Dry printer cartridges after not using printer for 20 days

I have a HP Photosmart Prem C310 using # 564 black ink cartridges. I use the printer infrequently (every 20 days or so). In between the printer is shut down. It appears that the ink drys out during this down time. Is there a way to extend the cartridge life? Should I pull the cartridge and store with original cap and plastic wrap or is there a way to preserve the ink in the printer? Thanks

Hi there acbulk,
This article should help store your cartridges. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Ipod freezing after not using it for 2 days

my Ipod freezes after not using it for 2 days, should i go to the apple store and get a new 1, or is this normal. If i do go to the apple store, i would probably get a nano right since they dont sell mini's anymore

What do you mean it "freezes". After 36 hours of inactivity the mini will go into 'deep sleep' mode. When awoken from deep sleep, the iPod will appear to reset. Is this what yours is doing? If so, it's normal.
Also, Apple still has a stock of minis available for warranty claims, so you wouldn't get a nano.
Cheers!
-Bryan

Album Art Disappears after not using iPod for several days...what up?

I've searched all the forums about this, but couldn't find anything on point. Album art loads fine from itunes to the ipod. as long as i'm using the ipod regularly, there's no problem.
but, if i don't use it for awhile, some of the album art has disappeared. More album art disappears if i wait longer b/t uses (i think). This is where you turn on your ipod and you get that apple screen, then after a while the normal first screen comes up (play lists, artists, albums, etc.).
Any ideas on why this is happening and what i can do to fix it? I'm running the latest itunes and the latest ipod updater (1-10-2006 i think). It's a 30gb color ipod.
thanks!
jeff

You didn't mentioned the last version of iTunes ... I had a similar problem with album art but after installing iTunes 6.0.3 (with iPod updater 2006-01-10) and going thru the drill of deselecting and selecting "Display album artwork in your iPod" everything was fine.
Hope this works.
¡Saludos!
Dell Dimension 8250 Windows XP

I went on iTUnes after not using it for awhile and all my playlists are gone. How can I find them?

Hi Apple community ---
I went on iTunes after not using it for awhile and my old playlists are all gone. My library seems intact, but I don't have a record of my playlists, except for what's in my iPod. I'm afraid to sync them to get the playlists back into my computer, becuase the last time I synced my iphone it erased all my contacts from both my iphone and my computer, and I don't want the sync operation to remove the playlists from the iPod as well.
I don't have any music on my iPhone, so the two devices in question are just the iTunes program on the computer (it's a Dell with Windows Vista) and my 160 GB iPod classic.
Thanks for your help!!!
Doc E

This post may be a clearer place to start...
tt2

How do I connect to my wireless HP officejet 4620 printer? I was connected when I set it up, have not used it for 10 days. Cannot figure out how to connect.

I purchased a new hp Officejet 4620 wireless printer about 10 days ago. I followed the directions with installing it and it worked great. I did not use it until yesterday. I was not able to print from the wireless printer. How do I correct this issue?

I called Office Depot where I bought the printer. I reinstalled the product software and it is printing. Thank you for your response.

After not using itunes for several months have lost prior purchases

I have lost my purchased music library. I dont use itunes regularly and had some trouble with access after forgetting my password ! While my access is restored and i have been able to purchase music since then, my original library still eludes me.
Contacting itunes seems difficult,and as I'm not savvy with computer technology, any advice with regard to my,or itunes shortcomings would be appreciated.

Scot,
You can download fresh copies of your past purchases, at no charge, by following this guide:
Download past purchases

HT1689 How can I retrieve/change iPOD password after not using it for a year and not remembering it? (Actual device, not Apple ID)

Been in Afghanistan for the past year, can't remember the password I put on the iPOD touch before I left. Tried all I thought it could be. Does anyone know how I can retrieve the password? Or, who I can contact to unlock it so I can either use the old one or change it if they can't figure out what it was? Thanks.

Thanks roaminggnome...
I am currently in demobilization and have no manual...is there someone I can look that up on the web? Thanks.

IPod music screen freezes after not using it for a while.

