Dump 'LOAD_PROGRAM_NOT_FOUND' while using QM02 and ZXqm02

Dear All,
We are facing dump LOAD_PROGRAM_NOT_FOUND at the time of QM02 and One Z transaction ZXQM02.
Could you please tell me what should be the reason or what should be the remedy?
Regards,
AMAR

There can be various reasons for this error :
1. You have change dthe standard program for QM02
2. Due to wrong customizing
3. Check the dump and ther eyou can find the root cause of this error e.g the Z txn uses a program which is generated during runtime and this program is not available .
Edited by: Sandeep Kumar on Sep 24, 2010 1:34 PM

Similar Messages

Error while using REMAP_TABLE and WHERE clause together in IMPDP

I am trying to move some records from a very large table to another small table.
I am facing trouble while using REMAP_TABLE and WHERE clause together in IMPDP.
Problem is data filter is not getting applied and all records are getting imported.
here is how I have simulated this. please advice.
CREATE TABLE TSHARRHB.TMP1
A NUMBER,
B NUMBER
begin
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (1, 1);
Insert into TSHARRHB.TMP1
   (A, B)
Values
   (2, 2);
COMMIT;
end;
expdp system/password TABLES=tsharrhb.TMP1 DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp REUSE_DUMPFILES=YES LOGFILE=EXP.log PARALLEL=8
impdp system/password DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY='TSHARRHB.TMP1:"WHERE TMP1.A = 2"' REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Import: Release 11.2.0.1.0 - Production on Fri Dec 13 05:13:30 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Automatic Storage Management, OLAP, Data Mining
and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/********@GRD6.RBSG DIRECTORY=GRDP_EXP_DIR DUMPFILE=TMP1.dmp LOGFILE=SSD_93_TABLES_FULL_EXP.log PARALLEL=8 QUERY=TSHARRHB.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=TSHARRHB.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "TSHARRHB"."TMP3"                           5.421 KB       2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at 05:13:33
here I am expecting only 1 record to get imported but both the records are getting imported. please advice.

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3"                             5.406 KB       1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

My iphone 5 gets hot while using it and while charging too.... Please help me what should i do?? Should i replace the battery....?? Because it gets hot even within 5 minutes also.... And it is happening from 2 weeks daily.

My iphone 5 gets hot while using it and while charging too.... Please help me what should i do?? Should i replace the battery....?? Because it gets hot even within 5 minutes also.... And it is happening from 2 weeks daily.

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset > http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring > http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

I have 5s and is getting heat while using it and durin charging

I have 5s 7.0.4 (64G) and is getting heat while using it and durin charging

thanks dear friend,
but from Apple - Batteries - Notebooks:
Apple does not recommend leaving your portable plugged in all the time !!!
it's opposite of what you saying !

I just bought my phone few days ago. From the day I bought it I realized the phone heats up after a little use. It gets really hot while using Wifi and downloading. Anyone else having these issues? What's the solution to this?

From the day I bought it I realized the phone heats up after a little use. It gets really hot while using Wifi and downloading. Anyone else having these issues? What's the solution to this?

Your VGA is definitely corrupted and it is irreparable, so just make the HP to change your vga.
Also next time read my post on how to keep your laptop cool to avoid same issues again.
I assume your laptop was pretty hot during some time and that's the result you've got.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

How can I erase images from the clipboard while using ink and slide or sketches and lines apps?

I've been having trouble with my clipboard while using my adobe ink. Is there any way I can erase the images saved on the clipboard, because have been trying and I can't find a way to do it, it seems like the only option is by turning the selection into favorites and then a trashcan icon appears, but even if I choose delete it will only be erased from the clipboard favorites while remaining on the clipboard.
I've thought erasing the sketches App, or deleting the project but I don't want to risk losing my work.
Thanks!

I posed a similar question in the Draw forum and got this reply:
Re: How to clear the clipboard and empty drawings ?
In short: you can't erase those clippings, at least not currently.

Error while using Enumeration and Vectors

Hi all,
I am new bee in java i am using enumeration and vectors in my JSP page,
i want to get the values from JSP page using enumeration and store then in Vector, below is the code, its giving errors saying ArrayIndexoutofException
pls help, thanx in advance.
          while ( enum.hasMoreElements() )
          String enumString = (String)enum.nextElement();
          String[] enumValue =request.getParameterValues(enumString);
          for(int n=0;n<=enumValue.length;n++)
          tempbean.dbRows.add(enumValue[n]);     //tempbean.dbRows is a vector,
if I seperate the For block out of While loop then im getting cannot resolve enum variable, bcoz its declared in while loop, I cannot declare it out side of while loop because I dont know the perfect size of the array and it will change dynamically.
pls help

Thankyou ,
It worked out,
Thank you very much.

