DUMP Applications for E-Recruiting
Dear
I have an issue with register of external candidate.
I have checked the log generated in the T.code ST22 and this genera error in the line 108 of the following class.
CL_HRASR00_CREATE_PERS_FILE=>CREATE_APPEND_PERS_FILE
101
102 * Get the pernr
103 IF attributes-application = 'PA' .
104 pernr = attributes-object_key.
105 process = attributes-process.
106 ENDIF.
107
>>>>> ASSERT pernr IS NOT INITIAL AND process IS NOT INITIAL.
109
110 * Now get an instance of dpf
What is the posible cause of this error?
Thanks
Regards
Yes. The dump generate is caused by application of EREC
Regards
Similar Messages
-
Re: New WD Application in E-Recruitment
I have added New WD Application in E-Recruitment through configuration in SPRO. But when i click on it, goes for dump.
says "CX_WD_CONTROLLER_NOTEXIST". Any Idea on where i am going wrong.Hi Thomas,
Thanks for your reply & support.
I fixed it. I haven't implemented one of the standard interface in my custom application. It is working fine now.
Edited by: candy on Sep 29, 2009 3:25 AM -
where to find the best application for cleaning out my MacBook Air with OS X 10.7.5? I've been using MacKeeper but believe it's slowing down my laptop considerable. Thank you.
How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it. -
Cannot create a dump file for a process
Hi fellows,
I have a problem creating a dump file for an application. The application consists of C++ and C# dlls. It runs in Windows 7 64bit environment.
I constantly receive the following error:
ERROR_PARTIAL_COPY: Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
and only a part of the dump is created ~ 400 MB (should be ~900 MB) although there is enough space on the disk drive.
I have tried the following options:
- Task Manager -> Create Dump File
- windbg (64bit version): .dump /a
This happens only on two machines and not on all the rest (~20 more).
All of them are equipped with Windows 7 64bit, the application is build in 64bit
Note that if I use the option /mA when calling .dump it creates the dump without errors. From the MSDN documentation:
The /mA option is equivalent to /ma except that it ignores any failure to read inaccessable memory and continues generating the minidump.
My questions are:
1) What can be the case when the memory being read is inaccessable
2) Why does it fail creating the dump file for only 2 machinesOkay, after reading the post here are the results I got:
0:013> !vprot 0x800000000
BaseAddress: 0000000800000000
AllocationBase: 0000000800000000
AllocationProtect: 00000004 PAGE_READWRITE
RegionSize: 0000000200000000
State: 00001000 MEM_COMMIT
Protect: 00000004 PAGE_READWRITE
Type: 00040000 MEM_MAPPED
0:013> !mapped_file 0x0000000800000000
No information found for 0000000800000000: error 161
1) windbg is unable to tell me which the mapped file is
2) I have tried it several times and strangely always the problematic adress is 0x800000000 ... isn`t that weird ? -
Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search on the App Store by operating system (if this is even possible). I currently have a MacBook running OS10.6.8. If you can recommend an app, please post the URL. Would appreciate any helpful suggestions....
<Email Edited By Host>Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Best application for cleaning my files
Best application for cleaning my files?
How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; make them independent of each other. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the Software Update preference pane, you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis. This is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, this stuff is useless, or worse than useless.
The more actively promoted the product, the more likely it is to be garbage. The most extreme example is the “MacKeeper” scam.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for — such as creating, communicating, and playing — and does not modify the way other software works. Use your computer; don't fuss with it.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve.
The free anti-malware application ClamXav is not crap, and although it’s not routinely needed, it may be useful in some environments, such as a mixed Mac-Windows enterprise network.
4. Beware of trojans. A trojan is malicious software (“malware”) that the user is duped into installing voluntarily. Such attacks were rare on the Mac platform until sometime in 2011, but are now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must be acquired directly from the developer. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from a web page without your having requested it should go straight into the Trash. A website that claims you have a “virus,” or that anything else is wrong with your computer, is rogue.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most users don't.
5. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem. While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage consumption and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as the free application OmniDiskSweeper to explore your volume and find out what's taking up the most space. Move rarely-used large files to secondary storage.
6. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it. -
BI applications for EBS R12 release in OBIA 7963 release
Hi all,
Can anybody list the BI applications for EBS R12 release which supported in OBIA 7.9.6.3?
Thanks
RamAre you referring to the EBS functional modules? BI Apps has a numbe of product families (Financial Analytics, HR Analytics, CRM Analytics..etc) that can source from EBS as well as other ERP systems (PeopleSoft, Siebel, JDEdwards..etc). If you are looking for the functional areas, I would suggest asking your Oracle rep for the "Product Guides" for the package you need (e.g Financial Analytics, HR Analytics..etc). Also there is a "Content Guide" you can find on metalink that lists the OOTB reports, dashboards, and Metadata content (RPD attributes).
Here is the list of DAC subject areas under the vanilla EBS container..it may help for now until you have the other docs:
Employee Expenses
Enterprise Sales - Backlogs
Enterprise Sales - Booking Lines & Order Lines
Enterprise Sales - Booking Lines & Schedule Lines
Enterprise Sales - Customer Status History
Enterprise Sales - Cycle Lines
Enterprise Sales - Invoice Lines
Enterprise Sales - Order Lines
Enterprise Sales - Pick Lines
Enterprise Sales - Schedule Lines
Financials - Budget
Financials - Cost of Goods Sold
Financials - General Ledger
Financials - General Ledger - US Federal
Financials - Group Account Number Clean Up
Financials - Payables
Financials - Receivables
Financials - Revenue
HR - Absence Event
HR - Flex Prereq
HR - Generate Flexfield Data
HR - Learning Management
HR - Payroll
HR - Recruitment
HR - Workforce
Projects
Projects - Finance Integration
Supply Chain - AP Invoices
Supply Chain - BOM Items
Supply Chain - Inventory Balance
Supply Chain - Inventory Transactions
Supply Chain - Purchase Cycle Lines
Supply Chain - Purchase Order
Supply Chain - Purchase Receipts
Supply Chain - Purchase Requisitions
If this was helpful please mark the response as helpful or correct. -
Look for e-recruiting install guide
I cannot find the install guide for e-recruiting at SMP.
I see that ehp3 for ERP has e-recruiting.
Is ehp3 the only way to have e-recruiting?
Thanks!Hi,
>
> 1) In order to bring in e--recruiting , can I apply ehp3 directly without applying any e-recruiting add-on (i.e. baseline) first?
>
Depends on which system you want to install E-Recruiting, If it is an ECC system then by default when you will install ECC system then it will come at certain package level and then you can upgrade it to EHP3.
If you install it on netweaver system then you can directly install it on EHP3 level.
> 2) You mentioned it's an add-on on ECC/NW. Does it also have some files (e.g. *.sca) to be deployed on EP?
>
Yes, you need to deploy certain packages on Portal as well depend upon for which functionality you want to use E-Recruiting application.
Check below link:
https://websmp108.sap-ag.de/~sapidp/011000358700003087572006E
> 3) In terms of architecture, are e-recruiting, e-sourcing, e-service, ecommerce and e-market are similar?
>
In order to look on architecture of e-recruiting, please check below links:
https://websmp206.sap-ag.de/~sapidb/012006153200000893642007E/Managing_External_Recruiting_ehp3.pdf
http://wiki.sdn.sap.com/wiki/display/ERPHCM/SAP%20E-Recruiting
Thanks
Sunny
Edited by: Sunny Pahuja on Sep 26, 2010 3:13 PM -
Possible (and secure) architectures for E-Recruitment Web Enabled???
Hello,
i need informations about posible (and secure) architecture solutions for E-Recruitment Web Enabled.
I found one basic exsample in the E-Recruiting system architecture guide, but it is a exsample from 2003.
do someone use E-Recruiting web enabled and in what for a topology?
regards
chrisHellow Christian,
Successful e-recruiting relies on strong long-term relationships with both current and potential employees u2013 and on the ability to locate appropriate positions for talented individuals from within and outside the organization. The SAP E-Recruiting application offers innovative support for talent relationship management, as well as traditional central recruiting functions.