If I exit the music screen (while a song is still playing) and then return after a while, the screen will be stuck where I left it. It will show the same song even if another one has started and I will have to wait for a few seconds before it finally shows the new one. If anyone has any idea on how to fix it, i would really appreciate it! Thanks in advance!

- Try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- If problem persists the try a restore from backup
- If it still comes back try a restore to factory defaults/new iPod

Just set up my TC after not using it for a year. I've moved in that time, so naturally my IP address has changed. My question is, why does my airport utility still showing the old IP address?

And does this mean that my internet is still coming from the AT&T router, or from my TC?

Is the IP address 10.0.1.1?

L7780 poor print quality after not using for 6 months

Poor print quality after not using my printer for about 6 months. Ran thru the tools (clean printhead, aligh, etc . . .) didn't help. Replaced all chartridges, still no help.
I'm fairly tech savy, been in IT for 27 years starting with hardware support.
Question, can I manually clean the printheads or should I just replace. I would rather try to clean them manually after just shelling out > $ 170 on new chartridges.
thanks
Brent

Hi @Brentl
Yes, you can clean the printhead and the inside of the printer. The following document will help; 'The Following Printheads are Missing or Damaged, Replace the Printhead' Message Displays on the All....
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

My Macbook Pro purchased Dec 2011 has suddenly become very slow after not using for 2 weeks (close to frozen). What is the problem and how to solve it?

Need Help Ye,
boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it still very slow?

After not using my macbook pro for 10 days, my wireless mouse no longer works. (I had turned the computer off). I've gone in to mouse preferences but the computer won't recoginize the mouse. It worked fine before the trip. Batteries were changed.

After not using my macbook pro for 10 days, my wireless mouse no longer works. I had the computer turned off. I've changed the batteries, gone to universal preferences, mouse preferences but the computer won't recognize the mouse. Any suggestions?

Got it. Thanks. I deleted the mouse (not an apple, but a logitech which has worked fine for me) and then re-discovered it and it's working. Appreciate the advice.

After not using my iPad 3G for a month, I tried to charge it with no success

After not using my iPad 3G for over a month, I turned it on and saw that the battery icon showed a red band and that it needed to be recharged. I plugged in the 10w charger and the battery icon has not shown any progress after 3 hours on the charger. Is it my battery or do I need to be more patient?

The battery symbol will change when it is connected properly. It will not show the percentage, but a sideways lightening bolt indicating charging.
I tried to charge my new iPad using my PC, because this worked OK for my iPhone, but I now realize PCs do not have adequate wattage to charge the iPad.
Are you certain this is the original charger?
Many wall chargers do not have the wattage intended for the iPad, only for the iPhone.