Dumping core while using rwFactory()- create( )

hi Guys!!!
I'm not sure if this is the right forum... but please help..
Please have a look at the code.
int main(int argc, char *argv[])
std::cout << "Begining of the program .. " << endl;
RWBag dummy; //might have to create a dummy RWBAG to link the correct code;
std::cout << "This program creates an RWBAG using theFactory"
<< std::endl;
RWBag* b=(RWBag*)(getRWFactory()->create(__RWBAG));
b->insert( new RWCollectableDate ); // Insert today's date
b->clearAndDestroy(); // Cleanup: first delete members,
delete b; // then the bag itself
return 1;
I am using Roguewave version 8 on Solaris 10.
The problem is the prg is dumping core while creating the RWCollectable object using (getRWFactory()->create(__RWBAG));
I'm not sure if it the type casting or in the create itself.
Thanks,
Rahul.

It may be that an exception is being thrown that your not catching. Coherence exceptions need to caught as Exception::View not Exception::Handle. If there is an exception it's text should help identify if there was an issue running the updated server side.
Mark
Oracle Coherence

Mac Mini 2011 crashing often while using Chrome and Firefox

I have a Mac Mini 2011. OS is Yosemite 10.10. Processor 2.3 Ghz Intel Core i5. 8GM RAM 1333 MHz DDR3. It crashes often especially while using Firefox or Chrome. Basically it just hangs showing the beach ball. Then we have to turn it off and on.
How should I debug the problem?
Note: Although recently I upgraded RAM from 4 to 8 GB, the crashes were happening before that activity.
Rahul

When it next crashes note the time. Then reboot and open the Console app (in Utilities folder). Look for suspicious log entries at the time of the problem and post them here

HP Prime crashes while using CAS and loses stored variables

As the title suggests I'm experiencing some problems while using CAS whit my new Prime (it arrived 3 days ago). While doing operations like scrolling up the screen and copying/pasting things, or simply defining new variables it happens that the prime crashes (sometimes it also restart itself) and loses all the variables I've stored.
The prime is running the latest FW (6030). I've also noticed that after the firmware upgrade the DataStreamer icon in the app library has became grey and an exclamation mark appears when I try to start it.
Any help or suggestion would be great.
Thank you in advnce,
M1cha3l

I have only a little experience with Primes RPN.
It does seem that for user variable, you do need to first create them before storing anything to them. a ENTER OK creates user variable a and puts a 0 on stack 1:
123 ENTER, 'a' ENTER, Shift Sto> or 123_'a'_Shift Sto> ( _ = space key) store 123 in a and put 123 on stack 1:
Other more expert users may offer better advice.

Difference in results while using .CHILDREN and .ALLMEMBERS

Hi,
I have two almost similar MDX queries, in one I am using .CHILDREN and in other .ALLMEMBERS. First one returns no rows, the second one returns two. Please help me in understanding why!
Query 1
select
[Measures].[Claim As Of - Count] on 0,
[Accident Date].[Year].allmembers on 1
from [AW Cube]
where [Accident Date].[Year-Quarter-Month-Date].[Year].&[2010]
---NO rows
Query 2
select
[Measures].[Claim As Of - Count] on 0,
[Accident Date].[Year].children on 1
from [AW Cube]
where [Accident Date].[Year-Quarter-Month-Date].[Year].&[2010]
--2 rows
---- Claim As Of - Count
--All 637,350
--2010 637,350
TIA,
Sourav
EDIT: Some clarifications: AccidentDate is one of the Dimensions in my Cube [AW Cube]. Year is a natural hierarchy while [Year-Quarter-Month-Date] is an user defined hierarchy. [Year-Quarter-Month-Date] is created in the below way: Year-->Month--->Quarter--->Date.
So 'years' can be obtained by doing [Accident Date].[Year-Quarter-Month-Date].[Year].members and also [Accident Date].[Year].MEMBERS. Hope I am clear.

Well, got the answer myself.
Actually every ".CHILDREN" gets internally translated to ".CURRENTMEMBER.CHILDREN"
Now, [Accident Date].[Year].&[2010] is the corresponding value for the slicer on user defined hierarchy.
Here,
"[Accident Date].[Year].CHILDREN"
actually gets translated to
"[Accident Date].[Year].&[2010].CHILDREN"
which is basically an empty set. Hence, Voila! The empty result set!

Comparison of number of bytes transferred over network while using HTTPService and RemoteObjects

If I have to transfer data(say records of 100 employees in a DB) from Server to Client, I could use HTTPService and fetch the data as an XML file and then convert it to ArrayCollection in the Client. Or use RemoteObject and transfer the data in binary. Lets ignore other methods(Web Services etc) of data transfer for the moment.
Now, for the same data, if I implement the application using HTTPService and RemoteObject, I notice that the number of bytes transferred over the network is less in case of HTTPService(XML) when compared to RemoteObject(AMF) which is a shock to me. My understanding is that AMF transfer should be more compact than XML. Ofcourse, once the data is available, RemoteObject result processing is noticeably faster than HTTPService result processing. My concern is why data transferred using AMF is larger than XML. As an example, you may refer to the samples provided in TourDeFlex. Refer to the following:
HTTPService:
    Found in : Flex Data Access->HTTPService->BasicExample
    Link: http://www.adobe.com/devnet-archive/flex/tourdeflex/web/#docIndex=0;illustIndex=0;sampleId =12700
    Click on the 'Get Data' button to fetch the data.
    Bytes transferred - 1050
RemoteObject:
    Found in : Flex Data Access->RemoteObject->BasicJavaRemoting
    Link: http://www.adobe.com/devnet-archive/flex/tourdeflex/web/#docIndex=0;illustIndex=0;sampleId =13300
    Click on the 'Get Data' button to fetch the data.
    Bytes transferred - 1440
This is a significant size difference. You may see the data transfer size by using developer tools like the HTTPFox Firefox extension.
Am I missing something here? Any help will be very much appreciated.
Thanks,
Balu

