Bar Chart Drill down getting "Insert in range overlaps with other series" # Error

Hi friends,
I am trying to drill down for Bar chart to Combination chart dashboard.
I have bar chart in region wise values are  Revenue ,Net contribution,Total cost ,
So when i was binding for those values for one destination column could be same
in spreadsheet  then its getting below error.
I tried formula for one destination to other columns
in spreadsheet also but that's not allowing to formula for binding destination .
Please kindly anybody help me out
Thank you
Sudhakar M

Hi Runali,
Sorry for late reply,the issue was not solved .
Got another issue in BI launch pad .
one Webi report migrated from R2 environment to BO 4.1.when open that report in BI launch pad
working perfect but when report was edit in the query level and run the all queries its asking context selection
If i selected all the context and run all the queries then again getting another issue.
Why its asking Query Context in Query prompt level?
Thank you
Sudhakar M

Similar Messages

  • Bubble Chart drill down issues

    I have a filter and a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings when I chnage the filter
    The problem is with drill down
    I want to drill down to a Bar chart when I click on bubbles. Each bubble click will drill down data into that bar charchart as a pop up. I know how to do it as I have done it in the past with other components.
    But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
    However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
    1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
    2. All bubbles are of same color.
    Is it possible to overcome above two limitations when using data in range option?
    Thanks

    Hi Tarun,
    as a workaround you could define a special area as mapping area for the X-Y-chart.
    This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
    Hope this helps,
    best regards
    Heiko

  • Xcelsius Bubble Chart - Drill Down Issues

    Hi ,
    Product : Xcelsius SP 3
    I have a bubble chat with 7 series. The chart is showing up bubbles with different size and colors as per the settings.
    The problem is with drill down
    I want to drill down to a X-Y chart when I click on bubbles. Each bubble click will drill down data into that X-Y chart as a pop up. I know how to do it as I have done it in the past with other components.
    But when I use drill down with bubble chart, I have to assign separate destination area for each series which makes it difficult to drill down into a chart. What i want is the bubbles to drill down data into a single row so that I can map the Y-axis of chart component to that row and X axis as fixed labels. But I am not able to do that. Moreover once inserted there is no way to clear the destination cells.
    However if I use data in range options in bubble chart then I can use drill down as I get only one series in that case. But that method also has limitations.
    1. I am not able to display series name on the bubbles. It doesn't make any sense to show bubbles without any labels.
    2. All bubbles are of same color.
    Is it possible to overcome above two limitations when using data in range option?
    Please help if someone has encountered this issue. There has to be some solution for this.
    Thanks,
    Tarun

    Hi Tarun,
    as a workaround you could define a special area as mapping area for the X-Y-chart.
    This area is filled via excel formulas from the bubble chart drill down destinations. You can concatenate the values from the drill down target areas, like "=A4&A5" etc. Make sure to clear all cells except the actual drill down target cells.
    Hope this helps,
    best regards
    Heiko

  • SVG Pie Chart drill down report

    I have created a svg pie chart report within a chart region. the chart contains url drill down.
    The urls work fine but it opens the result from the url in the same chart region on the same page.
    How can I get it to open on either a new page altogether or on another region on the same page.
    Regards
    iculhane

    How do you get the url drill down to work? Can you explain to me? I have a 3d pie chart, what I want is when I click one of the pieces, it will drill down to a report.
    Thanks,
    Helen

  • Bubble chart drill down

    HI All,
    We have 4 levels like(Continent,Country,State,Dist). Our business Req is like drill down from entity at  one level to another entity at the following level.Each Entity has one to many relation ships with entities in the subsequent levels.
    For Ex: One Continent will be linked to many Countries etc..
    We are trying to find a solution where a click on particular continent will point to a dataset / Range of values.....
    Could any one tell us how to define a range of values....
    Thanks In Advance
    Nithila

    Hi Nithila Siva  ,
    This is quite same as all other chart drill down.
    Here is the explanations:
    You have 4 levels drill downs :Continent,Country,State,Dist that means you can have 4 bubble charts in the canvas.In the First chart display all the continents(ex: Asia,Africa etc..) select asia from the first chart it should display all the contries in the ASIA (india ,pakistan etc..) in the second chart and follow the same for rest 2 charts.
    How can we do this:
    From your raw data you need to filter the data and point it to different charts. you can do this by writing formulas in the excels ex : point the data of all the continents in the first chart and in the properties tab-> enable drill down->select row-> in the source give all the continents and point the destination to one particular cell,so if you select a continent that value will come and sit in the destination cell and then you have to write formulas comparing the destination cell.
    Hope this helps.
    let me know if you need any explanation on this.
    Cheers,
    Sudharam

  • Issues with multilevel pie chart drill down with push button

    I am new to Xcelsius. I am trying to build a multilevel pie chart drill down (one pie chart drilling down to another etc) and I am able to achieve that. Now I want to add a Back Button using Push Button so that I can go up.  When I preview, the Push Button goes into two state and I have to double click to go back.  Can anyone tell me what I am doing wrong. I am using the latest Xcelsius. [The source code is here|http://www.woofiles.com/dl-195360-3lTyVM8Z-piechartdrilldownwithpushbutton.xlf]
    Thankyou.

