Duplicate folder names in DISCO Admin.

I am creating multiple Business Areas in the same EUL. Some of these BAs contain the same tables.
In Folder properties, Discoverer provides a 'Name', defined as the name users will see to identify this object.
There is also an 'Object' Property, which is the name of the source table, and an 'Identifier' that is defined as a unique value that identifies this Element across the EUL.
By default, both the 'Name' and the 'Identifier' are given a numeric increment each time it is used in another Business area. I would like to keep the 'Name' consistent across BAs, but Disco Admin will not allow non-unique 'Names' (within a EUL). What's with this? Isn't a unique 'Identifier' enough???

You are correct... the identifier is 'not unique enough'.
I never understood that either. Someone have an answer as to why a unique identifier does not identify a folder?
The work around is to define the folder once in one business area. Then use the Tools -> Manage Folders dialog to add that same folder to another business area.
When the folder is added this way, it is cloned into the business area with its uniqueness intact.
Best regards,
John Hagel

Similar Messages

I keep receiving the following error code: 1025 Duplicate Folder Name [Gmail]/Drafts/â Orders/Books/Books/eBooks (Failure)

Duplicate folder name [Gmail]/Drafts/â Orders/Books/Books/eBooks (Failure)
(/[Gmail]/Drafts/&Iho- Orders/Books/eBooks/)

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to remove duplicate template names in central admin - Sharepoint 2013

Hi Guys,
I can see some duplicate site templates in central admin (SharePoint 2013).
How can i remove it? Please help me out on this.
Regards,
Krishna

Hello,
As there are many duplicate templates you could try below two steps.
1) Find the templates :
# Find the template name of SharePoint site using PowerShell
$web = Get-SPweb <Site Url>
Write-host “Web Template:”
$web.WebTemplate ” | Web Template ID:”
$web.WebTemplateId
$web.Dispose()
# To get a list of all web templates, use the following PowerShell code
function Get-SPWebTemplateWithId
     $templates =
Get-SPWebTemplate | Sort-Object "Name"
     $templates |
ForEach-Object {
$templateValues = @{
     "Title" =
$_.Title
     "Name" =
$_.Name
     "ID" =
$_.ID
     "Custom" =
$_.Custom
     "LocaleId" =
$_.LocaleId
New-Object PSObject -Property
$templateValues | Select @("Name","Title","LocaleId","Custom","ID")
Get-SPWebTemplateWithId | Format-Table
2) Remove the ones you want to
$templateTitle = "TitleOfTemplateToBeZapped"
  $site = Get-SPSite <Site coll url>
  $templates = $site.GetWebTemplates(1033)
#lcid, 1033 = U.S. $badTemplate
= $templates | where { $_.Title
-eq $templateTitle }
  if ($badTemplate
-ne $null) {
    # the hidden feature Id is the first part of the template
    #    name for custom web templates
    $id = $badTemplate.Name.substring(0,
$badTemplate.Name.IndexOf("#"))
    $badId = [System.Guid]($id)
    $site.Features.Remove($badId)
    write-output "Template '$templateTitle' has been removed"
} else {
    write-output "No template was found with the title of '$templateTitle'"
  $site.Dispose()

Duplicate folders NAME~1 appear in PSE9 Elements 9 Orgainser folder view

I am running Photoshop Elements 9 (PSE9) in windows7 and I am having a problem of apparently empty duplicate folders in Organiser's folder view (thumbnails on the right, Windows Explorer type folder list on the left).
A new apparently empty folder structure has appeared on in the folder view, identical to my main set of photo folders but containing no thumbnails and with a truncated folder name, eg DigitalPhotos becomes Digita~1 and FamilyandFriends becomes Family~1. If I delete any of the apparently empty subfolders in the duplicate folders, it deletes all the real jpgs from the hard drive and they show up as a missing file when I click on the proper thumbnail in the proper folder. It would appear to me that the catalog is referring to the same underlying file at two points for my whole catalog.
As the folders are apparently empty there is no ability to use the delete file option and uncheck delete file to delete only from the catalog
I have tried..
- catalog optimise
- catalog repair anyway (no faults found)
- catalog repair rebuild visual similarity index
- deleting the thumbnail file from ProgramData\Adobe\etc. then rebuilding all thumbnails (took hours) - I thought this had solved the problem when I checked very late last night but it wasb back when I turned on the computer this morning. I am now questioning whether in fact this solved the problem or if this was my imagination/ lack of sleep
They clearly shouldn't be there and I am concerned that double-links to the same underlying file will cause me corruption-related trouble.
Any ideas? I am really concerned the whole thing is going to crash on me and erase endless hours of work.
Thanks
Kimberley

Try these troubleshooting notes or download the ASA to analyze your error report.
http://kb2.adobe.com/cps/858/cpsid_85843.html#main_Error__Below_mentioned_applications_hav e_failed_to_install__Shared_technologies_

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

Is OWB can do the job of Disco Admin?

