Drop down field in ALV values not getting changed

Hi All.
I have created an drop down by key in ALV and I am initialising and filling the values in drop down in Modify view.
When I am executing the application for the first time the values fill in fine in the drop down. However based on user selection the value in drop should changed. Keep in mind all the rows added in ALV should show the same values in drop down.
Now the issue is when ever user changes the value but the drop values which were set initially does not changes.
In other words if user selects supplier A the values for all rows in drop down shows as
A
B
C
But if user selects supplier B the values for all rows in drop down should changed to
X
Y
Z
unfortunatley it still shows values as A,B,C .
I have checked while debugging and values are changed based on condition but when I set them back in ALV using set_attribute_value_set it does not shows the new values.

Hello Shakthi,
The easier option would be to convert the DropDownByKey to DropDownByIndex. If you still want to proceed with DropDownByKey then you need to initialise the ALV data again. do the following
1. after changing the attribute-value_set, call the ALV interface controller method SET_DATA and pass the instance of the context node.
2. reintiliase all the ALV settings like edit mode, converting the column editor to DropDownByKey etc....
This will ensure the new attribute value set is reflected in the ALV component.
BR, Saravanan

Similar Messages

Batch Classification Values not getting changed

Hi Gurus,
I am using the following bapi ( BAPI_OBJCL_CHANGE ) to change Batch classification values Eg: Cut clarity etc.
when i pass these values thru the function module in the program it is not getting changed while when i change it through msc2n it gets changed successfully...
I have passed the following values in the parameters of the bapi :
OBJECTKEY            = v_objectkey
OBJECTTABLE        = 'MCH1'
CLASSNUM             = V_CLASSNUM
CLASSTYPE           = '023'
KEYDATE                = 30.04.2010
ALLOCVALUESCHARNEW
CHARACT = CLARITY
VALUE_CHAR = P040
VALUE_NEW   = P040.
Can some one help me solve this....
Needed urgently..
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:31 PM
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:32 PM

Hi Jacky,
I am posting the code here.. Do let me know if u have ne queries:
REPORT ZNAVBATCH.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: P_MATNR TYPE MATNR,
            P_CHARG TYPE CHARG_D,
            P_WERKS TYPE WERKS_D,
            P_LGORT TYPE LGORT_D.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
DATA: WA_BATCH TYPE BAPI1003_OBJECT_KEYS,
        WA_ALLOCCHAR TYPE BAPI1003_ALLOC_VALUES_CHAR,
        WA_ALLOCVAL TYPE BAPI1003_ALLOC_VALUES_NUM,
        INT_BATCH TYPE STANDARD TABLE OF BAPI1003_OBJECT_KEYS,
        INT_RET1 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET2 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET3 TYPE STANDARD TABLE OF BAPIRET2,
        LV_KEY TYPE BAPI1003_KEY-OBJECT,
        INT_ALLOCVAL TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_NUM,
        INT_ALLOCCHAR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CHAR,
        INT_ALLOCCURR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CURR.
WA_BATCH-KEY_FIELD = 'MATNR'.
WA_BATCH-VALUE_INT = P_MATNR.
APPEND WA_BATCH TO INT_BATCH.
WA_BATCH-KEY_FIELD = 'CHARG'.
WA_BATCH-VALUE_INT = P_CHARG.
APPEND WA_BATCH TO INT_BATCH.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
    EXPORTING
      OBJECTTABLE    = 'MCH1'
    IMPORTING
      OBJECTKEY_CONC = LV_KEY
    TABLES
      OBJECTKEYTABLE = INT_BATCH
      RETURN         = INT_RET1.
IF SY-SUBRC = 0.
   WRITE: 'SUCCESSFUL'.
    CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
      EXPORTING
        OBJECTKEY              = LV_KEY
        OBJECTTABLE            = 'MCH1'
        CLASSNUM               = 'ZTBATCHCHR'
        CLASSTYPE              = '023'
        KEYDATE                = SY-DATUM
      UNVALUATED_CHARS       = ' '
      LANGUAGE               = SY-LANGU
    IMPORTING
      STATUS                 =
      STANDARDCLASS          =
      TABLES
        ALLOCVALUESNUM         = INT_ALLOCVAL
        ALLOCVALUESCHAR        = INT_ALLOCCHAR
        ALLOCVALUESCURR        = INT_ALLOCCURR
        RETURN                 = INT_RET2
    IF SY-SUBRC = 0.
      WRITE : 'SUCCESSFUL'.
      READ TABLE INT_ALLOCCHAR INTO WA_ALLOCCHAR WITH KEY CHARACT = 'CLARITY'.
      IF SY-SUBRC = 0.
        WA_ALLOCCHAR-VALUE_CHAR = 'C02'.
        WA_ALLOCCHAR-VALUE_NEUTRAL = 'C02'.
        MODIFY INT_ALLOCCHAR FROM WA_ALLOCCHAR INDEX SY-TABIX TRANSPORTING VALUE_CHAR VALUE_NEUTRAL.
      ENDIF.
      CALL FUNCTION 'BAPI_OBJCL_CHANGE'
        EXPORTING
          OBJECTKEY                = LV_KEY
          OBJECTTABLE              = 'MCH1'
          CLASSNUM                 = 'ZTBATCHCHR'
          CLASSTYPE                = '023'
         STATUS                   = '1'
         STANDARDCLASS            =
         CHANGENUMBER             =
         KEYDATE                  = SY-DATUM
         NO_DEFAULT_VALUES        = ' '
       IMPORTING
         CLASSIF_STATUS           =
        TABLES
          ALLOCVALUESNUMNEW        = INT_ALLOCVAL
          ALLOCVALUESCHARNEW       = INT_ALLOCCHAR
          ALLOCVALUESCURRNEW       = INT_ALLOCCURR
          RETURN                   = INT_RET3
      IF SY-SUBRC = 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           WAIT          = 'X'
        IMPORTING
          RETURN        =
        IF SY-SUBRC = 0.
          WRITE: 'SUCCESSFUL'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.

