Drop down in Dialog programming for a field on the screen

Hi Friends !
I have 2 screen fields zfield1- Indicator and zfield- answer .
The user wants a drop down for indicator as X or Blank to choose from and for answer the user wants YES or NO as the dropdown .
How do i create these dropdowns for the fields ?
Do I need to create search help or does dialog give other options to add these dropdowns.
Please advise .
Thanks!!

set zfield1 up where it's data element is using the domain YESNO.
For answer I use this routine a lot.
PERFORM get_dd07t_value USING 'ZLMCONTTYPE'
                              out_rec-ctype
                              out_rec-ctype_desc.
*&      Form get_dd07t_value
     -->P_DOMNAME text
     -->P_KEY      text
     -->P_RESULT   text
FORM get_dd07t_value USING    p_domname
                              p_key
                              p_result.
CLEAR p_result.
SELECT SINGLE ddtext INTO p_result
    FROM dd07t
    WHERE domname = p_domname
      AND ddlanguage = sy-langu
      AND domvalue_l = p_key.
IF sy-subrc NE 0.
    p_result = 'None'.
ELSE.
    p_result = dom_rec-ddtext.
ENDIF.
ENDFORM.                    " get_dd07t_value

Similar Messages

Drop down list of values for a field in ALV rpt within a BADI

Hi,
I need help on this issue.
TCODE LI21 is used to clear the differences in IM. The business now wants to prompt for a reason code before they can post a new material document for this clearing. I have create an implementation in BADI LE_WM_INV_WM_IM, which display the field for user to enter the reason code. However, I am trying to get a dropdown list which contain the possible values for reason code so the user can choose from this list. There are sample codes to do this but I can't apply to the codes in the implementation because call screen is not allowed. Has anyone done this before or can advise me of the solution?
Thanks.

Hi,
Use the Field Catalogue Properties
Ref_fieldname
Ref_Tablename
and assign the corresponding field & Table/Strucutre Name to the above fields....

Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

Basically you would need Acrobat. However, it is now also possible to create basic form fields using just the free Reader. In fact, I've been working on a tool that allows you to do it, so if you're interested in it please contact me privately.

Drop Down Menu selection query for recordset.

I am looking to utilize a dynamic drop down menu to query a recordset...I am using Colfusion to import an MS Access database that contains the following fields: "Model Date", "Name", "Points" and "Target". Each time the database updates, the "Model Date" field contains the date and time the model was run. I have figured out how to create a dynamic drop down using SELECT DISTINCT "model date" and have also figured out how to create the dynamic recordset to be displayed showing the "Name", "Points" and "Target" data.
I want the user to select the "Model Date" from the drop down, hit a submit button and then have the appropriate "Name", "Points" and "Target" data queried and shown below.
The query should take the selection from the "model date" dropdown and then query the "name", "points" and "target" fields for that particular "model date"
I admit my knowledge of SQL and Coldfusion is not the best, but it seems like this is a somewhat simple task and I am just missing one or two pieces of the cog to put it all together.
The database basically looks like this:
Model Date...........Name..........Points........Target
8/1/2010 08:00......John Doe.....1,250.........5.55%
8/1/2010 08:00......Jane Doe.....850............2.35%
8/1/2010 08:00......Bill Smith....11,832........-123.23%
8/2/2010 09:02......John Doe.....1,323.........6.67%
8/2/2010 09:02......Jane Doe.....1,001.........3.21%
8/2/2010 09:02......Bill Smith....10,235........-110.26%
The dropdown will only show the "model dates"
8/1/2010 08:00
8/2/2010 09:02
For example, if 8/1/2010 08:00 was selected from the dropdown, I want the following displayed:
Name..................Points...................Target
John Doe.............1,250....................5.55%
Jane Doe.............850.......................2.35%
Bill Smith............11,832...................-123.23%
Any help or suggestions would be greatly appreciated!!!
Thanks,
Mike

