Drill down on Fiscal year period shows results in 2 rows

Hello All,
My report has a requirement to analyze the data across different fiscal year. When the report is then drill downed on Fiscal year period the data is shown on 2 lines.
eg.
report run for 2010 and 2011 for material M1 and plant P1
data in out put:
1) No Drill Down
Material Plant 2010Price 2010Volume 2011Price   2011Volume
M1         P1     100           1000               110             1100
2) Drill down on fiscal year period it shows data as :
Material Plant Fiscal-Year-period 2010Price 2010Volume 2011Price 2011Volume
M1         P1     01.2010                  100          1000
M1         P1     01.2011                                                        110            1100
3) How the data is needed:
Material Plant Fiscal-Year-Period 2010Price 2010Volume 2011Price 2011Volume
M1         P1     01                          100            1000             110           1100
Any simple way to do this? i can not add the navigational attribute to 0FISCPER as i do not have the time to modify the standard object and get all the approvals.
Regards,
Vijay.

Hi Vjay ,
Try the below way
From you example
In the Rows Area Put
Material
Plant
Posting Period (FISCPER3)
In the Columns Area
Put FISCYEAR above Keyfigure Structure.
This will display the result as you require...
Regards,
Ravi

Similar Messages

Fiscal Year / Periods does not show properly in WebI and compunding

Hi,
I have few reports where I am using Fiscal Year /Period as filter.
I have created a Universe on the top of a SAP BI Query and did not do any customization.
Then I created a WebI report. In this report I created various filters beside Fiscal Year / Period. When I run report, filter window opens. I can select all other filters but when it comes to Fiscal Year / Period it does not show me the values I want to see. It shows AUG 0001, APR 0025 etc. I want to see AUG 2010, MAR 2009 etc so that I can select them and get the data of the required Fiscal Year / Period. In Cube I have the required data. If I select MAR 0010 etc I donu2019t get any data.
On the other hand if I put fiscal Year / Period in columns or rows it shows the right value.
If also run SAP BI Query and Fiscal Year / Period in Variable then on variable screen I can see the right value from where I can select and get the required result.
Do I have to do any step at Universe level or something else?
It seems that Fiscal Year / Period is compounding.
Is there any help?
Thanks
Bashir Awan

Ingo,
for thanks for igniting my thoughts in this regards.
Yes these values do exist in SAP BW.
It is some how compunding the values at filter level.
It does not let me see the whole value when filter screen popup in BOBJ.
In SAP whole value shows when variable screen popup, I see three columns Fiscal Year / Period. Text, Posting Period Key, and Posting Year Key.
Fiscal year / Period Text which shows Aug 2009, Posting Period Key which shows our period 1 to 16, and Fiscal year key which shows 2009 etc.
Is there any setting in BOBJ which compunds the year for variable screen so that we may see the whole values for filters?
thanks

F4 Help Option for fiscal year/period to show most recent one first

Hello Friends, We have audit team which wants this F4 Help for fiscal year/period to show the per/year in the current one first and then old one. Like 007/2007, 006/2007 -
012/2005
Please tell me if there is any Settings in Web template or in BI to make this work. Please help asap since auditor are required to test the reports for SOX.
Thanks
Regards
SK

i don't think it's possible... if you want you can restrict it to fiscal year 2007.

Text Variables to show Start and End Date of Fiscal Year Period

Hi,
I am creating a query that has user enter a starting fiscal year period and posts information by Fiscal Year Period going back 14 periods. I am able to put the fiscal year period in the heading for all periods, but would also like to add the start and end calendar day for each listed period. Can that be done using a replacement path text variable or is that something more for a customer exit variable?
Thanks in advance for any thoughts provided.
Bill

Hi,
This is one of my exit that display the calmonth (offset -12). Usefull when I have to retrieve in a KF a complete rolling year depending one calmonth.
S_VMUCMN is my selection variable
S_TXTCMN_M12 is my text variable calmonth-12
S_TXTCMN_M0 is my text variable for selected calmonth.
WHEN 'S_TXTCMN_M12'.
    IF i_step = '2'.
      LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'S_VMUCMN'.
        CLEAR l_s_range.
        " First day of the selected month
        CONCATENATE loc_var_range-low '01' INTO l_calday.
        CALL FUNCTION 'YFRBW_FUM_CAL_DATE_IN_INTERVAL'
          EXPORTING
            date      = l_calday
            months    = 12
            signum    = '-'
          IMPORTING
            calc_date = l_calday.
        l_s_range-low = l_calday+0(6).
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Thus, in KF header you have to put the two text variable to display the complete period.
Hope it helps,

