Drop Ship workflow Process Name

Hello,
Does anyone know the seeded Process Name that could be used for drop ship orders. According to the documentation I've read about drop ship, they explained to use the Generic Order Flow which I did. The problem is with the line level process name. I've tried Line Flow Generic and several other process names but my orders get stuck at the booking level. Other types work just fine. I've also changed the source type to external but nothing works!
I'm using Vision 11.5.7
My setup is as follows:
Item = transactable, stockable, customer ordered, customer orders enabled, shippable, oe transactable
transaction type: Drop ship, order category= order, order workflow = order flow- generic, Assign line flows-->Process name= Line flow- generic
Line type --> source type= external
Set up defaulting rules as well
Orders get stuck at booking! Should be awaiting receipt
Your help will be appreciated
Cheers
Riad

Hi Sandeep,
Are you sure whether the Workflow Background Process has picked the order line and workflow activity is not errored out? Please check the workflow, has it completed Purchase Release activity or is it still in the Purchase Release - Deferred state?
If the workflow is in the Purchase Release - Deferred state, then the line will be in the Booked status. So, run the WBP program (item key - OM Order Line, Process Stuck - Y, Process Timeout - N) & see the line workflow activity & the line status should be progressed to Awaiting Reciept.
Also, make sure you have provided the List Price (greater than zero) & Default Buyer in the Purchasing tab at the Item master level for the dropship item. If these information are not provided then the Requisition will not be created.
Regards,
Hemanth

Similar Messages

  • Workflow Process Name for Single/Bulk enrollment

    Hi,
    What is the Workflow Process Name for Single/Bulk enrollment through Learning Administrator ?

    Hi,
    In this process, how to enable approval flag for Learner Administrator ?
    or in other words ...
    Does approval can be set when Learner Admin enroll any employee/learner in the class ?

  • Looking for screen to change Supplier User Registr.. workflow process name

    Hi,
    The question relates to Supplier User Management.
    Does anybody know if there is a page where you can pickup the workflow (the shipped one has internal name POS_REG) process name for supplier registration?
    Thank you.
    Anatoliy

    Hi Bala
    What enhancements were you adding to the Workflow Reassign/Delegate feature, which included being able to add comments? A good idea is to look for any differences between how workflow implements the reassign feature, and your customization.
    Also, make sure you only use the Public documented PL/SQL APIs and do not update the tables directly to ensure no Support or Upgrade Issues.
    Cheers
    Mark
    I am using Stand alone Workflow 2.6, In my workflow process
    which is an Issue tracking system which is working fine. On Enhancement I would like to create my own RE-ASSIGN function which will, Change the ownership of an issue totally to other user.
    For this I Created a package(CHANGE_OWNER.CREATE)which will show list of Users and Comment field(Just like Re-Assign).
    Here user can pick other user, and add comment,
    once submit for that Item key I am updating the workflow notification table so that paritcular issue ownership will be changed.
    In my workflow process I created a lookup code called "Change Owner". On click of Change Owner it will call the Function
    in workflow process which will call CHANGE_OWNER.CREATE, here
    the workflow process supposed to wait and get the User to be
    changed. BUT THE PROCESS IS NOT WAITING, IT JUST DISPLAYED THE
    SCREEN AND CONTINUED THE WORKFLOW PROCESS. I WANT THE MY
    WORKFLOW PROCESS TO BE ACT AS RE-ASSINGN BUTTON WHICH WILL WAIT
    FOR THE USER INPUT.
    HOW TO DO IT.
    Thanks
    Bala.

  • Show specific workflow process name started by batch through command line?

    I have created a batch to start up a workflow process
    "start task for component WfProcMgr with ProcessName=\"xx Import Promotion Rule\", RowId = $1"
    may I know if I can have any means to know the status of task and showing which processes I kicked (i.e. xx Import Promotion Rule)?
    Many appreciations if anyone can help.

