Drivers installation problems after replacing Win Xp Home Ed by Win Xp pro.

Help needed.
I have a Toshiba stellite M70 -SR2(purchased last December), which came with Win Xp Home Ed pre-installed on it. I remove the Home Ed and installed my XP pro Spk2. Now I can't get my wireless connection to communicate with my Linsys router so I can connect to the internet, the video card can't be installed,...
I only managed to download and install the sound drivers and the modem drivers.
I downloaded the Display Drivers, unzipped the file but unable to install them like I managed with the sound drivers.
In my device manager screen I still get a yellow marke in front of:
-Eternet Controller
-SM Bus Controller
-Video Controler (VGA Compatible)
Can some one gives instructions on how to get and install these drivers or where can I find the instructions.
Thankx

Hi
Well, the right installation order is very important because some drivers and utilities cannot be installed without the other drivers.
I recommend to follow the installation instruction and to install the whole stuff.
If you dont need something so you can remove it from the OS in Add & remove software.
To solve the yellow question mark problem you have only to install the drivers.
Chipset driver (at the beginning), Lan/Wlan driver, display driver.
But if you follow the installation instruction you shouldnt get any yellow question marks.
Regards

Similar Messages

Is anyone still having discrete graphics card problems after replacement

Is anyone still having discrete graphics card problems after replacement?
Macbook Pro eligible for replacement through Apple program.
Submitted my computer 2 days before program came into effect.
They replaced card or logic board with same original model: AMD Radeon HD 6770M 1024 MB
Issued me a refund check for my repair.
Seems to have some noticeable issues, fan running more than usual again, and temporary graphic lines,
but disappear too fast before a screen dump...
Is anyone who has participated in the replacement program received a different graphic card for
Model Macbook Pro 17" (late 2011)
Thank you for the reply.

Unfortunately I have yet to call AppleCare because I am on a project for 3 weeks and cannot be without my laptop during that period....
Until that time I am trying to figure out what I can do to protect the Palm Rest/Mouse Pad area of my Macbook once they either fix it or give me a new one. Has anyone had any experience with either of these products that can provide some input as to whether they are good or bad?
http://www.marware.com/cgi-bin/WebObjects/Marware.woa/6/wa/selectedCategory?cata logCatID=224&wosid=djXnz6k0JQiXbGEX7Stos0
http://www.powersupportusa.com/products/macbook-wrtp.php?category=mb

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Satellite L750 - drivers installation problem

Hello good people of the internet,
I have a problem with drivers' updates/installation on my Satellite L750-1E3, Windows 7-64 bit.
When I launch the installer, it decompresses, telling me it will launch afterwards, but then the window closes and nothing further happens.
I've read about the same problem one person here had with the L855-10P series but, maybe because I'm a girl or maybe because I'm not a native English speaker, I didn't uderstand what to do...
I actually have problem with more things.
My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer".
So I tried to reinstall the driver but the problem I described above appeared.
The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
And the last one, for about a month there are problems with the sound on my notebook.
First cracking of sound and then it stops working completely and I have to restart the computer.
Again, I tried to reinstall the sound drivers.
There are two drivers on the Toshiba site, one of them reinstalled just fine but the other one (nvidia, I think) had the same problem as the other drivers.
Someone please tell me what to do, because I am becaoming really desperate and I seriously considered throwing my notebook out of the window.
Thank you

Usually the HDD recovery is the easiest to get the notebooks factory settings and to get it running again.
>My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer". So I tried to reinstall the driver but the problem I described above appeared..
Its interesting to know if the webcam or an unknown imagine device (probably webcam) appear in device manager. Please check this.
If the webcam isnt listed there, you should check if the webcam is enabled in BIOS.
To access the BIOS press F2. Then go to Advanced tab -> System configuration -> webcam
If the webcam is enabled in BIOS but still not recognized and not listed in device manager, then you should recover the notebook to factory setting to check if the webcam module isnt faulty.
>The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
The Blu-ray player update works only for notebook equipped with blu-ray drive. If your notebook does not support blu-ray drive

Win 7 Home Edition to Win XP Pro Sharing

I'm trying to send files to my Win XP Pro from my Win 7 Home Edition to repair the Win XP files,I have a cross-over cable connection,I got the XP to ping the Home Ed. Now can I or do I ping or just start sharing from Win 7 to Win XP? Please
answer asap

Hi,
Please refer to this guide to correctly connect the two machines together, it can take some time for that XP computer to appear in the Network window in Windows 7. You might need to move both computers to the same workgroup. Meanwhile
make sure to "Turn on network discovery and file sharing", After the configuration, type the Windows 7 ip address or name in Windoww XP Windows Explorer, such as
\\ipaddress (or
\\Windows7computername)
http://windows.microsoft.com/en-hk/windows/connect-two-computers-crossover-cable#1TC=windows-7
If the two computers can connect to the same network, then we can just refer to the following guide to share files
http://windows.microsoft.com/en-hk/windows/networking-home-computers-running-different-windows#networking-home-computers-running-different-windows=windows-7
Yolanda Zhu
TechNet Community Support