Alias in drop down fields of alv grid

I'm using an ALV-Grid an have 3 Dropdown-Lists per Line. I can fill those without a problem. What i want to know is whether the method   CL_GUI_ALV_GRID->SET_DROP_DOWN_TABLE offers the alias list. Those values have a value and an alias. How do I get the 'INT_VALUE' from the drop-down-list item?
if yes then how to implement it .
helpful answers will be rewarded.

Hi,
U have to mark the field drdn_alias of the fieldcat. Like...
<b>wa_fieldcat-drdn_hndl = '1'.
wa_fieldcat-drdn_alias = 'X'.</b>
And get the int_value [internal value] from the drop down like this....
LOOP AT i_effest.
        READ TABLE i_drop_alias WITH KEY handle = '1'
                                         value = i_effest-bolt_on
                                         INTO w_drop_alias.
        IF sy-subrc EQ 0.
          bolt_on = w_drop_alias-int_value.
        ENDIF.
ENDLOOP.
-SatyaPriya

Drop-down list formattedValue returning value, not text

Hi all,
I'm having a problem with a drop-down list. I can get the information I want in Reader 9, but we only have Reader 7.0.5 distributed at the moment.
I need to pull out its text value and its specified value, but everything I try just pulls out the specified value.
In Reader 9 formattedValue gives me the text and rawValue will give me the specified value.
Anyone able to help me please?
Thanks,
Tom

Tom:
It's possible, but complicated. You need to look into the field definition where we store the listbox contents. Then you can correlate the display item from the bound item. I've done this before in another context. I've appended the script I used.
John Brinkman
http://blogs.adobe.com/formfeed
function getDisplayValue(vField)
var vBoundItems = saveItems(vField);
var vDisplayItems = dispItems(vField);
if (vBoundItems == null || vDisplayItems == null)
return vField.rawValue;
for (var i=0; i<vBoundItems.length; i++)
if (vBoundItems.item(i).value == A.rawValue)
return vDisplayItems.item(i).value;
return "";
* saveItems(vField)
* Get the list of items that are bound to the data
* @param vField -- the list field
function saveItems(vField)
for (var i=0; i<vField.nodes.length; i++)
var vChild = vField.nodes.item(i);
if (vChild.className == "items" && vChild.save == "1")
return vChild.nodes;
return null;
* dispItems(vField)
* Get the list of display items
* @param vField -- the list field
function dispItems(vField)
<items>
<text>aaa</text>
</items>
<items save="1" presence="hidden">
<text>111</text>
</items>
for (var i=0; i<vField.nodes.length; i++)
var vChild = vField.nodes.item(i);
if (vChild.className == "items" && vChild.save != "1")
return vChild.nodes;
return null;

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. How can I fix this?