My second paragraph talks about just displaying the filtered data, so I'm assuming that's what you're looking for, but still not quite sure based on what the other responses are.
But I head on anyway -
On your first page, make note of the instance name of your drop down menu, such as "ModelDate". Make sure it's in a Form and set the form action to the page where you want to display your data, set the form action to POST.
On the results page, create a table with cells for each of the data elements you want to display. Create a recordset which you can do in Simple mode. Leave it at select all, and set the filter drop down to the database field which contains your Model Date. In the box to the right, select "=". the next dropdown selct "Form Variable" and the variable name type in the instance name of the drop down on the first page.
I may not have the terminology right, doing it from memory.
From the data bindings tab, expand your recordset and locate each of the database fields you want to display. Drag each one to the table cell on the page where you want it displayed. The table cells have to be in a linear row.
Now, select the table row buy selecting the TR tag in the tags just above the properties panel. In the server behaviors tab, select repeat region and "All Records"
Publish your pages and test!

Created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows

You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com

The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

Short answer:
Click Hide Song(s), it is what you wanted to do...
Long answer:
iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
tt2

Recently changed my password for mail, can still read my mail, but the drop down keeps appearing, asking for my password and saying it's incorrect. Totally confused.

I Recently changed the password for mail, on iMac. I can still read my mail, but the drop down keeps appearing, asking for my password, then telling me it's incorrect. Totally confused.

If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
Step 1
When prompted for the password, check the box marked Remember this password in my keychain.
Step 2
Check that the keychain is working.
Step 3
Check that the default keychain is unlocked.

Search help for input fields in a screen

Hi,
Pls help me
how to set search help property for the I/O fields in screen in se80?
1. do we want to add any property for search help in the property window?
2.do we want to create a MODULE PROCESS ON VALUE REQUEST ?
PLS tell me how to set search for the I/O field in se80?pls tell me the process?
i want to set the search help for more I/O fields in se80 but all the fields belongs to the same table?
can i create a single search for all these fields and use that for all the I/O fields ?
elementary search help or collective search help?
thanks & regards in advance,
vsnl.

Hi,
Input Help on the Screen
Within the Screen Painter, you can define two types of input help:
1. The FIELD statement with one of the additions VALUES or SELECT.
2. Linking a search help directly to a screen field.
If you link a search help directly to a screen field, it overrides the additions of the FIELD
statement. However, the input check [Page 581] functions of the FIELD statement remain
unaffected.
Input Help in Flow Logic
The following input help methods are obsolete and should not be used. They are still supported
for compatibility reasons.
In the screen flow logic, you can specify a value list for a screen field <f> as follows:
FIELD <f> VALUES (<val1>, <val2>,...).
The value list contains a series of single values <vali>. The NOT and BETWEEN additions for the
input check [Page 581] are not appropriate for input help.
You can also create a value list by accessing a database table as follows:
FIELD <f> SELECT *
FROM <dbtab>
WHERE <k1> = <f1> AND <k2> = <f2> AND...
In the WHERE condition, the fields of the primary key <ki> of the database table <dbtab> are
checked against the screen fields <fi>. The WHENEVER addition, used with input checks [Page
581], is not necessary for input help.
If you have used a ABAP Dictionary reference for field <f>, the selection and the hit list formatting
may be affected by any check table attached to the field.
Attaching a Search Help
Search helps from the ABAP Dictionary can be attached to a screen field [Ext.]. To do this, enter
the name of the search help in the corresponding field in the attributes of the screen field in the
Screen Painter. This assigns the first parameter of the search help to the screen field. It is only
possible to place a value from the hit list onto the screen.
Input help on a screen.
REPORT DEMO_DYNPRO_F4_HELP_DYNPRO MESSAGE-ID AT.
DATA: CARRIER(3) TYPE C,
CONNECTION(4) TYPE C.
CALL SCREEN 100.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
602 April 2001
Cancel
Airline
Flight number
Screen field with search help
Input help in the flow logic
The input fields have been adopted from the program fields CARRIER and
CONNECTION. The function code of the pushbutton is CANCEL, with function type
E. The search help DEMO_F4_DE with the search help parameter CARRID is
assigned to the screen field CARRIER. The search help uses the database table
SCARR.
The screen flow logic is as follows:
PROCESS BEFORE OUTPUT.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
FIELD CARRIER VALUES ('AA', 'LH').
FIELD CONNECTION SELECT *
FROM SPFLI
WHERE CARRID = CARRIER
AND CONNID = CONNECTION.
When the user chooses the input help for the individual fields, the following input
help is displayed:
For the Airline field, the search help displays the names of the airlines and places the airline
code in the input field for the chosen line. If the airline code is not one of those listed in the
VALUES list of the screen flow logic, the input check triggers an error message in the PAI
event. So the search help overrides the VALUES addition for the input help, but not for the
input checks. This is therefore not an appropriate place to use the VALUE addition.
For the Flight number field, the flow logic displays the selected entries from the database
table SPFLI and places the selected line in the input field.
Regards,
Bhaskar

