DTP loading to master data is running long due to lock on SID table
Hi All,
We have DTP loading directly from infoobject to master data infobject. DTP usually takes less than 30min to update but at times its observed the DTP runs for hours to update. No dump was found on ST22. and no locks on sm12 apart from this DTP. On analysing the log in sm37, we found exclusive locks on the SID tables.
18.03.2014 02:06:53 All records forwarded RSM2 730
18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014 RSAR 051
18.03.2014 02:22:33 All records forwarded RSM2 730
18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015 RSAR 051
18.03.2014 02:38:37 All records forwarded RSM2 730
18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016 RSAR 051
18.03.2014 02:55:25 All records forwarded RSM2 730
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE DBMAN 099
18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066" DBMAN 099
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00 DBMAN 099
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE DBMAN 099
18.03.2014 03:13:56 LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE DBMAN 099
18.03.2014 03:13:56 NOWAI DBMAN 099
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00 DBMAN 099
18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017 RSAR 051
18.03.2014 03:13:59 All records forwarded RSM2 730
18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018 RSAR 051
18.03.2014 03:34:25 All records forwarded RSM2 730
18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019 RSAR 051
18.03.2014 03:56:03 All records forwarded RSM2 730
18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020 RSAR 051
18.03.2014 04:19:56 All records forwarded RSM2 730
18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE DBMAN 099
18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068" DBMAN 099
18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02 DBMAN 099
18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE DBMAN 099
18.03.2014 04:44:09 LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE DBMAN 099
18.03.2014 04:44:09 NOWAI DBMAN 099
Is the lock on the SID table reason for the delay?? if so how to avoid this delay?
if not, What are the other possibilties to avoid this issue ??
Thanks in advance.
Hello Yogesh,
priority of the Job is 'A' . Is this related to lock on SID table as when i observe system logs for successful runs i don see the lock on SID table.
please refer the below log for successful run.
19.03.2014 07:16:21 EXTRACTION OF DATAPACKAGE 000051
19.03.2014 07:16:22 All records forwarded
19.03.2014 07:16:34 EXTRACTION OF DATAPACKAGE 000052
19.03.2014 07:16:34 All records forwarded
19.03.2014 07:16:47 EXTRACTION OF DATAPACKAGE 000053
19.03.2014 07:16:48 All records forwarded
19.03.2014 07:17:02 EXTRACTION OF DATAPACKAGE 000054
19.03.2014 07:17:03 All records forwarded
19.03.2014 07:17:17 EXTRACTION OF DATAPACKAGE 000055
19.03.2014 07:17:17 All records forwarded
19.03.2014 07:17:31 EXTRACTION OF DATAPACKAGE 000056
19.03.2014 07:17:32 All records forwarded
19.03.2014 07:17:45 EXTRACTION OF DATAPACKAGE 000057
19.03.2014 07:17:45 All records forwarded
19.03.2014 07:17:58 EXTRACTION OF DATAPACKAGE 000058
19.03.2014 07:17:59 All records forwarded
19.03.2014 07:18:11 EXTRACTION OF DATAPACKAGE 000059
19.03.2014 07:18:11 All records forwarded
19.03.2014 07:18:24 EXTRACTION OF DATAPACKAGE 000060
19.03.2014 07:18:24 All records forwarded
19.03.2014 07:18:37 EXTRACTION OF DATAPACKAGE 000061
19.03.2014 07:18:37 All records forwarded
19.03.2014 07:18:50 EXTRACTION OF DATAPACKAGE 000062
19.03.2014 07:18:51 All records forwarded
19.03.2014 07:19:04 EXTRACTION OF DATAPACKAGE 000063
19.03.2014 07:19:06 All records forwarded
19.03.2014 07:19:19 EXTRACTION OF DATAPACKAGE 000064
19.03.2014 07:19:20 All records forwarded
19.03.2014 07:19:32 EXTRACTION OF DATAPACKAGE 000065
19.03.2014 07:19:33 All records forwarded
19.03.2014 07:19:47 EXTRACTION OF DATAPACKAGE 000066
19.03.2014 07:19:47 All records forwarded
19.03.2014 07:19:53 EXTRACTION OF DATAPACKAGE 000067
19.03.2014 07:19:53 Start of Serial Processing Processing is Executed in the Same LUW
19.03.2014 07:19:53 Processing started for batch ID DTPR_1739894_1 process 3
19.03.2014 07:19:53 Processing completed for batch ID DTPR_1739894_1 process 3
19.03.2014 07:19:53 End of Serial Processing Executed in the Same LUW
19.03.2014 07:19:54 Technical status 'Green' (user ALEREMOTE)
19.03.2014 07:19:57 Set overall status to 'Green' (user ALEREMOTE)
19.03.2014 07:20:41 Processing completed for batch ID DTPR_1739894_1 process 2
19.03.2014 07:20:41 Job finished
Thanks
Similar Messages
-
DTP running long time to load master data due to lock on SID table
Hi,
we are facing a problem while DTP loading master data into targets(Info Objects).
