Dump occurs....is it becasue of kernal change ?

Hi,
I got the short dump with Runtime Error
DBIF_RSQL_INVALID_CURSOR
Except. CX_SY_OPEN_SQL_DB
Invalid interruption of a database selection.
Is it possible because kernal change or it's a normal program error?
what is the more possible reason of the dump?
Regards,
Mrunal

Looks like the dump is on select statement where you are using a field in where clause which is not in database table.
I think, it would be nice if you post your dump here (especially code where it is dumped)

Similar Messages

Error occurred during WM processing for posting change delivery

Hi Experts,
I am getting the following error when i try to create Outbound delivery aginst PO.
"L9 612 Error occurred during WM processing for posting change delivery"
Diagnosis
    The indicator AUFER from the delivery type contradicts the
    storage location constellation that was determined by the
    WM system.
    TVLK-AUFER = '<VAR2>'
    WM = '<VAR1>'
1.Purchase order is Stock transport order ME21N ( UB)
2.Try to create Outbound using VL10B and i am getting the above error,
Thanks in advance.
Cheers...Gopi

Hi Gopi,
Looking at problem you discribed, I am assuming you are using the delivery type other than "NL".
The reason for this error is the indicator "order required" in delivery type defination set to 'X : sales order required' and you have assigned this delivery type to the purshasing document UB in STO customising. So the requirement of delivery defination of having prior document as sales order is conflicting.. so the error is there.
Resolution:
Please change the assigned delivery type to NL to purchasing document type UB in SPRO> MM> Purchase order>set up for STO>assign delivery type and checking rule.
If you have custome delivery type the go to spro> LE> shipping>deliveries>define delivery type
change the order required from X to "B".
Hope this will help.
Regards,
Sudhir

Dump occured in Function module: ME_CREATE_PO_HEADER

Dears,
When I call this FM: ME_CREATE_PO_HEADER, the ABAP Dump occured! But any ABAP check to this FM is OK. The information about the dump is below:
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLBOS04" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Function module "ME_CREATE_PO_HEADER" was called
    with the parameter "I_ANGDT".
    This parameter is not defined.
But actually, the parameter 'I_ANGDT' is defined.
Anyone who can help me explain this problem? Thanks!
Best regards,
Brian Liu
Edited by: Brian Liu on Jun 4, 2009 10:02 PM

Hi,
Please check the variable type that you have passed to import parameter I_ANGDT.
Hope this may help you.
Regards,
Prashant

Dump occures when deleting seletion value in selection tab

I created an infospoke and limited one of the fields in the selection tab ( only one plant ).
When I tried to delete the above limit, I was able to activate without errors, execute in background, but not execute dialog. (a dump occurred).
At the Monitor, the extraction ended successfully, But the transformation ended with errors with the message "process was cancelled without additional error message".

Hi Caspi,
Try this and let me know.
Set the filter value for 0RECORDTP (record type) to 1. In this way, all markers are extracted that are in the compressed data from the InfoCube. You can extract non-cumulatives in which you compress the InfoCube in regular intervals and, afterwards, extract with 0RECORDTP = 1.
Thanks
Ramu

OpenDataSet dump occurs...

Hello Members,
I have a problem.
I tried this code on a 4.6C :
OPEN DATASET '/TEST/users.xml'
FOR INPUT IN TEXT MODE "ENCODING DEFAULT
MESSAGE lv_file_error.
mode encoding default.
loop at itab.
    transfer itab to '/TEST/users.xml' LENGTH 100 .
    "MESSSAGE lv_file_error2.
endloop.
close dataset '/ESS/xml_synchro_user/users.xml'.
An dump occurs at the instruction transfer. ST22 shows this message :
An error occurred when writing to the file "/TEST/users.xml".
Error text: "Bad file number"
Error code: 9
What could be the problem ?
Regards,
Aurélien HENRY

Hi I was looking at the code...
ur open data set is '/TEST/users.xml'
transferring to '/TEST/users.xml'
closing '/ESS/xml_synchro_user/users.xml'. <<< you need to close /TEST/users.xml' ...
OPEN DATASET '/TEST/users.xml'
FOR INPUT IN TEXT MODE "ENCODING DEFAULT
MESSAGE lv_file_error.
mode encoding default.
loop at itab.
transfer itab to '/TEST/users.xml' LENGTH 100 .
"MESSSAGE lv_file_error2.
endloop.
close dataset '/ESS/xml_synchro_user/users.xml'.

