DTP selection criteria in start routine
Hi,
I have a code in the start routine where a variable lv_date gets the date from the DTP selections...
DATA : i_filter TYPE rsbk_th_range,
wa_filter TYPE rsbk_s_range.
READ TABLE i_filter INTO wa_filter WITH KEY
fieldnm = 'ACT_GI_DTE '.
IF sy-subrc EQ 0.
lv_date = wa_filter-low.
ELSE.
But now my problem is that we are no more giving the range, instead we are giving the single value. so now my code should read the single value ( lv_date = wa_filter-low) instead of the low value of the range. So how can I achieve this?
I mean my lv_date should get the single value populated in the DTP selections instead of the low value of the range values.
How can i achieve this??
Regards,
Shreesh.
Hi,
When you give range in any variable, it lower value is captured in low whereas upper value is captured in high of the variable.
Now that you are no more giving range but only single values, it would be enough if your code reads the data from low of the variable.
Similar Messages
-
Problems in Start Routine of Transfermations (DTP)
Hi Abap OO Gurus,
I am migrating the 3.x data source to BI 7.0 ,here I am getting problems in DTP especially in the start routine . we are using the SP10, pls see the below code . I have fixed some code still I am getting problems at the below loop statement .
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0MPOINT Measuring point.
MPOINT TYPE /BI0/OIMPOINT,
InfoObject: 0MDOC Measurement Document.
MDOC TYPE /BI0/OIMDOC,
InfoObject: 0MPOBJ Object Number of Measuring Point Object.
MPOBJ TYPE /BI0/OIMPOBJ,
InfoObject: 0MPTYP Type of Measuring Point.
MPTYP TYPE /BI0/OIMPTYP,
InfoObject: 0PSORT Position Number of Measuring Point in Object (
*Sort Field).
PSORT TYPE /BI0/OIPSORT,
InfoObject: 0ASSEMBLY Assembly.
ASSEMBLY TYPE /BI0/OIASSEMBLY,
InfoObject: 0ATINN Internal Characteristic Number.
ATINN TYPE /BI0/OIATINN,
InfoObject: 0MDATE Date of Measurement.
MDATE TYPE /BI0/OIMDATE,
InfoObject: 0TIME Time.
TIME TYPE /BI0/OITIME,
InfoObject: 0DESIRSI Target Value for Measuring Point in SI Unit.
DESIRSI TYPE /BI0/OIDESIRSI,
InfoObject: 0TVIND Target Value for Measuring Point Is Defined.
TVIND TYPE /BI0/OITVIND,
InfoObject: 0MRMINI Lower Measurement Area Limit Is Defined.
MRMINI TYPE /BI0/OIMRMINI,
InfoObject: 0MRMINSI Lower Meas. Limit or Min. Total Counter Read
*ing in SI Unit.
MRMINSI TYPE /BI0/OIMRMINSI,
InfoObject: 0MRMAXI Upper Measurement Area Limit Is Defined.
MRMAXI TYPE /BI0/OIMRMAXI,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0CJUMPSI Counter Overflow Reading in SI Unit.
CJUMPSI TYPE /BI0/OICJUMPSI,
InfoObject: 0PYEARSI Annual Performance in SI Unit.
PYEARSI TYPE /BI0/OIPYEARSI,
InfoObject: 0CREATED_BY Created By.
CREATED_BY TYPE /BI0/OICREATED_BY,
InfoObject: 0READSI Measured Value/Total Counter Reading in SI Un
*it.
READSI TYPE /BI0/OIREADSI,
InfoObject: 0READEU Measured Value in Document Entry Unit.
READEU TYPE /BI0/OIREADEU,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
InfoObject: 0CNTRRSI Counter Reading in SI Unit.
CNTRRSI TYPE /BI0/OICNTRRSI,
InfoObject: 0CDIFFSI Counter Reading Difference in SI Unit.
CDIFFSI TYPE /BI0/OICDIFFSI,
InfoObject: 0CAT_TYPE Catalog.
CAT_TYPE TYPE /BI0/OICAT_TYPE,
InfoObject: 0CAT_GROUP Code group.
CAT_GROUP TYPE /BI0/OICAT_GROUP,
InfoObject: 0FI_STATUS Processing Status.
FI_STATUS TYPE /BI0/OIFI_STATUS,
InfoObject: 0DIM_ID Dimension Key.
DIM_ID TYPE /BI0/OIDIM_ID,
InfoObject: 0CNTIND Measuring Point is Counter.
CNTIND TYPE /BI0/OICNTIND,
InfoObject: 0EQUIPMENT Equipment Number.
EQUIPMENT TYPE /BI0/OIEQUIPMENT,
InfoObject: 0FUNCT_LOC Functional Location.
FUNCT_LOC TYPE /BI0/OIFUNCT_LOC,
InfoObject: 0CAT_CODE Code.
CAT_CODE TYPE /BI0/OICAT_CODE,
InfoObject: 0MRMAXSI Upper Meas. Limit or Max. Total Counter Read
*ing in SI Unit.
MRMAXSI TYPE /BI0/OIMRMAXSI,
InfoObject: 0DOCAF Measurement Document Included for Associated T
*ask.
DOCAF TYPE /BI0/OIDOCAF,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
*constants: c_tabname type rstlogotab value '/BI0/MEQUIPMENT'.