It is taking long time to load data due to below error.
18.03.2014 01:03:23 All records forwarded RSM2 730 S
18.03.2014 01:13:39 EXTRACTION OF DATAPACKAGE 000009 RSAR 051 S
18.03.2014 01:13:40 All records forwarded RSM2 730 S
18.03.2014 01:24:50 EXTRACTION OF DATAPACKAGE 000010 RSAR 051 S
18.03.2014 01:24:51 All records forwarded RSM2 730 S
18.03.2014 01:38:34 EXTRACTION OF DATAPACKAGE 000011 RSAR 051 S
18.03.2014 01:38:41 All records forwarded RSM2 730 S
18.03.2014 01:52:10 EXTRACTION OF DATAPACKAGE 000012 RSAR 051 S
18.03.2014 01:52:10 All records forwarded RSM2 730 S
18.03.2014 02:06:51 EXTRACTION OF DATAPACKAGE 000013 RSAR 051 S
18.03.2014 02:06:53 All records forwarded RSM2 730 S
18.03.2014 02:22:32 EXTRACTION OF DATAPACKAGE 000014 RSAR 051 S
18.03.2014 02:22:33 All records forwarded RSM2 730 S
18.03.2014 02:38:36 EXTRACTION OF DATAPACKAGE 000015 RSAR 051 S
18.03.2014 02:38:37 All records forwarded RSM2 730 S
18.03.2014 02:55:25 EXTRACTION OF DATAPACKAGE 000016 RSAR 051 S
18.03.2014 02:55:25 All records forwarded RSM2 730 S
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE DBMAN 099 I
18.03.2014 03:13:56 TRUNCATE TABLE "/BI0/0600000066" DBMAN 099 I
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00 DBMAN 099 I
18.03.2014 03:13:56 SQL: 18.03.2014 03:13:56 ALEREMOTE DBMAN 099 I
18.03.2014 03:13:56 LOCK TABLE "/BI0/0600000066" IN EXCLUSIVE MODE DBMAN 099 I
18.03.2014 03:13:56 NOWAI DBMAN 099 I
18.03.2014 03:13:56 SQL-END: 18.03.2014 03:13:56 00:00:00 DBMAN 099 I
18.03.2014 03:13:58 EXTRACTION OF DATAPACKAGE 000017 RSAR 051 S
18.03.2014 03:13:59 All records forwarded RSM2 730 S
18.03.2014 03:34:24 EXTRACTION OF DATAPACKAGE 000018 RSAR 051 S
18.03.2014 03:34:25 All records forwarded RSM2 730 S
18.03.2014 03:56:03 EXTRACTION OF DATAPACKAGE 000019 RSAR 051 S
18.03.2014 03:56:03 All records forwarded RSM2 730 S
18.03.2014 04:19:55 EXTRACTION OF DATAPACKAGE 000020 RSAR 051 S
18.03.2014 04:19:56 All records forwarded RSM2 730 S
18.03.2014 04:44:07 SQL: 18.03.2014 04:44:07 ALEREMOTE DBMAN 099 I
18.03.2014 04:44:07 TRUNCATE TABLE "/BI0/0600000068" DBMAN 099 I
18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:02 DBMAN 099 I
18.03.2014 04:44:09 SQL: 18.03.2014 04:44:09 ALEREMOTE DBMAN 099 I
18.03.2014 04:44:09 LOCK TABLE "/BI0/0600000068" IN EXCLUSIVE MODE DBMAN 099 I
18.03.2014 04:44:09 NOWAI DBMAN 099 I
18.03.2014 04:44:09 SQL-END: 18.03.2014 04:44:09 00:00:00 DBMAN 099 I
18.03.2014 04:44:12 EXTRACTION OF DATAPACKAGE 000021 RSAR 051 S
18.03.2014 04:44:13 All records forwarded RSM2 730 S
For this long running data load we didnt find any short dumps and no locks available on SM12 also.