    Have you listed the tasks?
    There will be one for WfProcMgr and most likely complete or in error.
    Just list all WfProcMgr to filter the others and you should get what you are looking for...
    Not really sure what you are trying to do precisely so I hope this helps

  • Workflow Process - Leave of Absence in R12

    Hey guys,
    I am trying to find out the workflow process name for the Leave of Absence process using the FND FUNCTION Name.
    Previously in 11i you were able to find out the process name (pProcessName=HR_LOA_JSP_PRC) using the parameters field in the function definition screen.
    pProcessName=HR_LOA_JSP_PRC&pItemType=HRSSA&pCalledFrom=HR_LOA_SS&pPersonID=&pFromMenu=Y
    But the parameters field in 12i has a reference to a Generic process name.
    Any Idea how to find the process name? I had heard that the architecture had changed? so anyone has any idea or doc or metalink note on this?
    new 12i function
    OAFunc=HR_LOA_SS&pAMETranType=SSHRMS&pAMEAppId=800&pProcessName=HR_GENERIC_APPROVAL_PRC&pItemType=HRSSA&pCalledFrom=HR_LOA_SS&pApprovalReqd=YD&pNtfSubMsg=HR_ABS_NTF_SUB_MSG&pConcAction=N
    ---------------------------------------------

    There seems to some kind of change of concept with respect to some of the workflows.
    Found the below text from the workflow developer guide.
    Self Service Generic Approval Process (HR_GENERIC_APPROVAL_PRC) - This approval process supplied by Oracle Self-Service Human Resources is used across HRMS products such as Oracle iRecruitment, Oracle Training administration, Oracle Talent Management (Appraisal), and others, as well as by Oracle Self-Service Human Resource. The Self Service Generic Approval Process provides extensive capability including the features delivered through the Notification Process for Approvers and Notifiers. This generic approval process can be invoked directly from BC4J Java code by passing mandatory attributes for AME callback. Also it provides callbacks for dynamic notification message subject generation with product specific-callbacks.
    ----------------------------------

  • Manual Orders and Automated Workflows/drop shipping notifications

    We have a customer that also sells on Amazon.com and eBay.  The issue we're having issue when they enter a manual order, there is not an automated workflow that is sent to the dropshipper to process the order for order fulfillment.  We need to know if there is a way when a manual order is entered, it will kick off the workflow to the dropshipper to make them aware of the order. Is there any way for Catalyst to integrate with eBay or Amazon customer purchases to be entered manually and kick off a workflow notification to the supplier who drop ships.

    Hi Mark,
    I can not see how this can be done, but to manually send the drop shipping email. I had a look at the 3rd party workflows as a possible solution but it doesn't look like it can be done that way. You may have to come up with an API solution for this requirement.
    -mario

  • Intrastat report in drop-ship process

    Hi,
    I have drop-ship scenario where plant country belongs to France ( FR) but actual shipment happens from Taiwan(TW).
    Butin the sale order we use plant as France(FR) and shipping point as Taiwan(TW).Since these are drop ships dispatched from non EU countries i.e in my case Taiwan(TW), the intrastat report ignores it. i.e on the invoice document in the "Trade/Custom" tab both "Country of origin" and "Dispatch country" will show as France and the same is picked in Intrastat reporting.
    But this is wrong since actual shipment has been done from Taiwan country . Therefore how can we change this to Taiwan i.e correct country.  One way is change in the user exit of billing.
    but is there any other way, i mean process wise ?. If we do third order sales process would this resolve problem. if so how can this be achieved.
    What i have noticed is even in third party sales process it has the same problem.
    Thankyou in advance

    Thankyou for your reply.
    even if i use Foreign Trade concept , but my plant in sales order is "France" and shipping point as "Taiwan", then the problem is instrastat will ignore Taiwan as a departure country  , it shows only France as departure country , but it should be Taiwan. Therefore how can we resove this problem.
    I dont want to change dispatch country as "Taiwan" using user-exit  in invoice-> "customs/Trade" tab , because if i change this field then instrastat report will pick-up . But withoug user-exit how can we change via config or process wise.
    Thanks in advance

  • Cost Carrying Over in Drop Ship Processing

    Hello Experts...
    When doing a drop ship sales order, this is the following situation.  Item A has cost at Warehouse 01 (stock warehouse) of $400 and cost at Warehouse 03 (drop ship warehouse) of $425. 
    When doing a drop ship sales order, the correct cost of $400 from WH 1 is displayed initially until the WH is changed to WH 3, then it displays WH3 cost of $425.  However, when the Purchase Order Confirmation Screen is displayed, the cost reverts back to $400.  We have done a test 15 times in the Demo SAP B1 and even more information is not passed on using the "Copy To" function (for example, the Delivery does not pick up any costs - it is blank when processing a drop ship).
    Of course it could be changed at the Purchase Order Confirmation Screen, BUT a real simple statement comes up of why does a Sales Person have to change it when the cost is in the system and is displaying correctly on the Sales Order.  From a common sense perspective of financial matters and productivity, it takes the statement even further - why even put a cost on the Drop Ship Warehouse when the system does not pick it up.  It gets even worse when the Gross Profit comes out to being 100%.  The whole drop ship process seems to be a mystery in the SAP Documentation.
    QUESTION: Is there some setting that needs to be changed so that the correct drop ship cost is carried throughout the system automatically and all of this wasted time is cut out?
    The user guide published on Februrary 2009 covering this topic does not say anything about COMPLETE drop ship processing and cuts off at the display of the Purchase Order Confirmation Screen on page 6.
    Thanks - Zal

