How do i get at the data in the data package of the start routine
I have some very simple code in my start routine but it says data-package is not a table but it is SAP code that defines it this way. here is my code
SELECT DOC_NUM S_ORD_ITM CH_ON CREATEDON INTO TABLE T_ORD_BKG_DATA
FROM DATA_PACKAGE.
Hi,
The data package is not a DB table, but an internal table.
You will have to use a LOOP statement to get at all data :
LOOP AT SOURCE_PACKAGE INTO w_SOURCE_PACKAGE.
IF w_SOURCE_PACKAGE-myField = '98'.
something to do
ENDIF.
ENDLOOP. " SOURCE_PACKAGE
Hope that helps.
Dieu
Similar Messages
-
ok, I hope that my description of this problem does not come out in such a disorganized fashion that it makes the description difficult to follow. here goes: every 30 seconds to 1 minute (or thereabouts, I'm estimating) my mobile phone's browser (whether Firefox or any other) loses the data signal, so that tje next time that. I click on something, I get an error message that the "data connection timed out, retry" or "network unavailable" or "check that you are connected to that internet", etc. etc. etc. I have downloaded many apps that are supposed to boost data connectivity and/or improve internet speed, blah, blah, blah, till I discovered that was a problem with the server being able to keep up with staying locked onto my browser. in one of these apps diagnostic screens, I found a notation that therr was something wrong with my cell's relative position. well, how could that be, I wondered, since I had "GPS tracking" "GPS reporting" and "location sharing" all enabled? but, then I noticed, on the image of my cell's location as represented by this particular app, that every half minute, or so, the blue dot which represented my cell's location would slip to the left about one quarter of an inch, or so, and in the longitude and latitude part of this app's diagnostic screen I saw that the numerical designations of my cell's longitude and latitude were zero and zero. it suddenly occurred to me that the server had lost sight of my cell because my cell had moved too far out of the range of that server's sight due to the rotation of the earth. well, blow me down, what am I supposed to do to fix that? how can I tell my cell phone's OS to send out some kind of identifying info on a constant basis, so that the server could keep track of it (and I would not lose the signal)? or, conversely, how could I get my cell phone's browser to grab onto the signal and not let go of it until I was done with that internet session, at which time I would then manually release the signal myself? I hope that my explanation of the problem made enough sense that you could follow it and that you can come up with a workable solution for me. oh yeah, my phone is an LG OPTIMUS ELITE 696. thanx, from the enragedkangaroo.
Hello,
I'm afraid I don't think there is going to be much we can do to help you here. The description sounds like an issue with the phone rather than with Firefox specifically.
I don't think the problem can be caused by you moving out of range of the cell, due to the rotation of the earth. The cell towers (that provide phone signal) are sitting on the earth, just like you, and so move at the same speed as you. This might be a concern with satellite phones using Low Earth Obit satellites but this isn't the case here.
I think the best thing to do would be to get in touch with your Phone Operator or Device Manufacturer for support. If you are out of the support period or can't get support from them for some other reason then a standard 'cure-all' for mobile phones is to do a Factory Reset. This will return your phone to its default factory settings and wipe all of your data / modifications off the phone. This tends to solve most problems and is probably what the official support team would tell you to do. I can't guarantee that it will help but it has a good chance.
There are instructions on resetting your phone here:
http://www.hard-reset.com/lg-optimus-elite-hard-reset.html
I hope that helps. -
I reinstalled my OS and now it wants to empty my phone. How can I get it to back up my phone without removing the data?
You can't. But if you backed up your computer prior to wiping it out, you should be able to restore your iTunes library, contacts, photos, etc. from that backup. Once you do, you can set the phone up again and just sync everything from your library back to it.
If you didn't back the computer up either, you can transfer items purchased on the phone into iTunes, and if you set up at least one contact in whatever application you sync your contacts to on the computer, it will offer to merge the address books on the first sync, saving those. Any media you'd acquired from sources other than the iTunes store will have to be re-downloaded from the source or re-ripped.
The iPhone is NOT a backup device. -
How do I get access to my backed up data in the iCloud?i
How do I get access to my backed up data on the cloud?
Just go to iCloud.com and log in. Choose iCloud Drive if you are looking for documents that you lost on your mac and had put into iCloud drive prior to your hard drive dying. Contacts, Mail, Calendars will all be there under the log in to choose from.
-
How can i get to itunes to store all data on an external drive
how can i get to itunes to store all data on an external drive rather than the drive ITUnes run off. I can get photos and music off but my apps and movies seem to go to the drive where itunes is run from?
See if this helps:
http://support.apple.com/kb/HT1364 -
How can i get my oxygen 8 to transfer data into Logic?
i use an Oxygen 8 midi-keyboard and the Presonus firebox-interface with my Logic pro 7.
how can i get my oxygen 8 to transfer data into Logic?
its like there is no connection between the two.
but its not the cables, since everything was running fine before.
can anybody help me ?Go into the Audio MIDI Setup utility and check to see if you see it there. Considering that the Oxygen 8 is class compliant, you should just be able to plug it into the Mac. Perhaps, all it needs it to be recycled (turn it off and on again).
jord -
I have both safari and chrome, because I'm used to chrome. The only extension I have is Google docs. I started getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer? People suggest programs to do it, but how do I know they won't make it worse?