SAP E-Recruiting, a fully Web-enabled, end-to-end recruiting solution, accelerates and streamlines the recruiting process with a comprehensive strategy that that enables your company to build up and draw from a qualified, global pool of internal and external talent. Recruiters can take advantage of this talent pool to quickly find the staff they need, while collaborating closely with hiring managers throughout the hiring process.
Applicant tracking and reporting functions help organize the processing of job applications and monitor the effectiveness of the recruiting organization. A collaboration platform links SAP E-Recruiting to external systems such as job boards, recruiting service providers, and your company's internal systems.
Please check this links for reference
http://www.sap.com/solutions/business-suite/erp/hcm/featuresfunctions/index.epx
http://www.sap.com/solutions/business-suite/erp/erecruiting.epx
Thank you,
Shyam -
How to create an infotype for E-Recruitment
Please tell me how to create an ER(E-Recruitment) Infotype. This infotype will be mapped to BSP application.
hello arvind,
if you really create a new infotype for e-recruiting you use the standard tools like for hr master data / pd infotypes. These tools create screens but they are useless. The reason is that the tools are build for SAP HCM and noone really cares about e-recruiting so there is no option like "it's for e-recruiting do not create screens". If you do not want to have any maintenance issue you can just delete the screens you will never miss them.
If you look for a BSP version of the screen generation I have to tell you that such thing is not existing you will have to build all screens on your own.
Whenever I can I try to use the CI Includes of the E-recruiting Infotypes to store additional data or if you need additional candidate fields which are existing in the business partner (e.g. nationality) but are not maped i widen the bp data mapping.
If all these things are not possible you can add your own infotype which has some pros (e.g. getting the infotype framework for free) and cons (e.g. datatype/length restriction for fields) or you make your own database table where you have all freedom you like. If you need to enlarge the data model for Candidate / Candidacy information and do not plan to run statistics on this data using the Application Wizard Questionaire might be a solution, too.
Best Rgds.
Roman -
Application for the post of an ORACLE DBA
=================================================================
============
ARUNKUMAR RAGHAVAN MSc,BEd,PGDMCH,(MBA)
=================================================================
============
CURRICULUM VITAE
Covering letter
From
Arunkumar.R, email : [email protected],
[email protected]
No 16 /9 Nagendra nagar,
Velachery main road, checkpost,
Near jaya hospital,
Chennai -600 042.
Respected Sir / Madam,
SUB : Application for the post of
ORACLE DBA / DBO - Reg
I wish to submit the following few lines for your kind
consideration.
I feel more comfortable and satisfactory with this type of job
as
I am keen to serve as an employee of your esteemed organization,
which has an intellectually stimulating and emotionally
satisfying environment.
I assure that, I will do my duty to the fullest satisfaction of
my
higher officials, colleagues and to the best of my knowledge and
belief.
I am attaching my CV, first 2 pages of my first book –“ORACLE
ARCHITECTURE MADE EASY”, and a newsletter about Penta Media
Graphics Ltd, my present employer.
Expecting the favour of your earliest reply.
Thanking you with respectful regard,
Yours truly,
(ARUNKUMAR.R)
=================================================================
============
CAREER OBJECTIVE
1. To be a dependable ORACLE DBA and to deploy an
efficient DATA WAREHOUSE and DATA MART.
2. To write unique books on ORACLE DBA and DATA WAREHOUSING
for enthusiastic learning
Experience summary
q Five years and six months of overall experience in
Software Industry.
q Over 24 months of work experience in the administering,
and maintaining the Oracle Database of sizes 3 GB
q Training and authoring books, CBT’s,WBT’s for Oracle DBA
and
Data Warehousing .