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
... "insert your code here
data: lt_data type ref to data.
data: ls_data type ref to data.
field-symbols: <G_T_0EQUIPMENT> type standard table.
field-symbols: <G_S_0EQUIPMENT> type any.
field-symbols: <FUNCT_LOC> type any.
field-symbols: <DATEFROM> type any.
field-symbols: <DATETO> type any.
constants: c_tabname type rstlogotab value '/BI0/MEQUIPMENT'.
$$ end of 2nd part global - insert your code only before this line *
CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
Method start_routine
Calculation of source package via start routine
<-> source package
METHOD start_routine.
*=== Segments ===
FIELD-SYMBOLS:
<SOURCE_FIELDS> TYPE tys_SC_1.
DATA:
MONITOR_REC TYPE rstmonitor.
$$ begin of routine - insert your code only below this line -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
In this start routine missing functional location for
an equipment is added to a Data Package record, if it is available
create data lt_data type table of (c_tabname).
assign lt_data->* to <G_T_0EQUIPMENT>.
create data ls_data type (c_tabname).
assign ls_data->* to <G_S_0EQUIPMENT>.
assign component 'FUNCT_LOC' of structure <G_S_0EQUIPMENT> to
<FUNCT_LOC>.
assign component 'DATE_FROM' of structure <G_S_0EQUIPMENT> to
<DATEFROM>.
assign component 'DATE_TO' of structure <G_S_0EQUIPMENT> to
<DATETO>.
CALL FUNCTION 'RSAU_READ_MASTER_DATA'
EXPORTING
I_IOBJNM = '0EQUIPMENT'
I_FLG_WHOLE_TABLE = 'X'
IMPORTING
E_TABLE = <G_T_0EQUIPMENT>
EXCEPTIONS
READ_ERROR = 1
NO_SUCH_ATTRIBUTE = 2
WRONG_IMPORT_PARAMETERS = 3
CHAVL_NOT_FOUND = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 0.
LOOP AT <G_T_0EQUIPMENT> INTO <G_S_0EQUIPMENT>.
IF <FUNCT_LOC> IS INITIAL.
DELETE <G_T_0EQUIPMENT>.
ENDIF.
master data collected and condensed
ENDLOOP.
<b>LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
IF ( SOURCE_PACKAGE-FUNCT_LOC IS INITIAL ) AND
( SOURCE_PACKAGE-EQUIPMENT IS NOT INITIAL ).
READ TABLE <G_T_0EQUIPMENT> WITH KEY
('EQUIPMENT') = SOURCE_PACKAGE-EQUIPMENT INTO <G_S_0EQUIPMENT>
IF SY-SUBRC = 0.
IF ( SOURCE_PACKAGE-MDATE >= <DATEFROM> )
AND ( SOURCE_PACKAGE-MDATE <= <DATETO> ).</b>* record for equipment exists and valid
SOURCE_PACKAGE-FUNCT_LOC = <FUNCT_LOC>. MODIFY SOURCE_PACKAGE.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
WHEN 4.
master data is not (yet) loaded
WHEN OTHERS.
problem occured, output as warning
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
ENDCASE.
if abort is not equal zero, the update process will be canceled
DEL :ABORT = 0.
Please adjust the syntax manually.
- Automatically replaced: COMM_STRUCTURE with SOURCE_FIELDS
- Included the new Exception Handling (instead of ABORT)
$$ end of routine - insert your code only before this line -
ENDMETHOD. "start_routine
Method inverse_start_routine
This subroutine needs to be implemented only for direct access
(for better performance) and for the Report/Report Interface
(drill through).
The inverse routine should transform a projection and
a selection for the target to a projection and a selection
for the source, respectively.
If the implementation remains empty all fields are filled and
all values are selected.
METHOD inverse_start_routine.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "inverse_start_routine
ENDCLASS. "routine IMPLEMENTATION
here I am getting the error like ""SOURCE_PACKAGE" is a table without a header line and therefore has no component called "FUNCT_LOC". I tried many ways to fix this problem.
Could you some kind soul educate how to fix the problem .
Thanks in advacne ,RP.Since the MONITOR is a table without header-line, u can no longer use it as a workarea for record entry. You can use MONITOR_REC defined in the data-section of this method to fill in the record and then append it to the table.
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
has to be replaced with
clear MONITOR_REC.
MONITOR_REC-MSGID = SY-MSGID.
MONITOR_REC-MSGTY = 'W'.
MONITOR_REC-MSGNO = SY-MSGNO.
MONITOR_REC-MSGV1 = SY-MSGV1.
MONITOR_REC-MSGV2 = SY-MSGV2.
MONITOR_REC-MSGV3 = SY-MSGV3.
MONITOR_REC-MSGV4 = SY-MSGV4.
APPEND MONITOR_REC to MONITOR. -
Hi
How to write a lookup in Start Routine to calling customer table. we are maintains values in custom table.
i am
Regds,DSHi,
You simply need to create an internal table of type customer table in start routine global declaration part.
After that you will have to populate that internal table using select query in start routine. e.g.
SELECT *
FROM XYZ
into table it_xyz
where key1 = 'AB'. etc.
In this case XYZ is customer table and it_xyz is internal table. Once values are available in internal table you can use them in field routine or start routine as per the need.
Regards,
Durgesh. -
Internal table on Start Routine
Hello
I have 5 key figures. They have an standard routine with a select statement. Basically they have to read an external DSO and get some fields values.