    Hi Murali
    This is exactly the same what i tried to do,
    Drill down to 4 levels State -> City-> store etc with 4 pie charts and similar push button to close each level to
    go back to previous chart, first run from 1 to 4 works fine, then after closing all the levels and when i am at the pie chart 1
    if i click any pie slice it will jump to Pie chart 4 straight,
    I tried tracking the issue, all i could find is some how the previous dynamic visibility values are back even after erasing
    the data with the PUSH button (Destination cell insertion with blank or 0).
    did you find a solution for this issue ?
    Thanks
    Chandra

  • Drill-down by inserting problem

    Hi Experts,
    I have created a report a basic one with accounts on rows and time in columns and have added some macros to it.
    Whe I double click a row to drill down it works, but if I click again, instead of collapsing it expand again.
    Has anyone had the same issue? Any idea about why it happens?
    Thank,
    Ana

    Hi,
    Please check the Drill down option enabled for your report. If it is
    1) Drill down by Inserting the arrow keys doesnt get activated, and you can roll back by double clicking the parent node again.
    2) Drill down by Overwriting the arrow keys will be activated and you can use that.
    Hope this helps,
    Regards,
    G.Vijaya Kumar.

  • Chart drill-down support

    Hi, guys
    Is chart drill-down supported for the web app  in CR 2008/CR XI  and how is it activated ?
    regards, TST

    Hi
    I'm  using CR XI R2 for the web site
    The drill-down feature works fine in the preview mode in CR 2008 but not in the CR viewer. at the web site.
    I sort out the way to activate the zoom feature by set autodatabind  property to false.
    But I´m not able to activate the drill-down feature for the chart at the web site
    regards, TST

  • SharePoint PPS Hide null or blank value in performancePoint chart drill down.

    Hi,
    I am using SharePoint Performance Point Service. Hide null or blank value in Performance Point chart drill down.
    Thanks & Regards
    Poomani Sankaran

    Hi Hyaron,
    I am unable to reproduce the issue in my test environment. How did you add the drilldown feature? Were you doing that by setting visibility of the column or of the group? Please ensure to add the drilldown functionality by set the visibility of the workgroup
    from the Grouping Pane in the Report Designer.
    How did you add the Interactive Sorting on the headers of the two columns? Based on the drilldown functionality, the Interactive Sorting on the second column doesn’t work. So, you can move the Interactive Sorting on the second column. When configuring the
    Interactive sorting on the first column, you should set the parent group to sort, and sort by the field that the parent group groups by.
    Hope this helps.
    Regards,
    Mike Yin
    TechNet Community Support

  • Limits the PerformancePoint Analytic Chart drill down dimensions

    Actually my requirement is, how to limits the Performance Point Analytic Chart drill down dimensions.
    I am using SQL Server 2008 R2. Is it possible to achieve it in SQL Server 2008 R2 without 
    Perspective?
    I should not change my system from SQL Server 2008 R2 to SQL Server 2012 for
    Perspective.
    Is there any other way to achieve it.
    Thanks in advance.
    Thanks & Regards
    Poomani Sankaran

    Hi Poomani,
    In your scenario, you create a Performance Point Analytic Chart, now the requirement is that limit the Performance Point Analytic Chart drill down dimensions, right?
    As you know, to limit the drill down dimensions, we can created a perspective in the cube that limited the visible dimensions to those couple of dimensions. In your scenario, you said that you need change my system from SQL Server 2008 R2 to SQL Server 2012
    for Perspective, right? We can create a Perspective on SQL Server 2008 R2 version. The links below might help.
    http://technet.microsoft.com/en-us/library/ms345316(v=sql.105).aspx
    http://www.jamesserra.com/archive/2011/06/performancepoint-wish-list-change-a-datasource/
    If I have anything misunderstand, please point it out.
    Regards,
    Charlie Liao
    TechNet Community Support