I have created a PDF form with multiple drop downs, all with the same drop down values. When I select a value from 1 of the drop down fields, it replicates in all of the others - which I do not want. Can I fix this?

I'm fairly new to this, but I think it has to do with the way you have the drop downs named. Did you copy one then keep pasting it in each field? If so, that is the problem. You should rename each one with a different number: Dropdown1, Dropdown2, etc. I think that might solve the issue.

Infopath 2013 - Values are not appearing in a drop down field referencing site column which uses lookup in custom list

I have a master custom list that has a set of site columns. For each site column there is a lookup to a custom list with reference data. When I edit the list in data entry view all values in drop down fields work fine, but when I customize the form for
the master list, no data appears in the drop down fields. I can change the data binding on the form so it references the the correct data and when I preview the form it works. But when I publish it, no data is available in these drop down fields.

Hi shakonarson,
According to your description, I try to reproduce your scenario but the lookup field works fine.
When we customize the form for the list in the InfoPath 2013 , it is by design that the Drop-Down List Box control cannot display its value.
For troubleshooting your issue, please take steps as below:
Go to lookup List Box on your form in InfoPath 2013 , right click it and choose “Drop-Down List Properties” from the bottom of your field menu.
Make Sure you select “Get choices from an external data source” and correct Data source.
Make Sure the Xpath of Entries is “d:SharePointListItem_RW” under the dataFields.
Here is a good blog for sorting lookup column DropDown by customizing your list form with InfoPath you can have a look:
Sort SharePoint lookup column Dropdown by customizing your list form
with InfoPath
Hope this helps!
Best Regards,
Eric
Eric Tao
TechNet Community Support

Is there a way to get a drop down field in a muse form? (Not using a third party like jot or Wufoo)

Is there a way to get a drop down field in a muse form? (Not using a third party like jot or Wufoo) if not then it needs to be a priority for the developers (also radio buttons) as whay should we have to use third party form generators !!
Thanx

LOL..... No guru's or employees/staff can answer this simple question ?????
20+ years in the Advertising Design industry, and would think a simple answer to this would be easy ?

Acrobat X Pro Drop-down Fields Do Not Appear on Adobe Reader for iPad. Help!

Hello,
I am having a problem getting drop-down fields to appear on Adobe Reader for iPad. Basically, I need to create a form that includes drop-down fields, with the end result being a form that can be viewed and completed on an iPad, using the Adobe Reader app. Above all else, the end result needs to be viewable on an iPad.
I created a form using Acrobat X Pro within which drop-down fields work flawlessly. However, when I try to open this form on an iPad, the drop-down fields do not even appear. I have done some investigating on the Web (including these forums) and come to understand that this has to do with javascript limitations on Apple products, but have yet to discover a solution to my problem.
To summarize: does anyone know how to make drop-down fields appear in Abobe Reader for iPad app? Or, does anyone know a workaround in which I could have a drop-down menu (or something similar) in my form and have it work on Adobe Reader for iPad?
Thanks in advance for the help. I took on this project from my boss' boss, so I'd really like to get this done for him.

Hello GKaiseril,
Thanks for the reply. I experienced the issue running the most recent version of the Adobe Mobile Reader app. I'm not sure I can convince the client to use anything else, but its worth a shot.
All I need is a simple drop-down list (multiple fields in the document) with 4 options that the user can select and submit as a form. Is this something EZ Pdf reader can do? Also, is EZ Pdf Reader free? (the reason I ask is I am an Android user and do not readily have access to a iPad).
Thanks again.

