Dump while running payroll

Dear Expert,
Please correct if i am wrong.
We always run payroll with Log only.It does not matter,we are running in test mode or in live run.
Now in my current situation,, when i am running payroll for 2500 emp, system is giving dump stating that no memory location.
Then basis guy increase the memory allocation, but still giving the error.
Now my basis guy said that, you have to run payroll in background.
SO how should i go now.
Request to all experts, please share some information on this.
Regards,
sharma

Dear Remi,
Thanks a lot for reply on the same.
Yes i run payroll without log.and also that time its working fine.
I request to you,, please advice me we should run payroll with log or without log in simulation as well in Live run.
Accordingly i update you by checking all the things.
Regards,
sharma

Similar Messages

  • Short dump while running Payroll

    Dear Experts,
    I am getting short dump while running the payroll for around 150 employees, but am not able to see the short dump also as it says that "process terminated".
    please help me in this regard and also let me know if there could be any configuration errors.
    Regards
    Shansar

    Thank you all for the response.
    The issue has been resolved.  i have learnt that log field should not be flagged when you are executing payroll for more than 50 employees.
    Regards
    Shansar

  • While running payroll i am getting an error saying  no currency in tabl

    hai frined,
    iam facing a problem while running payroll
    no currency in t100p table
    any help plz
    kumari

    hai..
    try copying a sample entry already existing for the respective country and re name it...
    U will not get the ERROR

  • ABAP dump while running the tcode MIGO

    Hi All,
    I am getting the abap dump while running the tcode MIGO when I searched I got two relevant sap notes but our functional team said that its not applicable in our case.
    Please find the details of ST22 analysis-:
    Runtime Errors         MESSAGE_TYPE_X
    Date and Time          17.04.2009 13:18:45
    Short text
         The current application triggered a termination with a short dump.
    What happened?
         The current application program detected a situation which really
         should not occur. Therefore, a termination with a short dump was
         triggered on purpose by the key word MESSAGE (type X).
    Error analysis
        Short text of error message:
        No RFC destination is defined for SAP Global Trade Services
        Long text of error message:
        Technical information about the message:
        Message class....... "/SAPSLL/PLUGINR3"
        Number.............. 002
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    How to correct the error
        Probably the only way to eliminate the error is to correct the program.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "MESSAGE_TYPE_X" " "
        "SAPLMBWL" or "LMBWLU21"
        "MB_POST_GOODS_MOVEMENT"
    SAP Notes i have reffered 1098491, 1041122
    Currently we are running on SAP_APPL     600     0007     SAPKH60007     
    Regards,
    Prashant

    Hi Rohit,
    This particular note is valid for
    Support
    Packages Release Package
    Name
    PI 2004_1_46B SAPKIPZI38
    PI 2004_1_46C SAPKIPZI48
    PI 2004_1_470 SAPKIPZI58
    PI 2004_1_500 SAPKIPZI68
    Our system is running on PI_BASIS     2006_1_700     0005     SAPKIPYM05
    Pls suggest.
    Regards,
    Prashant