HT1719 I am trying to sync my ipod shuffle to the itunes on my computer. When I try to sync I go to the drop down file tab. PULL up "devices" But the extended options of SYNC, RESTORE, Transfer and Backup won't allow me to click on them. How do I activ

I am trying to sync my ipod shuffle to the itunes on my computer. When I try to sync I go to the drop down file tab. PULL up "devices" But the extended options of SYNC, RESTORE, Transfer and Backup won't allow me to click on them. How do I activate?

Those menu bar commands are disabled when you do not have a device (your shuffle) selected in iTunes.
If the iTunes sidebar (along left side of iTunes) is hidden, from the menu bar, under View, select Show Sidebar. In the sidebar, your shuffle should be listed under DEVICES. Click on it there to select it. Now, those commands under the File menu should be accessible.
However, once you have the shuffle selected, many of those "device-related" commands in the menu bar are also on the iTunes window. For example, there is a Sync button at the low-right corner of the window, which does the same thing as the command in the menu bar.

Selection screen control for a field in the report painter report

Hi,
Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
Your prompt reply will be really appreciated.
Thanks,
Ramesh.

look at this code and try
select-options : S_NODEID for ZNODETAB-ZNODEID.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-LOW'.
at selection-screen on value-request for s_nodeid-low
perform f4_nodeid using 'S_NODEID-HIGH'.
end-of-selection.
FORM f4_nodeid USING    p_field.
declare it_node.
select znodeid from ZNODETAB into table it_node.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ZNODEID'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      dynprofield     = p_field
      value           = space
      value_org       = 'S'
      display         = 'F'
    TABLES
      value_tab       = it_node
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
endform

Invalid date format for 'Created' field in the getVersions web service Response.

Hi all,
I am trying to get all versions for selected document by calling getVersions method Versions.asmxweb service, but getting ‘Created’ date attribute value is in the format "29-05-2012 12:01"
but I am expecting either one of the following date formats.
1.      yyyy-MM-dd HH:mm:ss or yyyy-MM-ddTHH:mm:ssz
2.      MM/dd/yyyy HH:mm a   (a means AM/PM)
3.      MM/dd/yyyy
4.      yyyyMMdd HH:mm:ss
where do I need to change?
what are all the formate will be support by SharePoint?
please find attached response xml of getVersions call.
<results xmlns="http://schemas.microsoft.com/sharepoint/soap/">
    <list id="{6A6F6CD1-2E9C-44CC-B1F5-56G7JB5C8778}"/>
    <versioning enabled="1"/>
    <settings url="http://hbngjfgj47s20/reg/_layouts/LstSetng.aspx?List={7S6F6CD1-2E9C-44CC-B1F5-KO9J8Y7Y6H78}"/>
    <result version="@0.3" url="http://vmesxsrv47s20/register/Shared Documents/Parent/child/my_doc" created="29-05-2012 12:01" createdRaw="2014-12-02T12:46:02Z" createdBy="my_dom\agi_sharepoint"
createdByName="AGI_Sharepoint" size="288" comments=""/>
    <result version="0.1" url="http://hbngjfgj47s20/register/_vti_history/1/Shared Documents/Parent/child/my_doc" created="29-05-2012 10:01" createdRaw="2014-12-02T10:55:18Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
    <result version="0.2" url="http://hbngjfgj47s20/register/_vti_history/2/Shared Documents/Parent/child/my_doc.txt" created="29-05-2012 11:01" createdRaw="2014-12-02T10:59:25Z" createdBy="my_dom\my_sharepoint"
createdByName="my_sharepoint" size="288" comments=""/>
</results>
Kindly help me on this.

