Dump compute bcd overflow.
hi gurus thanks in advance .
our SAP component version is ECC 6.0 on Windows NT & MSSQL database i got dump compute bcd overflow.in program ZMM_PART2_REGISTER so what is problem plz give solution .
thanks
S.B.
Example:-
catch system-exceptions bcd_zerodivide = 1.
rate = rate / kpein. "put your logic
endcatch .
Similar Messages
-
Tcode DB02 all the values showing zero (0)
Hi Oracle-experts!
I have recently executed the upgrade from 4.6C to ECC 6.0.
I have the following errors after that:
<b>Tcode DB02: by entering the Tcode all the values are showing the zero (0).</b>If I try to refresh the values the background job "space statistic:Default" is starting and canceling after while with "SAPOSCOL short dump" (compute bcd overflow).
<b>Also I have a lot of red messages in TCode dbacockpit.
How can I fix them? </b>
Thank you very much
regards
AxelDie Table ORA_MON_DBCON should contain at least the local database.
e.g.
CON NAME DEFAULT
STATUS A
MAX RUNTIME 1.800
MAX UPLOAD 1.000.000
LOG LIFE 100
DESCRIPTION Local Oracle database
Check all points in the SAP Note 1002840 - No data or obsolete data in DB Space Statistic monitor. This note is very important for this problem.
Best regards
K.Baran -
Dbacockpit overview pane does not get populated
Hi guys,
I have already gone through the several other threads on sdn which repeat the same issue here but I am not able to find a solution via them. Can any one give me some leads into this...
-- CHANGES DONE --
We applied all relevant support packs which were part of Support stack 13. This involved also patching SAP BASIS from 10 to 13. Also NW04S 700 kernel was upgraded to patch 114 (SAPEXE and SAPEXEDB SAR packages)
STATEMENT OF PROBLEM(S)
Tcode dbacockpit does not refresh data in the overview pane.
note: db02old still works and we are able to refresh stats from there but dbacockpit overiew pane does not get populated.
Also post support packs: sap_collector_for_performance runs successfully but reports in job log database system is not supported
When we do a refresh via dbacockpit, the job refresh space statistics ends with a compute bcd overflow dump.
CHECKS ALREADY MADE
--Note 1066044 for the BCD overflow dump does not help. We are already at BASIS pack 13 and the correction contained in the note is already in place. As
per the note since are already at BASIS SP13 we should not be facing this. Why are we facing this then ?
--Note 868063
Call report rsoracup; put in con_name=DEFAULT; operatio=CREATE;F8 did this.
--Note 1002840.(checks done as per note)
a) Check if SAP_Collector_for_perfmonitor is scheduled hourly
It completes successfully but gives job log below
1/16/2007 12:06:14 Job started
1/16/2007 12:06:14 Step 001 started (program RSCOLL00, variant , user ID DDIC)
1/16/2007 12:06:14 Clean_Plan:Cleanup of DB13 Plannings
1/16/2007 12:06:14 Clean_Plan:started by RSDBPREV on server
1/16/2007 12:06:14 Clean_Plan:Cleaning up jobs of system xxx
1/16/2007 12:06:14 Clean_Plan:finished
1/16/2007 12:06:15 Database system not supported
1/16/2007 12:06:17 Job finished
Why ?? (we got oracle 10.2.0.2)
b) se16 -> table TCOLL. Check if entery RSORACOL exists.
It does exist as below
RNAME RSORACOL
RENUM 1
SYTYP S
ALTSY
DAYOW XXXXXXX
TIMOD XXXXXXXXXXXXXXXXXXXXXXXX
c)SE16 -> table ORA_MON_DBCON. Check for enrry con name: DEFAULT.
It does exist as below
CON NAME DEFAULT
STATUS A
MAX RUNTIME 1,800
MAX UPLOAD 1,000,000
LOG LIFE 100
DESCRIPTION Local database. R/3 system available.
d)se16 -> table db02_coll_plan. Check if all the entries have status A and there are 64 entries. This is ok
--Note 1042725
SE16-> PROGDIR for Name= 'LSDBORA3F03'; Set field EDTX to blank
All entries have EDTX blank but there is no entry 'LSDBORA3F03
Despite all the above checks I am unable to get the dbacockpit to refresh. Does anyone have any ideas. Will putting in the latest DBSL shared library patch for oracle solve this... I did SAPEXE and EXEDB.SAR latest. Any ideas...?