Is someone from Apple here and can answer?
Thanks!You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
How do I get permission to save an Adobe Illustrator template in the templates folder in Windows 8,
How do I get permission to save an Adobe Illustrator template in the templates folder in Windows 8, CS5?
The wonderful people at MICROSOFT forum helped with this problem, I will post response here:
Enable the permission and check the issue status.
a. Right click on the folder and click Properties.
b. Click Security Tab, click Edit under Group or User Names and click Add.
c. Type “Everyone” and click check names.
d. Click Ok.
e. Click Full Control under Permissions for everyone.
f. Click Apply and click Ok.
g. Click Ok.
Templates are to be saved in the following location:
System folder (username:) \ App Data \ Roaming \ Adobe \ Adobe Illustrator CS5 Settings \ en_GB \ New Document Profiles
this is using CS5 on Windows 8 -
How do i get number of days between 2 dates?
How do i get number of days between 2 dates?
and the result must be in int.
for example
Ex. startdate: 2006-06-01 enddate: 2006-06-30 and the result is: 30
how to do so? thxmel
Iv'e used this method. It assumes startdate,enddate and days have been defined before but you could pass them as args.
void days()
try
Date d1 = DateFormat.getDateInstance().parse(startdate);
Date d2 = DateFormat.getDateInstance().parse(enddate);
long days = (d2.getTime()-d1.getTime())/1000/60/60/24;
days = ""+days;
catch (ParseException e)
System.out.println("Invalid date format");
}It actually gets the duration in ms and divides down to days.
Regards
Chris -
How can I get number of days between 2 dates ?
How can I get number of days between 2 dates ?
Give me answer as soon as possible.....Mukesh_Prajapat wrote:
How can I get number of days between 2 dates ?
Give me answer as soon as possible.....Is google broken again?
[How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] -
How can i get number of days between two dates represented by two dates?
how can i get number of days between two dates represented by two date objects. One is java.sql.Date, the other is java.util.Date?
tej_222 wrote:
But how do I do that conversion. from java.sql.date and java.util.date to calender?
-thanks for the quick response.You may find the following utility code samples useful:
[http://balusc.blogspot.com/2007/09/calendarutil.html]
[http://balusc.blogspot.com/2007/09/dateutil.html]
ganeshmb wrote:
(date1.getTime() - date2.getTime())/(1000*60*60*24) should do.
getTime returns millsecond value of date object and the difference divided by no of milliseconds in a day should fetch you the difference in terms of days.This doesn't respect the DST. Use java.util.Calendar. -
I have a disabled iphone i forgot my passcode, how can i get it unlocked without loosing my data?
As the manual says, you will have to restore your iphone.
-
How can I get ALL of my Google Calendars to show on the iCal on my iPhone?
I see all of my Google Calendars on the iCal on my Mac, but I do not see them in the iCal on my iPhone. I only see one Google Cal, but not the others.https://www.google.com/calendar/iphoneselect
-
my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help
I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck
-
How do you get iTunes purchased songs to automatically play one after the other
How do you get iTunes purchased songs to play automatically one after the other without having to hit play for each song ? Also I lost all my pictures on my iPad when I installed iOS 7 upgrade. Any way to get them back? Thanks. Dr Ron.
Hi Dr. Ron,
By your question, I am wondering if you are playing your music from the iTunes app rather than the Music app?
In the Music App, you can go to any of the options at the bottom and click on a song to play and it will then continue to play the songs in that category. You can also select "Shuffle" to shuffle them.
As for your Photos, did you have them backed up anywhere?
Cheers,
GB -
I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?
I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone.
Maybe you are looking for
-
Coding in user exit in program rffous_t
The ACH file generated has to be updated with company specific information required by the NACHA file format standards. SAP functionality will be used to generate the interface file. The ACH file will contain all employees who have pay for the curre
-
How to compare the date in filter.......
Hi, I want to put the filter on the expiration date in Free characteristics. I need all the stock for which the expiration date is less than or equal to the current date. I guess I need to create a variable for this , any suggestions ? Thanks , Jeet
-
Using S_RS_AUTH in VALUE HELP ?
Hi, thanks for your time. I have problems with the use of the subject to S_RS_AUTH in BI 7. For example, my object is ZCOUNTRY_CL and used 0COUNTRY with the "CL". In the "Value Help" from Visual Composer displays all countries, while in BI7 shows onl
-
File Size Improvements in CS4?
I have found someinteresting things in CS4. Doing the same project as last year my total file size seemed much smaller. I opened my catalog from last year. 32 pages/tons of images 1.5 gigs. I saved that file as another name which trims size. The sie
-
Acrobat X moving edited objects
To edit an object in a pdf I select the object, right click, then edit in Illustrator CS6 or Photoshop CS6. However, after saving in Ai or Psd and going back to the pdf file, the edited object has moved from its original location. I have not moved it