DTS 2000 Short date error in Windows 7 (64 bit)

When using the DTS 2000 Package Designer in 2008 SQL Server Management Studio in Windows 7 (64 bit),
and when trying to use the Build Query functionality, I get the following error message:
An unexpected error occurred.
[MS Visual Database Tools] - Short date
I don't get this error on my machine running Windows XP. The regional settings on both machines are the same.

Hi Everyone,
I know this is a very old thread. But it came up as the first hit in Google when I searched the error message.
I still have the requirement to update an old DTS package that has been migrated to SQL Server 2008 R2 and couldn't find a solution anywhere.
I didn't want to experiment with client tools on my Database Server so here is what I did on my Windows 7 64 bit machine.
I installed Microsoft Windows Virtual PC and then installed Windows XP Mode as a virtual machine.
Then I installed the following stuff in the virtual XP machine.
SQL Management Studio 2008 tools. Of course I needed to install the SQL 2005 backward compatibility stuff as described elsewhere and quite a few other prerequisites that the management studio installer nicely pointed out to me. (You
will probably also need SQL 2000 Client Tools and SQL 2000 SP4)
Once that was all in place I no longer received the "Short Date" error message and I could update my old DTS packages.
I can even run Server Management Studio as a XP Mode Application directly in Windows 7 and it looks just like any other native application.
I have told my boss years ago that this DTS stuff is all hanging on by a thread. I'll also tell him the thread just got a bit thinner :)
Hope this helps someone else stuck in this position.
David

Similar Messages

"Unable to load data" error after Windows update

Hi all,
I've been maintaining a LightSwitch desktop app for a couple of years now. The app runs on a server and several client machines access it. Sometime in the last few months, any client that has Windows Update enabled has failed to load data. Instead
it shows red crosses where the data should be and the tooltip, "Unable to load data. Please check your connection and try loading again."
Other clients that don't have updates enabled are fine. Has anyone else run into this issue? Does anyone know how to resolve it?
Thanks,
Liam

Hi Angie,
Thanks for your reply. I've enabled diagnostics as described. Here's what I find.
When I load my LightSwitch screen, I get the following entry highlighted red in Fiddler:
GET http://127.0.0.1:6853/callback.json?_=1377245349573
502 Fiddler - Connection Failed (text/html)
GET http://127.0.0.1:6853/callback.json?_=1377245349573 HTTP/1.1
Host: 127.0.0.1:6853
Proxy-Connection: keep-alive
Accept: application/json, text/javascript, */*; q=0.01
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/29.0.1547.57 Safari/537.36
Accept-Encoding: gzip,deflate,sdch
Accept-Language: en-GB,en;q=0.8
HTTP/1.1 502 Fiddler - Connection Failed
Date: Fri, 23 Aug 2013 08:09:10 GMT
Content-Type: text/html; charset=UTF-8
Connection: close
Timestamp: 09:09:10.584
[Fiddler] The socket connection to 127.0.0.1 failed. <br />ErrorCode: 10061. <br />No connection could be made because the target machine actively refused it 127.0.0.1:6853
After that, I see a long list of each of the queries LightSwitch is calling for all the elements on the screen. Each one contains the following error:
HTTP/1.1 200 OK
Cache-Control: no-cache
Pragma: no-cache
Content-Length: 747
Content-Type: application/msbin1
Expires: -1
Server: Microsoft-IIS/7.5
X-AspNet-Version: 4.0.30319
X-Powered-By: ASP.NET
Date: Fri, 23 Aug 2013 08:10:38 GMT
@Fault5http://schemas.microsoft.com/ws/2005/05/envelope/none@Code@Value�Sender@Reason@Textxmllang�en-GB��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@Detail@DomainServiceFaultDomainServices i)http://www.w3.org/2001/XMLSchema-instance@ ErrorCode�@ErrorMessage��<?xml version="1.0" encoding="utf-16"?><ExceptionInfo><Message>User does not have access to the invoked operation. Your session may have timed out. Please restart the application. Operation name: 'HSEComments_All'.</Message></ExceptionInfo>@IsDomainException�
Can you help in interpreting these?
Thanks,
Liam