  • Core dump while running jmf application

    I am running a bit customised version of Transcode & Concat from JMF samples as a single application on Solaris 10.
    I got core dump while running the application.
    Any clue ?
    Below are the content from hs_err_pid#.out file.
    +#+
    +# An unexpected error has been detected by HotSpot Virtual Machine:+
    +#+
    +# SIGSEGV (0xb) at pc=0xfecaa04c, pid=23754, tid=97822+
    +#+
    +# Java VM: Java HotSpot(TM) Server VM (1.5.0_11-b03 mixed mode)+
    +# Problematic frame:+
    +# V [libjvm.so+0x4aa04c]+
    +#+
    ---------------  T H R E A D  ---------------
    +Current thread (0x05b62e40):  JavaThread "Loop thread: com.sun.media.parser.audio.WavParser$WavTrack@8d6f11" [_thread_in_vm, id=97822]+
    siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0x00000000
    Registers:
    O0=0x00008000 O1=0x00000b90 O2=0x016d8b90 O3=0xff02d024
    O4=0x0000942c O5=0x00009400 O6=0xbfa7f1e0 O7=0x00009400
    G1=0x00000000 G2=0x000077bc G3=0x00000000 G4=0x80000000
    G5=0x00000006 G6=0x00000000 G7=0xae787200 Y=0x00000000
    PC=0xfecaa04c nPC=0xfecaa050
    Top of Stack: (sp=0xbfa7f1e0)
    +0xbfa7f1e0: ff02d02c 00000002 00001ffc 00000001+
    +0xbfa7f1f0: fefd8000 ff02d028 00008800 ff03106c+
    +0xbfa7f200: ff02d9e4 00000000 00000000 05b62e40+
    +0xbfa7f210: 00008374 00009638 bfa7f240 bfd04dc4+
    +0xbfa7f220: 00000000 00000000 00000000 00000000+
    +0xbfa7f230: 00000000 00000000 00000000 00000000+
    +0xbfa7f240: feca9f1c 00007fec 00000006 00034cb8+
    +0xbfa7f250: 00000005 00000002 01000000 006d81a8+
    Instructions: (pc=0xfecaa04c)
    +0xfecaa03c: 7f f8 86 38 90 10 00 1b 8a 10 20 06 ca 26 e0 e4+
    +0xfecaa04c: ec 06 60 00 fa 05 a0 08 80 a7 60 00 02 40 00 11+
    Stack: [0xbfa00000,0xbfa80000),  sp=0xbfa7f1e0,  free space=508k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    +V  [libjvm.so+0x4aa04c]+
    +C  [libjmmpa.so+0x4dcc] Java_com_sun_media_codec_audio_mpa_NativeEncoder_nFlush+0x1c+
    +j  com.sun.media.codec.audio.mpa.NativeEncoder.nFlush(I[B)I+0+
    +j  com.sun.media.codec.audio.mpa.NativeEncoder.nFlush(I[B)I+0+
    j  com.sun.media.codec.audio.mpa.NativeEncoder.process(Ljavax/media/Buffer;Ljavax/media/Buffer;)I20+
    v  ~C2IAdapter
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.SourceThread.process()Z
    J  com.sun.media.util.LoopThread.run()V
    v  ~I2CAdapter
    v  ~StubRoutines::call_stub
    +V  [libjvm.so+0x19b95c]+
    +V  [libjvm.so+0x2c1a24]+
    +V  [libjvm.so+0x2e1010]+
    +V  [libjvm.so+0x2dcbac]+
    +V  [libjvm.so+0x67a7e0]+
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    +j  com.sun.media.codec.audio.mpa.NativeEncoder.nFlush(I[B)I+0+
    j  com.sun.media.codec.audio.mpa.NativeEncoder.process(Ljavax/media/Buffer;Ljavax/media/Buffer;)I20+
    v  ~C2IAdapter
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.BasicFilterModule.process()V
    J  com.sun.media.SourceThread.process()Z
    J  com.sun.media.util.LoopThread.run()V
    v  ~I2CAdapter
    v  ~StubRoutines::call_stub
    ---------------  P R O C E S S  ---------------
    Java Threads: ( => current thread )
    +0x0557db38 JavaThread "Thread-3024" [_thread_blocked, id=97827]+
    +0x05390a28 JavaThread "Loop thread" [_thread_blocked, id=97823]+
    +=>0x05b62e40 JavaThread "Loop thread: com.sun.media.parser.audio.WavParser$WavTrack@8d6f11" [_thread_in_vm, id=97822]+
    +0x05725a68 JavaThread "JMF thread: SendEventQueue: com.sun.media.ProcessEngine" [_thread_blocked, id=97814]+
    +0x05303e38 JavaThread "JMF thread: SendEventQueue: com.sun.media.processor.unknown.Handler" [_thread_blocked, id=97813]+
    +0x053d6848 JavaThread "Loop thread" [_thread_blocked, id=97812]+
    +0x05b8d508 JavaThread "RawBufferStream Thread" [_thread_blocked, id=97811]+
    +0x04a957b8 JavaThread "JMF thread: SendEventQueue: com.sun.media.ProcessEngine" [_thread_blocked, id=97806]+
