Dunning Smartform issue

While configuring the Smartform for Dunning F150_DUNN_SF it says that it is does not active nor exists. Then added this function module FI_PRINT_DUNNING_NOTICE_SMARTF using the transaction code BF31. Suggested by SAP Note.
When dunning transaction F150 is executed then getting a error message as Include text does not exist(Object text, ID).
Any hep is greatly appreciated.
Thanks,
Azhar.

CONFIGURATION STEPS FOR CALLING SMARTFORM
The system is usually customized to use the Sap Script by default. Configuration os required to be done for 00001720 to replace the default Function Module for SAP Script FI_PRINT_DUNNING_NOTICE with Smartform FI_PRINT_DUNNING_NOTICE_SMARTF
Step 1: Run transaction BF31.
Step 2: Edit the entry for Event 00001720.
Enter the Function Module as FI_PRINT_DUNNING_NOTICE_SMARTF
Refer attached document for the configuration.
After this keep a break point at function module 'FI_PRINT_DUNNING_NOTICE_SMARTF to check whether a smartform is configured. if the program is calling the above FM then smartform is configured.
please reward point ...if useful

Similar Messages

Dunning Smartform F150_DUNN_SF configuration

Hi,
Could anyone let me know the steps involved in configuration of Dunning smartform, I am also having a requirement where I have to configure Dunning smart form F150_DUNN_SF with the standard print program.
Could you please explain me the steps to configure this smartform, I am able to configure a sap script for dunning but not the smartform.
Thanks in advance.
Best Regards,
Abnish Jain

Hello
Based on the configuration in FBMP where the frequency is given and grace period is also given. Based on that the dunning levels are triggered when you dun a customer using F150. So each time in one run the dunning level is updated in the customer in the other dunning run the dunning level moves on to the next.
Thanks and Regards

Dunning smartform F150_DUNN_SF Error ?

Hi All,
I have assigned the standard dunning smartform "F150_DUNN_SF" for dunning letter printout, i have also configured BTE event 1720 to trigger smartforms. While triggering the dunning letter from F150 transaction, its giving a error "ULINE not found". Please provide some solution to this error ?
Thanks & Regards,
Navneeth K.

Hi,
Could you please let me know the steps involved in configuration of Dunning smartform, I am also having a requirement where I have to configure Dunning form F150_DUNN_SF with the standard print program.
Could you please explain me the steps to configure this, I am able to configure a script for dunning but not the smartform.
Thanks in advance.
Best Regards,
Abnish Jain

Showing error during run standard dunning smartform

Hi,
When i run sap standard dunning smartform (F150_DUNN_SF) ,
it shows following error
Printing dunning notices using SMARTFORMS,error during parameter transfer

Hi,
Please varify whether you are passing all parameters properly .

Smartform issue with page break

Hi All,
I have an unusual issue with page break. Here is my scenario, I have a group of items in my table main area and for each group there is sort of header that prints. Similarly there are multiple groups needing a header whenever there is a new group printing. So far it prints fine. But whenever there is a page break and when items from the same group also print on the next page the same header needs to print on the top of next page similar to how the header area repeats on each page. Unfortunately I did not see any page break event for table main area.
Here is an alternative I have tried but having issues: I have created two rows for this group header one printing from header and another printing from main area. Whenever there is a page break the same group header prints as part of the header and on the rest of the page it prints from the main area. But in a particular scenario, there is a new group starting at almost bottom of the page but as there is not enough space left on the same page (page protection) jumps to next page. In this case there are two group headers printed one coming from the preivous page main area and another coming from the next page header. I hope my explanation is clear enough to understand.
Please suggest if there is any basic feature of smartform that I have missed out can solve this issue or if there is another alternative you can think of. I appreciate your responses.
Thanks..

I was able to solve this issue on my own.
Instead of checking for a page break on header line I am using a flag that is prepopulated in the table. I set this flag whenver a new group of items starts. If the flag is set I print it from the main area and if it is not set I print it from the header. This helped in avoiding the multiple header lines..