    Hello Julie - thanks for your reply...version is 2007 SP01 PL05...
    Maybe the problem with the cost being carried over with "Copy To" was corrected in PL07?  Will go to the release notes...
    This is getting to be a comedy - again, I am using and testing this function on SAP's provided "vanilla" Demo database with no changes, so if SAP cannot set up drop ship functioning properly on their own Demo, who can???
    OK - yes, the cost of the product is pulled from the associated vendor which is problem number one - for companies that sell both inventoried and drop ship items on a regular basis, the cost of that product is never the same.  For vendors, onsies and twosies being shipped to our customers incurs a higher expense than a shipment to one site of 100 or 200 items and they will quote a different cost to cover those expenses.  It just makes common sense that the vendor's incurred expenses to fill the drop ship versus shipment to our waregouse is going to be different, doesn't it?  Therefore the actual cost and dollars paid for the product will be different from WH01 over WH03 (or any other area - Base Price versus Discount Purchase Price), and the gross profit is going to be different between the two versions of a sales process.  Creating a thousand different price lists certainly is not the answer!
    And this begs a very simple question then - why even put in an item cost on the Item Inventory Tab for the drop ship warehouse AND why does the system pull the WH 03 dollar amount into the Sales Quotation/Order Gross Profit Base Price field but not transfer it to the Purchase Order?  Why create a constant flood of erroneous Gross Profit information on drop ship AR invoices unless you are happy to have wasted productivity?
    I think the real problem is that this is obviously a very bad design for an SAP B1 function and folks are doing all of these workarounds and extra steps (at least in PL05 so far) to get their work done.  I think it is hilarious that when trying to enter a ticket directly to SAP on this, I got the reply that "that is the way the system is designed" (albeit bad design and no effort to direct me to documentation) and had to post my question here according to new SAP B1 support standards.
    I am going to close this question as there really is not an answer except "way the system is designed" and this thread is leading nowhere.
    Many thanks to everyone who took the time to reply - lol - of course, thanks with points!!!
    Take care all - Zal

  • 3rd Party Drop Ship Process

    Hello Friends
    I was told to create a third party drop ship process and its going to be only one product for now , please help me to show steps to create this.
    Thank's

    Hi Balaji
    I create the 3rd party process steps , and i also saw the configuration in the system already done in the past , so i created the sales order but i want item category to be automatically on the sales order , but i am not sure about this. so i tried changing manually and this was the error ...item category ZTAS is not defined for this item.please advise how to fix this
    Regards

  • How do find Process name and Node name in a workflow ?

    Hi,
    For logging exceptions, how do I elegantly find the
    process name and node name in a workflow.
    Thanks
    -Anil

    The service location of the process is available on the interface returned
    by
    context.getService() in the process. That contains the full process path
    (including process project name).
    On the node, I don't know...
    Robert
    "Anil Varma" <[email protected]> wrote in message
    news:31361182.1091122588490.JavaMail.root@jserv5...
    Hi,
    For logging exceptions, how do I elegantly find the
    process name and node name in a workflow.
    Thanks
    -Anil

  • Drop Ship processing for Sales BOM

    Hi,
    We have a requirement to have a Sales BOM drop shipped from a Vendor. Only the header material is relevant for pricing and purchase order. However, we have a business requirement to explode the sales BOM in the sales document and billing document to address statistical pricing requirements at the component level.
    Since only the header material is required in the PO, it has a billing relevance of 'F'. However, we have set the components to be relevant for order related billing. Standard SAP opens up the components for billing even though a vendor invoice for the header has not been received.
    Can copy control be used to control the components from being billed unless the header is billed AND the quantity of component materials modified based on the header material being invoiced ? Is it possible to only explode the sales BOM in the billing document using a billing document exit ?
    Would appreciate suggestions from the forum.
    Regards

    Hi
    The billing document creation can be controlled through the copying requirement in Copy Control of Billing documents.
    Transaction VOFM | Billing documents: Create a new requirement which prevents billing unless the parent item has the vendor invoice receipt.
    This requirement has to be then assigned to the respective billing and sales document type in copy control.
    Regards,
    Vinu

  • Drop ship process

    Hi All
    Can any one explain what is drop ship in Sales and Distribution, used mostly in US.
    venkat c

    Hi,
    Probably you are referring to the review of Open sales orders for drop ship scenario and close them out if they are long pending. There is no point in supplying materials for an order received few months back, because even the customer may not want it anymore.
    There is nothing specific in SAP for this activity that you have mentioned.
    Will this help?
    Thanks,
    Siva

  • How to migrate Drop Ship PO and SO from 11.0.3 instance to R12?