Technical skills
Hardware IBM PC, MAC
Operating Systems WINDOWS NT, 95/98/2K, MS-DOS,
LINUX, MAC-OS
RDBMS ORACLE 8I, DBASE, FoxPro,
MSACCESS
Internet Tools HTML, IIS, FrontPage
Responsibilities at PENTAMEDIA GRAPHICS LTD,
(formerly known as PENTFOUR SOFTWARE EXPORTS LTD, SEI-CMM LEVEL
4 COMPANY )
1. Maintaining an "Oracle Pre-Production Database" of size 3 GB.
2. In charge of the CBT's on Data Warehousing & ORACLE
DBA.
3. Installing and upgrading the Oracle server (Oracle 7.3,
Oracle 8.0,
ORACLE 8i,) and application tools.
3. Allocating system storage and planning future storage
requirements
for the database system.
5. Creating Tablespaces for the different group of
projects namely
SOFTWARE, ENGINEERING, MANAGEMENT, and SCHOOL PROJECTS.
6. Creating tables, views and modifying the database
structure, as
necessary, required by Project Leaders and Programmers.
7. Enrolling users and maintaining system security and
controlling and
monitoring user access to the database.
8. Backing up and restoring the database.
Specific Achievements
1. CBT's and WBT's authored (Reference:
www.pentalearn.com )
* Data Warehousing for beginners
* Data Warehousing - Intermediate
* Stepping into ORACLE DBA
* ORACLE DBA - Security
* ORACLE DBA - Backup & Recovery
* Step by Step - ORACLE DBA
* OCP GUIDE - Architecture & Administration
Under Production
* OCP GUIDE - Backup & Recovery
2. Book's authored (Under compilation)
* ORACLE ARCHITECTURE MADE EASY.
* Learn ORACLE DBA in 23 days.
4. Knowledge of documentation and procedures for SEI CMM -
ISO –
QUALITY AUDITS.
4. Academic Project - (Reference: [email protected])
o Title ORACLE QUESTION BANK
o Outline Training software for OCP
(Oracle Certified Professional)
o Period DEC 1998 - JAN 1999
o Software VB 5.0, M.S.ACCESS
5. Awards :
State first & district first in Vivekananda Academy
of cultural
Studies
=================================================================
============
Employment History
1. Company Name : Pentamedia
Graphics ltd
Title : instructional designer
Level : Senior Executive
Specialization : IT/Computer Systems/Software
Function : Professional /
Consultant / Specialist
Industry : Computer / Information
Technology (Software)
Date Joined : 12 oct 1999
Duties : Responsible for CBT’s,
WBT’s on DATA
WAREHOUSING & ORACLE DBA.
project guide for TEAM
members.
Developed 5 training
software.
Maintaining "ORACLE-
PRODUCTION DATABASE"
of size 3GB.
Reason for leaving: working currently
2. Company Name : S.A.International ltd
Title : training officer
Level : Senior Executive
Specialization : IT/Computer Systems/Software
Function : Lecturer / Teacher /
Trainer
Industry : Computer / Information
Technology (Software)
Date Joined : 08 Aug 1997
Date Left : 09 Sep 1999
Duties : At S.A.INTERNATIONAL LTD,(A joint
venture company of ELCOT, GOVT OF TAMILNADU UNDERTAKING)
Responsible for all training programmes.
Project guide
for all college students.
Senior Faculty
for "ORACLE DBA" classes.
Accomplishment : Wrote student guides on office
2000 and on ORACLE DBA
Developed 3 training
software.
Reason for
leaving : To get more
experience on ORACLE DATABASE
MAINTENANCE
3. Company Name : G.K.M.college of
engineering & technology
Title : lecturer
Level : Junior Executive
Specialization : Education
Function : Lecturer / Teacher /
Trainer
Industry : Education
Date Joined : 06 May 1996
Date Left : 09 Aug 1997
Duties : Incharge of computer
science department,
Conducting classes and
all academic
activities.
Accomplishment : Wrote 2 student guides on office
1997 and on
ORACLE DBA.
