Dropdown box not showing up for field w/attached search help

Hi.  I've created a search help for a data element and I know that the search help is working on the selection screen. 
The search help values come up if I hit F4 but when I click into the field on the selection screen no drop-down box appears to the right of it (so the users don't know that a search help is even available).
Has anyone seen this before?

Hi Rich,
I tried closing all sessions and re-logging in.  That did not work.
I also tried regenerating the program.  That did not work.  Very odd.
F4 works on the field, just no dropdown box! 
We're running 640.

Similar Messages

  • Hi how to attach search help to a field

    hi all,
    how to attach search help to a field.

    hi
    <b>Attaching a search help to a field</b>
    A search help can influence the behavior of a field when the input help is called. The search help must be assigned to the field in order to do this. You have the following options for this assignment:
    Attach search help to a data element / table or structure field / screen field / check table.
    Conventionally search helps are attached to table fields or data elements. We shall see the same.
    <b>Attaching a search help to a table field</b>
    Choose the field name, click on search help tab and
    provide the name of the search help.
    A search help is attached to a field of a table or structure in the maintenance transaction for this table/structure, analogously to attaching to a table. You must assign the interface parameters of the search help to any fields of the table/structure. The search field must be assigned to an EXPORT parameter of the search help at this time.
    Attach the search help to the table field
    The search help ZSTRAVELAG_NAME is therefore directly attached to the field AGENCYNUM of table ZSTRAVELAG.
    <b>Attaching a search help to a data element</b>
    Provide the search help name and the parameter name
    under the further characteristics tab of the data element.
    If the input help of a field is defined by its data element, no further screen fields can be used in the input help.
    Also note that the input F4 help would be available wherever the data element is used.
    <b>Attaching a search help to a screen element</b>
    A search help can be directly assigned to a screen field in two ways.
    The name of the search help must be entered in the Screen Painter in the Attributes for the field in the field Search help.
    The name of the search help can be defined for selection screens in ABAP reports in the PARAMETERS or SELECT-OPTIONS statement directly following the supplement MATCHCODE OBJECT.
    However, input help is only available for this particular screen.
    In this case, the search help is only available for this screen.
    <b>IF YOU WANT TO ATTCH A SERACH HELP TO THE SCREEN FILED THIS IS THE CODE</b>
    TYPES : BEGIN OF ST_OBJID_SH,
    OTYPE TYPE HRP1000-OTYPE,
    OBJID TYPE HRP1000-OBJID,
    END OF ST_OBJID_SH.
    DATA : IT_OBJID_SH TYPE STANDARD TABLE OF ST_OBJID_SH.
    DATA : WA_OBJID_SH TYPE ST_OBJID_SH.
    ************SELECTION SCREEN DESIGN************************
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    *SELECT-OPTIONS : S_OTYPE FOR HRP1001-OTYPE NO INTERVALS .
    SELECT-OPTIONS : S_OBJID FOR HRP1001-OBJID NO INTERVALS .
    SELECT-OPTIONS : DATE FOR SY-DATUM NO-EXTENSION OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK B1.
    ***********END OF SELECTION SCREEN DESIGN******************
    **********VALIDATION FOR SCREEN FIELDS*********************
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_OBJID-LOW.
    * IF S_OBJID IS NOT INITIAL.
    SELECT OTYPE OBJID FROM HRP1000
    INTO TABLE IT_OBJID_SH
    WHERE OTYPE = 'D'.
    IF SY-SUBRC EQ 0.
    * SEARCH HELP FOR QUALIFICATION.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    * DDIC_STRUCTURE = ' '
    RETFIELD = 'OBJID'
    * PVALKEY = ' '
    DYNPPROG = SY-REPID
    DYNPNR = SY-DYNNR
    DYNPROFIELD = 'S_OBJID'
    * STEPL = 0
    * WINDOW_TITLE =
    * VALUE = ' '
    VALUE_ORG = 'S'
    * MULTIPLE_CHOICE = ' '
    * DISPLAY = ' '
    * CALLBACK_PROGRAM = ' '
    * CALLBACK_FORM = ' '
    * MARK_TAB =
    * IMPORTING
    * USER_RESET =
    TABLES
    VALUE_TAB = IT_OBJID_SH
    * FIELD_TAB =
    * RETURN_TAB = RETURN_TAB
    * DYNPFLD_MAPPING =
    * EXCEPTIONS
    * PARAMETER_ERROR = 1
    * NO_VALUES_FOUND = 2
    * OTHERS = 3
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    ENDIF.
    <b>REWARD IF USEFULL</b>