Web Report not printing the fiscal year period variable value

Hi,
In web report where in one text element, we enabled the fiscal year period variable value to display
in the report result.
If we run the report then this fiscal year period is displaying in the general information.
We have print button (Java Code), where user can take a printout of the same report.
In the printout this Fiscal year period is NOT PRINTING, other variables like rollup time, technical name of report etc are printing perfectly.
It is required to print the fiscal period also in the print out of the report.
Any help to come out of this.....
Thanks
Srinivas

Hi
Any Help.....
Srini

Formula to calculate two fiscal year/period difference for non null quantit

We'd like to have a query result like the following:
Person -- Jan_2007 -- Feb_2007 -- Mar_2007 -- No. of Months
Tom --- 21 --- 54 --- 10 --- 2
John --- 0 --- 3 --- 15 --- 1
In the above query, the row is sales persons, the 1st three columns list the sales quantity by each sales person restricted by fiscal year/period and we would like to create 4th column "No. of Months" to calculate (will use formula) the month span (difference) for each sales person from his last sale activity (the last month he performed sales) and the 1st sale activity (the first month he performed sales) as listed in the above query result, e.g., Tom performed his first sales (sales quantity: 21) in the month of January of year 2007, and he performed his last sales (sales quantity of 10) in the month of March, 2007, then the "No. of Months" column value for Tom is 2. The calculation formula will be performed based on the last quantity value (> 0) to trace it's corresponding column fiscal year/period value (max of the fiscal year/period value with quantity value >0) and on the 1st quantity value (>0) to trace it's corresonding column fiscal year/period value (min of the fiscal year/period value with quantity value >0) and then do the subtraction between the max of the fiscal year/period value and the min one.
Would be appreciated if BEx experts here give the detailed steps on how to build up this formula to calculate the number of month difference and we will give you reward points!
Edited by: Kevin Smith on Mar 18, 2008 1:47 PM

hi Danny,
I only gave an example of 3 columns, but actually, yes, the report can have more than 12 months, e.g. from Jan_1999, Feb_1999, ..., Mar_2011, Apr_2011.
In our simple example of 3 columns for the three consecutive months, if John had (3)(0)(15), then the No. of Months is 2, or the last month value he performed sales and 1st month he performed sales.
You said macro in Excel sheet? Not sure if macro will work on web since we will eventually run the reports on web browser, therefore we still prefer using Formula.
Any idea/solution?
Thanks!

Current month and previous months of fiscal year period data

Hi All,
My requirement is end user will enter month ie (fiscal year period ) and in report my requiremnt is to show data in two columns 1.Current month data and
2.April till date.
Please let me know how to do this and please send the coding to be done in CMOS.
Regards

Hi,
In your query, you should have following object :
in filters:
fiscal period object, with an user entry variable on it (UE_MONTH)
in rows/ratios:
Current month column, with your KF and a restriction on 0calmonth2 with an customer exit variable on it (ie: CE_VAR1)
same for April column. (CE_VAR2)
in your customer exit, CMOD, step 2, add these two cases :
WHEN 'CE_VAR1'.
READ TABLE i_t_var_range WITH KEY vnam = 'UE_MONTH' INTO
                   intern_range.
CONCATENATE intern_range-low(6) sy-datum+4(2) INTO l_s_range-low.
l_s_range-sign   = 'I'.
l_s_range-opt    = 'EQ'.
APPEND l_s_range TO e_t_range.
Same for April, add a new case and just replace sy-datum+4(2) by '04'.
Hope it helps,

Up to the period : Fiscal year period Exit variable is not working

Hi Experts,
I have the following code to get the upto the Fiscal year period variable .It shoudl fetch the Values From the starting of the Fiscal period like 2009001 whatever the period user enters.But currnelty it is not woking.Please let me know am I doing any mistake in code.currently it is only fetching for the month user enters not up to the period.
Prasad
Variable Name : ZUPTOPER
User Entry Var : 0P_FPER
WHEN 'ZUPTOPER'.
    IF i_step = 2.
      LOOP AT i_t_var_range INTO loc_var_range
      WHERE vnam = '0P_FPER'.
        fper = loc_var_range-low.
        fper+4(3) = '001'.
        CLEAR l_s_range.
        l_s_range-low      = fper.
        l_s_range-high     = loc_var_range-low.
        l_s_range-sign     = 'I'.
        l_s_range-opt      = 'BT'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.