Reason for
leaving : To get more
experience on ORACLE DBA
Activities
4. Company Name : Infra computers pvt ltd
Title : Asst.technical manager
Level : Junior Executive
Specialization : Training & Development
Function : Executive
Industry : Computer / Information
Technology
Date Joined : 30 Apr 1995
Date Left : 06 Jun 1996
Duties : Monitor the day to day
operations of the
SOFTWARE/HARDWARE SERVICE DEPARTMENT. Monitor the DEPARTMENT
STOCK and cash flow position, Meeting executives for Business
development activities
Accomplishment : Joined the Company since August 1994
as Asst TECHNICAL MANAGER. Promoted to TECHNICAL MANAGER in july
1996.
Reason for
leaving : To study M.B.A
(master business
Administration)
ORACLE DBA SKILLS SELF EVALUATION FORM
Oracle: SQL and PL/SQL Skills:
rate
from
0 = None
through 5 = Guru
Creating and maintaining database objects 3
Store, retrieve, and manipulating data 3
Create PL/SQL blocks of application code 1
Familiarity with PL/SQL packages 1
Familiarity with PL/SQL tables and records 0
Calling PL/SQL functions from within SQL statements 0
Building reusable code
0
Crafting code that automatically adapts to changes
in data structures
0
Writing SQL inside PL/SQL programs
0
Reading and writing operating system files 3
Executing host commands and C programs 0
Issuing database alerts
1
Analyzing memory utilization in your session 2
Debugging and tracing program execution 1
Manipulating raw data and large objects 1
Building your own packages
1
Oracle Enterprise Manager Skills:
rate
from
0 = None
through 5 = Guru
Install Oracle Enterprise Manager 5
Administer and monitor Oracle database environments 5
Oracle Enterprise Manager architecture 3
Setup a console for your own environment 3
Implement job and event based system management 3
Understand the integration of shared administrator
responsibilities
3
Tuning Pack
1
(which comprise Oracle Expert, Tablespace Manager
and SQL Analyze)
Diagnostic Pack
0
(which comprise Oracle Trace and Data Viewer,
Performance Manager,
Capacity Planner,and Top Sessions)
Change Management Pack
0
(which comprise Database Alter, Capture, Diff,
Propagate, Quick Change, and Plan Manager)
Database Administration/ Backup and Recovery Skills:
rate
from
0 = None
through 5 = Guru
Familiarity with Oracle7 database environments 5
Familiarity with Oracle8 database environments 5
Set up, maintain, and troubleshoot database 4
Plan and implement database backup and recovery
strategies
4
Understanding of backup, restore and recovery
operations
4
Oracle8 Recovery Manager 4
Network Administration Skills:
rate from
0 = None
through 5 = Guru
Familiarity with Oracle7 Server 5
Familiarity with Oracle8 Server 5
Familiarity with architecture of Net8 4
Establishing connections between peers 5
Client and a server node using various
naming methods
4
Configuring middle tier systems 0
Familiarity with Names Server
1
Familiarity with Connection Manager
3
Memory, I/O, physical structure and
resource contention 2
Familiarity with dynamic performance views 4
Familiarity with initialization parameters 5
Familiarity with diagnostics and tuning guidelines 3
Data Modeling and Relational Database Design Skills:
Arun's
rate from
0 = None
through 5 = Guru
Knowledge with entity-relationship models 2
Knowledge of normalization and relational
database design
1
Defining business information requirements 3
Creating entity-relationship models
3
Transforming requirements into an initial
database designs
3
Personal Strengths :
INVOLVEMENT alone gives PERFORMANCE. With my
spiritual base &
MOTIVATION, I am confident that I will reach the
pinnacle
in the field of ORACLE DBA. I hope my right thinking &
Hardworking nature will make me successful.