ITMS problems after upgrading to 6.0.4.2/Win

Background
I previously used iTunes 6.0.2 on my Windows XP SP2 machine, without any problems. My last transaction was the purchase of a multipass for the Daily Show; using it, I successfully downloaded the two episodes available at the time.
The next day I was prompted to upgrade to 6.0.4.2. Since Apple's products generally improve with later revisions, I proceeded. Now I'm unable to use ITMS.
Symptoms
-- ITMS takes at least 75 seconds to load; eventually, it just gives up, and shows me a partially loaded page, with all the proper text, but broken-chain icons wherever graphics are meant to be.
example 1: http://www.ravidew.net/assets/itunes1.jpg
-- when I "Check for Purchases", iTunes recognises that new episodes of the Daily Show are available for download; unfortunately, they just time out and never even begin transferring.
example 2: http://www.ravidew.net/assets/itunes2.jpg
example 3: http://www.ravidew.net/assets/itunes3.jpg
Failed Attempts
To debug, I have:
-- rebooted; no avail.
-- disabled all firewall and antivirus packages; no avail.
-- checked that other machines on the same network can access ITMS; they can.
-- checked that iTunes 6.0.4.2/Win on another machine (not on the local network), logged in under my acct, can access ITMS; it can.
-- completely removed iTunes, along with its Program Files directory, registry entries, and both Application Data subdirectories; reinstalled; no avail.
-- despaired; no avail.
This problem has persisted for 52 hours now.
Anyone else having similar issues?
Windows XP Pro

Also having the same issue (every single one of them), I charge my phone twice to 3 times a day after the update, from once every 2-3 days!!!
RIM fix ASAP !!

New video problems after replacing bad cap

We are attempting to repair our first gen IMac G5 after it started having a problem with randomly shutting down. After much online research, and everything pointing towards bad capacitors, we opened up the machine and sure enough there was a bulging cap. We did the LED tests as well (fine), and ran hardware test (which also pointed to a problem on the logic board). After ringing the local Apple tech and confirming that they would only replace the whole board, not individual capacitors, we found a repair shop locally that was willing to solder on a new cap for us.
So we've put the whole machine back together today, and again the LEDs light fine. However, now, the video is totally messed up! It starts up as far as the login screen but it'd be impossible to log in as the screen is so badly scrambled.
Now we're trying to decide what the culprit is--incorrect reassembly? Accidental damage to the video cable during disassembly/assembly? Static electricity zapped the board at some point? Replacement cap not good enough (it's got a much higher uF and voltage rating but that seems to not be critical)?
Any pointers on how to proceed? We're loathe to throw in the towel just yet!

Don't throw in the towel, take it back to your local tech and have her replace the cap with one of the proper rating.

Installation problems after downloading BB Desktop Manager

All worked perfect, until an automatic update from version 5.0. to 5.0.1. messed everything up, perhaps by the user's fault...
[1] update worked just jfine
[2] problem started when an message interfered asking for a resource ..8310.msi - file
[3] I finally decided to uninstall the BB Desktop Software altogether with an uninstaller software [YU]
[4] I downloaded 500_b028_english.exe
[5] after unpacking the software with winzip the Windows installer is interrupted
[6] The Blackberry Desktop Software Installation Wizard tells me: "the wizard was interrupted before Blackberry Desktop Software could be completely installed...Your sysyem has not been modified. To complete installation at another time, please run setup again.
[7] bad news: this process repeats and interrupts always at the same point in the same manner
[8] consequently I have NO Blackberry desktop software any more at all running ....
Please, help is URGEMTLY needed .... Thx in advance, Wolfgang

Hi and Welcome to the Forums!
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest (5.0.1 is current) and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start the organizer configuration over:
KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

A few iPhone 4S problems after replacement

Let me start by saying, my iPhone is not unlocked or modded in any way...So yesterday I received my replacement 4S. I have iCloud, and everything is synced and backed up. I also have iTunes match.
When I restored my new 4S with iCloud, for some reason, my songs were not put back on my phone. Instead, they were all in the cloud. I have over 5k songs. I had just went through the ones I wanted to keep on my old phone and which I wanted in the cloud. After which, I backed up (successfully) to the cloud. So, logically, after I restored my new 4S, everything should have went back to where it was on my old phone. So I took my old phone, and backed it up to my computer. Again, I restored from the backup on my new 4S. Same story.
Now, not only do I have to go through all my songs and redownload them from the cloud, but now almost every time I unlock my iPhone, it asks for my AppleStore Password. Oh, and none of my playlists are on my phone as of this morning (though they were when I went to bed last night).
None of this was a problem on my past phone. But all of a sudden, the switch from my one 4S to the other, just didn't go well. And I've done this for both my wife and my dad, and both worked flawlessly. But for some reason, mine is really screwy. And now I am having another ******* problem with my iPhone. It seems to all be focused around the music. Some artists are reading "Unknown" even though all the info is right on both my computer and my old iPhone.
Yet another problem I am having, is some of the songs will not play. It shows that it is playing in the top bar, the icon control shows that it is playing, but the timer bar doesn't move and there is no sound.What the **** is going on with this phone?! I'm tempted to send this new one back, keep my old one, and start this process all over again, because this is ridiculous!