  • ABAP query output not showing all output fields

    I added a new field group in an existing query and marked them to display in the output list. When I test the output from SQ01 -> InfoSer Query, the output is what I expect. However, if I execute the query itself, it does not show the additional fields I just created.
    I notice that in the Basic List layout design, the new fields are on a new line and not appended to the same line as the output fields before I did the modifications. I already tried to manipulate the output length and positions, but it didn't help. I turned on the ruler to drag the fields in the desired positions, sometimes it works but not for all the fields. Can someone help me please?

    I figured it out already. The maximum width for the report output is 255 only. Switching from graphical query painter, I got the error that some fields were overlapping. Then I recalculated the starting positions of the fields and adjusted their lengths. 

  • Crystal Reports Cross-Tab Report not showing all available fields

    I am running CR2008 against MS SQL Express.  I have several tables with fields and data in them and can create standard reports to show all the data in all the fields.  However, when I try to create a cross-tab report, only some of the fields appear for me to choose from.
    I created a standard report with all the fields I needed in my cross-tab report and ran a preview.  Everything was there.  I then added a cross-tab object, selected the tables only to find that fields that are in the main report are not showing up for selection in the cross-tab.

    UPDATE:  I exported the entire database from MS SQLExpress to MS Access and I am having the same issues, so it does not appear to be a problem with the database engine and, since the standard tabular reports show the fields, I am at a loss as to why they don't show up in the cross-tab or the Parameter fields.
    I am creating the cross-tab through the Cross-Tab wizard.  Is there maybe a bug in that?  Is there a way to create it otherwise?

  • ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

    ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
    - For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this? 
    Thanks
    Kosin Usuwanthim

    It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

  • Calculate result as average in the report not showing average for all

    Hello,
    I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
    1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
    2. Aggreagation tab: exception aggregation: Total and reference char: []
    Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
    Please help me in resolving the issue- why portal not showing value for all.
    Thanks,
    Vijaya

    SAP note solved the purpose.
    Thanks & Regards,
    Vijaya

  • Do not show dots for 'free' events in the calendar month view

    I wish I could.... not show dots for 'free' events in the calendar month view. For an overview of when I have hard-scheduled events in the calendar it's pretty tedious and slow to go day -by day, and other views... Instead the dot  in the month view... - why does it show even "free" events? Any ideas, tips?
    Thanks!

    Unfortunately there is no option to disable the dots.
    <Edited by Host>

  • Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to setting-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    Since upgrading to the newest version of ios 8, I can no longer share my photos on facebook. I have tried going to settings-privacy-photos, but the facebook app does not show up for me to change the settings. Any suggestions?

    when you opened the shared library with the newer version of iPhoto (iPhoto '11) you were given a warning that your library would be converted and could not be used by older versions - you clicked ok to go ahead - there is no updo available - either upgrade to iphoto '11 of the MBP or load your backup of the iPhoto '09 library on it - older versiopns of i{Photo can not read newer libraries
    LN

  • I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

    I just downloaded Acrobat XI and the addin options is not showing up for Access 2010

    Acrobat XI Pro/Standard doesn't support MS Access 2010:  http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
    Third-party version/ Acrobat Version (ship  date)
    Acrobat 6
    (April 2003)
    Acrobat 7 (January 2005)
    Acrobat 8
    (November 2006)
    Acrobat 9 (July 2008)
    Acrobat X (November 2010)
    Acrobat XI (October 2012)
    MS Access
    Office 97
    x
    x
    x
    x
    x
    x
    Office 2000 (Office 9)
    N/A
    √
    √
    x
    x
    x
    Office XP (Office 2002/Office 10)
    N/A
    √
    √
    √
    x
    x
    Office 2003 (Office 11) (11/17/03)
    N/A
    √
    √
    √
    √
    x
    Office 2007 (Office 12) (11/30/06)
    N/A
    N/A
    √ (8.1)
    √
    √
    x
    Office 2010 (Office 14) 32 bit
    x
    x
    x
    x
    √
    x
    Office 2013 (Office 15) 32 bit
    x
    x
    x
    x
    x
    x