Cheers, Vikram
[email protected]For this issue it's still not working for me in Sanbox BI. I got a SAP message open for this. But I got it to work on Dev and TST systems. There was one mistake I was making. This may not be the cause though but just for your info. When we go to dbacockpit, click on collector setup icon. And there when we give connection name = "default" and then action as "create connection", I was not saving the variant. Click save and give a name to the variant like "refresh stats" or something. Then click refresh icon so that the "Refresh space statistics" will run in background. When I saved the variant on dev and test BI I did not end with a BCD overflow dump for the "refresh space statistics" job.The refresh space stat job needs to find the variant name.And this then populated the dbacockpit -> space -> overview pane. Although the "perf for monitor" job still has log entries "db system not supported" that doesn't matter. It's probably a message we can ignore.
Also if you are still facing prob, check these.
You say you are on SP12 which SP component are you referring to (stack number ?. BASIS ? BW ?). Make note I have done the support stack 13 which contains upto the BW patch upto 15 and upto BASIS patch 13. Note 1066044 says if you have BASIS 13 you won't face this problem .
Is your "perf for collector" job running without issues. That is a prereq to the "Refresh space stats" job. Try to troubleshoot that as well. I think the refresh stats job has to find the data in table MONI which gets populated via "perf for collector" (RSCOLL00).
regards, Vikram -
ABAP short dump error while creating an invoice
Hi All,
We are creating a delivery(Unit is EA) for the material for which the Unit Conversion is maintained as 1CS = 48 EA. So while creating a delivery If I maintain the delivered quantity is less than 24, I am not able to create an invoice.It's throwing an ABAP short dump error BCD zerodivide run time error.
If I deliver greater than or equal to 24, then the invoice is created without any issue
I have checked if there is any CMIR record but no record is maintained.
Can anyone help me out on this?
Regards,
ManjunathHi Manju,
Can you post the dump screen shot, which should contain the source code for that dump.
Regards,
Krishna -
<h5>
Hi All,
As I post in MIRO I get a dump indication airthmetic overflow .
Pls answer.
Shweta.
</h5>Hi,
You have not mentioned which fiield is getting overflow. Usually such overflow happens due to incorrect PO history update.
Please check the field which is causing overflow . You can search notes based on that field. Generally note 781014 helps in
case of overflow.
781014 Clearing values in purchase order currency are too high
Kind Regards,
Suneet -
Hi
I have not been able to find a relevant thread, if there is one please direct me.
Sorry if my use of jargon/process is not that clear.
I am using iCloud.
Can I, and how do I, delete app data from my laptop and keep all apps running normally and still on my ipad and ipod as they currently are?
My computer is overflowing and I see iCloud as a chance to clear some hard disk space.
If i delete the apps from my itunes browser on PC then it deletes them from my entire Itunes account. Can I just go into my itunes folder and delete the base application files?
If I remove files/apps and I sync my devices using my pc for music/video/photos etc then will it pick up that the apps and app data is missing from my pc?
Thanks in advance
lachIm trying to get an answer to this same question. My poor pc is almost out of hard drive space bc of all the iphone backups pre icloud. I want to know if I go into the itunes file on my pc and delete all those files will they still be safe considering they are on icloud now? Its frustrating bc I cant seem to get an answer to this question. Have you come across any information on this issue since posting this question? Thanks so much!
-
Problem opening Project/WBS Elements in CJ03
Hi Experts,
I have created an interface which posts PROJECT01 Idocs into SAP 6.0. Idocs are posted successfully and I can see Projects/WBS elements in tables PROJ and PRPS.
However, when I try to open a project/wbs through transaction CJ03, it throws short dump mentioning memory overflow. I checked by debugging CJ03 and found that the code is going into infinite loop.
Could anyone help me understand why this kind of problem is coming? What is the reason the code is going into infinite loop? If the project/wbs structure is not getting created properly, how can I check that?
Thanks in advance.
NetreyThe issue is resolved. The structure coming throug Idoc itself was incorrect.
-
Hi Folks,
I had declared a field kursf as kursf like rbkp-kursf.
When I pass a value of 10000.0000, it is giving me a short dump of saying overflow and the field is too short.
When I declare the field kursf as kursf type p decimals 5 and pass a value of 10000.0000 it is working fine.
Can anyone here let me know what is the difference if we declare a field as type p?
Thanks,
K.Kiran.The valid length for packed numbers is between 1 and 16 bytes; two decimal places are packed into one byte, whereby the last byte only contains one place and the plus/minus sign; after the decimal separator, up to 14 decimal places are permitted. Depending on the field length len and the number of decimal places dec, the following applies for the value area: (-10(2len -1) +1) / (10(dec)) to (10(2len -1) -1) /(10(+dec)) in steps of 10^(-dec). Values in between this range are rounded off.
fractional portion
Fractional portions contain the fractional part of a number and are noted independent of the number system to the right of the separator. These are the decimal places (for decimal numbers) that come after the decimal separator.