    +0x0573c8a0 JavaThread "JMF thread: SendEventQueue: com.sun.media.processor.unknown.Handler" [_thread_blocked, id=97805]+
    +0x04be2248 JavaThread "Keep-Alive-Timer" daemon [_thread_blocked, id=97804]+
    +0x00189ea0 JavaThread "Timer-1" daemon [_thread_blocked, id=38]+
    +0x00e2d5f8 JavaThread "OamBus" daemon [_thread_in_native, id=26]+
    +0x00e5d168 JavaThread "Dispatcher-Thread-3" daemon [_thread_blocked, id=25]+
    +0x00c972b8 JavaThread "Thread-2" [_thread_blocked, id=20]+
    +0x00c4e9b0 JavaThread "RMI TCP Accept-19912" daemon [_thread_in_native, id=18]+
    +0x00c56c90 JavaThread "RMI TCP Accept-0" daemon [_thread_in_native, id=17]+
    +0x00c51da0 JavaThread "Timer-0" daemon [_thread_blocked, id=16]+
    +0x001ae158 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=15]+
    +0x001ac898 JavaThread "CompilerThread1" daemon [_thread_blocked, id=14]+
    +0x001aba20 JavaThread "CompilerThread0" daemon [_thread_blocked, id=13]+
    +0x001aab08 JavaThread "AdapterThread" daemon [_thread_blocked, id=12]+
    +0x001a9d68 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=11]+
    +0x001a90d8 JavaThread "Surrogate Locker Thread (CMS)" daemon [_thread_blocked, id=10]+
    +0x0019c718 JavaThread "Finalizer" daemon [_thread_blocked, id=9]+
    +0x0019c1d8 JavaThread "Reference Handler" daemon [_thread_blocked, id=8]+
    +0x0003b260 JavaThread "main" [_thread_blocked, id=1]+
    Other Threads:
    +0x0019a0f8 VMThread [id=7]+
    +0x00c55fe0 WatcherThread [id=19]+
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    par new generation   total 24512K, used 3242K [0xd4800000, 0xd6000000, 0xd6000000)
    eden space 24448K,  13% used [0xd4800000, 0xd4b2aa50, 0xd5fe0000)
    from space 64K,   0% used [0xd5fe0000, 0xd5fe0000, 0xd5ff0000)
    to   space 64K,   0% used [0xd5ff0000, 0xd5ff0000, 0xd6000000)
    concurrent mark-sweep generation total 499712K, used 263197K [0xd6000000, 0xf4800000, 0xf4800000)
    concurrent-mark-sweep perm gen total 50712K, used 30431K [0xf4800000, 0xf7986000, 0xf8800000)
    Dynamic libraries:
    +0x00010000      /usr/jdk/instances/jdk1.5.0/bin/java+
    +0xff390000      /usr/lib/libthread.so.1+
    +0xff360000      /usr/lib/libdl.so.1+
    +0xff200000      /usr/lib/libc.so.1+
    +0xff380000      /platform/SUNW,Netra-440/lib/libc_psr.so.1+
    +0xfe800000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/server/libjvm.so+
    +0xff300000      /usr/lib/libsocket.so.1+
    +0xff330000      /usr/lib/libsched.so.1+
    +0xff1c0000      /usr/lib/libCrun.so.1+
    +0xff190000      /usr/lib/libm.so.1+
    +0xff080000      /usr/lib/libnsl.so.1+
    +0xfe700000      /usr/lib/libm.so.2+
    +0xff160000      /usr/lib/libscf.so.1+
    +0xff140000      /usr/lib/libdoor.so.1+
    +0xff060000      /usr/lib/libuutil.so.1+
    +0xfe7d0000      /usr/lib/libgen.so.1+
    +0xfe6d0000      /usr/lib/libmd.so.1+
    +0xfe6b0000      /platform/SUNW,Netra-440/lib/libmd_psr.so.1+
    +0xfe690000      /usr/lib/libmp.so.2+
    +0xfe650000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/native_threads/libhpi.so+
    +0xfe5c0000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libverify.so+
    +0xfe580000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libjava.so+
    +0xfe560000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libzip.so+
    +0xfe410000      /usr/lib/locale/en_US/en_US.so.3+
    +0xfe310000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libmanagement.so+
    +0xfe250000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libnet.so+
    +0xcc450000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libj2pkcs11.so+
    +0xcc410000      /usr/lib/libpkcs11.so+
    +0xcc3f0000      /usr/lib/libcryptoutil.so.1+
    +0xcc340000      /usr/lib/security/pkcs11_softtoken.so+
    +0xcc3d0000      /opt/tib/EAG/tibrv/lib/libtibrvj.so+
    +0xcc310000      /opt/tib/EAG/tibrv/lib/libtibrvcmq.so+
    +0xcc250000      /opt/tib/EAG/tibrv/lib/libtibrvcm.so+