Hi ,
i am new to discoverer world
i just want to ask, do we still use Discoverer administrator to create our folders, hierarchies ,.......
or just OWB + Dico plus / viewer is sufficient , becuase i don't find the word "disco admin" in the new job specs in job sites
Thanks in advance

Hi Oracle Lover
I love your login name by the way.
I'm an out and out advocate of Discoverer Admin as I find it so much easier to work with than using OWB. Now while you can use OWB to generate a business area, with its associated folders, items, joins and so on, I haven't yet seen a way for OWB to manage security to the business areas. Unless someone can contradict me I'm sure you still need to use Admin to control access to the business areas and what a user can do with the data once connected. I also don't believe you can do summary management inside OWB.
Don't get me wrong, OWB is a great tool but it doesn't replace Discoverer Administrator - not yet anyhow! Oracle are really focused on the DBA side of OWB and not on the artistic side of presenting Discoverer to end users in a pleasing manner. You can't add folder and item separators inside OWB, you can't create custom SQL folders and you can't create complex folders, all of the things that experienced Discoverer administrators do on a daily basis.
To answer Russ' comment you do still need to have an EUL into which to insert a business area from OWB.
Hope this helps
Best wishes
Michael

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

Insane XML Import, Huge Project, Duplicate file names work around...

I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....

I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn

How to change a folder name in file manager

I misspelled a folder name and now the url is misspelled as well, and i cant see a way how to change it, does anyone know how to change it?

You can go to Develop Mode inside site admin and change folder name. Please see the screen-cast :
Thanks,
Surjeet

Cannot use duplicate table name error in AMDP

Hi Experts,
I'm developing an application which has the following architecture
SAP UI5->Gateway->ABAP Managed DB procedures(AMDP)->HANA SP(Stored Procedure)
We are having a very peculiar problem where the gateway service works inconsistently for the same input data.
i.e If I execute the same service n number of times, I get the results successfully for say n-3 times but the other 3 times I get a "RFC Error :Error while executing Database procedure"
There is no change in the input data or DB table data during all the executions.
Running the stored procedure stand alone in HANA studio works all the time.
We tried executing the AMDP from SE24 and the same behavior occurred.
When trouble shooting we found that the exception occurs inside the AMDP when the call db procedure statement is executed.
Could you please advise what could be the possible reason for this any tuning parameter/unavailability of db connections?
Or could you please suggest some other troubleshooting mechanism by which we can zero in on the cause?
When I go in the debug mode I can see the exact error as
cannot use duplicate table name: [288] SAPXXX.ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE#stub#20140905055908: line 15 col 3 (at pos 492): cannot use duplicate table name exception:
where ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE is the AMDP class and method. SAPXXXis the schema.

I reported this to Adobe customer support on 11/29, and here is their response:
Wednesday, December 5, 2007 12:51:27 PM PST
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop Elements® 6.0.
I understand that images are deleted if you accidentally try to move
them to a folder that already includes a file of the same name.
Thank you for bringing this to our attention. I was able to replicate
this behavior as well. The best method to report errors of this nature
is using the following form on our website:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
Kind regards,
Alan C.
Adobe Web Support

Can't synch iPod classic to iTunes after updating iTunes. a duplicate file name was specified.

I can't synch my iPod classic. "A duplicate file name was specified." I tried on two different computers on which it had previously worked fine.

Try deleting the iPod Photo Cache from the nominated folder that you have set up to sync photos to the devices.
See iTunes: Understanding the iPod Photo Cache folder for more info.
tt2

I get an error message when trying to sync my reset ipod "The iPod ...cannot be synced. A duplicate file name was specified."

i get an error message when trying to sync my reset ipod "The iPod ...cannot be synced. A duplicate file name was specified."