Hi Prasad,
This would be happening if you have put the user entry variable in the global filter of your query.
As a result the complete data set is restrcted to get the data only for one month.
Please use the variable for user entry month in a selection and not globally.
-Vikram

Issue with Fiscal Year period - Variable

Hello,
I have requirement where I have two fiscal year variables selections available for the users. Both are independent to each other. FOR EX: A & B
1ST Fiscal year period is straightforward. It is a single variable selection where User enters the fiscal year period then the Key figures data will be available to the user for that particular fiscal year what is selected in the variable screen.
For ex: If user enters 01.2007 then the values will be only for that particular month/period
However, the 2nd Fiscal year period user wants a Range (From and to). This is also a Single selection variable. Here user enters only TO value, which it should go and get the lower value from first variable screen and then it should take the higher value from the 2nd Variable screen and should calculate the result as a range.
How this can be sorted? Can someone please help me to sort this Issue? If we need a customer exit, can you please give me some sample code?
Thanks in advance
Harish

Hi,
Create 3 variable
One for from variable which will user input ZVAR1
2nd to variable will be user input ZVAR2
3rd variable be variable exit type ZVAR3
In exit populate the VAR3 by reading the two user input variable.
and use the option
Try this:
 when 'ZVAR3.
 if i_step = 2.
 read table I_T_VAR_RANGE into z_t_var_range
 with key VNAM = 'VAR1'.
 read table I_T_VAR_RANGE into z_t_var_range1
 with key VNAM = 'VAR2'.
 ZE_T_RANGE-SIGN = 'I'.
 ZE_T_RANGE-OPT = 'BT'.
 ZE_T_RANGE-LOW = z_t_var_range-LOW
 ZE_T_RANGE-HIGH = z_t_var_range1-LOW
 APPEND ZE_T_RANGE TO E_T_RANGE.
 clear ZE_T_RANGE.
 ENDIF.
Thanks,
Debasish

Text variable for Fiscal year/period

Hi gurus,
We are on BI 7.0 (PL 15). In G/L i am using the standard 0FISCPER text variable 0T_FPERF in the columns, which should e.g. produce the text "04.2008".
However instead it displays "4 .0800". Adding Fiscal year/period 0FISCPER to drilldown shows a correct format in the rows "APR.2008", so the problem seems to be only with the text variables.
I have checked on a reference 7.0 system where the same variable is working fine, so i assume that some fix must be available. Any hints as to what should be performed to correct this display error?
Points will be rewarded.
BR
Morten

Hello Jamspam,
I had a similiar problem with indicators in BEX. I had an numerical indicator that displays me value in a very weird way.
My solution was to upgrade my frontend, with SAP Business Explorer patch.
Have you got the latest BEX patch (or others) on your frontend? No guarantees that will solve your case, but for me it worked
Regards,
Bruno

Can we only year value from "0FISCPER" (Fiscal Year/Period) at BEx level

Hi all,
I have two time characteristics "0FISCYEAR" (Fiscal Year) and "0FISCPER" (Fiscal Year/Period). In DSO initially "0FISCPER" was there and later request came to add "0FISCYEAR". Now data in char. "0FISCPER" is since beginning (from 2000) and for char. "0FISCYEAR" is since 2010.
User's requirement is to create a report which will display data Year wise.
My issue is if i am using "0FISCYEAR" then user is not able to see year instead it shows #. I dont want to do data reloading as this is GL data and hold huge no. of records in it.
So my concern is : Is there any way to use only year value from "0FISCPER" (Fiscal Year/Period) at BEx level? Is there any setting which I can apply and get the same value of Year as I can see from "0FISCYEAR". Please assist me on this.
Thanks,
Arvind

Hi Arvind,
Your requirement can be realised through virtual characteristics.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b04be008-86cc-2c10-4bad-e517ea3f4c80?QuickLink=index&…
however, I would still suggest to reload the data. you will only need to reload years before 2010 and you can do this in phases.
Hope this helps.
-Swati.