    +0xcc230000      /opt/tib/EAG/tibrv/lib/libtibrvft.so+
    +0xcc110000      /opt/tib/EAG/tibrv/lib/libtibrv.so+
    +0xccbf0000      /usr/lib/libpthread.so.1+
    +0xcc210000      /usr/lib/libkstat.so.1+
    +0xcc050000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libnio.so+
    +0xcc030000      /usr/lib/librt.so.1+
    +0xcc010000      /usr/lib/libaio.so.1+
    +0xc0680000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libawt.so+
    +0xc0500000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libmlib_image.so+
    +0xcb920000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/headless/libmawt.so+
    +0xcb850000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libjmutil.so+
    +0xbfd80000      /usr/lib/libX11.so.4+
    +0xcb810000      /usr/openwin/lib/libXext.so.0+
    +0xbfd00000      /usr/jdk/instances/jdk1.5.0/jre/lib/sparc/libjmmpa.so+
    VM Arguments:
    jvm_args: -DappInstanceId=19912 -DsocketCountPorts= -Dlog4j.configuration=DCL_BusListener-19912-5.1.2-log4j.xml -Dcfg.uri=/u01/home/ihome/ops/Server/cfg/dcl_bus_responder.xml -Dcom.sun.xml.namespace.QName.useCompatibleSerialVersionUID=1.0 -Dcom.sun.management.jmxremote.port=19912 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Djava.awt.headless=true -Dargos.group=VMABusListener -Dspring.bootstrap=spring/VoiceMailAdapter/dcl/DCLSpringBootstrapContext.xml -Xmx512m -Xms512m -verbose:gc -XX:PrintGCDetails -XX:+PrintGCApplicationConcurrentTime -XX:+PrintGCApplicationStoppedTime -XX:MaxNewSize=24m -XX:NewSize=24m -XX:+UseParNewGC -XX:+CMSParallelRemarkEnabled -XX:+UseConcMarkSweepGC -XX:CMSInitiatingOccupancyFraction=60+
    Launcher Type: SUN_STANDARD
    Environment Variables:
    JAVA_HOME=/usr/jdk/latest
    PATH=/usr/jdk/latest/bin:/usr/local/bin:/usr/jdk/latest/bin:/usr/local/bin:/usr/sbin:/usr/bin:/usr/sfw/bin:/opt/sfw/bin:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/sadm/bin:/usr/proc/bin:/opt/tib/EAG/tibrv:.:/u01/home/ihome/.bin:/usr/sfw/bin:/opt/tib/EAG/tibrv/bin:/u01/app/oracle/product/10.2.0/db10g/bin:/opt/tib/EAG/tibrv:.:/u01/home/ihome/.bin:/usr/sfw/bin:/opt/tib/EAG/tibrv/bin:/u01/app/oracle/product/10.2.0/db10g/bin
    LD_LIBRARY_PATH=/usr/jdk/instances/jdk1.5.0/jre/lib/sparc/server:/usr/jdk/instances/jdk1.5.0/jre/lib/sparc:/usr/jdk/instances/jdk1.5.0/jre/../lib/sparc:/opt/tib/EAG/tibrv/lib:/opt/tib/EAG/tibrv/lib
    SHELL=/usr/bin/bash
    Signal Handlers:
    +SIGSEGV: [libjvm.so+0x709bb4], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
    +SIGBUS: [libjvm.so+0x709bb4], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
    +SIGFPE: [libjvm.so+0x274474], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c+
    SIGPIPE: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
    +SIGILL: [libjvm.so+0x274474], sa_mask[0]=0xffbffeff, sa_flags=0x0000000c+
    SIGUSR1: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGUSR2: SIG_DFL, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGHUP: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
    SIGINT: SIG_IGN, sa_mask[0]=0x00000000, sa_flags=0x00000000
    +SIGQUIT: [libjvm.so+0x67bb74], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
    +SIGTERM: [libjvm.so+0x67bb74], sa_mask[0]=0xffbffeff, sa_flags=0x00000004+
    ---------------  S Y S T E M  ---------------
    OS:                       Solaris 10 11/06 s10s_u3wos_10 SPARC
    Copyright 2006 Sun Microsystems, Inc.  All Rights Reserved.
    Use is subject to license terms.
    Assembled 14 November 2006
    uname:SunOS 5.10 Generic_127111-11 sun4u  (T2 libthread)
    rlimit: STACK 8192k, CORE infinity, NOFILE 65536, AS infinity
    load average:9.45 9.59 9.62
    CPU:total 4 has_v8, has_v9, has_vis1, has_vis2, is_ultra3
    Memory: 8k page, physical 16777216k(6702928k free)
    vm_info: Java HotSpot(TM) Server VM (1.5.0_11-b03) for solaris-sparc, built on Dec 15 2006 01:18:11 by unknown with unknown Workshop:0x550