Dunning Related Issue

Dear All,
I have configured Dunning for my company and for the first Dunning Level 1 the dunning is running sucessfully, no issues..
But when Iam running for the Dunning Level 2 I am unble to get a print out the log that has been displayed is
Dunning notice for account: 'D ' '2310D001 ' was not printed
> Forms for MAHNR: 'DHPL ', RBUKM: 'DHPL ', KOART: 'D ' do not exist (T047E)
But I have maintained Dunning texts in FBMP I have attached the Forms for my Dunning Level and I have also checked the table (T047E) and I could find the enteries there..The form that Iam using is F150_BE_DUNN_01 and it is activated.
I have checked the settings in BF31 and it is properly maintained.
Can Anybody help me in resolving this.
Thanks in Advance
Sunil

hi Sunil,
I am also facing the same problem, if your problem is resolved can you send me the solution on [email protected]
Thanks In advance.

Program name if no output type for dunning smartform

Hello Experts,
I want to know if smart form is not associated with any output type then how can I know which program is calling the smartform. I checked out in TNAPR with the smartform parameter value and system did not returns any hits. It means smartform is not associated with any output message type.
I am working with a dunning smart form where I need to make some changes, Transaction F150 displays the form print preview(One can also print from the transaction), But I have no idea which program is actually calling the smartform.
Secondly I made some changes in the text element but when through F150 I again viewed the form display, some thing I deleted from the text element still appearing in the preint preview. Could anyone throw some light on this and guide me.
secondly how to put breakpoint in the smartform, Normally in abap report you just press ctrl+shift and f12 but in breakpoint it is not applied.
Thanks,
Mark

FI Forms will not save under TNAPR table
FI Form names and Program Try to use below tables :
Tables : T001F or TTXFP
There is no output types for FI Forms,
Check the below link :
http://help.sap.com/saphelp_erp2004/helpdata/en/15/8c2239c2af4a04e10000000a11405a/frameset.htm
Path for see form name and print program - Dunning
path for configuration is :
SPRO
FInancial Accounting->Contract Accounts Receivable and Payable->Business Transactions->Dunning Notices.
Just goto SMARTFORMS Transaction -> use smartform name -> execute smartform -> it will go SE37 -> click on display -> here you can set up break point.
or you can use print program to setup debugging.
Now run F150 Transaction -> here you are able to see debugging mode
Thanks
Seshu

Include statement called by Standard text - Smartform issue

Hi all
I'm in a project to migrate Sap Script to Smartform and I'm facing a issue with Include texts. Some texts are actually a command that calls another text - using /: Include statemente.
I debugged the Include text on Smartforms and I found the part of the code that simply delete any command /: (and a few other formats)
so I really don't know if someone already found a way to make this work.
Thanks for all help
Andréa

Hello Andrea,
As per i know in Smartform we have to use INCLUDE TEXT for the text node . In that you can include your text object - Z_SD_AB_CLOSING. Kindly check the below screen :
In text object put - Z_SD_AB_CLOSING.
Language - EN
Please try and let me know if this is not your requirement.
Stay Awesome,
Romit Raina

Smartform issue. Plz help.

Hi there,
I have a smartform developed in Development server at offshore. On executing it there, it works fine and gives a decent output. But, when I am testing the same from onsite it displays junk.
Is it due to different local printer config or something? Please advice.
Regards,
Sanjana.

Hi,
Usually, printing issues are encountered if one tries to print from the same printer accessing as LOCL or through Network. One might get a good output through LOCL, but can face a problem if the printer is accessed through Network. Sometimes it could be the other case. In any case it is the problem with the printer configuration. Try to consult your Basis team regarding this.
Regards,
Vara

Bill of leading smartforms issue

Hi ,
I have modified standard BOL smartforms and configured standard BOL driver program,smartforms in NACE and assigned output types . but while executing through VT70- I am getting error messegae in bottom Output could not be displayed (if may not be complete).
Please help me to solve this issue.
Rgerads,
kaaviya

Hi
Did you use the same driver program which is used for script??
If Yes, then that is not right.
If No, then check with the print program If the values are being passed to the FM correctly..
Next, check your smartform. Check the width of the windows, check the declarations...
Regards,
Vishwa.

Smartform Issues

Dear ABAPers:
I am facing an issue while activating my SmartForm, the error which i am getting is "Text ID Y001 language EN not found"
Kindly note that in my Smarform i am using the FM "READ_TEXT'.
Regards,
Shegar
ABAP Consultant
Moderator message - Please Use a more descriptive Subject
Edited by: Rob Burbank on Apr 5, 2010 10:39 AM

Hi,
Please uncomment the Exceptions of FM 'Read_text'. and Place the condition in displaying the text like IT_TLINE # SPACE in the condition tab of ur text.
Once u check in SE37 by execting the FM Read_text giving all the input parameters if it gets executed the u can use it else ask the Functional guy for the solution.
Regards,
Vijaya Lakshmi.T

Debugging Smartform Issue

Hi Experts,
DO you have any experience where you cannot debug the smartform? I already tried having BREAK-POINT in the SMARTFORM itself or having the break-point on the Print Program.
I tried the SMARTFORM TRACE and it was working, as I can see the smartform I am using that is btw a custom delivery smartform. I already put debug program RLE_DELNOTE in the CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME' but still not debugging. Any suggestions?