Hi,
According to your post, my understanding is that you want to change date format for ‘Created’ field in the getVersions web service.
Per my knowledge, you can get the date format for ‘Created’ field as “MM/dd/yyyy HH:mm a”.
For more information, you can refer to:
Versions.GetVersions Method (Versions)
Best Regards,
Linda Li
Linda Li
TechNet Community Support

In dialog programming i want to leave the current transaction

Hi,
In dialog programming i want to leave the current transaction and come out to the standard sap initial screen.
Please advise me how can i apply.
Thanks.

Basic question, please search before posting.
Thread locked.
Thomas

OVS for two fields in the same selct Option?

Hi Experts,
I am using select options in my view. I am using OVS for one field. I would like to use same OVS for another field in the same select option.
I tried "case ovs_callback_object->context_attribute". Which return the field for which we press F4.
But IT did not work here probably because this we can use only for context attributes fields.
but But here I dont get the select option field.
But in my case I have select options which are not mapped to any context attribute.
How can I find , for which field in select options F4 help has been requested?
Regards,
Vishal.

Hi,
You can find which field in select options F4 help has been requested using I_OVS_DATA-M_SELECTION_FIELD_ID.
        CASE I_OVS_DATA-M_SELECTION_FIELD_ID .
             WHEN 'PERNR'.
             WHEN 'ENAME'.
             WHEN OTHERS.
        ENDCASE.
If you are using one OVS for more than one fileds, please remember that you need to provide different code for each fields at phase 0 (configuration) and phase 3 (apply result).
Regards,

I need program for iMac to read the arabic subtitle of movies

what is the best subtitle program for imac to read the arabic subtitle for movies ?

Hello, Are you using DVD Player, or what?
Is Arabic enabled in Languages?

How can i post the fields in the screen by selecting a record

Hi,
I have a problem in dialog programming.
I need to populate the fields in the screen by selecting a single record.
For example,
    Screen consists of 'CARRID, CONNID,FLDATE... fields.
    By pressing F4 in CARRID field it will display the contents from database table and display the records. If i select the record LH 0400 ... record then automatically the connid field should fill with the contents of the record i.e., 0400 and similarly the remaining fields.
   How can i do this in dialog programming?
   I tried with F4IF_INT_table_.. function module. There is a table parameter DYNmapping. But dont know how to use it? Can any body explain me how to use it?
   Thanks in advance..
   Suvan

Hi Vinod,
Thanks for your reply. I solved my problem. It is working with the table parameter 'DYNPFLD_MAPPING' in the function module 'F4IF_INT_TABLE_VALUE_REQUEST'.
With your logic we can't decide which record is selected. Because there can be multiple records for a single CARRID.
My question is how to post the entire record into the screen fields at a time? It is possible with the parameter I specified inthe above said function module.
With dictionary reference it will fetch the entire entries from the Check table.
Thanks again for your co-operation.
Suvan.<b></b>

Drop down in Dialog programming for a field on the screen

Similar Messages

Maybe you are looking for