    Hello captfoss!
    The Linux video drivers are buggy. If you give them video they don't like, they crash.You seem to repeat this statement quite often......but I don't think s/he is using Linux. S/He is using Solaris10 !!!
    I don't know if Linux and Solaris are same OS.............
    Thanks! And please don't take it as a comment! :-)

  • How to allow application access to particular User while running payroll

    Guys,
    We are using Oracle Co-Hrms and payroll application and running fine,but one majore problem we face in every payroll,while running the payroll if any employee profile opened by any user ,which is inculde in assignment set of running payroll then system take much time,Howevery,rightnow we inform to whole department to don't use hrms between x to y time,but it is not effectivey properly and also not propery way according to this big Application "Oracle E-Business Suit,i think,there must be an opetion to cover this problem,
    Is there any possibilit to locke all of the user temporary excep one to two user,who work on Salary Process(payroll).
    Please advice
    thanks

    Thanks for reploy,
    The way you have defined is better to avoide this issue,could you please tell me one thing,is there any request in application to disconnect all the user forcely on the spot who are connected and allow again to login in application only thoes user who have System Administator Responsibility,
    --thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Error while running payroll

    Dear All,
    While running the payroll,error  like Assignment to feature 40EPF did not take place appears.
    Current month (i.e. June 2011 PF is not deducting).whereas the PF arrears is deducted for April'11 and May'11.
    In error screenshot it is showing as
    K1 &ABRKS=D1, <- D1 for employee subgroup K1
    K2 &ABRKS=D1, <- D1 for employee subgroup K2
    K3 &ABRKS=D2, <- D2 for employee subgroup K3
    &ABRKS=D0, <- D0 for all other employee subgroups
    If you now create employee subgroup K4 and the default entry ** is missing, the system is unable to find a decision option for payroll area ABKRS.
    Procedure
    Define a decision option for K4 or for default value **.
    I am unable to understand y this error is cmg when 40epf is set proprly

    Dear All,
    Due to some changes in Income tax in  the previous records (The 2 employees  mentioned below were inPA 4000 during 01.04.2011 to 30.09.2011) and now they are in PA 2600 pertaining to Pay Roll Area 24 (Pondy API & Pilot Plant)
    Pay roll run processed for11th Period ( February 2012) and the error appears as follows
    u2022     2 employees found error  Assignment to feature 40EPF did not take place appears.  
    u2022     PF arrear amount showing negative value
    Awaiting for your valuable replies
    Regards,
    Pinky

  • Dump while running a stock report for one year

    hi experts,
                        i'm getting  dump error while running a stock summary report for one year
            the error is as follows:
      A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the
       exception
      condition "CNTL_ERROR".
    regards,
    andrews.

    Hi Andrew,
    Did you try running the report for a smaller period of maybe a month. Check for any authorisation related issues.
    The dump has a lot of detailed and valuable information about the error. If feasible, post the dump data for further analysis.
    Regards,
    Pranav.
    Edited by: Pranav Mandelia on Sep 6, 2011 2:07 PM

  • Run time error while running payroll simulation

    Dear All SAP HR experts,
    I am getting an error in QA Server, This occurs whenever I run payroll simulation for an employees  getting an error dump i.e .."TABLE_FREE_IN_LOOP" . The transaction code for which I am getting error is PC00_M40_CALC_SIMU.
    Attached is the dump for reference.
    Trigger Location of Runtime Error
        Program                                 SAPLRPIB
        Include                                 LRPIBU01
        Row                                     165
        Module type                             (FUNCTION)
        Module Name                             RP_FILL_WAGE_TYPE_TABLE
    Please help in this regard.
    Thanks
    Srini

    function module RP_FILL_WAGE_TYPE_TABLE
    is generally used for reading the wage type assigned for indirect valuation (INVAL A,B,C,D)
    check whether you are using any Z function in your payroll schema which might be giving problem
    Also check with your basis guys whether QA server has any memory issues.
    Regards
    Sumit Pradhan.

