DTP got deactivated

Hi Experts, I had to adjust transformation and the system prompted me to create transport request. I transported that and now I got error code 4 and the connected DTP got deactivated. I was wondering what went wrong.
This is the logs of the error code 4:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
Rule 1 (target: 0RECORDMODE group: 01 Technical Group ): Constant is initial
Saving Objects with Type Transformation
Internal Activation (Transformation )
Preprocessing / Creation of DDIC Objects for Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
Post Processing/Checking the Activation for Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4 was activated
Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4 was successfully generated
Impact analysis of Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4
DTP affected by change has been deactivated
Transformation 02PUDKQZ1805JDM7EV4P9EUFVV7TZ2D4 activated
Please guide on this. Do I need to collect the Transformatio and DTP again?
Edited by: SAPman on Oct 9, 2008 1:55 AM

Hi
When you did some chnages to the trasnformation,then you need to activate the dtp again.
Lets collect the Trasnformation,DTP,Datasource and it will be no problem for trasnporting to qulaity.

Similar Messages

Local user got deactivated - login not possible

Hi all,
I have a Macbook using an user assigned to a domain and two local users also which are not assigned to that domain. I never had any issues so far and also assigned all three users as administrators.
Just now after I have used the domain user and wanted to logon to one of the local users, the password has not been accepted and a message stated that the user gots deactivated and I should contact the system administrator. I tried also the other local user and the same message appears.
I tried several things like disconnect from any network, removed the domain at the user settings, restarted several times but nothing helped. What is also very odd is that the checkbox for the quick user change is deactivated and cannot be checked.
Anyone had this also and knows a fix for this?
The system runs Mac OS X Yosemite 10.10.
Thanks!

Once you are in the web browser:
You can log in by using:
-Portal URL.System will ask you email as ID
-URL that directs you to ITS( is an URL that contains the string BBPSTART).System will ask you your user ID, PW and client.
My point is to check if ITS is working and portal not.
Thanks and Regards,
Abraham

Infoobject 0busobject which got deactivated

I am trying to activate the infoobject 0busobject which got deactivated due to reason that I changed one of the nav attribute to display attribute
1.it is giving conversion block lock error. i am not able to activate the BI content object . Can you tell me what do I do in se14 database utilities --- Forced conversion to use this functionality to activate my infoobject. I tried putting master data and sid table in se14 and then clicked forced conversion it is still not getting activated.
2. Another way please tell if i go to se16 and sdokmia table in first row i put BW* and then in 3 rd row i put what attribute since when i put 0Mainusage (/BI0/OIMAINUSAGE)
it does not show any record what should i put there?? and then what is the next step. if you can help me step by step.
3. I switched off in every cube that attribute where it was navigational.
please help me to resolve this
Regards
Soniya Kapoor

Dear Soniya,
You can always activate the same infoobject again from BC, just remove the Option Match(X)or Copy ...it would show you X, just remove it and reinstall it ..
Hope it helps..
Thanks,
Krish

Transormations and DTP got inactive in both DEV and QLTY

Hi,
I have transported transformations,dtp from development to quality,and also loaded data into the DSO.But suddenly I found that both in development and qualitysystem transormation and DTP got inactivated.How it is possible and what is the solution for this
Regards
Lucky

Hi,
Check this forum:
Re: How to check for the last changed date/time for Multiprov, DSO and Tran
Thanks...
Shambhu

HT201412 iPhone suddenly got deactivated. Cant use the phone now

My iPhone 4s suddenly got deactivated over night. Cannot access phone now. Can it have something to do with me haveing ios6 beta?