BSC: Display values for Fiscal Year/Period

Hi all,
We are trying to create a small test scenario to know about balance score card. We have a cube which has Actual and Plan data in one KF diffentiated based on Value type character. Time character is fiscal year/period.
We want to display a graph which displays actual and plan for fiscal year/period wise. But when we execute the score card it shows the total year's plan and actual for the individual fiscal year/period. But ideally it should display actual and plan for the respective fiscal year/period.
we have created two value field in the measures of score card. and formula a/b (Plan / Actual ) is used.
Please guide us in solving the problem.
Regards,
PM


Hi
 
Do you have Fiscal Year Period in the Rows of your BW Report? If not, please try that.
 Hope it helps.
 
Cheers
Abhijit
 * It's a good habit to reward someone with points in SDN if you think his/her
response was helpful to you

0PU_IS_PS_41 not picking up Fiscal Year Period 001-016

Hi All,
While we are executing the Datasource :0PU_IS_PS_41(Budget Totals Records in Funds Management) in RSA3.However the Fiscal Year /Period is 000/2008..2009 in all of the cases is only picked up, the relevant FMAC Amount is 0 and it is not picking up any other Fiscal Periods like 1-16 at all .We have observed that this has relevant amount in the FMBDT Table for the Fiscal Periods .
Could you please suggest what we need to do so the the extractor shows up FiscalYear Periods 1-16 and the relevant amounts against it.
Regards,
Sasidhar G

Hi M,
Fiscal Year/Period 000 is used for Carry forward balances. However we dont any amount for period 000 and DS is correctly picking up amount 0 against the Fiscal Year Perod 000 .However it is not picking up any other Fiscal Year Periods like 1-16 in our Development system,
Regards,
Sasidhar Gunturu

Selection criteria is fiscal year/period but need to restrict KF by date

Hi,
I have query where selection criteria is based on fiscalyear/period and in result I need to have Netvalue for all the sales order by created on date for that fiscal year/period.
For eg if I have entered fiscal year/period as 008.2007, I should get net value for all the orders that have created on date between 08/01/2007 to 08/31/2007.
Can anyone help me about this please.

Hi DV
Here is the code
put it in I_STEP=2
WHEN 'EXIT NAME"
READ TABLE I_T_VAR_RANGE INTO loc_var_range with key vnam = 'userinput variable name'
v_fiscal_year = loc_var_range-low_0(4)
v_period = loc_var_range-low+4(3)
CALL FUNCTION 'FIRST_DAY_IN_PERIOD_GET'
          EXPORTING
            i_gjahr              = v_fiscal_year
          I_MONMIT             = 00
            i_periv              = Give your fiscal year variant name
            i_poper              = v_per
         IMPORTING
           e_date               = v_date_beg
         EXCEPTIONS
           input_false          = 1
           t009_notfound        = 2
           t009b_notfound       = 3
           OTHERS               = 4.
        CALL FUNCTION 'LAST_DAY_IN_PERIOD_GET'
          EXPORTING
            i_gjahr              = v_fiscal_year
          I_MONMIT             = 00
            i_periv              = Give your fiscal year variant name
            i_poper              = v_per
         IMPORTING
           e_date               = v_date_end
         EXCEPTIONS
           input_false          = 1
           t009_notfound        = 2
           t009b_notfound       = 3
           OTHERS               = 4.
        CLEAR s_range.
        MOVE:
          v_date_beg TO loc_range-low,
          v_date_end TO loc_range-high.
          loc_range-sign = 'I'.
          loc_range-opt = 'BT'.
        APPEND s_range TO e_t_range.
Thanks
Tripple k

FM for month and year to Fiscal year period

Hello ABAP Experts,
Please suggest a FM to convert month+year to fiscal year period.
Suggestions appreciated.
Thanks in advance,
BWer

use the function moduleGM_GET_FISCAL_YEAR
pass date and fiscal year variant as 24..
see all the values of the fiscal year variant in the table T009
Check with fm FI_PERIOD_DETERMINE
Thanks
Seshu

Drill down on Fiscal year period shows results in 2 rows

Similar Messages

Maybe you are looking for