  • Why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7.  I'm sure it did when I first got my computer.  Could it be that I have lots of other photo software that may be interfering?

    why does adobe photoshop elements 6.0 not show up for a download choice of putting my photos into my computer, I'm on windows7.  I'm sure it did when I first got my computer.  Could it be that I have lots of other photo software that may be interfering?@@

    If you open the Organizer and go to Edit>Preferences>Camera or Card Reader, do you have Auto Launch Adobe Photo Downloader on Device Connect checked?
    Try checking that if you don't.

  • The DSLR sequence settings are not showing up for me. (I bought CS6)

    Like I said my DSLR sequence settings are not showing up for me even though I bought Premiere Pro CS6, I look for a solution but all that came up was that this happens with a trial verison and I don't know what to do.

    Did you buy ONLY PPro, or did you buy a suite?
    Did you install the program AND the extra content?
    Also... More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679

  • Newly Created Branches not showing up for Recruiter in the Requisition.

    Hi,
    We have created Branches as Administrator and the Branches are not showing up for Recruiter when trying to create the requisition. Any suggestion on this will be great help.
    Thanks.

    Hi,
    the most common reason for branches not showing up is caused if someone does not use the frontend for administrator but the IMG nodes for creating branches and assigning to companies. This is caused by missing bp role assignment.
    So check the branches in TCODE BP that they have the role for e-recruiting branch assigned. The standard delivey uses bp role RCFBRA but this can be changed in T77S0 RECFA BRARO.
    Furthermore you should check if T77RCFBRANCHCOMP entries are ok.
    Kind regards
    Roman

  • On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Anyone got a fix?

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

    On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

  • How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

    How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

    I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
    I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
    Anyway, if you choose to do so, you can leave feedback here:
    Apple.com Feedback
    Apple Support Feedback
    Developer Feedback
    Product Feedback
    QuickTime Feedback
    Search Feedback

  • Cs6 bridge not showing thumbnails for raw file

    Just upgraded to CS6
    cs6 bridge not showing thumbnails for raw files.
    Can see thumbnails in CS5.1 bridge  and LR 4.2 which fortunately i did not uninstall.
    Bummer since I am up against a hard deadline.
    Really Sucks

    We can't know. You are not offering any system information or e.g. info about what image files you are working with. Since they do show up in your otehr programs, my assumption would be that you need to switch the Camera Raw engine back to the 2009/2010 version in Photoshop and not use the default new 2012 one. Perhaps your thumbnails will appear then....
    Mylenium

Maybe you are looking for

  • Can you hear me now? No you can't because the call was dropped.

    Hi, I switched to verizon about one year ago, excited about the great coverage they advertise. But coverage has recently stopped in my area, which is close to a large city plus I used to have great coverage.  When I call tech support they say that I

  • Oracle BPM worklist after login, error occured as ORABPEL-10585

    [2011-11-02T10:50:20.838+08:00] [AdminServer] [TRACE] [] [] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: d11522a6fd21ff39:-1c34818f:133620f6eb1:-8000-000000000000092c,0] [SRC_CLASS: o

  • Why doesnt my first generation accept apps?

    I had a third generation Itouch which recently broke and just decided to not work. I don't have a cell phone right now because I cant get a job anywhere and I decided that I would download the textfree app that I used for my old Ipod onto the first g

  • WebLogic server is shut down automatically(in win2k pro)

    After i install weblogic6.1 and run default server, I got the fowllowing message and then server is shut down automatically, I tried it days before, and it works, why not work now? Thanks in advance! moonriver <Nov 6, 2001 11:40:53 PM EST> <Notice> <

  • On Premise Exchange to O365, What is the migration sequence?

    I am about to migrate from an On-Premise exchange to O365. DirSync - What sequence are the objects and attributes synchronized? Hierarchically?, AD Schema? Exchange Sync - What sequence are the mail objects synchronized? inbox, calendar, notes etc or