  • DUMP while running the program RSAR_RSISOSMAP_REPAIR

    Hi Experts,
    I am facing the dump while executing the DTP. the dump is ITAB_DUPLICATE_KEY.to fix the error  ITAB_DUPLICATE_KEY I am referring to the below link :
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04c82eb-ec7c-2c10-7fae-ca6e764c483a&overridelayout=true
    i have run the program RSAR_RSISOSMAP_REPAIR with the repair indicator set.
    the issue is its not executing successfully.kinldy help me in this.
    the abap errror i m getting while execution of program RSAR_RSISOSMAP_REPAIR is as :
    TSPREFIX for TCD500-1 not found.
    Kindly help me in resolving the above error TSPREFIX for TCD500-1 not found, where TCD500-1 is my development R/3 system .
    Kindly advise.
    thanks & regards ,
    M.S
    Edited by: M.S on Dec 9, 2009 6:41 AM

    Hi,
    1) TCD for testing transactions, especially those that do not use controls
    2)TCD has the following advantages
    3)It has a built in screen simulation for standard screen element
    4) No GUI is required for playback
    5)  It is suitable for load testing
    6) The TCD command has the same limitations as the CATT function of the same name. The flow of data to and from controls, as well as screen input values, are recorded. When the test script runs, the controls are deactivated and the user's actions are simulated by reading the recorded data flows
    For more info on TCD go through the below link
    http://help.sap.com/saphelp_sm32/helpdata/en/83/77cd3b4261706fe10000000a11402f/content.htm
    Regards,
    Marasa.

  • Short Dump While Running infopackage

    Hello All,
    While Running infopackae for Master data i am getting a dump MESSAGE_TYPE_X" C
    CL_RSDMD_UPDATE_MASTER_DATA===CP" or "CL_RSDMD_UPDATE_MASTER_DATA===CM00R"
    CHECKDATA_PACKET".
    Data is comming to PSA without any Errors,But while loading to Infoobject Table i am getting the Dump.
    What can be the problem?

    Hi,
    Force the request to red and reload to PSA first and then to target manually.
    When the load is not getiing processed due to huge volume of data, or more number of records per data packet, Please try the below option.
    1) Reduce the IDOC size to 8000 and number of data packets per IDOC as 10. This can be done in info package settings.
    2) Run the load only to PSA.
    3) Once the load is succesfull , then push the data to targets.
    In this way you can try to overcome this issue.
    Thanks,
    JituK

  • Short dump while running Alert Monitor

    Hi,
    I am getting a short dump while determining alert in Alert Monitor through T. Code /SAPAPO/AMON1. The error says as below:
    Runtime Errors         BCD_NO_SIGN
    Short text : A packed number contains no sign.
    What happened? : Error in the ABAP Application Program, The current ABAP program "SAPLKKBL" had to be terminated because it has come across a statement that unfortunately cannot be executed.       
    Information on where terminated : Termination occurred in the ABAP program "SAPLKKBL" - in "FB_OUTTAB_SORT2".

    Hi Axon Generic,
    Please checkon the following
    1) In the overall profile of alert monitor, check the relative
    time interval whether specified correctly
    2) Under the alert profile in Overall profile, check the
    threshold values are defined correctly
    3) Check the SAP Note 151709 , 189061
    Please confirm your findings.
    Regards
    R. Senthil Mareeswaran.

  • Dump while running report in background

    Hi Experts,
    I have created one report to create the conditions record by using BDC. The program is uploading the data from file which is located at local server and at selection screen, path of file is defined.
    When i run the report in foreground it works fine, first it uploaded that data and then created BDC and record saved successfully.  But if i run the program in background and check the job status through SM37 , job get canceled due to the dump. The dump message is "Exception condition "NO_BATCH" raised."
    The FM which i am using currently in my code to upload the data is "GUI_UPLOAD", i tried the same thing with FM "ALSM_EXCEL_TO_INTERNAL_TABLE" as well, but same dump is coming.
    Please advice if anyone have some solution.
    Thanks & Regards,
    Swati

    Hi,
    The FM GUI_UPLOAD, wont work in the background jobs. This is the reason for the dump.
    As the backround job runs at the application server, the program cannot identidy the presentation server (local system) file path.
    To avoid this store and read file from application server.
    Thanks & Regards,
    Navneeth K.