There is definitely problem with your tool or you looked at something else. Please check the attached snapshots of the session using charles capture tool. The response sizes are way bigger than what you mentioned but remoteobjects is almost half of httpservice for the complete transfer including request and response. Check below -
httpservice -
http://tinypic.com/view.php?pic=2q2le2e&s=7
amf -
http://tinypic.com/r/10wmx4o/7

Dump Error while using SSFCOMP_PDF_PREVIEW FM

Hi All,
   While calling the Fm SSFCOMP_PDF_PREVIEW in the purchase order print program ZSAPFM06P (copy of the standard programe) im getting a dump error
Runtime Errors POSTING_ILLEGAL_STATEMENT
Date and Time 11.01.2012 17:31:01
function ssfcomp_pdf_preview.
data: l_dummy type standard table of tline.
clear: pdf_data, pdf_size.
convert otf to pdf
call function 'CONVERT_OTF'
       exporting
            format                = 'PDF'
       importing
            bin_filesize          = pdf_size
            bin_file              = pdf_data
       tables
            otf                   = i_otf[]
            lines                 = l_dummy
       exceptions
            err_max_linewidth     = 1
            err_format            = 2
            err_conv_not_possible = 3
            others                = 4.
if sy-subrc <> 0.
    raise convert_otf_to_pdf_error.
endif.
>>>>>> call screen 0300 starting at 1 1.
Endfunction.
Can any one help me.
Thanks in Advance.

Hi,
Thanks for your reply.
I have created my own smartform for purchase order print & i have copied standard PO Print program and in that i am calling my Z samrtform.
Our Client wants that printpreview and PDF conversion through ME22N. So i have used SSFCOMP_PDF_PREVIEW to full fill my requirement.
Is there any other way to show both preview and able to convert to PDF and storing in local PC if user wants.
Pls help.
Thanks,
Vishnu

Dump :GETWA_NOT_ASSIGNED, while using fm REUSE_ALV_GRID_DISPLAY

Hi Experts,
In the report I am using LDB pnp and outputting results with ALV,
I am using the FM REUSE_ALV_GRID_DISPLAY,
And I am getting the dump GETWA_NOT_ASSIGNED.
The dump I am getting when the FM is executed.
Thanks in Advance.
Regards,
IFF

Hi,
i faced the same problem some days ago.
jst cleck your fieldcat.
check fields names passed to fieldcat and should be in ' ' and in capital.
This shd solve your problem
Thanks & regards

Short Dump TSV_TNEW_PAGE_ALLOC_FAILED while using shared memory objects

Hi Gurus,
We are using shared memory objects to stor some data which we will be reading later. I have implemented the interfce IF_SHM_BUILD_INSTANCE in root class and using its method BUILD for automatic area structuring.
Today our developments moved from dev system to quality system, and while writing the data into the shared memory using the methods ATTACH_FOR_WRITE and DETACH_COMMIT in one report. We started getting the run time error TSV_TNEW_PAGE_ALLOC_FAILED.This is raised when the method DETACH_COMMIT is called to commit the changes in the shared memory.
Everyhting works fine before DETACH_COMMIT. I know that it is happening since the program ran out of extended memory, but I am not sure why it is happening at DETACH_COMMIT call. If excessive memory is being used in the program, this run time error should have been raised while calling the ATTACH_FOR_WRITE method or while filling the root class attributes. I am not sure why it is happening at DETACH_COMMIT method.
Many Thanks in advance.
Thanks,
Raveesh

Hi raveesh,
as Naimesh suggested: Probably system parameter for shared memory area is too small. Compare the system parameters in devel and QA, check what other shared memory areas are used.
Regarding your question, why it does not fail at ATTACH_FOR_WRITE but then on DETACH_COMMIT:
Probably ATTACH_FOR_WRITE will set an exclusive write lock on the shared memory data, then write to some kind of 'rollback' memory and DETACH_COMMIT will really put the data into shared memory area and release the lock. The 'rollback' memory is in the LUW's work memory which is much bigger as the usual shared memory size.
This is my assumption - don't know who can verify or reject it.
Regards,
Clemens

Dump 'LOAD_PROGRAM_NOT_FOUND' while using QM02 and ZXqm02

Similar Messages

Maybe you are looking for