As all of them have the same SELECT statement I think it would be better to replace this with a select in the Start Routine, in order to improve performance. But unfortunatelly I'm not an abap programmer.
How could this be replaced in the Start routine ?
select single EXRATEXACC DOC_CURRCY NETVAL_INV
into (h_rate, h_dcurr, h_inv)
from /bic/azsdbiio100
where BILL_NUM eq SOURCE_FIELDS-/BIC/ZREFDOC
and BILL_ITEM eq SOURCE_FIELDS-/BIC/ZREFDOCLN
and COMP_CODE eq SOURCE_FIELDS-COMP_CODE.
if sy-subrc ne 0. " Not found
select single EXRATEXACC DOC_CURRCY NETVAL_INV
into (h_rate, h_dcurr, h_inv)
from /bic/azsdbiio100
where DOC_NUMBER eq SOURCE_FIELDS-DOC_NUMBER
and S_ORD_ITEM eq SOURCE_FIELDS-S_ORD_ITEM
and COMP_CODE eq SOURCE_FIELDS-COMP_CODE.
if sy-subrc eq 0.
h_flag = 'X'. " Document found
endif.
else.
h_flag = 'X'. "Document found.
endif.
if h_flag = 'X'.
if h_dcurr ne SOURCE_FIELDS-CURRENCY.
if h_rate lt 0.
h_rate = h_rate * ( -1 ).
clear h_amount.
if h_inv ne 0.
h_amount = h_inv.
else.
h_amount = SOURCE_FIELDS-/BIC/ZG_AVV104 * h_rate.
endif.
elseif h_rate gt 0.
if h_inv ne 0.
h_amount = h_inv.
else.
h_amount = SOURCE_FIELDS-/BIC/ZG_AVV104 / h_rate.
endif.
else.
h_amount = SOURCE_FIELDS-/BIC/ZG_AVV104.
endif.
else.
h_amount = SOURCE_FIELDS-/BIC/ZG_AVV104.
endif.
RESULT = h_amount.
CURRENCY = h_dcurr.
endif.
endif.Hi,
what you need to do first is to define internal tables in the start routine for each individual routine with the key fields. So look at the different SELECT SINGLE statements and build up the internal table(s). So for the first one you need to define an internal table with fields BILL_NUM, BILL_ITEM, COMP_CODE (your key) and EXRATEXACC, DOC_CURRCY and NETVAL_INV. I don't know if you can combine the two select single statements, that will depend on if BILL_NUM is the same type of field as DOC_NUMBER.
After declaration of the internal tables you can fill the bales by doing a SELECT instead of select single INTO the internal table.
In the individual update rules you can do a READ TABLE (internal table) WITH KEY yyyyyy
In this way you only have to access the DB once per data package and read from the internal memory for each record, which will definitely improve performance.
Hope this helps! -
Hi Friends !
Facing a bit strange issue. When I run the DTP with selection for all AC_DOC_NO, start routine works fine & I am getting the expected result. But when I run the DTP without selection, result is not as expected. During debugging also I can see the correct records. Please advise.
With Regards
RekhaHi,
If you are loading to DSO, I am sure there could be some overwrite is happening where u r missing the expected records.
if this is the scenario then try to add keyfield in DSO to overcome from overwrite. -
Performance with select in Start routine
Hi,
I open a request because i have some troubles in a update rules.
In this update rule i have several select function on master data and i takes just 3-4 minutes by packets (which is OK for my daily extraction). But my users needs now a data taht i need to extract from SD invoice ODS. and in this ODS i have 3 000000 lines.
I made the test and it takes too many times.
I try several solutions as :
Select.... into internal table --> too many times
Select ... for all entries .... into internal table...--> Too many times
I tried to create a small ODS with just the key level and data i need for my start routine based on invoice ODS. And i now from 3000000 to 300000 records. but now it takes 15 minutes by packets.
My question is do you have any idea to improve performance ?
What is the max size or number of records for an internal tables ?
Thanks
CyrilReading that much, you might have some memory issue.
"Data objects that are defined either with the data type of an internal table, or directly as an internal table, are always fully defined in respect of their line type, key and access method. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table."
if you need the link to the above doc....
http://help.sap.com/saphelp_47x200/helpdata/en/fc/eb3660358411d1829f0000e829fbfe/frameset.htm
thanks.
Wond -
Index used or not for selecting data from ODS in a start routine
Dear friends,
In the start routine of the update rules to a cube, I am reading some data of an ODS in to an internal table .
The ODS is indexed. But, I am not sure if the index is at all used in the Select statement (that gets the data from ODS to the internal table in the start routine) while loading data to the cube.
Any help is highly appreciated.
regards,
atlajHi Atlaj
You can findout this is display execution plan for SQL statement in DB02.
Goto DB02. and under diagnostic, you find explain. Select that and enter your query. Make sure that everything here is in capital format. Below is a sample query which I have entered.
SELECT "CRM_SALORG" "SALESORG" FROM "/BI0/QORGUNIT"
WHERE "SALESORG" = ? AND "OBJVERS" = ? AND "DATETO" >= ?
AND "DATEFROM" <= ?
The select parameters should be inside qoutes and in caps and even the from table. Once you enter your query in this format, click on explain. It will show the index scan if the index is present. the output for my query will be something like
0 SELECT STATEMENT ( Estimated Costs = 1,348E+01 [timerons] )
1 (COOR) RETURN
2 ( 0) TQ
3 ( 0) FETCH /BI0/QORGUNIT
4 ( 0) IXSCAN /BI0/QORGUNIT~Z1
Where my last statement (line 4) is showing index scan and the name of index read is Z1.