Tjroksta,
You're not addressing Apple here, just other users exactly like yourself. Before you make yourself look even more foolish, consider posting on Apple's feedback site, where Apple actually listens:
http://www.apple.com/feedback/iphone.html

Random shutdown problem after replacement of new MB

i got the replacement of my MB one month ago due to the random shut down problem. the symptom before the replacement was not only random shut down but also that the MB could not be turned on once a while.
now it's been one month after i got the replacement from apple store, there is no randon shutdown at all, but when i got up this morning, i couldn't turn it on. i tried several times, but it just turned out to be dead. any suggestion about what i'm supposed to do? shall i ask for a refund or a replacement? i'm just afraid of that i would get a defect model again.

thanks for both replies.
i usually close the MB when the shutdown is completed, i know the shutdown won't be completed if i close it right after i shut it down.
and also, i got a whole new mb as a replacement from apple store rather than having it repared and just the logical board replaced. and it's really weird, since it was said the new logical board doesn't have whatsoever problem. i also read some news on tuaw or infiniteloop (i forgot which one it is), the RSS is not really caused by the faulty logical board, it was the heat sink melt by the high temperature coming from the intel processor which shortcut the circuits around it. now i'm totally desperated. it looks like unless apple drops the stupid intel chip, otherwise the RSS will never go ever.

Problems after replacing LCD screen

I fell over and cracked the screen to my ipod nano 3rd gen. (also broke my arm but that was easier to fix!). Ive just bought a new lcd screen for it and followed all the directions on how to install it. The problem im having now is it all appears to be connected right but the screen just flashes white to black and beeps. It was only recognised on my laptop as "no name" not as an ipod. Could someone please help and let me know what i have done wrong? Before replacing the screen my ipod still worked perfectly. Thanks in advance!

Thanks man. I will take a look at it later on tonight and see what happens. From my understanding some of these LCD's have the airport built-in or is it the antenna? I think mine is one of those, But it looked like the antenna just runs on the side of the casing for the LCD display which is still intact as I only removed the actual LCD screen. I'm gonna see if the connector is in fact not pushed in all the way although I never touched it.

Installation Problem after download

Hello, There:
I bought and downloaded the 3 links of Production CS6 suite into my new PC.
When I clicked setup.exe to install it, but once the green bar ran off, nothing happened.
Really frustrated Can you help?
Thank you very much in advance!
Forest
PS: PC system is new, i7-3770K 3.5GHz, win 7 64bit, HD 2T+, Memory 16G.

Help for Download & Install & Setup & Activation http://forums.adobe.com/community/download_install_setup
Next link has a "Chat Now" button near the bottom http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Problems after Replacing the Main Logic Board in E280R

Hi
I have just replaced the main logic board and FCal Disk Back plane in one of our E280Rs and now we cannot get any out put to a console (or to RSC card). So cannot get to the OK prompt or any diagonistic output. There are no errors according to the system lights although the RSC card is reporting faulty internal disks. Whether the disks or working or not we still should be be getting at least to the OK prompt.
The main logic board has the same part number as the one we replaced and we swapped the old SEEPROM chip to the new main Logic board
Any Suggestions greatfully received
Thanks
Rob

LowLuster is correct.
If Apple techs are talking about replacing the logic board, the costs of doing so is over half the cost of a newer IMac.
You maybe better off, if it is financially possible for you, to purchase a new or "newer" used or refurbished iMac.

Problem after replace HDD on Mac Mini and iCal

Hello, I have clone the Mac Mini HDD with disk utility, and boot up the server, and now the iCal Server is not working, it's shows as started, but the calendar on iCal client is empty. What can I do?
regards Christopher.

Ok, solution was: Upgrade to Lion, that was the plan anyway.

Installation problems after reformatting

So I reformatted my iMac G5, and I'm trying to install leopard on it. But whenever I boot from the disc, it brings up the language selection screen, I click english, press next on the introduction screen, accept the terms of service, and it goes to the where would you like to install leopard screen. But, nothing shows up on that screen for me to select from. Do I need to format my hard drive a certain way? I noticed that there were options like Macintosh Extended (Journaled) and other options. Does it have to be one of those specific ones?

first start disk utility from the utilities menu at the top. does your drive show up? if it does try reformatting it again. the format should be mac os extended journaled and the partition scheme should be APM. to set the partition scheme click on "options". then quit Disk Utility and proceed with the install.

Drivers installation problems after replacing Win Xp Home Ed by Win Xp pro.

Similar Messages

Maybe you are looking for