    Hi Everyone,
    We are in process of migrating Drop Ship Orders from 11.0.3 system to R12 system?
    Can anyone help me in identifying how to migrate Drop Ship Orders?
    Is it possible to migrate Drop Ship PO and SO Separately and then link them through Drop ship sources table? How the reservation will work for this type of orders?
    Any guidelines will be really helpful.

    Hi,
    What I am currently planning to do is as follows:
    1) Migrate the Drop Ship SO
    2) Run the workflow background process which will progress the line (From Booked -> Awaiting Receipt) and insert the record in to Requisitions Interface and OE_DROP_SHIP_SOURCES Table
    3) Migrate the PO separately
    4) Update the record created through second step in Drop Ship Sources table with PO Header ID, Line ID and Line Location ID
    5) Receive against the PO
    6) OM Line is getting shipped at this stage once the receiving is done
    7) Delete the lines in Requisition interface table
    In this, the only custom thing we are doing is updating the DROP SHIP SOURCES Table with PO IDs.
    I am not able to think any other way to migrate Drop Ship SO.
    Please suggest, if anyone is foreseeing any problem in this approach or having any other approach.

  • Drop ship purchase order creation using Pl/Sql code..

    Hi,
    We are creating the purchase order for drop ship orders.
    1. Created order with line source as external and then we ran the workflow backround processor which created a requisition for the order, using this requisition we are trying to create a purchase order with autocreate functionality by using PO_INTERFACE_S. Is this the way to create a drop ship po from backend.
    Can you please suggest any other way.
    Thanks in Advance.
    jagdish.

    Hi,
    You can customize the workflow such that it creates PO automatically, by selecting the attributes "Is PO Auto Creation Allowed?" to create PO after the requisition is created.
    Requisition Import will call PO Create Documents w/f to create PO.
    Plz get back to me if any clarification is needed.

  • Sales Order Number in case of drop ship  in Standard PO Print report

    I want to print sales order number in case of drop ship in Standard PO Print report..But I am not getting any tag related to that..
    When I am checking the log file it is present in the log file but not in the Tags..Please help how can I get sales order number in case of drop ship..
    Here is the log file:
    Start of log messages from FND_FILE
    Entering Get_Order_Line_Info 2
    Entering Get_Drop_Ship_Line_ids...1
    no open order line
    line found now 18757558
    Exiting Get_Drop_Ship_Line_ids...1
    line_id 18757558om org 1274
    po org 1274
    from oe_order_lines
    got ship to ct name and location: GRUPO DE COMUNICACIÓN PROMECAL, S.L-1175623
    sales order info: 1.1-1-1-Closed-10000178
    ENTERING OE_SYS_PARAMETERS.VALUE
    Going to get the value for MASTER_ORGANIZATION_ID
    ENTERING OE_SYS_PARAMETERS_PVT.VALUE
    org_id has changed so delete the cache and reset the globals
    PARAMETER VALUE from the DB when org_id has changed : 1275
    ENTER GET_ITEM_INFO PROCEDURE
    ITEM_IDENTIFIER_TYPE : INT
    INVENTORY_ITEM_ID : 1695026
    ORDERED_ITEM_ID :
    ORDERED_ITEM : 40 x Battery 12HX330
    SOLD_TO_ORG_ID : 1684899
    EXIT GET_ITEM_INFO PROCEDURE
    got ct product and ship method: ES_40 x Battery 12HX330-
    Leaving Get_Order_Line_Info
    I am getting the sales order number 10000178 in sales order info: 1.1-1-1-Closed-10000178
    but how to get it in the report...

    Dear Nitishj,
    If the strategy is MTS then in my understanding you cannot get any sales order order number with reference to
    production made
    Reason is in MTS production will be made collectively without reference to sales order
    where as in MTO it does with reference to sales order
    Regards
    Madhu

Maybe you are looking for