Locate the photos folder which is selected for syncing with the device and delete the folder iPod Photo Cache inside.
tt2

Changing a folder name

I need to change my folder name with the home icon.. this can be changed by the user icon..... but when i change it it says i might lose information.... could someone please help

Here it is again but I didn't do anything different, and it works for Rudegar. http://support.apple.com/kb/HT1428
Here's a copy and paste in case you still can get to it:
OS X: How to change user account name or home directory name
Summary Learn how to change your user account name and home directory name (which should match) by using the advanced procedure described below.
Products Affected
Mac OS X 10.4, Mac OS X 10.5, Mac OS X 10.6, OS X Lion, Mac OS X 10.0, Mac OS X 10.1, Mac OS X 10.2, Mac OS X 10.3, Mac OS X 10.4
About the account name
Each user in Mac OS X has a "Full Name" (referred to as "Name" in Mac OS X v10.5.8 or earlier) and an "Account name" (referred to as "Short Name" in Mac OS X v10.5.8 or earlier) as defined in the Users & Groups pane of System Preferences (referred to as Accounts pane or Users pane in Mac OS X v10.6.8 or earlier). The account name can contain up to 255 lowercase characters with no spaces. This is the name used to create a user's home directory (also known as the user's Home or Home folder) in the Users folder. Once the user has been created, the account name (or short name) cannot be changed in the Users & Groups pane of System Preferences.
Changing the account name
Though there are other methods by which an advanced user may change the short name and related information, the easier and safer workaround is described below.
Before following these steps, you may wish to back up your important data.
For Mac OS X v10.5 or later
Enable the root user.
Log in as root.
Navigate to the /Users folder.
Select the Home folder with the short name you want to change, and rename it just like you would rename any folder. Keep in mind that the shortname must be all lowercase, with no spaces, and only contain letters.
Use the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier) in System Preferences to create a new user with the Account name or Short Name that you used in the previous step.
Click OK when "A folder in the Users folder already has the name 'account name'. Would you like to use that folder as the Home folder for this user account?" appears. Note: This will correct the ownership of all files in the Home folder, and avoid permissions issues with the contents.
Choose Log Out from the Apple menu.
Log in as the newly created user. You should be able to access all of your original files (on the desktop, in Documents, and in the other folders of this Home).
After verifying that your data is as expected, you can delete the original user account via the Users & Groups pane (Accounts pane in Mac OS X v10.6.8 or earlier).
Disable the root user.
For Mac OS X v10.4.11 and earlier
Optional step: As a precaution, you may disable automatic login prior to performing this procedure. You might want to back up important data, too. In the event that you restart the computer for any reason before completing the procedure, this would prevent complications from having displaced the user selected for automatic login. (For Mac OS X v10.1.5 or earlier, automatic login is found in the Login preference pane. For Mac OS X v10.2 and v10.3, it is found in the Accounts preference pane.)
Mac OS X v10.3 or later: If FileVault is enabled, temporarily turn it off, which will log you out.
Enable the root user and log in as root.
For Mac OS X v10.2 or later: Open the Accounts pane of System Preferences.
For Mac OS X v10.1.5 or earlier: Open the Users pane of System Preferences.
In the Name list, locate the user account with the short name that you want to replace. This will be referred to as the "original user".
Note whether or not the original user is identified as an administrator, which appears in the Kind column to the right.
Click New User. For Mac OS X v10.3 or later, this is the plus button.
Complete the Name and Short Name fields as desired. Be sure that the Short Name is exactly as you want it to appear.