Acrobat Reader XI jpeg 2000 insufficient data error

Good morning,
We've been generating pdf reports with a third party control for about 4 years now. With the release of Reader 10.1.4 (IIRC) our clients started having problems reading the pdfs and we confirmed the behavior. Initially, it seemed that version 11 of the reader fixed this issue, but once again our clients are still having problems. They are getting the same insufficient data for image error that was endemic with the older version of the reader. I've been able to open our reports without problems in other pdf readers, just not Acrobat Reader. We haven't changed our image compression or report generation controls or code, so I'm wondering if the problem, whatever it is, still exists in this new version.
I cannot post one of these reports on a public forum, but I could send it along, most likely with an NDA, to a responsible party at Adobe for investigation.
Thanks,
Matthew

Without an actual PDF the demonstrates the problem, we can't comment...
I can say that previous issues were resolved by working around invalid PDF/JPEG2000 constructs found in documents produced by certain PDF production tools. Updating those tools will also correct the problem.

Unable to install. The stub received ve bad data error

how to fix error unable to install. The stub received ve bad data error in windows 8 operating system while installing HP printer driver

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
Please click on the below shown link to troubleshoot the issue
http://answers.microsoft.com/en-us/windows/forum/windows8_1-performance/the-stub-received-bad-data-e...
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Error -2000 necessary data reference could not be resolved-- HELP!!!

So, I work in a nurse's office at a medical school editing video on an iMac 2.33 GHx Intel Core 2 Duo with 3GB 667 MHz DDR2 SDRAM. Mine is the only mac in the office, the rest of the secretaries, nurses, and grad students are on windows XP.
My job is basically to edit videos (color correct, blur faces of patients' relatives, etc) from a study they did, and export the videos to a DVD (as a data disk, not a DVD with menus) so they can show them to each other and various committees on their windows machines.
For the longest time, this went off without a hitch, but most recently, I tried burning some .mov files to disk, and whenever they play on any machine (windows xp) we get "Error -2000 necessary data reference could not be resolved." I re-burned the disks, and now, they are selective! They play on some of the office computers, but not all... including the target machine where they will ultimately be screened for a committee... even on the 2nd batch of disks, that error is still present...
I know about video editing, and to some degree disk burning (I used the "New-->burn folder" option to create the data disk, burning them at 2x speed for reliability). But I don't know enough about computers to figure out what this error means, or why these disks won't work!! Somebody please help!
(and you can save the sales pitch... I'm a mac user through and through, and there is no way in heck my office will ever have enough money or motivation to switch over)
Thanks for your help!!

I wont address the problem but that you should have your videos. Dont you still have them on your camera? If not, just get it from your friend. Btw, do this the next tíme around ... Whenever you plug in the camera and your iPhoto/pic Application opens up, BEFORE you have iPhoto import them, use Finder to copy the photos over to your HDD or an external drive. This is so that YOU always have the originals BEFORE your pic Application does.

Kernel data error occuring while installation of windows 10

i have downloaded windows 10 but during its installation my laptop's screen turn blue and shows "kernel data inpage error" and says that laptop needs a restart...and when my laptop restarts its shows no reboot device found and no operating system is found in your hardrive....then i have to press my laptops power button and shut it down and then again turn on my laptop.....three times i have tried installing windows 10 and each time this error has occured........please someone answer me that what is this kernel inpage error?....what is this reboot device?....and what should i do to fix this problem?

Hi,
While doing a fresh install of Windows server 2012 R2 on a machine I am getting error as
"Windows could not update the computer's boot configuration. Installation cannot proceed."
I have even tried to delete all the partitions and then tried to do the installation but similar error pop up after complete installation.
Even I tried to run bootrec with /fixmbr /fixboot but still no resort.
Any thoughts how to fix the issue.
Thanks in advance.
you need a fairly modern rig with lots of RAM to run Server 2012 R2
Corsair Carbide 300R with window
Corsair TX850V2 12V1 70A
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 x64 Professional
LG WH14NS40 14X Blu-Ray Writer BDXL 128GB
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M

I am using Windows 8.1 i have an External Hard Disk and one drive is now inaccessible due to sudden power failure few days ago. Now it shows "Data error (Cyclic redundancy check)". I want all my important files and Pics. How ?

