Dump in PO print preview

Hi Experts!
When i see the print preview with the standard output type NEU it works fine.
But when i use some Z message type it will show the preview.
When i press back button after the PO preview and come back to message type pop-up screen(In case of multiple message type).
At the pop-up screen if i press any button it will give the short dump.
if i use single message type attached. it will give the dump at the back button itself at the preview screen.
Error description -
RAISE_EXCEPTION
Program                               CL_HANDLE_MANAGER_MM==========CP
Include                                 CL_HANDLE_MANAGER_MM==========CM005
Row                                     13
Module type                         (METHOD)
Module Name                       GET
Please help me out ASAP.
Thanks and Regards,
Mukesh Dhakar
Edited by: Mukesh Dhakar on Jun 24, 2010 8:44 AM
Edited by: Mukesh Dhakar on Jun 24, 2010 8:47 AM

I got the solution.
Set im_id = 1 when sy-ucomm = 'PREVOUTPUT' in enhancement spot of FM MEPO_DOC_READ,
Regards,
Venkat B

Similar Messages

Regarding error "Field symbol is not assigned." during print preview

Hi experts,
    I am getting dump while trying print preview for particular POs in ME23n transaction(ECC 6.0). Please refer the below dump error:
Runtime Errors         GETWA_NOT_ASSIGNED_RANGE
Date and Time          29.09.2009 19:30:39
Short dump has not been completely stored (too big)
Short text
     Field symbol is not assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A field symbol that was not assigned was accessed
     (data segment no. 32769).
    The field symbol is no longer assigned because there was an attempt
    makde previously in a Unicode program to set the field symbol using
    ASSIGN with offset and/or length specification. Here, the memory
    addressed by the offset/length specification was not within the
    allowed area.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED_RANGE" " "
    "SAPLSTXC" or "LSTXCFFT"
    "FT_COMPOSE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
   2. Corresponding system log
      Display the system log by calling transaction SM21.
      Restrict the time interval to 10 minutes before and five minutes
   after the short dump. Then choose "System->List->Save->Local File
   (Unconverted)".
   3. If the problem occurs in a problem of your own or a modified SAP
   program: The source code of the program
      In the editor, choose "Utilities->More
   Utilities->Upload/Download->Download".
   4. Details about the conditions under which the error occurred or which
   actions and input led to the error.
I am getting this dump only for few POs.. Rest of the POs are able to print. I am not able to find notes for this issue. Is there any SAP notes available for that or Is there any configuration issue related to this?
Please provide solution for thsi as soon as possible.
Thanks and Regards
Subbu

A field symbol is not assigned, but thats what the dump is telling you. Mostly this happens, when fields or function modules are stored by name, like the fieldnames in the fieldcatalog in an ALV report. It a field referenced in such a way does not exist you will get this error. Always store fieldnames and function names in capital letters and check mistyping of 1L 8B and so on.

Purchase order print preview - Short Dump - in ME23N

Dear Experts,
I am doing PO layout in PDF format . When i see print preview in me23n transaction its displaying as PDF format.
when i close the output selection popup screen its giving short dump, saying that ' A RAISE statement in the
program "CL_HANDLE_MANAGER_MM==========CP" raised the exception condition "FAILURE". Pls let me know if
anybody come across this issue.
Thanks & Regards
Ramesh Manoharan.

Hi,
Dump is a result of common work area 'cleanup' procedure inside BAPI_PO_GETDETAIL1 (module cleans memory area which transaction ME2xN expects to be filled).
Luckily you are able to turn off this code section by adding some MM tool method call just before calling FM BAPI...
you need only one code line - worked perfectly in my case:
cl_mmpur_bapi_po=>put_repid( im_repid = sy-repid ).
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING..............
Regards,
Rafał Szczerba

Error in print preview in ALV report

Hi....All,
Good Day.
I have developed a ALV report. It is displaying all data properly. The problem is...
When I am pressing the print preview button... it is getting dump.
The dump short message is....... "Field symbol has not yet been assigned".
Hope that I will get a solution from you as previous.
With Thanks
Sohel

Do you use a field for coloring a column or cell?
If the coding is not too large it could be helpfull to post the coding as well.
Regards,
John.