Please help on this.
Thanks,
Sankar.Can we know what kind of data source is this. attribute or text data source.
what is data volume? its less or more?
Actually we load direct access data thru dtp(No psa) into info objects for text data sources where have less data only.
While running your dtp is any attribute change run for the same info object ot any transactional loads are happening?
Is this happens on particular day or weekend or anydays?
Thanks -
Impact on transactional Loads if Master data is not loaded
Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul -
DTP problem on master data loading
Dear Experts
When we loading 0Employee master data daily, sometime PSA data can not reflect to master table
For example, data in PSA as following
10001 01/01/2008 01/31/2008 C1
10001 02/01/2008 08/31/2008 C1
10001 09/01/2008 12/31/9999 C2
After DTP request success running, the data as following
10001 01/01/2008 01/31/2008 C1
10001 02/01/2008 08/31/2008 C1
10001 09/01/2008 12/31/9999 C1
the C2 in PSA can not update to master table, this problem happened time to time, but it hardly find it until users' complain.
When I manually deleted DTP request from Master attribute list and re-load from PSA to master table, the problem can be fixed.
By the way, I have already set DTP Semantic Groups as Employee ID.
Anyone can advice it, thanks in advance.
Regards
Jiejie miao,
Previous master data already available in BW. every day load you need to load only changes. So last record is enough.
Eg:
Initial load on 01-01-2008
10001 01/01/2008 12/31/9999 C1
--> Data loaded on 2nd Jan and above data available in bw.
on 03-11-2008 you will get following records
10001 01/01/2008 11/02/2008 C1
10001 09/01/2008 12/31/9999 C2
Load these records on 03 Nov, so system updates accordingly.
Hope it Helps
Srini -
QM action not allowed for DTP requests in master data and Text tables
Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank youFolks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks -
Initial full load of Master data using process chain
Hi All,
Could you please help me regarding, initial master data load to characteristics with attributes and text. I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time. And one more doubt is, as per my knowledge we can't maintain more than one variant in an info package, is that right ? or we can ?
Means Start Variant -> Info Package (0Customer_Text, 0Customer_Attr,0BILL_TYPE_TEXT, BILL_CAT_TEXT) -> DTP ( ", ", ", ") -> ACR.
Your Help will be appreciated.
Thanks & Regards
SunilHi,
"I need to load master data to 23 info objects, by using process chain can I do full load of master data to all info objects at a time."
if there is no dependency between attributes then you add you can create process chains and trigger them at a time. No issues.
we can't maintain more than one variant in an info package, is that right ? or we can ?
With one info pack you can't load data to all 23 psa. because each data source have own psa. you need to sue 23 info packs.
in general start variant--> info pack --> dtp (assuming as your bw 7.x)---> attribute change run.
like that you need to create 23 chains
Or create one two big chains.
one is for attribute and another for text.
In attribute
start varaint--> info pack(info bject 1)--DTP(infoobject 1))--> info pack(infoo bject 2)-->dtp(infoobject 2).
Like that way you can create in series and parallel chains to load attributes data into info objects. at end you add change run for 6 info objects each. SAme you can do for text loads also.
Thanks -
Error in Loading Project master Data into BW from R3
Hi Experts,
Actually I am trying to load Project Master Data from R3 to BW through a BW Process chain, Its a daily activity which we are performing since long time.