Automatic email when a dump occured

Hi,
Is there a way to generate an email when a dump happens on an SAP instance.
Thanks

I have the same problem.
I want to create an email when a dump occured.
In RZ20,I assigned the method CCMS_OnAlert_Email as
autoreaction method to the MTE class R3AbapShortdumps.
I configured the method with SENDER,RECIPIENT etc.
'Execute method' on is set to 'the local server of the MTE to be prcessed'.
When a short-dump occured,the view 'Status Autoreaction' shows 'checked Run required',
but no Email is sent.When I start the method manually (edit->nodes->start method,the
email appears.
What did I forget or what's wrong ?
regards
Franz Wirtz

Dump occured in standard program SAPMV45A (order creation)

hi,
In order creation, a dump is occured in standard program SAPMV45A. Because of in FM "Pricing_Dialog_Tabstrips" is incorrect and TAXI_TABSTRIP_C and TAXI_TABSTRIP_ITEM" specified here is a different field type.This is standard program we can not change field type. Kindly provide any OSS notes for this or any other solution.
STANDARD PROGAM - SAPMV45A
INCLUDE PROGRAM - MV45AF0F_FCODE_PKO4
ERROR - Runtime Error CALL_FUNCTION_CONFLICT_TYPE has occurred
Kindly help me, Its very uigent
thanks in advance.

hi
Please note SAP redesigned the condition screen and it's
underlaying logic completely starting with release 4.6A.
Hence you should not use the function codes PKON and KKON any longer.
Furthermore screen 6201 and all includes stored in program pool SAPMV61A
are not used by the standard any more. The new condition sub-screen
is placed in program pool SAPLV69A and triggered by function
codes KKO1 (= jump into header condition screen) or PKO1 (= jump into
item condition screen). Further details you can find in the SAP
note 360942.
So, In release 470 & above , function code PKON to display the conditions in a
sales order via VA01, VA02 and VA03 may lead this short dump. To avoid
this short dump, I recommend you to use the function code PK01 instead
Hope this helps
Paul Quinn

How to catch a dump occured on backend(a remote system) from frontend

Hi All,
    I have a specific requirement wherein, i should be able to catch the dump/any system error occured on a backend system and i need to display a message in a proper format instead of showing the actual dump. I communicate with backend( R/3 4.7) from webdynpro for abap using RFC call. If anyone has any clue regarding this please reply..
Thanks in advance
Ashok

Hi Ashok,
This is very simple. Return error messages from RFC if any now in web dynpro handle those error messages using the message manager call method REPORT_ERROR_MESSAGE.
Check the sample code below.
call function BAPI_XXXXXXX
importing
     et_error = lt_error.
get message manager
DATA lo_api_controller     TYPE REF TO if_wd_controller.
DATA lo_message_manager    TYPE REF TO if_wd_message_manager.
lo_api_controller ?= wd_this->wd_get_api( ).
CALL METHOD lo_api_controller->get_message_manager
    RECEIVING
      message_manager = lo_message_manager
Loop at lt_error into ls_error.
report message
CALL METHOD lo_message_manager->report_error_message
    EXPORTING
      message_text              = ls_error-message
     params                    =
     msg_user_data             =
     is_permanent              = ABAP_FALSE
     scope_permanent_msg       = CO_MSG_SCOPE_CONTROLLER
     view                      =
     show_as_popup             =
     controller_permanent_msg =
     msg_index                 =
     cancel_navigation         =
     enable_message_navigation =
receiving
   message_id                =
endloop.

Downlaod ALV report output to excel,Dump occurs

Hi All,
When i am trying to download the ALV output data to excel thorugh export button in tool bar,,,,it is giving a dump..
Why it is so...it is the characteristic of ALV...?Where can be the problem?
Thanks in Advance
S@chin

DUMP description
Short text
    Field symbol has not yet been assigned.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLKKBL" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 103).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.

Dump occuring in background

hello,
i am getting a dump while executing a custom program in background. I use "Reuse_alv_grid_display" and everything works fine in foreground . While executing the program in background, i get dump - GETWA_NOT_ASSIGNED. To the best of my knowledge, the dump is occuring because of some blank field catalog values. The fields in field cataog and table are different. Example. there are 20 fields in field catalog and 25 fields in the internal table structure. I am assuimg that this to be the reason for the dump. My concern is, if that is the reason for the dump then why is it not occuring in foreground and only in background.
Can someone help pls?
Thanks,
Prem