NOT READY drop down field is dragging

Hi Experts
NOT READY field is not allowing to choose the value from the drop down list.
Whenever I try to select NOT READY drop down field, the complete header area of the in Interaction center is dragging/ moving to left side and it is coming to right position for second try.
Please advise how to rectify this error.
Thanks
Shaik Chand

Apply Note 1408731 - Context area repositioned when clicking Not Ready dropdown

Adobe Form... Is there a way to use a drop down menu to highlight or note other fields...

I am working on a simple Adobe form. I am currently trying to figure out if there is a way to use the answers of a drop down menu to either mark, note or highlight 14 other fields. There are 9 possibilities in the drop down menu, include a blank and NONE.
For example if the drop down menu is set to 1, then field 9, 10 and 14 are marked, noted or highlighted.
Is this possible with a script?
Thank you in advance for any help!

Have you looked at the properties that are available to form fields. I would look at setting the fill color or border color for a form field. Either of these can be done with Acrobat JavaScript.

Using JavaScript to auto populate a field based on numeric value of a separate drop down field

Hello, I am trying to set up a simple, I hope, javascript which will enable to me auto populate one field based on the numberic value of another field using Acrobat Pro XI.
Essentially I have 2 drop down fields (we'll call them DD1 and DD2).
DD1 is the sum of 8 preceding drop down values. That sum can be anywhere from 0 - 40. Whatever that sum falls within a range which identifies a rating. The ratings and ranges are below:
0-8: Non-Performer
9-16: Low Performer
17-24: Performer
25-32: High Performer
33-40: Exceptional Performer
DD2 is where the rating ("non-performer", "low performer", etc.) will be captured. Instead of requiring the user to look at DD1, determine the value, and then identify and input the rating manually, I would like DD2 to auto populate the rating based on the value (sum) in DD1.
For example, if DD1 shows a value of 27 then DD2 would auto populate "High Performer". So how do I write this code or execute this? In excel I would use an if, then statement. Is there something similar in Acrobat Pro XI.
Any help is greatly appreciated. Thank you in advance.

If you use a text field, the custom calculation script could be:
// Custom calculation script for text field
(function () {
    var s = getField("DD1").valueAsString;
    // Blank this field if input is blank
    if (!s) {
        event.value = "";
        return;
    // Convert string to number
    var v = +s;
    // Set this field's value based on the input
    if (v <= 40 && v >= 33) {
        event.value = "Exceptional Performer";
        return;
    if (v < 33 && v >= 25) {
        event.value = "High Performer";
        return;
    if (v < 25 && v >= 17) {
        event.value = "Performer";
        return;
    if (v < 17 && v >= 9) {
        event.value = "Low Performer";
        return;
    if (v < 9 && v >= 0) {
        event.value = "Non-Performer";
        return;
    // If none of the above fit, blank this field
    event.value = "";

I am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends. i have tried changing the resolution but that doesn't work. any suggestions?

i am trying to complete a form but can't get to the final drop down question as it is not displayed because it falls below where my screen ends. i have tried changing the resolution but that doesn't work. any suggestions?

brilliant
google chrome works where safari doesn't on my macbook air. many thanks
i now have an embarrassing qu. have dowloaded spider solitaire (sad!) and i can't add cards at the bottom of a column for the same reason - the display cuts short. i have tried to extend it with the arrows in the bottom corners but it makes no difference. any ideas?

I am currently using FormsCentral to distribute a form created in Acrobat. I need to add an option to one of the drop down fields but do not want to re-distribute the form due to reporting purposes. How can I do this?

I am currently using FormsCentral to distribute a form created in Acrobat. I need to add an option to one of the drop down fields but do not want to re-distribute the form due to reporting purposes. How can I do this?

You can open the form in Acrobat, select "File > Save a Copy", open the copy you just saved (it doesn't happen automatically), edit the dropdown to add the new item, save as a new file, and then Reader-enable the file by selecting: File > Save As Other > Reader Extended PDF > Enable More Tools. The resulting PDF should work with FormsCentral just like the original.

Editable ALV- Quantity field value is getting changed while double clicking

Hi all,
I have created Editable ALV grid using Class concepts. Quantity field is editable in dat. but after changing value and if im double clicking on that field, value is getting changed. eg: 45 is changing to .045. How can i resolve this problem.
Could u plz help.