DBCA can not use ASM for database storage due to following reason: Could no

Hi
I've a recently installed RAC11gR2(11.2.0.3) on HP-UX
I installed Grid Infrastructure with grid user:
Node1: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
Node2: # id grid
uid=1100(grid) gid=1000(oinstall) groups=1031(dba),1021(asmdba)
I installed the Oracle Server with oracle user:
Node1: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
Node2: # id oracle
uid=1101(oracle) gid=1000(oinstall) groups=1031(dba),1021(asmdba),1033(oper)
All related Grid Infrastructure is functioning well in both nodes:
$ crs_stat -t
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE node03
ora.FRA.dg ora....up.type ONLINE ONLINE node03
ora....ER.lsnr ora....er.type ONLINE ONLINE node03
ora....N1.lsnr ora....er.type ONLINE ONLINE node04
ora.asm ora.asm.type ONLINE ONLINE node03
ora.cvu ora.cvu.type ONLINE ONLINE node04
ora.gsd ora.gsd.type OFFLINE OFFLINE
ora....network ora....rk.type ONLINE ONLINE node03
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE node03
ora.scan1.vip ora....ip.type ONLINE ONLINE node04
ora....SM1.asm application ONLINE ONLINE node03
ora....03.lsnr application ONLINE ONLINE node03
ora....d03.gsd application OFFLINE OFFLINE
ora....d03.ons application ONLINE ONLINE node03
ora....d03.vip ora....t1.type ONLINE ONLINE node03
ora....SM2.asm application ONLINE ONLINE node04
ora....04.lsnr application ONLINE ONLINE node04
ora....d04.gsd application OFFLINE OFFLINE
ora....d04.ons application ONLINE ONLINE node04
ora....d04.vip ora....t1.type ONLINE ONLINE node04
$
The ASM instance are running well in both nodes
Connected with oracle user, the listener has registered perfectly the ASM instance in each node:
$
$ lsnrctl status
LSNRCTL for HPUX: Version 11.2.0.3.0 - Production on 16-MAY-2012 15:41:06
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for HPUX: Version 11.2.0.3.0 - Production
Start Date 16-MAY-2012 15:24:19
Uptime 0 days 0 hr. 16 min. 47 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/grid/diag/tnslsnr/node03/listener/alert/log .xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.133)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=16.0.0.136)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
The command completed successfully
$
$
DATA & FRA disk group are created:
$
$ echo $ORACLE_SID
+ASM1
$
$ asmcmd
ASMCMD>
ASMCMD> ls -lt
State Type Rebal Name
MOUNTED EXTERN N DATA/
MOUNTED EXTERN N FRA/
ASMCMD>
ASMCMD>
The big issue is... that the DBCA can not see the diskgroups. When I choose ASM Storage it can not see them. It shows the chart in blank and if i try to write the disk group, so the following message appears: can not use ASM for database storage due to following reason: Could not connect to ASM due to following error: ORA-01034 ORACLE not available
What can be passing in this case... ?
Thanks in advance

Thanks both
Really the problem initially was because of this:
[INS-06006] Passwordless SSH connectivity not set up between the following node(s): [node1, node2]. CVU may reports "PRVF-4007 : User equivalence check failed for user "user"" for same error
and I had to install node1 first and after node2 manually and perhaps for this the product was not well linked.
I resolved the problem establishing the keys with the wizard and after copying the following files from node1 to node2
/home/grid/.ssh -------> /home/grid/.ssh
authorized_keys
known_hosts
This is the procedure if you run the wizard at the node1.
The problem is that the wizard creates the keys incompletely...
Thanks

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,it wouldn't need to ask t

Aperture 3 shuts down every time I try to use it after only using it for one minute. Aperture closes then a pop up screen asks if I want to reopen Aperture. If somrone at Aperture didn't keep pushing a stop button for it to close,Apple wouldn't need to ask the stupid question"Do you want to reopen Aperture?" to begin with. Anyone out there having the same annoying problem?? I like Aperture or used to anyway,but if this nonsense continues, I will be forced to buy some other editor besides "No hanging fruit - Adobe photoshop CS5" or "I don't like you so I'm shutting down - Aperture".

Hello,
sorry to hear about your troubles, but we will need to have more technical information about your problem to be able to help you:
There may be several reasons that can cause Aperture to crash on start up:
You may have imported an image (or video) in an encoding that Aperture does not support, or that is larger than 2 GB, or that is corrupted and Aperture cannot process it
Your Aperture Library or Preferences may have been corrupted
Or you are having a system wide problem with your machine.
Or you may simple be running out of disk space.
It would help, if you could post the crash log from your last crash. Also, more details on your Aperture Library: Is it managed or references? how large is it? Is it on your system drive or on an external drive?
What have you done, shortly before the trouble started? Have you imported new images or videos? Did you install any plug-ins or any new software, lile Final Cut?
Try, if you can get Aperture to launch, if you defer the generation of Previews: Hold down the SHIFT-key immediately after you start Aperture to prevent preview generation for that session. If a damaged image in your library is preventing normal opening, this may allow you to start Aperture. If this succeeds, try to identify the broken image or video among the images you recently imported and remove it from the library.
Regards
Léonie
Don't you think your user name is a little bit tactless in an Apple provided forum?

Dry printer cartridges after not using printer for 20 days

Similar Messages

Maybe you are looking for