  • SharePoint Performancepoint Analytic chart drill down

    Hi,
    Anybody can tell me?
    In SharePoint performance point analytic chart drill down.
    The drill down showing all the dimensions from the datasource but instead of that. I would like to show only the required dimensions only. How to configure it?
    Is it possible?
    Thanks & Regards
    Poomani Sankaran

    Hi Poomani,
    According to your description, my understanding is that you want the drill down to show only the required dimensions.
    Here is an article about this issue, please check if it is useful:
    http://denglishbi.wordpress.com/2012/03/28/using-perspectives-with-performancepoint-services/
    In addition, as this issue is related to SSAS, I suggest you create a new thread on SQL forum, more experts will assist you with this issue.
    SQL forum:
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Build the Bar chart from Cross Tab which have 3 measures with cell refr.cal

    Hello Friends. I want to Build the Bar chart from Cross Tab which have 3 measures with Actual , Plan and Forecast
    But Issue here is each cell is defferent like i have to do different calculation for each cell for actual, plan, forecast
    like A = Jan act/Budget actual, Where as B = Feb Act/ Jan Budg+Febbdgt_March Budget
    So now when I right click to say turn to Chart it is not generating the chart
    Please help how to build bar chart since i do not have 1 key figure which i can drag and drop in view structure of chart so how to handle this
                             Jan,  Feb, March, Aprl, May, June
    Actual                  A       B       C     D
    Plan                     N       M       O     P
    Forecast
    SONIYA

    Hi Soniya,
    It will be better if you can get these keyfigures calculated from the BEx with the help of structures in the BEx.
    At the report level it will be complex to create these variables and also not sure whether going to work:
    But you can try something like this:
    A= If (L01 Moths="JAN") then Sum (Actual)/Sum (Bud) Else 0 similarly for other months.
    Then you need to create one more variable (measure) which should be plotted on the chart as:
    Final Act = If([L01 Month]="JAN") Then A ElseIf([L01 Month]="FEB") Then B ElseIf([L01 Month]="MAR") Then C
    Final Plan= If([L01 Month]="JAN") Then N ElseIf([L01 Month]="FEB") Then M ElseIf([L01 Month]="MAR") Then O
    similarly you have to create variables for Forecast, then finally you can plot final 3 variables in the graph.
    Hope it helps you.
    Regards,
    Rohit

  • Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

    Is there any way to link the individual rows of data to the corresponding bars in a bar chart so that each legend title appears simultaneously with its corresponding bar when creating a build? I can do it in a pie chart but can't in a bar chart.

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • Drill down of manual cross tab reports with Multi variable subreports

    I tried to make a subreport by setting the hyperlink on the group sum of a manual crosstab (http://www.tek-tips.com/faqs.cfm?fid=1219) by setting Hyperlink to another report object.
    The documentation said I should copy and paste the name of the report object in the sub report over into the field in the primary report.  As I don' t really know what a report object is this failed.  Further I found some code in a sample report to deal with subreports that have multiple parameters.  The code was unbelievable; it couldn't be right.  So, how do I link my subreports to my reports by passing two parameters to the subreports that represent the row and column label of a given sum.
    Further what are the fields in the hyperlink another report object from for:
    Select from: //do they want a query here?
    Report title: //The don't let you type in this
    Object Name: //This seems elective
    Data Context:// No clue on this either
    Thanks for any help you can provide
    p.s. This forum doesn't seem to use traditional bit code

    Thanks for the reply.  I looked through those samples and other samples.  The two cross tab samples I could find were CtossTab and Inventory CrossTab.  Neither has a hyperlink to a sub report and I believe those were actual cross tabs, not manual crosstabs.  When I scoured the web for an answer, all I could find was what was linked.  This is going 20 pages deep on google.
    Crystal crosstabs are 98% better than the excel power pivot or pivot table.  However, with Excel, you can drill down to the details automatically.  With crosstabs you can't.  I was hoping to replicate this by making each summary in the manual cross tab a hyperlink to a sub report that filters the details based on the row and column just as excel does.  There is no sample for this.
    Oh yes, I'm using CR XI

  • I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

    I am using a PC and when I try to download an ebook, I get a pop up prompt with the message `Error! Check Activation` - how to resolve this so I can download and view the ebook, thank you

    Hi Ablondel24,
    I understand that you are getting a 404 message when you access a website from a Mac, not a PC.
    First check the cache for the site:
    Reload the webpage while bypassing the cache using '''one''' of the following steps:
    *Hold down the ''Shift'' key and click the ''Reload'' button with a left click.
    OR
    *Press ''Command'' + ''Shift'' + ''R'' (Mac)
    Second try to [[Delete cookies to remove the information websites have stored on your computer]]
    Let us know if this solves the issues you are having.

Maybe you are looking for