Hope this helps.
Please let me know if you have any problems entering the query in the specified format and u get any error.
Regards
Sriram -
Strange select statement behavior in start routine during extraction
Hi, All..
I'm receiving some odd behavior from a select statment being processed in batch mode (specifically, when run in a normal BW extractor - start routine), the select yields no results .. sy-subrc = 4 and target itab is empty. however, when i run this same select statement in debug, i get sy-subrc = 0 and records are returned!! I tried putting the select statement in a standard abap program & it came back successfully in both foreground & background. something is strange when run in the BW extractor process?? anyone familiar with this?? any help is appreciated!! Thanks!!Thanks everyone for the comments!
The code is in the start routine from 0BBP_CONF_TD_1 into 0BBP_CON.
-The select returns records when in debug
-I've tried running it open without the "for all entries" & it still fails in batch
-The select works during the delta but always fails on the initial load
The select is a join:
DATA: BEGIN of t_JOIN1 OCCURS 0,
CONNUM LIKE /BI0/ABBP_CON00-BBP_CON_ID,
CONITEM LIKE /BI0/ABBP_CON00-BBP_COITEM,
PONUM LIKE /BI0/ABBP_PO00-BBP_PO_ID,
POITEM LIKE /BI0/ABBP_PO00-BBP_POITEM,
ACGUID LIKE /BI0/ABBP_PO00-BBP_ACGUID,
SCNUM LIKE /BI0/ABBP_SC00-BBP_SC_ID,
SCITEM LIKE /BI0/ABBP_SC00-BBP_SCITEM,
REQSTR LIKE /BI0/ABBP_SC00-BBP_REQSTR.
DATA: END of t_JOIN1.
SELECT a~BBP_CON_ID
a~BBP_COITEM
a~BBP_PO_ID
a~BBP_POITEM
b~BBP_ACGUID
c~BBP_SC_ID
c~BBP_SCITEM
c~BBP_REQSTR
INTO TABLE t_JOIN1
FROM /BI0/ABBP_CON00 as a
INNER JOIN /BI0/ABBP_PO00 as b
ON aBBP_PO_ID = bBBP_PO_ID AND
aBBP_POITEM = bBBP_POITEM
INNER JOIN /BI0/ABBP_SC00 as c
ON bBBP_SC_ID = cBBP_SC_ID
AND bBBP_SCITEM = cBBP_SCITEM
FOR ALL ENTRIES IN DATA_PACKAGE
WHERE a~BBP_CON_ID = DATA_PACKAGE-BBP_CON_ID AND
a~BBP_COITEM = DATA_PACKAGE-BBP_COITEM AND
a~BBP_COITEM <> 0 AND
b~BBP_ACGUID <> '0000' AND
c~BBP_SCITEM <> 0. -
Error "Overlapping selection criteria with DTP" when transporting DTP
When transporting a DTP from Dev to QA I get the following error in the trasnport log:
Overlapping selection criteria with DTP DTP_4APJZSGKYQLUQYBCDBWK707JO
Message no. RSBK019
Diagnosis
The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_4APJZSGKYQLUQYBCDBWK707JO in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
System Response
You cannot activate the DTP with the current selection criteria.
Procedure
Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_4APJZSGKYQLUQYBCDBWK707JO.
The DTP is a delta process which loads data from one infocube into an DSO. I understand that the error is that it is transporting the Delta parameters (something similar to a Delta initialization of infopackages I suppose) but I don´t how to access the information of the delta (selection criteria) of a DTP.
Any suggestions? or similar experiences?
Thanks in advance
nicoláHello,
You can modify a parameter to create and modify dtp in Production. Like normally is done with Infopackages. There is no reason to make the changes in Dev in the Infopackages and DTP, and transport to Production. This transports normally cause that kind of errors because the id's are different in Dev, QA and Prod, and it is difficult to change dtp in that way.
To change the parameter do like this:
Execute Trx. RSA1 -> Transport Connection -> Tab Object Changeability -> Change DTPA to Everything Changeable.
Do this in Dev, QA and Prod.
Regards,
Jorge Diogo -
Regarding Selection Criteria features in BI7 Info package maintenance
Hi,
In BI7.0, I have to load data from the Business content ODS, 0FIGL_O02 to Customized ODS by restricting the data as per the document types.
Do we have that feature in BI7, to restrict the data in info package maintenance's selection criteria.Please let me know, when we dont have that feature...where can i apply this restriction for loading one data target to another data target.
Thanks,In BI 7.0 you will be using DTPs to load data from one DSO to the other. There will be no Infopackages involved.
You can filter based on Document types in two ways.
1. Build the filter in the start routine of your transformation itself to delete datapackage whenever document type is not equal to what you want.
2. DTPs have a filter button. When you go in change mode you will be able to choose the infoobjects on which you want to filter. You can enter the required Document types in the filter here.
If helpful, assign points -
Using internal tables in BI 7 Start routines
Hi All
I tried searching for using internal tables in a start routine in BI 7 could not find the right pointers.
This is what I am trying to do is the following:
In a DSO ZSD_O01 I have a sales order and sales order item number and this DSO also contains the Contract number and the contract Item number.