Regards -
Hi All,
I have a program in which i dont want decimal values.So i am moving the value from Floating point to int4.Now i have a problem that one of the values is '3.0114e+09' and more and its giving a dump due to overflow .Doe any know how to sole this .
the type for
eg
Data v_var type F value '3.0114e+09'.
data v_int type int4.
move v_var to v_int.
write: / v_var, v_int.
the code in my program is
MOVE TIME_SERIES_ITEM-TIME_SERIES_VALUE TO WA_DOWNLOAD-M.
TIME_SERIES_ITEM-TIME_SERIES_VALUE is of type /SAPAPO/FLTP ie is of type FLTP length 16 and decimals 16
WA_DOWNLOAD-M is of type int4.
Regards
AhasanHi,
Make sure you have the "Fixed Point Arithmetic" checked in the attributes of the program and declare your variable as P DECIMALS 0.
Regards,
Ravi -
Re: {990FXA GD-80 v2} Phase LED noise question
Hmm i dont mean to HI-Jack a thread, but i didnt know the lights were meant to go on an off ? .. my lights above the ram all stay permanently on .. is that a good or bad thing ? .. also there is no noise coming from mine.
well if i have a computer with Phases i do not like the frequancy to bounce around through states so i make it so its at full Phase all the time from a few seconds after boot as i disable all power savings options (i do not care about saving money on my bill so i hate power saving features as they just annoy me)
if you have C&Q or any other power saving features on it will be very erratic, as for the phases increasing when you type that is normal because your drivers are dumping computations for the inputs into the CPU so it spools up to decipher the data and send it into the I/O on the board to go on its way (same thing for your browser as that is then running a EXE that is a compressed archive that needs to be decrypted as it opens using the CPU so it runs at full speed as its under load at that point)!
so nothing your reporting sound wrong with whats happening!
(open task manager and see what your CPU is doing to understand why its jumping around alot) (the CPU Phase lights were suppose to just let you know at what strength level your CPU was currently in - load effects the Phases as it actually ramping up the clocks in bursts when any program or load is being applied so more Phases are brought online to prevent instability happening as the CPU is increasing its clocks to stop it choking)
as you have had no BSOD's or crashes it all sounds like it functioning correctly! -
Hi,
I'm using Matlab script node to interpolate a 2D Surface. But sometimes it shows an error and close the program.
The error message is not always there. It appeared when I gave it some specified "XLength" or "YLength".
Here is the error message:
Error 1050 occurred at LabVIEW: Error occurred while executing script.
Error message from server: ??? qhull precision error: initial facet 2 is coplanar with the interior point
ERRONEOUS FACET:
While executing: | qhull d Qt Qbb Qc
Options selected for Qhull 2003.1 2003/12/30:
delaunay Qtriangulate Qbbound-last Qcoplanar-keep _pre-merge
_zero-centrum Pgood Qinterior-keep _max-width 1e+003
Error-roundoff 1.4e-012 _one-merge 9.7e-012 Visible-distance 2.8e-012
U-coplanar-distance 2.8e-012 Width-outside 5.5e-012 _wide-facet 1.7e-011
The input to qhull appears to be less than 3 dimensional, or a
computation has overflowed.
Qhull could not construct a clearly convex simplex from points:
The center point is coplanar with a facet, or a vertex is coplanar
with a neighboring facet. The maximum round off error for
computing distances is 1.4e-012. The center point, facets and distances
to the center point are as follows:
facet
p4
p20
p0
distance= -1.1e-013
facet
p24
p20
p0
distance= 0
facet
p24
p4
p0
distance= 0
facet
p24
p4
p20
distance= 0
I hope, I can get some advises here. Thanks in advance!
Attachments:
Snap.jpg 23 KBHi,
I think you are using LabVIEW 8.5. There are some bugs in LabVIEW 8.5 which cause the 'linear' and 'cubic' options of griddata to return incorrect result. Fortunately, we have already found these bugs and fixed them. If you got a chance to try the LabVIEW 8.6 Platform Beta, you could verify the fix. Here, I attach some snapshots of the result for the 'cubic' option of griddata with the fix. I specify the XLength and YLength to 1000. Are these the results you want?
As to the crash problem, I am unable to reproduce it on my machine. I follow the instruction to set XLength to 1000 and YLength to 880. All combination of method and option of griddata work well. Therefore, I do not have any idea about it. Maybe, you can try to reinstall the LabVIEW software.
I do not have access to MATLAB software. Hence, I am unable to run your code with MATLAB Script Node.
Many thanks!!!