Go to https://developer.apple.com/devcenter/ios/index.action#downloads and download the iOS 6 to your computer.
1. Make sure you have the most up-to-date version of iTunes
2. Launch iTunes
3. Connect your iDevice to your computer
4. Select your device in the list on the left side bar of iTunes
5. Select the “Summary” tab in iTunes
6. Hold the Alt-key (Mac)/Shift-key (Win) and click on “Restore”
7. Instead of just restoring, iTunes will show you a dialog box to ask you for the location of the IPSW file that you want to use for restoring your iDevice
8. Select the file you just downloaded and hit the “Choose” button. Beware, some browsers may save the file as a “.zip” file. If this happens, just rename the file, and change the extension to “.ipsw”. This will make the file selectable again in iTunes.
9. Wait for iTunes to restore your device, go drink a coffee, and prepare to enjoy your newly installed iDevice!
http://www.icantinternet.org/2012/01/how-to-manually-install-and-restore-iphonei padipod-ipsw-files/

DTP got failes due to overlapping time intervals of data records

Hi,
Can any one suggest me how to solve this issue....
the problem is when iam loding Master Data DTP, the DTP is showing error message that Overlapping time intervals of data records.I mean the start data and end data for these error records are same.
Eg: For some employees the start date and end data are same.
Please advice , what can be done...
Immediate reply is realy appreciated.

Hi Shaik,
By checking this check box ...
You won't get any duplicate records, before loading the data DTP removes the duplicate records and loads into Master data.
So, you can avoid the duplicate records by checking this.
Regards,
Ravi Kanth

DTP got inactivated

Hi Experts ,
In BW system one DTP failed with below message
"No object directory entry for object R3TR DTPA DTP_4DV1PPE2E9AK4OC1NW16WQ66T
Assign a package
System setting does not allow changes to be made to object DTPA DTP_4DV1PPE2E9AK4OC1NW16WQ66T"
I tried to edit and create new DTP but not able to do it
Please help
Regards,
Puru

First of all , what are you trying to do ? Did you receive this message during transport? Which system ? Development ? Production?
You can change settings so that you are able to edit DTP even on the Production :
Go to RSA - > Transport connection - > Object changeability (button above the right frame)
Select DTPA object type and change the setting.
However I am not sure if this is enough in your case as I do not know what is the backround for your issue.
regards

Workflow event got deactivated?

Hi all,
I have created an workflow for Notification (IW21). When i create a notification the workflow event is getting deactivated and i am getting an error message "Workflow definition of task 'WS11111111' cannot be activated".
Can anyone please help me.
Regards,
Gautham

Hi Gautham,
Check the workflow which you are using if it is active. Could you give the workflow number (unless it is a custom built one) because WS11111111 doesn't exist in the system I have access to.
The event linkage gets deactivated because there is an error in the linkage or as in your case the workflow. The option "Behavior upon feedback" determines the behavior of the event linkage when an error occurs. In your case the event linkage gets deactivated. This has nothing to do with the error itself.
Regards,
Martin

Account got deactivated and won't reenable after payment.

Basically I brought some of this on myself by not paying the bill in a couple of months. Anyways I got the noaccess.verizon.net and payed my bill and waited there suggested 4 hours. Now two days later and many phone calls to support my account is pending. They do have the payment and everytime I talk to someone they.Tell me to wait 4 hours and it should be working. I just don't know what to do anymore, I need someone that can actually help me. I can still access the modem and router so its not spyware I would think. Any help would be greatly appreciated, and btw sorry for spelling or anything typing this from my phone.

I'm sorry you are having difficulty. An agent with access to your account will reach out to you directly by email, private message in the Forums and/or the billing telephone number on your Verizon account for more information or to help you resolve your issue.

Transformation & DTP deactivated in source system

Hi,
I am trying to load the data from one BI System to another BI system. I am generating Export Data Source for that .
But the Issue is that when i am doing this, in the source system transformation & DTP got Deactivated.
Can any body tell why this happens?
( My source system is BI Production so it is not allowing me to do any changes)
Thanks in advance,
Vaibhav

Hi,
You might not be having Authorizations to edit the DTP and transformations in Production server.
If the production server is closed... run the program :RSDG_TRFN_ACTIVATE
Make sure to check out check sap note 1408161. For BW 7.0 it is SP25...
If your system is not having the SP25 its not possible to use the above mentioned program.
The other way is to re-import the DTP and transformation to Prodcution in new TR.
Regards
KP