Hi,
I am using Windows 8.1
I have an External Hard Disk i have partitioned it to 4 parts.
One drive is now inaccessible due to sudden power failure while listening Music from that drive few days ago.
Now it shows "Data error (Cyclic redundancy check)".
I tried all the procedures provided here like
chkdsk /f, diskpart, rescan etc
but no result :( (i mean all processes failed. They could not detect the drive).
Please help me to get those data, pictures and project files.
thank you

Then why aren't you posting this in the Windows 8 forums found @
http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w8itpro
This is a Windows 7 forum for discussion about Windows 7.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Data error (cyclic redundancy check) when installing windows xp..

hi guys.. i'm new here.. just switched to macdom a few days ago but unfortunately, i have been having problems trying to install windows xp with sp 2 on my system using boot camp. everytime i install it, i get to the setup screen ("39 minutes till setup rah rah rah", "windows xp is awesome because it has this cool interface etc... rah rah rah") and then the error of doom comes out -_-
the error given is;
an eror has been encountered that prevents setup from continuing
one of the components that windows needs to continue setup could not be installed
data error (cyclic redundancy check)
if you are installing from a cd, there might be a problem with the disc; try cleaning the disc or using another disc
if you are installing from the network, it is possible that not all of the files were copied correctly to your disk drive. run the disk checking utility on your installation drive from the recovery console and start setup again
press ok to view the setup log file
i have tried numerous times without fail and it is getting to my head.. gah.. if someone could help me out, it would be massive and i would sell my soul to you! (kidding).. thanks for reading!
p/s: my setup is;
Macbook
2.1ghz
1gb ram
120gb hard disk
dvd/cd-rw combo drive
the basic setup pretty much.. again.. any help would be greatly appreciated. thank you so much guys!

I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?

Adobe photoshop cc 2014 crashes at startup / GC driver up to date (nvidia 740M) / windows 8 / uninstalled software reinstalled disconnected creative cloud and reconnect / nothing solved /error report ready to send

Help
in this for 3 and a half hours now and really nervous bout it.
adobe photoshop cc 2014 crashes at startup /
solely photoshop : lightroom illustrator indesign okay /
GC driver up to date (nvidia 740M) /
windows 8 /
uninstalled software and reinstalled from creative cloud app /
disconnected profil creative cloud and reconnect /
moved preferences out /
I just have installed a fresh OS windows 8 and nothing but the adobe apps /
nothing solved /error report ready to send
(edit)
funny cannot send the image of the errors because i DO NOT have a photoshop working version !)
(did the screen copy, exported in jpeg srgb from illustrator)

exported the error log from lightroom still not working as it seems like the file (it's a screenshot) is more than a 8mo size file !
i ignored i was using a 8k screen till now
please help
Cheers,
Arnaud.

Short Dump error while loading data from R/3 to ODS

Hello,
while trying to load data into the ODS from R/3 I get the following short dump error message. How do I carry out step 1 in the below procedure. Where do i find the Activate Function. And idea?
Thanks,
SD
                                                                                Diagnosis
Form routine CONVERT_ITAB_RFC is incorrect in transfer program
     GP4C0LOLZ6OQ70V8JR365GWNW3K .
System Response
The IDoc processing was terminated and indicated as incorrect. The IDoc
     can be reimported at any time.
Procedure
1. Go to the transfer rule maintenance for your InfoSource
         ZFIN_TR_FLQITEM_FI and the source system DA_M_10 and regenerate the
         transfer program using the function Activate. Remove possible syntax
         errors on the basis of your conversion routines.
2. Restart the processing of this IDoc.
3. If the error occurs again search for SAPNet R/3 notes, and create a
        problem message if necessary.
Edited by: Sebastian D'Souza on Jan 13, 2009 3:22 PM

Hi.......
Goto RSA1>> then to source system tab (on left side) >> double click on the desired source system...........Then on the right side you have the Datasource tree..........there search the datasource and activate.......Also u can Replicate the datasource again.......and activate the Transfer rules using the program : RS_TRANSTRU_ACTIVATE_ALL
After this operation when come back to source system (R/3).........I think the error log line will be disappeared from SM58......... Then repeat the load.........
Also u can try to Activate the infosource once...........in RSA1.........before repeating the load....
Hope this helps......
Regards,
Debjani....