But since last 2 days loading is getting failed with an error in ST22 in source system (R3):
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Exception CX_SY_REF_IS_INITIAL
Date and Time 27.09.2011 01:47:15
Short text
Access via 'NULL' object reference not possible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_CGPL_TASK==================CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "PREPARE_FOR_RELOAD" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->OUTLINE_PARENT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
I tried to reload the data but no help, I am not sure how to reolve this issue, I also contacted to BASIS even they are not aware of this error.
I am seeking help from you guys.
Please help to overcome this problem...!
Thanks.it seems basis issue
howver check below links
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/objects_objref_not_assigned-1793688
OBJECTS_OBJREF_NOT_ASSIGNED error in a background execution
thanks
pathak -
'Overlapping Time Intervals' error while loading the Master Data
Guys,
Need you help with this. I am trying to load the Master Data (attribute) for InfoObject 0FMD_FRSITM using DTP from DataSource 0FMD_FRSITM_ATTR and am getting an error 'Overlapping Time Intervals'.
This is happening due to overlapping Valid From/Valid To date's for the same Financial Statement Item (0FMD_FRSITM) with different Editions.
If I select the option 'Ignore Duplicate Records' while loading the data, it is successful. But not all the records are loads and Editions are missing.
Below is an example of how the data looks like.
FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
In the above scenario, the Valid To Data for record 1 and record 3 is the same (12/31/9999) and the record 3 is being ignore when I select the option 'Ignore Duplicate Records'.
And also I see that the Edition is not the Key Field.
Any suggestions or ideas? Appreciate your help.
Thanks.FRSITM Valid To Valid From Edition
1001 12/31/9999 04/01/2010 2010.1.1
1001 01/31/2010 03/01/2010 2010.1.2
1001 12/31/9999 02/01/2010 2010.1.3
1. While selecting ignore duplicate, make sure to-date is not part of symantic key.
2. if system comes across two same records it picks up the latest one.
3. It shall merge the timelines is overlap is found.
4. I hope Edition is time dependent attribute
I believe infoobjet key is FRSITM Valid To.
In your case because first record has more period and may be the latets record system ignore the earlier one with the same time interval.
have a look at Q table and you shall be able to figure out for your self.
Hope it helps
Vikash -
Error while loading the master data
Hi Masters,
When I tried to load the master data, data was not loaded. Monitor tells, in YELLOW color (0 records from 0). Status telling following things
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Could you please help me...
Thanks & Regards
Raja.SHi,
Check the TRFC log.
You can get to this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Removing errors:
If the TRFC is incorrect, check whether the source system is completely connected to the SAP BW. Check especially the authorizations of the background user in the source system.
Resolutions:
Reload the Master Data manually again from Info-package at RSA1. -
Hi BW experts!
currently iam working in bw3.x, my client is upgading to BI.7 Here we have sand box iam practing loading a master data in BI.7 version . mastrer data has been successfully loaded to psa . when i try loading the data from psa to DT by using of DTP its not taking all recorsds to dta target and its loading only one header record only . Can any one suggest me on this issue.i searced ain this issue in forums i did nt get any solution
Regards
RKHi rama krishan,
i think based on the keyfield all the data is over written and last record of PSA is available in infoobject master data.
check the data and load data with different keyfield data.
Regards
Daya Sagar -
Error while loading customer master data through Idoc (DEBMAS) from BODS
Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan GHi, did you referred this link : Error during customer master mass update through XD99
-
Hi experts!!!
I am going to load new master data in our BI.Our BI consists of some cubes and DSOs which have data from past 3 years and which are based on old master data.Now the Master Data is completely changed to new values and will be loaded into our BI.I have following doubt regarding this:
From past three years the transaction data that is loaded into our cubes and DSOs is based on Old Master data.Now if I suddenly load NEW master data values,what will happen to this old transaction data loaded until today?I can imagine that once I load new values,from now onwards,transaction data will be based on new values only.The question is what will happen to the old transaction data ?
Please assume both cases of Time Independent Master data and Time Dependent Master data while reading my question.
Thanks for your time.Hi,
Case1 (normal case, happens frequently) - Only attributes of master data has changed.
Your transaction data would reflect the old master data when you have master data lookups or reads on master data table (P, Q tables for time indep/time dep MD) for populating master data in the transaction data flow.
