Driver Utility Task Sequence Process/Examines all the driver Packages in the T/s, Although it actually should install only 2-3 Drivers for a particular Computer Model

Hi,
Although the Driver Utility Task Sequence is working fine as expected, i have noticed that after initiating the Driver Utility from from the Software Center it takes quite a long time to start the installation of the drivers and few Apps which are in chain
I have pasted the log from a Computer which shows that it checks/Processes all the packages which are in the T/s and that is where it spends the time, although for this model it has to install just 3-4 drivers
Can we do something about this, to make the installation process just checks/Examines the drivers which are associated under its Specific Model Tree and saves time. ( Fyi there are around 14 Different Models of Laptops/Desktops which are separated
by folder and a WQL Query to identify the Model.
could not paste the log file as its too long
Thank you,
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Is there a specific need that you need to update the already installed drivers or is this just something that someone
has always done and it will always be done? Give it a thought for a moment.
We dont upgrade the already installed Drivers, its just installed when a machine is newly imaged / reimaged
so whenever a new image is being engineered, simultaneously we create a new T/s with updated drivers and that goes to production along with the new image release
Thank you all for your replies, looks like the only option at this point is to workaround with splitting the T/s
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Similar Messages

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? Also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard 10.6.8?

No and Yes
Don't use TM for this purpose, clone your drive to an external, plug the external into another MBP and reboot from it. Please note that booting a machine that came with Lion may not be possible from a drive with Snow Leopard.

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

What are the business drivers for doing SAP BW Modeling

What are the business drivers for doing SAP BW Modeling
a.     Simplicity
b.     Flexibility
c.     Performance
d.     Cost
e.     Administrative Overhead

Hi Kumar,
I will give just hints rest you have to think and act not about Interview quotations but SAP MM career.
There are couple of guys and all of them has got job, first as a SAP testing, as SAP freshers in HCL/HP India etc.
Later on they have learnt all the business process in project and all the E2E cycles in MM/SD/FICO etc.
Now they are working on support projects and roll out projects.
I think there are ways and we need to understand how to explore all the job possibilities.
Please have good knowledge and definitely you will succeed. Short cuts are not always the way to success.
Hope all my fresher friends will find some clue here....
Regards,
D Singh

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

What?
You want to control iTunes on your computer using the Remote app on your iPad?
And you want to connect the iPad and computer through your Nokia?
No, this will not work.
Just create a network with your notebook.

Can I specify the "root package" of the Library?

Can I specify the "root package" of the Library (currently seemingly hardwired as "components") so that the generated code has sensible package names i.e. "com.adobe.buttons.HelloWorldButton" rather than "components.HelloWorldButton".

Hi Graeme,
Not from within Flash Catalyst. However, if you are taking your project into Flash Builder you will be able to customize the package names there.
Best,
Tanya

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

I am a student who subscribed to the 9.99 photography package, I didn't realize there was a discount for students. I would like to upgrade to the full package with the student discount. I can not find the option for this. How do I do this?

Hi Djmontanalv,
Please go through the link below.
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Regards,
Anand

How To Install and Configure External Drivers for the JDBC & JMS Adapters

Hello colleagues,
Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
VERSION 7.10.
BBDD ORACLE - ojdbc14.jar
Regards.

Hi ,
Uisng Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
refer this two links,the procedure available how to deploy using JSPM.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
Regards,
Raj

I purchased the photography package and the photoshop shows as a trial version.

I purchased the photography package and the Photoshop shows up as a trial version. Just wondering what to do to fix this issue. Thank You!!

Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchsed a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears ro work but I am being told there are updates. I hav

I have a desktop machine windows 7 based with CS5 loaded and working without problem. I have recently purchased a laptop running 8.1 windows. I have loaded the cs5 package onto the laptop and it appears to work but when I try to update, although I am being told there are updates it attempts to download the update but then tells me there is a problem and to quit and try again later.. I have tried a number of times to download the updates but itkeeps telling me to quit and try later. what is wrong please?