Hi Anu,
One question from my side.
U have displayed the ALV.In that grid u have quantity field.U have changed the value of that field to 45.
When u press enter the value has been changed to .045.Is this u r problem.
U can do onething anu.
Declare one varaible with the local field.
Pass u r quantity field value into that variable.
While displaying thriugh SET_TABLE_FIRST_DISPLAY in your internal table pass this variable.
It will solve u r problem.I think.
Let me if yu have any problem
IF u want u can refer to the program BCALV_EDIT* in se38.
There also u have needful info
Thanks,

Drop down list in ALV grid

Dear Expert,
I am new to OOPS ,
I want to display drop down list for a particular field in my output, so I am using OOPS but in my below code
I am facing problem in displaying the output as I am getting the error message
Field catalog not found...
Also advice me how to display drop down list in a particular field.
Please advice
MODULE pbo OUTPUT.
SET PF-STATUS 'ZTEST'.
IF g_custom_container IS INITIAL.
    DATA: lt_exclude TYPE ui_functions,
          lt_f4 TYPE lvc_t_f4 WITH HEADER LINE.
    CREATE OBJECT g_custom_container
      EXPORTING
        container_name = g_container.
    CREATE OBJECT g_grid
      EXPORTING
        i_parent = g_custom_container.
    PERFORM field_catalog TABLES it_lvc_t_fcat
       USING: 'S_FINAL' 'MATNR' ' ' 'Part Number' ' ' ' ',
                   'S_FINAL' 'MAKTX' ' ' 'Part Description' ' ' ' ',
                   'S_FINAL' 'MBLNR' ' ' 'Document No' ' ' ' ',
                   'S_FINAL' 'BLDAT' ' ' 'Document date' ' ' ' ',
                   'S_FINAL' 'LIFNR' ' ' 'Vendor Number' ' ' ' ',
                   'S_FINAL' 'STATUS' ' ' 'Acknowledgement' ' ' 'X',
                   'S_FINAL' 'REMARKS' ' ' 'Remarks' ' ' 'X'.
    CALL METHOD g_grid->set_table_for_first_display
       EXPORTING
*    I_STRUCTURE_NAME              =
     is_layout                                =   it_lvc_s_layo
       CHANGING
         it_outtab                        =   i_final
     it_fieldcatalog                =   it_lvc_t_fcat
ENDIF.
ENDMODULE.                 " PBO OUTPUT
FORM field_catalog TABLES t_field_catalog STRUCTURE wt_lvc_s_fcat
USING fp_tabname TYPE any
fp_fieldname TYPE any
fp_key TYPE any
fp_text TYPE any
fp_do_sum TYPE any
fp_edit TYPE any.
t_field_catalog-tabname = fp_tabname.
t_field_catalog-fieldname = fp_fieldname.
t_field_catalog-key = fp_key.
t_field_catalog-seltext = fp_text.
t_field_catalog-do_sum = fp_do_sum .
t_field_catalog-edit = fp_edit .
ENDFORM.                    "field_catalog
Edited by: Karthik R on Mar 15, 2010 6:11 PM

Hi Karthik,
Below mentioned is a Simple code for creating dropdown lists for columns in ALV grid output
REPORT z_alv_dropdown.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container, ALV grid, Field catalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.
*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
*initialisation event
INITIALIZATION.
*Start of selection event
START-OF-SELECTION.
*Call to ALV
CALL SCREEN 600.
*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
set pf-status 'xxx'.
set titlebar 'MAIN100'.
Subroutine to display the output in alv
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
PAI module of the screen created. In case we use an interactive ALV or
*for additional functionalities we can create OK codes and
based on the user command we can do the coding.
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
    CASE ls_fcat-fieldname.
      WHEN 'SLART'.
*drdn-hndl = '1' is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
*drdn-hndl = '2' is the second list box
      WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
    ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .
*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.
ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.
*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Pink'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Yellow'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Green'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Black'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 White'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 Blue'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Colors'.
APPEND ls_dropdown TO lt_dropdown.
*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.
ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout .
gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.
ENDFORM.                    " build_layout
Hope it is helpful,
Regards,
Soundarya.

Drop down field in ALV values not getting changed

Similar Messages

Maybe you are looking for