Current Communication Address
Address : 16/9, nagendra nagar, velachery
main road,
near jaya hospital, chennai-42
chennai, 600042 India
Tel [home] : 91-44-2552406
Tel [office]: 91-44-4839854
Tel [mobile]:
Email : [email protected],
[email protected]
Permanent Address
Address : s/o N.Raghavan, laksminayackan
patty(po)
thevaram(via), theni(dt), pin
625530
laxminayakan patty,
625530 India
Tel : 91-4454-54739
Email : [email protected], [email protected]
Personal Particulars
Date of Birth : 05 Aug 1971
Gender : Male
Nationality : India
Marital Status : married
Permanent Residence of : India
Passport Number : T465022
Valid Upto Jan 2005
EDUCATIONAL QUALIFICATION
COURSE UNIVERSITY/BOARD Yr.of PASSING
CLASS & %
S.S.L.C TAMILNADU SECONDARY MAR 1986
FIRST 85.40
H.S.C TAMILNADU HIGER SECONDARY APR 1988
FIRST 68.90
B.Sc MADURAI KAMARAJ UNIVERSITY APR 1991
FIRST 68.63
(PHYSICS) VIVEKANANDA COLLEGE
M.Sc MADURAI KAMARAJ UNIVERSITY APR 1994
FIRST 70.40
(PHYSICS)
BEd MADURAI KAMARAJ UNIVERSITY NOV 1995
SECOND 52.20
TECHNICAL QUALIFICATION
COURSE UNIVERSITY/INSTITUTION Yr.of
PASSING %
PGDMCH# St.JOSEPH'S COLLEGE JULY
1995 59.70
BHARATHIDASAN UNIVERSITY
DPCS* @ DOE & TC.T.S- NCVT TRADE SEP 1996
79.47
(AICTE^ APPROVED)
# POST GRADUATE DIPLOMA IN MICROPROCESSOR AND COMPUTER
HARDWARE
* DATA PREPARATION AND COMPUTER HARDWARE
@ DIRECTORATE OF EMPLOYMENT & TRAINING CRAFTSMEN TRAINING
SCHEME
^ ALL INDIA COUNCIL OF TECHNICAL EDUCATION
PROFESSIONAL
TRAINING UNDERGONE
Completed 'ORACLE DBA' Course at RADIANT SOFTWARE PVT LTD,
WEST MABALAM,
CHENNAI -33.
Language Proficiency :
Languages - Proficiency (1=worst - 10=best)
Spoken
Written
English 5 6
Tamil 9
9
Supplementary
If and when employed by the company
Willing to Travel : yes
Willing to be Relocated : yes
Possess Own Transport : T465022 Valid
Upto Jan 2005
Expected Monthly Salary :
Negotiable
Availability :
Immediately
=================================================================
============Sorry, but according to Apple, iTunes Store: All Sales Are Final
You can avoid accidental purchases.
From the iTunes menu bar click iTunes / Preferences then select the Parental tab.
Select: iTunes Store
Click OK. -
Application for receiving application not working..
Hi..experts.
i m new to j2me programming. plese help me.
I got an application for receiving SMS from net. i nstalled it on nokia N73. but it's not working.
this is the code of that app...
package receivedemo.sms;
import javax.microedition.lcdui.*;
import javax.microedition.io.*;
import javax.microedition.midlet.*;
import java.io.*;
public final class ReceiveMidlet extends MIDlet
//The data we expect to receive.
private static final String TEST_DATA = "This is just a test";
public ReceiveMidlet()
//Signals the MIDlet that it has entered the Active state.
public void startApp()
//Get the display object for this MIDlet.
Display d = Display.getDisplay(this);
//Create and start a new WorkerThread.
Thread t = new WorkerThread();
t.start();
//Create a new Alert.
Alert alert = new Alert("Starting DynamicPushRegisry");
//Display the alert for 2 seconds.
alert.setTimeout(2000);
d.setCurrent(alert);
private class WorkerThread extends Thread
public void run()
//Get all connections registered with the PushRegistry
//for the current MIDlet suite.
String[] connections = PushRegistry.listConnections(true);
if ( connections.length == 0 )
//Nothing is registered, register a connection.
try
//Dynamically register a socket connection
//on port 50000.