  • Error - While running Payroll Simulation After HR Patch Update

    Dear Gurus,
    Below is the system Information
    OS : AIX
    DB : Oracle 10 g
    Current Patch Level : HR : SAPKE60471 (Old was SAPKE60453)
    Basis Patch Level : SAPKB70115 (Old was SAPKB008)
    Now at old patch level payroll simulation was running fine and with no problem.
    We update patches related to HR & Basis.
    After that we are getting error in simulation of payroll which is attached here with.
    Please let me have any solution.
    This is our quality server. We apply patch for calculation tax rebate of Rs. 2000 for employees earning less then 500000 INR / year.

    Hi Irin,
    The error says there is not entry in table V_T511K for country grouping 40 for Constant "S80EM"
    Employee contribution % NPS.
    All you need to do is
    Go to V_T511K -> Country Grouping 40-> Create a Constant S80EM- and enter the constant value in the last column-> Run the payroll again.
    Regards,
    Hari

  • Dump while running MRP: MD03:   PERFORM_CONFLICT_TAB_TYPE CX_SY_DYN_CALL_IL

    Dear All,
    I am trying to run MRP for a single item at a single level. The program is giving a dump.
    If anyone knows a way around kindly tell me.
    Thanks. Anu.
    SHORT DUMP:
    Runtime errors         PERFORM_CONFLICT_TAB_TYPE                                         
    Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE                                       
           Occurred on     28.02.2008 at   12:19:49                                                                               
    Illegal type when passing an internal table to a FORM                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLEINU" had to be terminated because one of the              
    statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                    
    A FORM was called incorrectly.                                                                               
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                 
    and make a note of the actions and input that caused the                                 
    error.                                                                               
    To resolve the problem, contact your SAP system administrator.                           
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer                 
    termination messages, especially those beyond their normal deletion                     
    date.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                 
    . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',           
    was neither                                                                             
    caught nor passed along using a RAISING clause, in the procedure                         
    "ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"                                                   
    Since the caller of the procedure could not have expected this exception                 
    to occur, the running program was terminated.                                           
    The reason for the exception is:                                                         
    Incorrect FORM call.                                                                     
    The FORM call is incorrect for parameter number 1.                                       
    The current internal table passed to the formal table parameter has                      
    a type that is not compatible with the type of the formal parameter.                     
    The condition selected below has been violated:                                                                               
    (" ") The access types defined for the tables are incompatible.                          
          The following hierarchy shows the compatibility rules:                                                                               
    ANY_TABLE                                                                               
                        INDEX_TABLE   HASHED_TABLE                                           
                STANDARD_TABLE    SORTED_TABLE                                                                               
    A concrete access type is only compatible with types higher                        
          in the hierarchy. For example, STANDARD_TABLE is compatible                        
          with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.                                                                               
    ("X") The line types of the tables are incompatible.                                                                               
    (" ") The table keys of the tables are not identical.                                                                               
    (" ") One of the tables has a UNIQUE key, but the other has a                            
          NON-UNIQUE key.                                                                               
    How to correct the error                                                                               
    The exception must either be prevented, caught within the procedure                      
    "ME_UPDATE_AGREEMENT_PO"                                                                
    "(FUNCTION)", or declared in the procedure's RAISING clause.                             
    To prevent the exception, note the following:                                                                               
    You may able to find an interim solution to the problem                                  
    in the SAP note system. If you have access to the note system yourself,                  
    use the following search criteria:                                                                               
    "PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC                                 
    "SAPLEINU" or "LEINUU04"                                                                 
    "ME_UPDATE_AGREEMENT_PO"                                                                 
    If you cannot solve the problem yourself, please send the                                
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                                
       To obtain this, select the "Print" function on the current screen.                       
    2. A suitable hardcopy prinout of the system log.                                           
       To obtain this, call the system log with Transaction SM21                                
       and select the "Print" function to print out the relevant                                
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,                          
       supply the source code.                                                                  
       To do this, you can either use the "PRINT" command in the editor or                      
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred                          
       or which actions and input led to the error.