Error (short dump) while doing Print review of PO

Freinds,
Business Scenario:We have developed a custom message type for PO output based on standard message type NEU.Also we have created a custom requirement type such taht print as well email output can created by system.
Problem:While doing print preview (via TCode ME23N)of the custom output we manage to see the print preview of PO -->then come back.
But while coming back we get a short dump related to include CL_HANDLE_MANAGER_MM==========CM005.
If any one of you have faced this problem eralier please let us know about the solution.
Regards,
Shailesh Seth

check the OSS note 358293, 548857, 923695

Can't print preview or print in Excel or PowerPoint

Gosh, I've been so busy fighting wireless networking issues with Leopard, it wasn't until today that I finally had a need to print an Excel spreadsheet and much to my slowly building frustration with Leopard, that too is a no-go in Leopard. In either Excel or PowerPoint, using "print preview" yields only blank pages and if you attempt to print the document, you get precisely the same, just blank pages.. Such is not the case in either Word or Entourage... Those both print ok... What I also find somewhat ironic is if I dump those same Excel spreadsheets into Parallels under Windows XP and the pc version of Excel, I can print the documents with no problem... Ouch... On my mac I'm running the most current version of Office (11.3.9) and my printer is a Brother PrinterMFC5440CN. I've encountered this same printing issue on both of my macs, a MacBook Pro and a G4, both running Mac OS X 10.5.1... Anyone have any possible solutions??? thanks... bob...

Hi Robert,
Just wondering if you sorted out this problem? I am new to Macs and recently bought an iMac after being a PC and Windows user for years. I have never had problems with printing but very frustratingly do now with the Mac. I have an Epson R265 and can print from photoshop, entourage, excel but not from word.
If you had any success with this problem could you let me know.
thanks very much
Sara Bell

PL45 Print preview and PDF file with SN

Hi, we upgraded to PL45 and everything is working well other than one issue. The issue is with print preview and converting to pdf files when item list with SN is involved in a form (e.g. Delivery and Invoice). SBO will crash with file dump.
Is there anyone having similar issue? If so, how was the issue was resolved?
If anyone is at PL45 could you let me know the names of the documents when printing "Delivery" form with items tracked by serial numbers? I suspect it is this document that's giving us problem.
Thanks.
Yi

Yi,
I would follow the procedures layed out in note 1009615 and submit a ticket witht the log files attached. Please seen note below.
Good luck,
Karl
In case SAP Business One application is shutting down unexpectedly, you should follow these instructions:
Go to SAP Business One application folder:
Right click on the shortcut for SAP Business One which is located on your desktop.
Press 'Properties' button.
Press the 'Find Target' button on the bottom left of the window, SAP Business One application folder will open.
Open the Log folder, which now should contain 2 files that hold the data about the cause for the shutdown. The first file name is: SAP Business One YYYY MM DD HH MM SS.DMP. The second file name is: SAP Business One YYYY MM DD HH MM SS_dyagnostic.TXT.
Open a message to your support center and attach the 2 files and to the message. You need to pack the file *.dmp using a tool like Winrar, because you will not be able to attach *.dmp files directly. In the message content describe the actions that were taken. (please refer to the StepTemplate.xsl in the attachments).

FF windows goes blank white and freezes if I click a link in another application when Print Preview is open in FF (Win 7 64-bit)

Possible bug: FF dumps my session if I try to open an external link without closing print preview view. I had left the Print Preview screen open in FF after printing a web page, and I clicked a web link in another application, which would have normally opened in a new tab in FF. However, only the Print Preview window was displayed and when I clicked "Close", the FF window when all white. Back/backspace wouldn't work and I had to close FF and start a new session. I tested this a few times and it happens every time. I didn't think to test whether this happens in Safe Mode.

Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

OBJECTS_OBJREF_NOT_ASSIGNED-E-Recruitment Candidate Profile: Print Preview

Hi Experts,
On click of Print Preview on the candidate profile, I am getting short dump as follows:
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
Short text
Access via 'NULL' object reference not possible.
What happened?
   Error in the ABAP Application Program
   The current ABAP program "CL_BSP_RUNTIME================CP" had
    terminated because it has
   come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: " ").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.
Please guide.
Thanks
Deep
Edited by: depeshn on Apr 22, 2009 8:50 AM

Hello I am also getting the same problem. Will you plz tell how did you resolve this issue.