帖子被ttrr在03-18-2008 08:39 PM时编辑过了
Attachments:
spline.PNG 28 KB
nearest.PNG 28 KB
linear.PNG 26 KB -
Incoming order analysis calculation
Hello,
I have an issue for the old WBS
Incoming order values in table COSB is not calculated correctly and system has determined very huge value.
As the value is very huge (13 digits), system is giving dump of Arithmatic overflow while closing.
SAP has replied to correct the COSB table value manually and the correct values can be determined by using the actual costs in the corresponding database tables (COSP and COSS).
Can any one let me know how COSS and COSP table entries are used to calculate COSB values.
thanks, Madhusudan patilHi
Try using Tac KE24 and check how many digits are being displayed.
Regards,
PSR
Edited by: PSR on Dec 6, 2011 2:43 PM -
UCCX v7 Script Trigger Limit?
I'm having an extremely difficult time getting calls to complete to an agent in an enterprise queue. Each agent in this queue has their own TFN which is directed to their specific trigger in the application. At one point this agent was able to handle her own calls, then calls stopped ringing to her and went directly into overflow where they'd be handled by another agent and forwarded back to her.
Without any understanding why and no log to provide detail I deleted the agents skill, resource assignments, CSQ, and team settings. After rebuild she worked again, then suddenly stopped working. Same deal, no reason why, calls just seem skip over her and dump right into overflow.
I opened a case with TAC and they were only able to help up to the same point where I made changes. They did exactly what I did but this time no calls are completing to her ever, they all go directly into overflow. I asked the engineer if there is a limit in CCX to the overall number of triggers any one application is allowed?
Other than going out of my mind to fix this, I have no other ideas, TAC couldn't help, and I have no backup or support at my company to provide any other suggestions.
Any help is greatly appreciated.Hi Aaron, thank you for responding.
Yes, in reactive debug dialing the trigger runs the correct script. stepping through the logic follows correctly and assigns the call to the correct skillSet variable. I tried on 5 other agents the same debug and the call lands on their resourceID correctly. When dialing the problem agent, it ignores her completely and sends the call into overflow assigning to whatever available agent is ready longest in queue. That agent then forwards the call back to the correct agent. This makes no sense and it's driving me crazy. -
Short Dump : Page Overflow
Hi All,
When i am executing a report on Production, i am getting short dump - "Page overflow".
It's very urgent.
Early response will be highly appreciated.
Best regards,Can you provide more details?
From what it looks like, i think your basis should increase the memory allocations for your internal tables.
Regards,
Ravi -
LAST WEEK STARTED GETTING A BLUE SCREEN (CRASH DUMP) AFTER CLOSING I TUNES, THAT CAUSES MY COMPUTER TO SHUTDOWN. IVE BEEN TOLD BY A PC REPAIR SHOP THAT I DONT HAVE A VIRUS. I DO HAVE ANTIVIRUS PROTECTION ON MY PC. ATTEMPED TO REINSTALL I TUNES BUT MAY NOT HAVE DONE IT CORRECTLY. I STILL HAVE THE PROBLEM. THE BLUE SCREEN ONLY HAPPENS WITH I TUNES. I HAVENT MADE ANY RECENT CHANGES TO MY MUSIC- NO DOWNLOADS /UPLOADS. ANY KNOWLEDGE OF THIS SITUATION? THANKS!!
Hey Ishland,
You are not alone. I'm getting the same thing I'm running Vista. I'm reading that Windows 8, 8.1 preview, Vista and XP.
I'm thinking this has to be a Apple update to iTunes 11.0.4.4 fix.
Cheers,
Steve
P.S. you might want to make your post easier to read by turning the cap lock off.
Maybe you are looking for
-
Can I upgrade graphics card of my Laptop?
Hi folks, I want to know whether I can upgrade graphics card of my laptop. Now a days most of the high end games are not working in my laptop and I'm pretty disappointed. Please let me know whether I can do that. My laptop model is HP Pavillion DV5 1
-
When can we use isync with Nokia N95?
When will the Nokia N95 be on the list of compatible phones for isync. G4 Powerbook Mac OS X (10.4.10)
-
S_CTS_ADMI Authorization issue
Hi Experts, Every now and again a user sends me a SU53 with the error requesting access to S_CTS_ADMI field TABL. The user of this morning is trying to release a purchase order using transaction ME29N. Why would the SU53 indicate that the user want t
-
New Oracle DBA - Need help with backup & restore procedure via RMAN
Hello everyone, I've been a SQL Server DBA for 12 years now, but new to the Oracle space. My first assignment at work was to refresh our training environment with production. So with that said, I took a full backup of our production database via RMAN
-
Its really irritating having all my songs there one day and having half of them go missing the next and i haven't done anything to cause the files to be lost, on top of that it's completely randomised in what songs have gone missing as it is not whol