    Dear All,
    I am trying to run MRP for a single item at a single level. The program is giving a dump.
    If anyone knows a way around kindly tell me.
    Thanks. Anu.
    SHORT DUMP:
    Runtime errors         PERFORM_CONFLICT_TAB_TYPE                                         
    Exception              CX_SY_DYN_CALL_ILLEGAL_TYPE                                       
           Occurred on     28.02.2008 at   12:19:49                                                                               
    Illegal type when passing an internal table to a FORM                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLEINU" had to be terminated because one of the              
    statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                    
    A FORM was called incorrectly.                                                                               
    What can you do?                                                                               
    Print out the error message (using the "Print" function)                                 
    and make a note of the actions and input that caused the                                 
    error.                                                                               
    To resolve the problem, contact your SAP system administrator.                           
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer                 
    termination messages, especially those beyond their normal deletion                     
    date.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                 
    . The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',           
    was neither                                                                             
    caught nor passed along using a RAISING clause, in the procedure                         
    "ME_UPDATE_AGREEMENT_PO" "(FUNCTION)"                                                   
    Since the caller of the procedure could not have expected this exception                 
    to occur, the running program was terminated.                                           
    The reason for the exception is:                                                         
    Incorrect FORM call.                                                                     
    The FORM call is incorrect for parameter number 1.                                       
    The current internal table passed to the formal table parameter has                      
    a type that is not compatible with the type of the formal parameter.                     
    The condition selected below has been violated:                                                                               
    (" ") The access types defined for the tables are incompatible.                          
          The following hierarchy shows the compatibility rules:                                                                               
    ANY_TABLE                                                                               
                        INDEX_TABLE   HASHED_TABLE                                           
                STANDARD_TABLE    SORTED_TABLE                                                                               
    A concrete access type is only compatible with types higher                        
          in the hierarchy. For example, STANDARD_TABLE is compatible                        
          with INDEX_TABLE and ANY_TABLE, but not with HASHED_TABLE.                                                                               
    ("X") The line types of the tables are incompatible.                                                                               
    (" ") The table keys of the tables are not identical.                                                                               
    (" ") One of the tables has a UNIQUE key, but the other has a                            
          NON-UNIQUE key.                                                                               
    How to correct the error                                                                               
    The exception must either be prevented, caught within the procedure                      
    "ME_UPDATE_AGREEMENT_PO"                                                                
    "(FUNCTION)", or declared in the procedure's RAISING clause.                             
    To prevent the exception, note the following:                                                                               
    You may able to find an interim solution to the problem                                  
    in the SAP note system. If you have access to the note system yourself,                  
    use the following search criteria:                                                                               
    "PERFORM_CONFLICT_TAB_TYPE" CX_SY_DYN_CALL_ILLEGAL_TYPEC                                 
    "SAPLEINU" or "LEINUU04"                                                                 
    "ME_UPDATE_AGREEMENT_PO"                                                                 
    If you cannot solve the problem yourself, please send the                                
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                                
       To obtain this, select the "Print" function on the current screen.                       
    2. A suitable hardcopy prinout of the system log.                                           
       To obtain this, call the system log with Transaction SM21                                
       and select the "Print" function to print out the relevant                                
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,                          
       supply the source code.                                                                  
       To do this, you can either use the "PRINT" command in the editor or                      
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred                          
       or which actions and input led to the error.

Maybe you are looking for

  • Can office 2013 home and business be installed in windows server?

    Can office 2013 home and business be installed in windows server?

  • HT201335 Mirroring function on Apple TV 3gen not working - help please

    I have a brand new Mac Book Air and recentlypurchased the Apple TV (3rd gen). The mirroring icon worked until I closed the screen on the laptop and then Apple TV stopped working on the tv I was streaming content to. I opened the screen and since then

  • ArrayMap

    Hi which package to import for ArrayMap. Error(262,34): class ArrayMap not found in class oracle.apps.ar.hz.components.address.webui.HzPuiAddressCreateUpdateCO is the error i am getting. import class for ArrayMap is? Thanks in Advance

  • Can MARS report on its self?

    I have a MARS-100 and was wondering if it can do self reporting. Such as notify me if the disk are full or if there was a unsucessful login attempt. Thanks

  • Force shutting down

    A couple times so far, my computer has simply run out of ram and completely froze. I open up force quit and quit a few programs but then it gets a pinwheel of death. I wait for like 5 mins and then I hold the power button for a few seconds so it forc