After deactivation asset still shows value in AR03 cumulative value

Dear All
After deactivation of an asset , it still shows value in AR03 cumulative acq value column. can somebody guide us
where my client is lacking as we deactivated the asset on 14.05.2008 in AS02 and transfer the asset value thrru ABUMN
but still the same asset is showing the value on 31.03.2009 .
Thanks in advance
VG

Dear Srinu
Does Deactivation really need manually entry of writing date in AS02 or date generates automatically thru ABUMN.
As i have already transfered value thru ABUMN and created one new asset against it.
The new asset is working properly but my deactivated my asset is quite trouble some. If I tick the box in Depreciation area
which is for deactivation, will all assets under that class will be deactivated ?
I just had same ABUMN procedure and my asset got deactivated.
I had one asset which is deactivated in 2008 mid, In 2008 AR03 shows 0 value but 2009 it shows its cumulative value.
In tag line my asset should not show the value after it's deactivation in AR03.
Please have some inputs on this.
Regards,
VG.
Edited by: viral guruji on Jul 2, 2009 12:30 PM

Inactive transformations and DTPs after running BDLS

Hi Experts
I ran the BDLS job, Restored , Activated and Replicated the S.S.
Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION " although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module /SDF/AL_MAP_TRANSID_LOGH does not exist." I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
Please advice
Thanks
PK

Prabu,
have you solved this issue?
I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
Please let us know how you solved it.
Appreciate your response
Shashi
Update:
Note# 1142908 fixed my issue..
Shashi
Edited by: Shashi on Sep 10, 2008 7:22 PM

Deactivated update rule

i have transported an infoprovider up to our target system and the update rule got deactivated. it was last changed by IMPACTED, and i have checked the structure of the infoprovider moved and there are no structural changes (e.g. addition/deletion of fields). the nav attributes and dimensions are the same as well. is there any thing else i should be checking? im not sure if the IO's structure should impact this, can someone verify?
points to be awarded

HI Mark Siongco
Yes You should activate the update rules and you need to do a transport .though u
r transporting the info provider alone..
Hope its helpful..!
Regards
R M K
Assining points is the only way of saying thanx in SDN ***

My phone deactivated while in my pocket, and when I try to reactivate it, it says that I am currently unable to connect to the activation server. Help?

I was in a play and the phone was in my pocket. I took it out to check it afterwards and it somehow got deactivated. I really have no idea what is going on. It tells me to enter my apple ID and my password, I do, and it says activating... then back to activate my iphone. Eventually it says the activation server is still down. Is anyone else having issues tonight?

I'm having the same problem and I'm running the beta version of IOS 7 but I don't know anything about the developer's blog. Can you assist me?
Thanks

DTP options

hi All,
I have seen many threads regarding DTP and would like to know which option is better to have in the DTP to manage error handling. We have four options in the DTP:
1) Deactivated(Switched off).
2) No update, No reporting
3) Update valid records, no reporting(request red)
4) Update valid records, reporting possible.
The reason i have started this thread is to find out the best practice to use the DTP for BI loads. Also, based on your experiences, which options should i go for DTP and for fixing the error loads,editing the data,etc.
Please advise.
Thanks in advance....

Hi Dorson,
When the error handling is set to Update valid records, no reporting(request red), DTP allows you to update valid data, the entire request turns red in case of errors. The advantage is that any errors occured during extraction is very visible (due to the red request). Disadvantage is, the data from the red request cannot be reported on.
With Update valid records, reporting possible (request green), the request is green irrespective of error records (upto a maximum limit of error records, to be set by user). Advantage, if very few records have errors, the correct updated records can be reported upon.
The below link contains some basic info on the topic:
http://help.sap.com/saphelp_nw04s/helpdata/EN/45/dc799c25c15592e10000000a1553f7/frameset.htm
Regards,
Rakesh

DTP got deactivated

Similar Messages

Maybe you are looking for