For Mac OS X v10.2: Fill in the New Password and Verify fields.
For Mac OS X v10.1.5. or earlier: Click the password tab, then fill in the Password and Verify fields.
If the user you are replacing is an Admin user, then select the checkbox for "Allow user to administer this computer". For Mac OS X 10.3, click the Security tab to locate this setting.
Note: This checkbox is dimmed and already selected if there is not another Admin user. Mac OS X requires at least one Admin user.
Click Save. (Skip this step for Mac OS X v10.3.)
Quit System Preferences.
Click the Finder icon in the Dock.
Choose Computer from the Go menu.
Open the Users folder in the Mac OS X disk.
Open the folder with the short name of the new user that you just created.
Drag the contents of this folder to the Trash.
Important: Do not empty the Trash yet. In the event that you accidentally move contents of the wrong folder, you may recover them from the Trash after discovering your mistake.
Choose New Finder Window from the File menu. Be sure to position the new window so that you can see both Finder windows.
In the new window, open the folder of the original user.
Press the Option key as you drag the contents of the original user's folder into the new user's folder (that you emptied in Step 16). This makes a copy of the contents.
Close one of the Finder windows.
Open the Terminal application (located at /Applications/Utilities/).
Type: chown -R <new_name> /Users/<new_name>
Important: Replace "<new_name>" with the actual short name of the new user you just created. For example, if the new user had the short name "jacques", you would type:
chown -R jacques /Users/jacques
Press Return
Quit Terminal.
Choose Log Out from the Apple menu.
Log in as the new user. You should be able to access all of your original files on the desktop and in the folders of the Home directory.
Important: If you do not have access to your original items, log out and log back in as root, then repeat Step 22. Also, be sure that you did not place the wrong files in the Trash in Step 16.
Choose Home from the Go menu.
Open the Library folder, then the Keychains folder inside it.
Select the keychain, which should still have the short name of the original user.
Choose Show Info from the File menu.
In the Info window that appears, choose Name & Extension from the pop-up menu.
Change the name to match the new user's short name.
Close the Info window.
Open the Keychain Access application, located in the Utilities folder.
From the Edit menu, choose "<new_name> Settings". For the user Jacques, this would appear as: "jacques Settings".
Click Change Passphrase.
Enter the desired password, then click OK. You may use the same password again or set it to match the login password of the new user.
Note: This step prevents you from discovering later that the keychain had retained an older password.
Quit Keychain Access.
Disable the root user.
If everything is working correctly, you do not need to log back in as root to empty the Trash. The folders you put there occupy a negligible amount of disk space.
Depending on what software you have installed, you may wish to rename other files and folders that may have been created under the original user short name to match the new user short name.
Once you are certain that everything is working properly, you may want to delete the Home directory (folder) of the original user, which should be empty. For instructions on how to do this, see this article.
Additional Information Note: Although you can change your Home name in Mac OS X v10.3 or later, you usually shouldn't.
Rate this article:
Not helpful
Somewhat helpful
Helpful
Very helpful
Solved my problem
Last Modified: January 24, 2012
Article: HT1428
Views: 2475086
Rating: 3.0/5 Stars
(1039 Responses)
Languages
Still need help?
Need more help? Express Lane is the fastest way to contact Apple. Use Express Lane to connect with an expert in Apple Support.
Get started
Home > Support Shop the Apple Online Store (1-800-MY-APPLE), visit an Apple Retail Store, or find a reseller.
Apple Info
Site Map
Hot News
RSS Feeds
Contact Us
Copyright © 2012 Apple Inc. All rights reserved.
Terms of Use
Privacy Policy