Smart form PRINT PREVIEW working on one box but not on other box

Hi Guys,
I have one program which works on DV1 box but is not working on DV2 box. It is NOT giving short dump. In this program there is PRINT PREVIEW button. This print preview button is work in DV1 but not in DV2. DV1 & DV2 are ECC 6 and we installed SAP service pack.
I will really appreciate if somebody can give me some direction.
Thanks,
mini

Program is save in both the boxes. DV2 has SAP service pack, but DV1 not. I think this problem is related to FONTS not being supported by service pack.
How can I fix this?
Thanks,
mini

POs "Print preview".

Hi,
when printing a PO with "Print preview" button system
generates the following error:
<b>Sytem message 042 from work area SSFCOMPOSER does not exist </b>
Message no. C!002
Diagnosis
Message 042 from work area SSFCOMPOSER was not defined.
Procedure
You have to maintain this message in the system. If you have
    authorization for Customizing, maintain the general program errors.
    Otherwise, please inform your system administrator.
How can I solve this issue?
Best regards

Hi!
You can do the followings:
- Call ST22 and select this dump message. Click on the Debug button and check out what is missing, or which variable is wrong.
- Search on OSS website for the CI002 error message. Mostly there are only a few OSS notes and 1 might help you.
Because the problem is with some smartform, and in the standard SAP the PO print is solved with SAPScript, there could be some trouble with the SSF (SAP SmartForm) development.
Regards
Tamá

Regarding Print preview

Hi to all,
I have created one ALV report.Am getting correct output data.But when we click the PRINT PREVIEW its going to dump.And saying
" only character-type data objects are supported at the argument
position "obj".
But when i comment the below coding i am getting print preview perfectly.
Edu.Cess
G_FIELD      = 'ECESS'.
G_TABLE_NAME = 'WITH_ITEM'.
G_DDICTXT = 'L'.
FIELDCAT_LN-SELTEXT_L = 'Edu Cess(2 %)'(014).
To set the properties of the field catalog
PERFORM FIELDCAT_FILL USING G_FIELD G_TABLE_NAME G_DDICTXT.
H.Edu Cess
G_FIELD      = 'HCESS'.
G_TABLE_NAME = 'WITH_ITEM'.
G_DDICTXT = 'L'.
FIELDCAT_LN-SELTEXT_L = 'H .Edu Cess(1%)'(015).
To set the properties of the field catalog
PERFORM FIELDCAT_FILL USING G_FIELD G_TABLE_NAME G_DDICTXT.
Please give me the reply.
regards

Hi,
I also come across the same problem it will display perfactly but if u click on print privew button it will give dump.
the solution is check with your internal table 'WITH_ITEM' if there is any field other then character then just make it character or string type it will work.
Hope this helps
Bikas

The Mozilla WHITE start page is blocking the upper left Firefox to Print to Print Preview, so i can not see what is on the Printer Glass

The BIG WHITE MOSTLY BLANK , MOZILLA START PAGE was blocking my use of PRINT PREVIEW, from the orange "Firefox" in the upper left corner.
I was told i was using an out of date version of Firefox.
But no "click here to update".
So i downloaded the new edition of Firefox.
And still, i can not see PRINT PREVIEW, because the large white screen of the MOZILLA START PAGE is blocking it.
I have selected a background wallpaper, so would rather not see ANY of the BIG WHITE START PAGE, at all !!
HEEEELP,,,,,,

Hi,
Can you please post a [https://en.wikipedia.org/wiki/Screenshot screenshot] of the start page when it is blocking the print preview. Please note that you may have to change to the tab of the site to be printed to see the print preview of the page. If the problem persists, please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Sy-ucomm value for print preview

Hi friends,
Can any one tell me the sy-ucomm value for the print preview..?

Hi,
If you are asking the function code of Pop-up you get while printing ..then answer is no..even if you get the fcode you cannot handle it in your program.
What exactly you are looking for ?

Condition type freight is not getting displayed in print preview

Hi,
I created PO, and while seeing its print preview:
Condition type freight is not getting displayed.
Where i missed?
Uts

hi,
Inddition to M/08...(As given above)...
Also do check the smart form or SAP script...used for the output...check it with the ABAPer...whether the field is liable for o/p or not??
Smart form is attached at message type of message determination..
Regards
Priyanka.P

Dump in PO print preview

Similar Messages

Maybe you are looking for