There could be a 32 bit vs 64 bit issues-is the old machine a 32 bit? and what is the new machine as far as 32/64 bit. I am not sure now if CS5 has in the help menu of the PS app the selection to update within PS if so that might work. I know that the Creative cloud app for installs updates etc has caused me much consternation over the last couple few years. Last it could be something like your Software firewall settings or anti-virus anti malware programs. I know that updating the infamous adobe flash that Internet Explorer pop ups setting and having AV turned on as opposed to off can interfere or plain break the update ability

Using a environment variable that was created during the Task Sequence process - SCCM 2012 R2

Hi,
I'm triyng to use a environment variable that is create in the beginning of the Task Sequence.
1. I'm using a VBScript that get the Exit Code of an application, and create the environment variable "iReturn" with the value of the exit code. (This is working)
2. I add this variable in the CustomSettings.ini, like this "iReturn=%iReturn%
3. After the step that I run the VBScript I put the "Gather" step to get the variables, but looking in the BDD.log the iReturn variable appears the same as the CustomSettings.ini configuration "iReturn=%iReturn%". (But, if I put a "Restart
Computer" step after the VBScript, the BDD.log shows the iReturn variable with the right code.)
Question: How can I update the environment variable of Windonws XP to use in the Task Sequence without restart.
OR
How can I configure autologon in SCCM 2012 (if have no way to update withou restart computer).
I already tried the autologon with registry settings and a specific user, If I starts the process with this user works, but If I starts the process with other user, after the autologon the process doesnt continue, I have to do logoff and login with the user
that I started the process.
PS: All this steps have to be executed before the WinPE phase.

Environment variables must be explicitly set every time a system boots so unless you have a process to repopulate it after the reboot, it won't persist automatically.
Why not store the value in a task sequence variable so that it persists after a reboot?
Jason | http://blog.configmgrftw.com | @jasonsandys

I just upgraded my hard drive. now how do i get all my stuff back onto the computer

I just got my iMac back from repair. I had to replace the hard drive. The Geneus people wiped the drive and said all i have to do to get my desktop back the way it used to look, with all my pictures and documents and stuff, was to install from a time machine or external hard drive. WHen I plugged my hard drive to import everything nothing happened. So i skipped the step. Now how do i go back and install evertything?

It doesn't just happen, you have select the backup.
Start from scratch - Insert the Installer DVD and boot to it by holding down the C key on startup. OK the language page, then go to the menu bar (don't touch the continue button yet).
From the Utilities menu select Disk Utility.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.). Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need. Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears, quit DU and continue with the installation.
When asked if you want to migrate from another source, choose either Time Machine backup or another drive, as appropriate. If it's not connected, you'll be prompted to connect.
You can choose what to restore - user data, applications, preferences etc.
It's best to do this now, rather than create an account and then use Migration Assistant; MA will create another account and you'll have problems accessing your data.

I had my hard drive redone and reinstalled itunes losing all of my music. How do i get my 300 plus songs back on my pc for hearing pleasure?

I am worried that i have lost all songs which i purchased through the store. I cant access the music but in the account history i am able to see that i did buy and download into my library. would like to know how i can get all music and movies back where i can enjoy them again. thanks for your help.

What country are you in ? In some countries you can re-download past music purchases, but films can currently only be re-downloaded in the US (and not all films). Have you not got a backup of your purchased content on, for example, an external drive ?

Recently buyed the new OS X on apple store and when it should install gaved me error . Whats next?

Recently bought Mac OS X Lion and when i tried to install gaved me error while intalling OS X

Are you installing Lion over Snow Leopard or updating a previous version of Lion?
If the former then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If the latter then do this:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Now retry the installation of Lion you were doing when you got the error.

How do i get at the data in the data package of the start routine

I have some very simple code in my start routine but it says data-package is not a table but it is SAP code that defines it this way. here is my code
SELECT DOC_NUM S_ORD_ITM CH_ON CREATEDON INTO TABLE T_ORD_BKG_DATA
FROM DATA_PACKAGE.

Hi,
The data package is not a DB table, but an internal table.
You will have to use a LOOP statement to get at all data :
    LOOP AT SOURCE_PACKAGE INTO w_SOURCE_PACKAGE.
      IF w_SOURCE_PACKAGE-myField = '98'.
      something to do
      ENDIF.
    ENDLOOP. " SOURCE_PACKAGE
Hope that helps.
Dieu

Driver Utility Task Sequence Process/Examines all the driver Packages in the T/s, Although it actually should install only 2-3 Drivers for a particular Computer Model

Similar Messages

Maybe you are looking for