem when drilling down the characteristics in the BeX Report. There are nearly 125 fields (characteristics) all in Free Characterictics. After executing the Query, in the report when i am selecting one characteristic for drill down i am getting the values of another characteristic. This is not happening to all 125 fields.
Please let me know where is the problem and give me some suggestion what we can do with this.......

Here is my VI, it's just a trial so it can look messy...
Thanks,
Isabel
Message Edited by Isa_pm on 01-22-2007 01:12 PM
Attachments:
Create report.vi ‏96 KB

Layout problem for Drill down ALV Report

Hello Everyone,
                       I have developed a ALV drill down report using the method G_GRID->SET_TABLE_FOR_FIRST_DISPLAY. The problem is what ever layout i save for the primary list 'Screen 100' is effecting my secondary list 'Screen 200'. User need to save both Screen 100 and Screen 200 layouts independently without affecting each other.
I am calling screen 100 as below,
Call metthod g_grid_100->set_table_for_first_display
Exporting
   i_Save                                     = 'A'
   is_layout                                 = ls_layout
   is_Variant                                =   ls_Variant
Changing
   it_outtab                                  = ct_poitems
   it_fieldcatalog                           = lt_fieldcat
Exceptions
   Invalid_parameter_combimation   = 1
   Program_error                            = 2
   too_many_lines                         = 3
   others                                       = 4.
Could any body suggest me a way to do this..
Thanks in advance.
Regards,
Shyam.

Hi,
Use multiple Layout structure (each alv have its own structure) .
Note the use of disvariant-log_group .
DATA: gs_disvariant_1 TYPE disvariant ,
           gs_disvariant_2 TYPE disvariant .
* Layout-Logical groups
CONSTANTS: gc_log_group_1 TYPE disvariant-log_group VALUE 'ALV1' ,
                        gc_log_group_2 TYPE disvariant-log_group VALUE 'ALV2' .
INITIALIZATION.
PERFORM at_initialization .
FORM at_initialization .
DATA: vari TYPE disvariant-variant .
PERFORM alv_variant_get_default USING gc_log_group_1 CHANGING gs_disvariant_1 vari .
PERFORM alv_variant_get_default USING gc_log_group_2 CHANGING gs_disvariant_2 vari .
ENDFORM.
FORM alv_variant_get_default
USING
    log_group TYPE disvariant-log_group
CHANGING
    disvariant TYPE disvariant
    variant    TYPE slis_vari .
DATA: ls_disvariant TYPE disvariant.
ls_disvariant-report = sy-repid .
ls_disvariant-log_group = log_group .
disvariant = ls_disvariant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = ls_disvariant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    disvariant = ls_disvariant.
    variant    = ls_disvariant-variant .
ENDIF.
ENDFORM.                    "alv_variant_get_default
Later....
   CALL METHOD gui_alv_grid_1->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_1
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_1.
CALL METHOD gui_alv_grid_2->set_table_for_first_display
      EXPORTING
        is_layout       = wa_layout
        is_print        = wa_print
        i_save          = 'A'
        is_variant      = gs_disvariant_2
      CHANGING
        it_sort         = it_sort
        it_fieldcatalog = it_fieldcatalog
        it_outtab       = it_alv_grid_2.
Regards.

How to insert "%" into the report figure in report painter/ drill down

Please kindly advice how to insert "%" in the calculated amount in the report painter/ drill down report.
Thank you
Sirirak

Hi,
Create a text variable (for query name, option available in query properties).
Processing Type would be Replacement path, replace with variable.
Give the variable name created for the selection box characteristic in 'Replace with variable' option.
This would replace value of the text variable with the user input value.
Hope this helps!

Problem: Calculation YTD + Drill Down on period

Hi erveryone,
I have a question about the calculation of a YTD value.
The requirement is to show MTD and YTD values in the report based on the variable. So far no issue. But the requirement is also to do drill-down on period.
Inital Report view: Variable on Periode = 03.2010
Profit Center | MTD | YTD
PC1 100 250
Drill-Down on Periode - What happen is:
Profit Center | Period | MTD | YTD
PC1 01 100 100
PC1 02 50 50
PC1 03 100 100
The Goal should be:
Period | MTD | YTD
01 100 100
02 50 150
03 100 250
How can we solve this problem without a "static query" with a structure? Calculation the YTD in the Backend (Cube / DSO)
For your Information this report is based on the new FI-GL (0FI_GL_14)
Thanks for you help!
Andreas

Hi Vijay,
thanks for your fast replay. The cumulation works.
Now I get the following result:
Drill-Down on Periode - What happen is:
Profit Center | Period | MTD | YTD
PC1 01 100 100
PC1 02 50 150
PC1 03 100 250
but when I remove one month then he calculate the YTD just on the values in the view and not on the data basis.
Remove Date 01
Profit Center | Period | MTD | YTD
PC1 02 50 50
PC1 03 100 150
I want to have:
Profit Center | Period | MTD | YTD
PC1 02 50 150
PC1 03 100 250
Do you or someone have an idea how to fix that? Over special selection in the Query?
The MTD & YTD figures are RKF in the Query. Both are based on 0DEB_CRE_LC
Thanks in advance!
andreas
Edited by: Andreas Helbing on Sep 16, 2010 2:05 PM

Drill down problem in query in BI 7

HI all,
I m facing a problem regarding one query on customer.... in that NO. OF CUSTOMER , CUSTOMER NO., AND STATUS (1 OR 0) fields are there. depending upon "no of customer" we r giving the "status" as 1 (for non zero value of "no of customer") in place of yes and 0 for no (for zero value of "no of customer") to count total ...now when we are drilling down depending on CUSTOMER NO, when i m trying to consider only NO OF CUSTOMER in query then it should show total in the same row for particaular yes or no. So can please ne body help me how to resolve so that i can get this problem solved.
Thanks in advance,
Anurag

thanks

Drill-down by inserting problem

Similar Messages

Maybe you are looking for