The DSO structure is as follows:
/BIC/AZSD_O0100
DOC_NUMBER
ITEM
CONTRACT
CITEMNUM
I want to read the data in this DSO into a internal table. But the key fields in this DSO is DOC_NUMBER and ITEM so I want to read this data into a internal table only for the first data package into the internal table. Thereafter I want to lookup into the internal table given the doc_number and ITEM to find the CONTRACT and CITEMNUM.
Can any of you kindly show me how to :
- Read data from a DSO into a internal table
- Read the internal table for the first data package
- How do I make the access in the internal table fast when my lookup in the internal table is not on the
DSO key columns but on a different key column
Appreciate your help
Thanks
KarenHi Karen ,
It will be helpful if you tell your requirement as the approach you suggested is not looks convincing .May be their is some easy way and we can suggest you better approach
-how to check for source_package = 1
You need to hard code it .
We decide package size at DTP level so you can declare a global variable .let say you have 50000 size of your package then use global variable as counter and read only when record_count is <= 50000 .
-how to declare the internal table so the values in it exists between different data packages
Declare a global table and select data into it .A global table retain data across the packages .
- The key on which I need to lookup in the internal table is not the key fields as in the DSO
Its ok .Let say you are doing lookup on A B and C field of DSO1 and the values may duplicate in your source .then you just need to read the internal table having data from DSO2 with key field A B C .
Better if you set them as semantic keys at DTP level so that all duplicate entries of A B C will appear in same package .
global Declarations
In your start routine you will have this following code :
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... insert your code here
$$ end of global - insert your declaration only before this line -
One question
Why you want to populate values for 1 source package only not for all ?This will be helpful to understand your requirement and may be we can fulfill it in some other manner .
Regards,
Jaya Tiwari -
Selection Criteria addition-Not working
Hi!
I have this report wherein I need to add two fields VBAP-Kunnr and knvv-konda in the selection screen so that I can do my drill down or search criteria based upon these two selections also apart from the existing ones, but unfortunately I am unable to get throiugh this and somehow putting this two selections in the selection criteria its not taking any effect or its just actinga dummy selection and I am unale to drill down my report based upon those. Can anyone have a look and let me know what could be the problem please. Help would be highly appreciated.
Thanks
*& Include ZSD_PFGENERATETOP Report ZSD_PFGENERATE
REPORT zsd_pfgenerate LINE-SIZE 170 LINE-COUNT 65.
TABLES: lips, likp, vbap, vbak, vbrp, vbpa, vbrk.
CONSTANTS: cns_vgtyp TYPE vbrp-vgtyp VALUE 'J',
cns_intyp TYPE vbrk-vbtyp VALUE 'M',
cns_vkorg TYPE vbak-vkorg VALUE 'CA01',
cns_vkorg_US type vbak-vkorg value 'US01', "DEVK903521
cns_parsh TYPE vbpa-parvw VALUE 'WE',
cns_parsp TYPE vbpa-parvw VALUE 'AG',
cns_parre type vbpa-parvw value 'RE', "bill-to
cns_auzwp TYPE vbak-auart VALUE 'ZWP',
cns_auzct TYPE vbak-auart VALUE 'ZCT',
cns_auzif TYPE vbak-auart VALUE 'ZIF',
cns_auztm TYPE vbak-auart VALUE 'ZTM',
cns_fkff TYPE vbrk-fkart VALUE 'ZFF5',
cns_fkos TYPE vbrk-fkart VALUE 'ZOF5',
cns_upd(1) TYPE c VALUE 'S',
cns_mode(1) TYPE c VALUE 'N'.
Internal Tables and Work Areas
DATA: BEGIN OF it_vbpos OCCURS 0,
werks TYPE vbap-werks,
audat TYPE vbak-audat,
auart TYPE vbak-auart,
kunag TYPE vbak-kunnr,
name1_ag TYPE kna1-name1,
kunsh TYPE likp-kunnr,
name1_sh TYPE kna1-name1,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
vbdel TYPE likp-vbeln,
psdel TYPE lips-posnr,
kunre type kunre, "Bill-to Party
name1_re type kna1-name1, "Bill-to Party Name
END OF it_vbpos,
BEGIN OF it_vbpos_temp OCCURS 0,
vgbel TYPE lips-vgbel,
vgpos TYPE lips-vgpos,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
END OF it_vbpos_temp,
BEGIN OF it_report OCCURS 0,
werks TYPE vbap-werks,
vbeln TYPE vbak-vbeln,
vbdel TYPE likp-vbeln,
audat TYPE vbak-audat,
auart TYPE vbak-auart,
name1_ag TYPE kna1-name1,
name1_sh TYPE kna1-name1,
name1_re type kna1-name1, "Bill-to Party Name
mark(1) TYPE c,
END OF it_report,
BEGIN OF it_vbeln OCCURS 0,
vbeln TYPE vbak-vbeln,
END OF it_vbeln,
wa_vbeln LIKE LINE OF it_vbeln,
wa_vbpos LIKE LINE OF it_vbpos,
wa_report LIKE LINE OF it_report,
wa_sel LIKE LINE OF it_report.
DATA: it_vbrp type table of vbrp,
it_vbrk type table of vbrk.
BDC Variables
DATA: BEGIN OF bdc_tab OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
DATA: wa_bdc LIKE LINE OF bdc_tab,
it_bdcmess TYPE TABLE OF bdcmsgcoll.
*& Selection-Screen definition
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-002.