PushRegistry.registerConnection("socket://:50000",
"receivedemo.sms.ReceiveMidlet","*");
} catch (ConnectionNotFoundException e)
message(e.toString());
} catch (ClassNotFoundException e)
message(e.toString());
} catch (IOException e)
message(e.toString());
else
//A connection is already registered and data is arriving.
//Fetch the incoming data.
fetchData(connections[0]);
//Shut down to wait for data.
message("Done");
System.out.println("correct till here");
notifyDestroyed();
//Fetches the incoming data.
private void fetchData(String connection)
try
//Open the connection.
Connection c = Connector.open(connection);
if ( c instanceof StreamConnectionNotifier )
//Open an InputStream.
StreamConnectionNotifier scn = (StreamConnectionNotifier)c;
StreamConnection sc = scn.acceptAndOpen();
InputStream input = sc.openInputStream();
//Extract the data from the InputStream.
StringBuffer sb = new StringBuffer();
byte[] data = new byte[256];
int chunk = 0;
while ( -1 != (chunk = input.read(data)) )
sb.append(new String(data, 0, chunk));
//Close the InputStream and StreamConnection.
input.close();
sc.close();
String s = sb.toString();
//Test the data for validity.
//If invalid an exception is thrown.
Assert.assertTrue(TEST_DATA.equals(s),
"Failed to receive proper string: " + s);
//Display the received data.
message("Received: " + sb.toString());
} catch (IOException e)
message(e.toString());
//Display a String message to the user.
private void message(String msg)
//Create a new Alert with the message.
Alert alert = new Alert(msg);
//Display the alert for 5 seconds.
alert.setTimeout(5000);
Display.getDisplay(this).setCurrent(alert);
//Signals the MIDlet to stop and enter the Pause state.
public void pauseApp()
//Signals the MIDlet to terminate and enter the Destroyed state.
//Unconditional when set to true. The MIDlet must cleanup and release
//all resources. Otherwise, the MIDlet may throw a
//MIDletStateChangeException to indicate it does not want to be
//destroyed at this time.
public void destroyApp(boolean unconditional)
//Throws an IllegalStateException with the supplied error message.
final class Assert
private Assert()
static public void assertTrue(boolean exp, String failmsg)
if (!exp)
throw new IllegalStateException(failmsg);
plzz help me...it's important for me. Thanks a lotwhen i send a SMS there is no reaction from application.
i don't know how is this failing.
i am very troubling about this.
i have to receive the SMS that comes to the inbox.
if you have any working source code please give me.
Thank you so much.
Edited by: RavindraDiwakar on Sep 14, 2008 8:17 PM -
Error in registering a provider for External Application for Web Clipping
Getting Error: The provider URL specified may be wrong or the provider is not running. (WWC-43176)
when trying to register a provider for an external application for Web ClippingHi Vineet,
The admins applied a patch to my version of the OracleAS 10g Version 9.0.4. and now I able to register a provider with the same URL but different Provider Name. I added My Yahoo Web Clipping from the Portlet Staging Area. That works fine but when I click on the check mail link in the Web Clipping Studio it gives me the following error. I have tried several times and I get the same error....
An exception has occured : WCS-514 -- Get status code 403 to URL http://us.rd.yahoo.com/my/prop/mail/*http://mail.yahoo.com/ by method get
Please click "Cancel" or "Back" in the above panel (if present) to retry. Otherwise, please try to click "Back" (from the browser) to go back to the Oracle Portal page to restart. -
Configuring Lync Server 2013 to be a partner Application for Exchange 2013
Hello Guys,
I just want to share my experience while configuring Lync server 2013 to be a partner Application for exchange 2013 sever.
As mentioned on technet you need to run Configure-EnterprisePartnerApplication.ps1 script that ships with Exchange 2013.
But when I tried to run the script as described on the technet article, I found it always fails with " the accepted domain is not valid"
I have checked my accepted domains many times and i found that there's no issues with my configured accepted domain.
So I started to review the script to find the issue and I found that the script was configured as below
$acceptedDomains = Get-AcceptedDomain ;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains[0].Name;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
which is totally wrong as below:
firstly it makes $AcceptedDomain variable to equal the Name of the accepted domain.