ValidationException: Duplicate type name

I am trying to deploy an ejb web service to oc4j 10.1.3.1.1 from JDeveloper 10.1.3.2. During deployment I get this exception thrown:
07/04/19 09:53:03 oracle.j2ee.ws.common.tools.api.ValidationException: gov.mi.mdch.mcirhl7.data.Select - Duplicate type name "gov.mi.mdch.mcirhl7.data.Select" for Java type "{http://service.ejb.mcirhl7.mdch.mi.gov/}Select" found. To remove this error do not specify a single typeNamespace for all value types or specify a mapping file. This error could also be caused when an erroneous type has been used more than once.
07/04/19 09:53:03      at oracle.j2ee.ws.common.processor.modeler.rmi.RmiModeler.buildModel(RmiModeler.java:247)
07/04/19 09:53:03      at oracle.j2ee.ws.common.processor.config.ModelInfo.buildModel(ModelInfo.java:173)
07/04/19 09:53:03      at oracle.j2ee.ws.common.processor.Processor.runModeler(Processor.java:72)
07/04/19 09:53:03      at oracle.j2ee.ws.common.metadata.annotation.DeploymentGenerator$DeploymentCompileTool.run(DeploymentGenerator.java:200)
07/04/19 09:53:03      at oracle.j2ee.ws.common.metadata.annotation.DeploymentGenerator.generateDeploymentArtifacts(DeploymentGenerator.java:131)
07/04/19 09:53:03      at oracle.j2ee.ws.common.metadata.annotation.EJBWebServiceAnnotationParser.parseAnnotatedBean(EJBWebServiceAnnotationParser.java:165)
07/04/19 09:53:03      at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
07/04/19 09:53:03      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
07/04/19 09:53:03      at java.lang.reflect.Method.invoke(Method.java:585)
07/04/19 09:53:03      at oracle.j2ee.ws.server.deployment.oc4j.WebServiceAnnotationListener.parseAnnotatedClass(WebServiceAnnotationListener.java:85)
07/04/19 09:53:03      at com.evermind.server.ejb.AnnotationParser.notifyAnnotationListeners(AnnotationParser.java:201)
07/04/19 09:53:03      at com.evermind.server.ejb.AnnotationParser.parseAnnotations(AnnotationParser.java:73)
07/04/19 09:53:03      at com.evermind.server.ejb.EJBPackageDeployment.parseMetaData(EJBPackageDeployment.java:939)
07/04/19 09:53:03      at com.evermind.server.ejb.EJBContainer.postInit(EJBContainer.java:832)
07/04/19 09:53:03      at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:217)
07/04/19 09:53:03      at com.evermind.server.Application.setConfig(Application.java:439)
07/04/19 09:53:03      at com.evermind.server.Application.setConfig(Application.java:340)
07/04/19 09:53:03      at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1853)
07/04/19 09:53:03      at oracle.oc4j.admin.internal.ApplicationDeployer.addApplication(ApplicationDeployer.java:512)
07/04/19 09:53:03      at oracle.oc4j.admin.internal.ApplicationDeployer.doDeploy(ApplicationDeployer.java:196)
07/04/19 09:53:03      at oracle.oc4j.admin.internal.DeployerBase.execute(DeployerBase.java:93)
07/04/19 09:53:03      at oracle.oc4j.admin.jmx.server.mbeans.deploy.OC4JDeployerRunnable.doRun(OC4JDeployerRunnable.java:52)
07/04/19 09:53:03      at oracle.oc4j.admin.jmx.server.mbeans.deploy.DeployerRunnable.run(DeployerRunnable.java:81)
07/04/19 09:53:03      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
07/04/19 09:53:03      at java.lang.Thread.run(Thread.java:595)
My interface looks like this:
package gov.mi.mdch.mcirhl7.ejb.service;
@WebService
public interface CodeDataServiceWebService extends Remote {
List<ServiceType> queryServiceTypeFindAll()
throws RemoteException;
List<Version> queryVersionFindAll()
throws RemoteException;
This interface is implemented with a simple stateless session bean (where I do not have any web service specific annotations, mainly because JDeveloper did insert any there when it auto-generated the web service interface). Both Version and ServiceType are EJB 3.0 entity beans which extend gov.mi.mdch.mcirhl7.data.Select. If I change ServiceType so that it does not extend Select, then it deploys fine. Same if I just comment out queryServiceTypeFindAll() altogether. However, when I successfully deploy the web service, the generated WSDL and mapping file make no mention of the Select class, so I don't see why there's a problem with that class when more than one of my List types extends it.
I've been searching for a solution to this problem for most of the week to no avail. Any thoughts? Thanks.
Joel
Subject was edited by: user570454

Joel,
You may have some encounter some backward incompatibility between the code generated for 10.1.3.2, when you run the application in the embedded container and when you deploy on a remote instance using 10.1.3.1.
It may be worth trying to re-assemble the application using JDev 10.1.3.1 or use the command line (or ant integration) of WSA to build the application that you target at the 10.1.3.1 instance using the same version of the tooling.
Chapter 18 of the user guide provide details about ant commands.
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28974/wsassemble.htm#CHDDBCCA
You may also want to report this using the metalink/support channel, so that the potential bugs behind this can be addressed for you.
-Eric

How do I search the folder tree by parts of a folder name. Is there a folder library similar to the bookmark library to aid folder organization?

How can I search by email account folder names and bookmark folder names by keywords or parts of folder name? Is there a way to enter and associate keywords to email/bookmark folder names?
We file all our email transactions and bookmarks in an inverted tree structure under the appropriate ISP account and user name but often end up with duplicate taxonomical entries under multiple ISP accounts such as one for Roadrunner or Google-mail address for the same Windows user account and name. I sometimes create an identical folder in both accounts. Being able to search by foldername across email accounts in the same Windows username would be wonderful to correct bifurcations in folder name taxonomy.
What am I not doing right - Please?
Thank you kindly - Chris

Dear Zenos,
Thank you ever so much. That was exactly what I'd wished for and need. I have installed it on all five of my computers.
I have been working on electronics and computers component level and programming since I was a Ham radio operator at age 14. This is one of the few times I've ever asked for an answer to a question and had it so fully satisfied by someone else rather than having to muddle my way through to a solution on my own.
Now that might not seem to be much praise (if you figure I might be 15) but I was 14 in 1963 and I held the position of senior corporate technical support engineer for Data General Corp. (old mini-computer manufacturer) I've been working on computers since bits were wooden!
Anyway ... THANKS .. I really mean it!
Chris

Duplicate folder names in DISCO Admin.

Similar Messages

Maybe you are looking for