PARAMETERS: p_rdff TYPE c RADIOBUTTON GROUP rad1 DEFAULT 'X',
p_rdos TYPE c RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK block2.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_werks FOR vbap-werks OBLIGATORY NO INTERVALS,
s_auart FOR vbak-auart,
s_kunag FOR vbak-kunnr, "Sold-to Party
s_kunnr FOR likp-kunnr, "Ship-to Party
s_kunre for vbak-kunnr, "Bill to Party
s_vdatu FOR vbak-vdatu OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block0.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
PARAMETERS: p_vgbel TYPE vbak-vgbel.
SELECTION-SCREEN END OF BLOCK block1.
selection-screen begin of block block3 with frame title text-003.
parameters: p_billed RADIOBUTTON GROUP r1,
p_delvd RADIOBUTTON GROUP r1 default 'X',
p_all RADIOBUTTON GROUP r1.
selection-screen end of block block3.
*& Include ZSD_PFGENERATEE01
START-OF-SELECTION.
PERFORM read_report.
END-OF-SELECTION.
SET PF-STATUS 'STAT1000'.
IF it_vbpos[] IS INITIAL.
MESSAGE s999(z001) WITH 'No Data Selected for this criteria'.
ELSE.
PERFORM show_report.
ENDIF.
*& List Events
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'SELE'.
LOOP AT it_report INTO wa_report.
wa_report-mark = 'X'.
MODIFY it_report FROM wa_report.
ENDLOOP.
PERFORM show_report.
WHEN 'DSEL'.
LOOP AT it_report INTO wa_report.
wa_report-mark = ''.
MODIFY it_report FROM wa_report.
ENDLOOP.
PERFORM show_report.
ENDCASE.
AT LINE-SELECTION.
DO.
READ LINE sy-index FIELD VALUE wa_report-mark wa_report-vbeln
wa_report-vbdel.
IF sy-subrc NE 0.
EXIT.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_report-vbeln
IMPORTING
output = wa_report-vbeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_report-vbdel
IMPORTING
output = wa_report-vbdel.
READ TABLE it_report INTO wa_sel
WITH KEY vbeln = wa_report-vbeln.
IF sy-subrc EQ 0.
wa_sel-mark = wa_report-mark.
MODIFY it_report FROM wa_sel INDEX sy-tabix.
ENDIF.
ENDIF.
ENDDO.
REFRESH: it_vbeln.
LOOP AT it_report INTO wa_report WHERE mark EQ 'X'.
CASE 'X'.
WHEN p_rdff.
wa_vbeln = wa_report-vbdel.
WHEN p_rdos.
wa_vbeln = wa_report-vbeln.
ENDCASE.
APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
SORT it_vbeln BY vbeln.
DELETE ADJACENT DUPLICATES FROM it_vbeln.
IF NOT it_vbeln[] IS INITIAL.
PERFORM process_vf01.
ENDIF.
*& Include ZSD_PFGENERATEF01
*& Form read_report
Routine to read applicable orders from database
FORM read_report.
DATA: lwa_lips TYPE lips,
lc_vbeln TYPE vbrk-vbeln.
Retrieve sales orders based on selection criteria where billing doc has not been
created for the delivery yet
REFRESH: it_vbeln, it_vbpos, it_report.
Select into table based on Onsite/Fixed Facility
CASE 'X'.
WHEN p_rdff.
changed for performance reasons (i.e. time-out)
k~vgbel is not in it_vbpos but was in select statment ?
SELECT vbap~werks vbak~audat vbak~auart vbak~kunnr AS kunag
vbak~vbeln vbap~posnr
INTO CORRESPONDING FIELDS OF TABLE it_vbpos
FROM vbak INNER JOIN vbap
ON vbak~mandt = vbap~mandt
AND vbak~vbeln = vbap~vbeln
WHERE vbap~werks IN s_werks
AND vbak~vdatu IN s_vdatu
AND vbak~vkorg in (cns_vkorg,cns_vkorg_US)
AND vbap~oid_ship IN s_kunnr
AND vbak~kunnr IN s_kunag
AND vbak~auart IN s_auart
AND ( vbak~auart = 'ZWP' or vbak~auart = 'ZIF' or
vbak~auart = 'ZCT' or vbak~auart = 'ZTM' or
vbak~auart = 'ZOIL' ).
IF SY-SUBRC = 0.
SELECT vgbel vgpos vbeln posnr FROM lips
INTO CORRESPONDING FIELDS OF TABLE it_vbpos_temp
FOR ALL ENTRIES IN it_vbpos
WHERE vgbel = it_vbpos-vbeln
AND vgpos = it_vbpos-posnr
%_hints oracle 'index ("LIPS" "LIPS~Z01")'.
SORT it_vbpos_temp by vgbel vgpos.
LOOP AT it_vbpos.
READ TABLE it_vbpos_temp
WITH KEY vgbel = it_vbpos-vbeln vgpos = it_vbpos-posnr
BINARY SEARCH.
IF SY-SUBRC = 0.
it_vbpos-vbdel = it_vbpos_temp-vbeln.
it_vbpos-psdel = it_vbpos_temp-posnr.
modify it_vbpos.
ENDIF.
ENDLOOP.
ENDIF.
WHEN p_rdos.