SQL 2000 LINKED SERVER ERROR 7303 WITH SQL 2012 ON WINDOWS SERVER 2012 R2

Hi all,
I have a problem with SQL Server 2012 and a linked server for SQL 2000 database.
System specification:
Windows server 2012 64 bit
SQL SERVER 2012 64 bit
REMOTE SERVER SQL 2000 32 bit
I've installed sql native client 32bit,create a SYSTEM DSN odbc connection with "SQL Server" driver named "MYSERVER".
Create a linked server with the query below in SQL 2012:
EXEC master.dbo.sp_addlinkedserver @server =N'MYSERVER', @srvproduct=N'MYSERVER', @provider=N'MSDASQL', @datasrc =N'MYSERVER', @location=N'System';
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'MySERVER',@useself=N'True',@locallogin=NULL,@rmtuser=NULL,@rmtpassword=NULL
GO
but when i browse the linked server i receved error 7303.

You need 64-bit MSDASQL. It is the bitness of the server you are connecting from that matters. 64-bit executables cannot hook into 32-bit DLL.
However, I suspect that you will not get things to work anyway. At least I have not seen anyone this far who has been able to set up a linked server from SQL 2012 to SQL 2000. I know that when I tried this, the following providers had this result:
SQLNCLI11 - does not support connections to SQL 2000.
SQLNCLI10 - failed with some obscure message that I don't recall.
SQLNCLI - Don't recall that the problem was here.
SQLOLEDB - SQLOLEDB is always replaced with the most recent version of SQLNCLI, so this fails because of lack of support.
I don't think I got through all version of the ODBC drivers, though.
Erland Sommarskog, SQL Server MVP, [email protected]

Windows Data Error (cyclic redundancy check) on USBSTOR - Exclamation Point

Hi, folks, hooking my friends' video iPod to a Windows XP PC that has all of the latest patches, and when I go into the Device Manager, the iPod is listed with an exclamation point...says there is an error with the device driver (USBSTOR)...and when I try to update, it gives me a Data Error (cyclic redundancy check). Any ideas?
dell Windows XP Pro

I guess there is a problem with your XP CD, probably scratched or did not burn successfully. Have you tried it with another installation cd?

Short Dump Error While Data load

Hi Experts,
Data load to an ODS in production server has been failed because of Short dump error. The error message shows " OBJECTS_OBJREF_NOT_ASSIGNED ".
Request you to please help me out with a solution ..
Regards,
Vijay

Hi Vijay,
follow the steps below (May Help you)
Goto Monitor screen>Status Tab> using the wizard or the menu path >Environment -> Short dump> In the warehouse
Select the Error and double click
Analyse the error from the message.
1.-->Go to Monitor
-->Transactional RFC
-->In the Warehouse
-->Execute
-->EDIT
-->Execute LUW
Refresh the Transactional RFC screen and go to the Data Target(s) which have failed and see the status of the Request-->Now it should be green.
2.In some cases the above process will not work (where the Bad requests still exists after the above procedure).
In that case we need to go to the Data Targets and need to delete the bad requests and do the update again
Regards,
BH

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
Google Chrome is a problem:
if you use Chrome's own PDF viewer, the results are unpredictable.
if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version. Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
My suggestion; use a different browser!

I attempted to download ITunes up date 11.1.4 and it would not install. Got two error messages, error 7 windows error 126 an "privileges. Also meesage that msvcr80.dll was missing. Would like help.

I attempted to download itunes up date 11.1.4 and it would not install. Received the following error messages: error 7 windows error 126 and "privileges. Did uninstall itunes , but could not ger new download. What do you suggest?

Hello, Jack.
You will find this article helpful in troubleshooting the error that you are receiving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Regards,
Jason H.

DTS 2000 Short date error in Windows 7 (64 bit)

Similar Messages

Maybe you are looking for