Ok let me check:
Driver Prg : RLE_DELNOTE - this is correct
Form : Z18_SD_F_0003 - this is correct
Routine: ENTRY
Print Medium: Print Output
Application Area: V2
I believe you could able to debug any other ABAP objects, say an ABAP program in se38. - Yes I can debug any program, authorized
Lets have the check list to look into
1) Is the Application Area , output type , Processing routine , Medium assigned is correct. Even the Print Program. Hope you did this check else can you come up with. as some times there is a possibility of assigning to wrong Application area(would have assigned the same at multiple places). - Checked as above
2) Check the right Output type was selected while printing the document through the respective transaction - Checked in NACE with Output Type ZDO3 with the above settings and also in the Delivery Output Header assigned with ZD03
3) Did you placed the Static breakpoint inside the Node "Program Lines" in the form. - Yes with BREAK-POINT
4) Hope you place the Breakpoin the respective FORM Routine of the Driver Program.(here you should be sure called if the breakpoint is in the right Routine (which you can find in NACE assignement under the same line "Medium" ). - Yes Under the Routine ENTRY, I placed a break-point
I checked with BASIS and they are doing a copy to the same system, QAS and it occured some errors, I cannot somehow relate it to this issue but there are some other abnormal issues.
Edited by: Cecilio Cruz II on Jul 22, 2011 9:27 AM
Edited by: Cecilio Cruz II on Jul 22, 2011 9:31 AM

Purchase order and rfq smartforms issues

Anyone please let me know the issues faced with purchase order and rfq smartforms

Problems I had is changed line items to print a changed PO/RFQ wich will print what was changed with each line.
Can't remember the solution in total. If you search on the FM ME_READ_CHANGES_EINKBELEG in the main program of the SAP standard and setup a default PO to print using the standard program and form medruck you can debug it.
There is a change flag when printing the form, field - NAST-AENDE.
Else the form is very much streight forward.
Regards,
Marius

Smartforms issue urgentttt....

Hi All,
This is a very urgent scenario which need to be resolved as soon as possible. Please go through the following.
I am trying to take a print of philippines TDS form using a transaction S_P00_07000134 - Generic Withholding Tax Reporting. After entering the values related to philippines and selecting form tab when i view the print, i find only vendor and payor details in the form not the line items which are visible in report.Could you please update me on this scenario as we are in GOLIVE phase. The Form name is IDWTCERT_PH_2307.
TCode: S_P00_07000134 - Generic Withholding Tax Reporting
Input Values
Process type: std
Output Group:ph2
Country Key:ph
Reporting Period:01.04.2008 to 22.04.2008
Company Code: 1100
Vendor:600001
In forms tab
Selected Print Form1
Number of copies: 1
Output Device: local
execution of this values(F8)
selected print or print preview
output will be displayed or printed with out line items and when we press back we find the regular report with line items.
Could anyone give me the solution it is very urgent....
regards
PSNG

I am able to do this part.What is getting stuck is that i have say 5 totals with me and i pass to internal table then how can i fetch from smartform.If i create a structure for this internal table either way doesnot work i tried F1 like bseg-dmbtr and mseg-menge ie amount in currency as well as menge i tried.Failure occurs in smartforms as it fails to recognize the field itself.

Smartform Issue.. Displaying the fields in a single row

Hi All...
In my smartform, the data are displaying in 2 different rows, even thought they are placed in a single row of a table.
Its getting diplayed as follows..
          mat-123   10 kg
100                                    2500.00       2500.00
Now i would like to print 100 and 2500.00 in above row where mat-123 is getting displayed....
Where to check and what to do ...????
Please help me....
Regards
Pavan

Hi Pavan,
                Try increasing the column width of the table for this 'mat-123 10 kg'. then it should display in the same row.
Regards,
Hema.
Reward points if it is useful.

Dunning Smartform issue

Similar Messages

Maybe you are looking for