SELECT k~vbeln p~posnr k~kunnr AS kunag k~audat k~auart p~werks k~vgbel
INTO CORRESPONDING FIELDS OF TABLE it_vbpos
FROM vbak AS k INNER JOIN vbap AS p ON k~vbeln = p~vbeln
WHERE p~werks IN s_werks AND k~vdatu IN s_vdatu AND
k~vkorg in (cns_vkorg,cns_vkorg_US) AND "DEVK903521
k~vgbel EQ p_vgbel AND
k~kunnr IN s_kunag AND k~auart IN s_auart AND
p~oid_ship IN s_kunnr.
ENDCASE.
Determine if delivery has been billed out, if not can create PF Invoice - CHANGED
LOOP AT it_vbpos INTO wa_vbpos.
Check Ship-to in
SELECT SINGLE kunnr INTO wa_vbpos-kunsh FROM vbpa
WHERE parvw EQ cns_parsh AND vbeln EQ wa_vbpos-vbeln.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
Check for Bill-to
select single kunnr into wa_vbpos-kunre from vbpa
where parvw eq cns_parre and vbeln eq wa_vbpos-vbeln
and kunnr in s_kunre.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
Get Partner Texts
SELECT SINGLE name1 INTO wa_vbpos-name1_ag FROM kna1
WHERE kunnr EQ wa_vbpos-kunag.
SELECT SINGLE name1 INTO wa_vbpos-name1_sh FROM kna1
WHERE kunnr EQ wa_vbpos-kunsh.
SELECT SINGLE name1 INTO wa_vbpos-name1_re FROM kna1
WHERE kunnr EQ wa_vbpos-kunre.
CASE 'X'.
WHEN p_rdff.
IF p_delvd = 'X'.
optimized for performance reasons i.e. time-out
Check if delivery has been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc EQ 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ELSEIF p_billed = 'X'.
Check if delivery hasn't been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ENDIF.
WHEN p_rdos.
IF p_delvd = 'X'.
Check if order has been billed out
SELECT SINGLE * FROM vbrp
WHERE vbeln EQ wa_vbpos-vbeln AND
vgpos EQ wa_vbpos-posnr.
IF sy-subrc EQ 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
ELSEIF p_billed = 'X'.
Check if delivery hasn't been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON pvbeln = kvbeln
WHERE pvgtyp EQ cns_vgtyp AND pvgbel EQ wa_vbpos-vbdel AND
pvgpos EQ wa_vbpos-psdel AND kvbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ENDIF.
ENDCASE.
MOVE-CORRESPONDING wa_vbpos TO wa_report.
APPEND wa_report TO it_report.
MODIFY it_vbpos FROM wa_vbpos.
ENDLOOP.
if 'onsite field summary', then process by release sales orders
IF p_rdos = 'X'.
sort it_report by vbeln.
delete adjacent duplicates from it_report comparing vbeln.
else.
SORT it_report BY werks name1_ag name1_sh vbeln.
DELETE ADJACENT DUPLICATES FROM it_report.
endif.
SORT it_report BY name1_sh werks name1_ag vbeln.
ENDFORM. " read_report
*& Form process_vf01
Call transaction VF01 and fill screen table with order values
FORM process_vf01.
DATA: ln_index(2) TYPE n,
lc_field(20) TYPE c,
lc_fkart TYPE vbrk-fkart,
li_lines TYPE i,
lc_msgtxt(99) TYPE c,
lwa_bdcoptions TYPE ctu_params,
lwa_mess LIKE LINE OF it_bdcmess.
REFRESH: it_bdcmess.
lwa_bdcoptions-dismode = cns_mode.
lwa_bdcoptions-updmode = cns_upd.
CASE 'X'.
WHEN p_rdff.
lc_fkart = cns_fkff.
WHEN p_rdos.
lc_fkart = cns_fkos.
ENDCASE.
REFRESH: bdc_tab.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
' ' 'BDC_CURSOR' 'RV60A-FKART',
' ' 'RV60A-FKART' lc_fkart,
' ' 'BDC_OKCODE' '/00'.
LOOP AT it_vbeln INTO wa_vbeln.
ln_index = sy-tabix.
Up to the second delivery of the BDC add the Delivery to the screen, after that click the More Documents for every entry. logic changed for DEVK902353
CASE ln_index.
WHEN 1.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
WHEN 2 OR 3.
IF p_rdos 'X'.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' 'FKAN'..
ELSE.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
ENDIF.
WHEN OTHERS.
If p_rdos 'X'.
CONCATENATE 'KOMFK-VBELN' '(2)' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' 'FKAN'.
endif.
ENDCASE.
ENDLOOP.
VF01 will go to a different screen if only one line selected
DESCRIBE TABLE it_vbeln LINES li_lines.
IF li_lines EQ 1.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0104',
' ' 'BDC_OKCODE' '=SICH'.
ELSE.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' '=SICH'.
ENDIF.
CALL TRANSACTION 'VF01' USING bdc_tab OPTIONS FROM lwa_bdcoptions
MESSAGES INTO it_bdcmess.
WRITE: / 'BDC Messages:'.
SKIP.
LOOP AT it_bdcmess INTO lwa_mess.
CALL FUNCTION 'RH_MESSAGE_GET'
EXPORTING
arbgb = 'VF'
msgnr = lwa_mess-msgnr
msgv1 = lwa_mess-msgv1
msgv2 = lwa_mess-msgv2
msgv3 = lwa_mess-msgv3
msgv4 = lwa_mess-msgv4
IMPORTING
msgtext = lc_msgtxt
EXCEPTIONS
message_not_found = 1
OTHERS = 2.