Not all customers configure the name of the Accepted Domain to be the Domain Name.
Secondly it makes $AcceptedDomain variable to equal the name of the first Accepted Domain.
The first domain may be not the default Accepted Domain.
So I have configured the script as below
$acceptedDomains = Get-AcceptedDomain | ? {$_.Default -eq "True"} ;
if ($acceptedDomains -eq $null)
WriteError ("There is no accepted domain so user can not be created.")
$acceptedDomain = $acceptedDomains.DomainName;
if($UseDomainController -eq $true)
$user = New-MailUser -Name $username -DomainController $DomainController -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true -DomainController $DomainController
else
$user = New-MailUser -Name $username -ExternalEmailAddress $username@$acceptedDomain;
set-mailuser -Identity $user.Identity -HiddenFromAddressListsEnabled $true;
I hope This help.
Thanks
Ahmed FouadHi,
This is helpful, thanks for sharing.
Best regards,
Belinda Ma
TechNet Community Support -
How to enable a partner application for Single Sign-On?
Can someone please advise me on how to enable my existing J2EE web application for the Oracle Single Sign-On?
My requirement is i want to provide the single sign-on authentication service to my J2EE web application. For this, I would like to make my application as a partner application similar like the OracleAS Portal.
I am using Oracle 10g ( OralceAS, Oracle Infra, OID ...)
I found the following service/APIs which Oracle provides. I am not sure which one is suitable for me.
1. mod_osso ( Static)
--- In this case, I have to make a entry in mod_osso.config file to protect the URL. should I have to register the URL again through single sign on admin page ("Administer Partner Application") after make a entry in config file?
2. mod_osso ( Dynamic directive)
-- in this case, I have to modify the code by providing the directives like 401, 499.. etc. So i don't prefer this as i don't want to touch my app.
--If I go with this option, should i have to register the URL with Single sign on server through SSO admin page ( as mentioned in the above step#1) ?
3. SSO SDK
- Since it was deprecated and need java coding, i am prefer this option.
-- however, if i go with this option, i will develop code by using SDK. in this case i need to register the URL in SSO server through admin page.. am i right?
Note:- OSSO server integrated with Active Directory for the authentication.
Thanks,
-Senthilsharon38_74 wrote:
they said that our internal application needs to send a "login request" to etran via SSL with the user's information encoded in base 64 format. etran captures the HTTP header containing user authentication and authorization information, and parses the required information from the HTTP header.
My question is that how I set user information in HTTP header? From my understanding, once I am able to set the user information in HTTP header, it is in base 64 format?Your application need to act like a proxy. You can invoke a HTTP request programmatically using java.net.URLConnection. You can set request headers using URLConnection#setRequestProperty(). Also see the API docs: [http://java.sun.com/javase/6/docs/api/java/net/URLConnection.html]. You only need to know the header field name where to set the Base64-encoded value in. You need to Base64-encode the value yourself.
Maybe you are looking for
-
Standby when open and on when screen is closed... Help! ???
I accidentaly closed my Mac as I was watching Apple TV. I quickly opened it again and and the screen was black. I closed it and opened it again, but the screen stayed black. I removed the battery and turned it completely off several times, but the sc
-
How do I get back all my apps and photos from my old iPhone to my new one? I have never used backup on my old iPhone. So when I upgraded, I asked the consultant if I was able to keep my old apps and all my photos from the old phone and transfer them
-
Discount for paying line rental up front
Do BT still give a discount if you pay your monthly line rental a year in advance? If so how do you do it? Thank you.
-
Hello BW Experts, I am observing lot many delays in various jobs in our BW Production system. Around 300 to 400 jobs are getting delayed by 900 to 2600 seconds over past week. Out of which around 100-200 jobs are delayed over 2000seconds. And on some
-
Hi all, when I have changed a program at production side that is already being used in live systems, it asks me request to change the code, I create new one and want to carry this into live system; however I cannot, it just says it has been released