In case just the attributes on the master data objects like Customer/Material have changed and these are used at the query level, the queries would show the new attribute values. In case the time validity/dependency has changed, the new time validity takes effect. For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now MD gets changed and Person Y is responsible for Cost Center A from 01.01.2011 till 31/12/2015. If the report is run now, the person Y would be shown in the report.
Case 2 - The master data has big changes in the source system. for e.g. Cust 10000 is now 11111 or material 12345 is now 112233.
In these cases your historical transaction data would be showing old master data.
For e.g Person X is respnsible for cost center A from 01/01/2010 till 31/12/2012. Now Cost center A is changed to B and person Y is responsible for the same period. Old transactions with Cost center A shows X as responsible and new transactions with Cost center B shows Y as responsible.
Even if your master data has changed completely, there would not be any affect on the existing transaction data....as new master data entries would be written to the tables and the existing master data remains. -
If I have created selection packages to load to a master data object for example:
1. Load to 0MAT_PLANT
2. Five packages created filtered by plant range
If I kick off the first package do I need this load to finish before the second package can load into the object i.e. 0MAT_PLANT is locked by the first package or can I load packages in parallel to a master data object? If so how? ThanksThanks for that, have carried that out. I have observed the following would be grateful if someone could confirm
1. Have a package running 2+ million lines
2. Kick off a package with a few hundred thousand lines after the first package, will complete before first package
3. Get an error since the extract completes in R3. However cannot load to the object since it is locked by the first
4. Message below:
User BWR3REMOTE is preventing you from loading master data for
characteristic 0MAT_PLANT . The lock was set by the master data loading
process with the request number (DataPackage number)
REQU_46MIUD73IBHYLLD9KZCAX4P47(000226) on 20070729,171630(711753) . -
Error while loading 0Plant master data in PSA
Hi,
i am trying to load attributes master data for 0PLANT, but in PSA i get the following error:
<i><b>'Record 1 :Plant CU : No sales organization found; Local currency cannot be checked'</b> .</i>
We are not using SD module and so no sales organization data is maintained have through a couple of posts posted here in SDN,and have applied the correction instructions manually as stated in OSS note : 750322.(As mentioned for case 3). But i still get the same error.Hi,
The issue is due to errorneous record.
Delete the request in Master data and Try the following.
1) Goto PSA --> filter the Status (Red or Green)
Select the Red records and correct the data in which error is throwm.
After correcting the data, save and Right click PSA and give Start update immediately.
2) Load via Infopackage only to PSA and later update from PSA and check.
Any one of the above 2 methods will solve the issue.
Regards,
Balaji V -
Error when loading the master data
Hi all,
Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
Thanks in advance.
Regards,
Shaik.Hi,
Please go through the following threads:
PERFORM_CONFLICT_TAB_TYPE shortdump during data loading into ODS
Perform_conflict_tab_type error
PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
Next time you might want to just search the forum first... lots of surprises!
Hope this helps,
Cheers,
Gimmo
Maybe you are looking for
-
Lumia 920, Black update, and Internet sharing not ...
I have a pair of Lumia 920s, both the developer edition given out at Microsoft Build 2012. Both updated to Lumia Black/gddr3 yesterday without any issues, both running on AT&T. however, on one of them, the Internet Sharing no longer works, while on
-
How to remove file attachments using the SDK
I am looking for ways to programmatically remove file attachments from work items. If I recall correctly, the system only keeps the file for as long as the relationship exists, so that, in theory, the file is deleted from the database a soon as the
-
ITunes refuses to let me drag tracks in or out of or within playlists
With no pattern, just nasty surprises, iTunes refuses to let me drag tracks in or out of or within playlists. I have searched the Apple Support Communities and elsewhere and found no solutions which work. It's nothing to do with Wacom - I don't have
-
Which client number you use for the current project? You are given functional specs for a BDC program and you need to decide whether to write a method call transaction or a session. How u will decide? how do you get functional specs when you are ass
-
Hi I have 2 companies with seperate company codes in the same Organisation. One 1000 company manufactures the Fin product in plant 1.The fin.product is sold to outside customers & handled as a project in the 2nd company 2000 . During SO creation in t