Hi,
Please find below the layout properties
u_lf_layout-box_fieldname       = 'SELK'.
u_lf_layout-zebra               = ' '.
u_lf_layout-zebra               = ' '.
u_lf_layout-get_selinfos        = 'X'.
u_lf_layout-f2code              = 'BEAN' .
u_lf_layout-confirmation_prompt = 'X'.
u_lf_layout-key_hotspot         = 'X'.
u_lf_layout-info_fieldname      = 'COL'.
This is not OOPS alv . I am using REUSE_ALV_GRID_DISPLAY to display the output. I am filling the field catalog and then passing the internal table (T_DATA)to this FM. The no. of fields is higher in the internal table when compared to the list of fields in field catalog but in foreground i do not receive this dump.Do you want me to share all the field details as well?
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_buffer_active         = 'X'
      i_callback_program      = 'Z_SD_SALESDISP'
      i_callback_user_command = 'USER_COMMAND'
      i_background_id         = 'ALV_BACKGROUND'
      is_layout               = l_layout
      it_fieldcat             = l_fieldcat
      i_save                  = 'A'
      is_variant              = is_variant
    TABLES
      t_outtab                = t_data
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
Thanks,
Prem

In alv , dump occurs , while sorting the alv .

Hi,
In Alv , sorting is working fine before we selecting a row . After seleting the row , if we are sorting it is going to dump .
Dump Message:
The following error text was processed in the system xxx : Adapter error in &VIEW_ELEMENT_TYPE& "OJTXP" of view "Zzzzz.VW_TEST": Context binding of property TEXT cannot be resolved: Lead selection not set for context node VW_TEST.1.ALV_TRF_DET
The error occurred on the application server plmdev_PLD_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE_FOR of program CX_WDR_ADAPTER_EXCEPTION======CP
Method: RAISE_BINDING_EXCEPTION of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
Method: GET_BOUND_ELEMENT of program CL_WDR_VIEW_ELEMENT_ADAPTER===CP
How to resolve this error ?.
Regars,
Rani.

Do you have child node under the context node that is bound to the ALV? This is generally the most common cause of such an error. Structures such as this are not supported for the reasons supplied in this help link:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/42/b9ea094f4a3118e10000000a1553f7/frameset.htm
Be sure and read the section "Important Exception: Sorting"

I have an old ipod i just got the new iphone 4s but the songs that are on my ipod are not on my itunes how can i transfer them from my old ipod to my itunes. reason they are not on my itunes becasue i've change computer also and didn't a file transfer bef

i just purchase the new iphone 4s. I also have an old ipod with a lot on songs which are not on my itunes becasue i didn't do a file transfer when i got my new computer a ew months ago. How can i add my songs from the old ipod to my itunes.

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

ABAP Short Dump Occurring

Hi All
We had do done a DBEXPORT of our R/3 4.6C while doing there was a increment conversion pending and we got error during the export, we finished the conversion and then started the DBEXPORT again and it completed successfully, however after this we are receiving ABAP Short dumps which says DBIF_RSQL_INTERNAL_ERROR, Internal error when accessing table "T179 ". Practically for any new entry we do in database.Kindly suggest how to go about.
Regards
Arun

Hi Micheal
we had done an incremental conversion for DBTABLOG table which is forbidden also was not complete,so we completed the conversion and removed a field which was added in the table (this was cause of error),we removed the field and activated teh table and the short dump was resolved.
Anyway thanks for your reply.
Arun

Error occur on forms server 6i while Changing alert's property

hello.........
I had changed font and alert icon and alert's property from oracle terminal
and i changed FMRUSW.RES in this resource file from oracle terminal
because i want to change all form's property.
but now my server is giving an error message
'FRM-92050: Failed to connect to the Server' Error When Accessing
so what i have to do to resolve this error?
and why server is giving this error message?
waiting for reply..............

sorry, its not reply its a request
how i can open the recourse file (run oracle terminal 6 i cant run it)

Time_Out dumps occurred frequently with generic users

Hello Experts,
We are getting daily 10-15 Time_out dumps with SOLMAN_BTC and SM_EFWK users.
Can you please some one provide suggestions on this to resolve the issue.
Thanks in advance....
Rgds,
Venkat

Hi Venkat,
Pls refer below links for similar error,
Report CL_SQL_RESULT_SET=============CP
ABAP Keyword Documentation
Runtime Errors : TIME_OUT (The program "CL_SQL_STATEMENT==============CP" has exceeded the maximum permitted runtime)
Regards
K.N

Dump occurs....is it becasue of kernal change ?

Similar Messages

Maybe you are looking for