WRITE: /5 lc_msgtxt.
ENDLOOP.
ENDFORM. " process_vf01
form update_bdc *
subroutine to add the data to the bdc table for trans. vf01 *
FORM update_bdc USING dynpro field content.
CLEAR bdc_tab.
IF dynpro EQ 'X'.
bdc_tab-program = field.
bdc_tab-dynpro = content.
bdc_tab-dynbegin = 'X'.
ELSE.
bdc_tab-fnam = field.
bdc_tab-fval = content.
ENDIF.
APPEND bdc_tab.
ENDFORM. "UPDATE_BDC
*& Form show_report
Report to Display Available Orders on Screen
FORM show_report .
DATA: l_idx TYPE i.
WRITE: / 'Available Orders/Deliveries for Plant:'.
LOOP AT s_werks.
WRITE: s_werks-low.
ENDLOOP.
SKIP.
FORMAT INTENSIFIED ON COLOR COL_HEADING.
WRITE: /5 text-h01, text-h02.
CASE 'X'.
WHEN p_rdff.
WRITE: text-h06.
ENDCASE.
WRITE: text-h03, text-h04, text-h05, text-h07,
/ sy-uline.
FORMAT INTENSIFIED OFF COLOR OFF.
l_idx = 0.
LOOP AT it_report INTO wa_report.
IF l_idx EQ 0.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
l_idx = 1.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
l_idx = 0.
ENDIF.
WRITE: / wa_report-mark AS CHECKBOX,
wa_report-auart UNDER text-h01,
wa_report-vbeln UNDER text-h02.
CASE 'X'.
WHEN p_rdff.
WRITE: wa_report-vbdel UNDER text-h06.
ENDCASE.
WRITE: wa_report-audat UNDER text-h03,
wa_report-name1_ag UNDER text-h04,
wa_report-name1_sh UNDER text-h05,
wa_report-name1_re under text-h07.
HIDE: wa_report-mark, wa_report-vbeln, wa_report-vbdel.
ENDLOOP.
ENDFORM. " show_report
Thanks for your kind help.
Aarav.Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM -
Hi Experts,
I wanted to know if we can read selection conditions maintained in DTP in the start routine using any custom code or using any standard function module.
Any help will be appreciated.
Thanks,Hi,
You can do that by writing code to select data from this table RSBKDATAPAKSEL
Hope this helps
TRUC -
How to set request number of info package using start routine
Hi All,
I have a specific requirement in which I need to upload only selective request nos from PSA to DSO.
Any one can suggest how to set request number of info package using start routine or any other mode so that only selective request should proceed using DTP?
Thanks
SangitaYou'll probably want to do this in a start routine. It is probably not advisable to hard-code the technical name of the InfoPak. They seem to remain the same upon transport, unlike DTP technical names which are locally generated.
I would do a SQL select like this in a start routine, and then filter based on the results of the SQL. You'll probably want to sort the results by date and time, both descending. Or do a MAX in the SQL.
Please let me know if this isn't clear.
select q~rnr q~logdpid q~tdatum q~tuzeit
from rsreqdone as q
inner join rsldpio as p
on p~logdpid = q~logdpid
where p~objvers = 'A'
and p~logdpid like 'ZPAK%'
and p~source = 'your data source' -
Restricting data in cube using start routine
Hi,
Can anyone help me with my scenariou2026.I am trying to restrict the absence data being loaded into the cube where the absence is less than or equal to twenty.
Firstly I put in a start routine in the update rules against actual time.
DELETER DATA_PACKAGE WHERE DUR_ACTUAL GT 20
But this didnu2019t work.
Secondly I put this code in the change routine for the key figure actual time
IF RESULT GT 20.
RETURNCODE = 1.
ELSE.
RETURNCODE = 0.
ENDIF.
But all the actual time fields were set to 0.
Can anyone please help with the correct code.
Thanks
ForhadIt is hard to say without debugging your code, and inspecting the input package. Maybe you just need quotes around your values, or something simple like that.
But did you know that it is faster to put a filter in a DTP? Using a filter, you're pushing the criteria down to the SQL WHERE clause, and limiting the amount of data.
And, you're eliminating the need for ABAP.
Sorry, if you're not on BI7, disregard, because you don't have DTPs.
Edited by: Jerry Coleman on Jan 29, 2009 10:05 AM
Maybe you are looking for
-
Why will itunes not install on my macbook pro
Why will I-tunes not work on my brand new macbook pro?
-
Problems upgrading ASA 5505 memory
I am trying to get experience with 8.4 code on my 5505. I purchased a Cisco 512MB memory upgrade and installed it. It booted up once and I thought I was ok. I then looked down and noticed that all lights were blinking on the front panel and I had
-
kernel panic error, suspect it is hardware but not sure if its ram, hd, etc. Can anyone analyze & determine from the following log, thanks in advance. nterval Since Last Panic Report: 53785 sec Panics Since Last Report: 8 Anonymous UUID:
-
After download itunes installation began in windowx xp near the end of the installation the message says: it was not possible to write the value to the key Software / Classes / .mpg / OpenWithList / iTunes / .exe. Already reinstalled 3 times and alwa
-
Adjusting the width of a website
I notice that my website (listed below) has borders and appears much thinner than other web sites. I want to utilize ALL the space possible. What is the best width setting so that my website appears to take up the full screen (like amazon's). Is this