Duplicate Item Name

Hello all,
I have a widget in Captivate 5.0 that pulls in an image based on the name of the slide. The widget is named according to a convention i created. W_02_0004_02
This would signify (Module 02 - Slide 0004 - Image 02)
I had incorrectly labeled one of the widgets and need to change it back
I receive the following error: W_02_0004_02 is either a reserved keyword or is already assigned ot another item. Provide a different name for the item.
How do i delete the memorized name in Captivate so i can re-use this item name.
Deleting the "Adobe Cached Projects" folder did not help this issue
That item name does not exist in the Captivate Library
I have selected and deleted all unused items in Captivate also.
Thank you so much for your help,
~ Sean

UPDATE: It seems this issue of not being able recycle Item Names may be fixed in Captivate 5.5. I know it definitely existed in Captivate 5.0 but I just tested the use case in Cp 5.5 and found I could re-use the item name of a deleted object without triggering an error message. I only tested on buttons, captions, and highlight boxes. So there may be some scenarios where this still causes a conflct (e.g if the objects are referenced by Advanced Actions) but I haven't tested this.
Perhaps you could download the Cp 5.5 trial and check whether upgrading your projects (copies of your projects) would resolve the issue for you.

Similar Messages

Help needed in removing duplicate items of list box in java

How to remove duplicate items of list box while dynamically inserting (on-click event)
It is not identifying duplicate data
Variable name is HP_G1
HP_dmg1 = (DefaultListModel) HP_G1.getModel();
int a = HP_G1.getModel().getSize();
System.out.println("HP list no--------> "+a);
if(a!=0)
for (int j=0; j<a; j++)
String item1 = String.valueOf(HP_List.getModel().getElementAt(j));
System.out.println("HP list added--------> "+item1);
if(HP_dmg1.equals(item1)){
HP_dmg1.remove(j);
else
HP_dmg1.addElement(GPL);
}

Your code is unreadable, so I'll ignore it. In the future please press the message editor's CODE button to format code.
As to your problem, to the point you normally use a Set instead of List when you don't want duplicates in a collection.

Duplicate item filename error

here's the story:
i had a 1tb drive (drive 1) and a 1tb back-up drive (drive 2). drive 1 crashed and i returned it and got a new drive (drive 3). i copied over the media from drive 2 to drive 3. it finished. then when i restarted, drive 2 was dead too. i can't find my disk warrior so rescuing that drive will have to wait. so now i have drive 3 and i mount it and start fcp 5. looks like most of my copied media has gotten trashed in the move. all looks green and when i go to the finder to try to play the clips, they are corrupt. so i delete all the media and start digitizing everything. (feature length show here and 45 hour long tapes...no fun). i get about 12 tapes in and then move the system from my home to work. restart and go to start digitizing on tape 12 where i left off at home and i get the "additional items found" dialogue box pop up. i respond "add". then i get an error : "duplicate item filename". i have the choice to rename,skip or abort.i trash the preference settings. i reset the scratch disk. there are no media clips on the system with dupe names. what can i do? please do not suggest that i add a 1 to everything. i am batch capturing 30+ more tapes and each tape has 40 clips. i am not going to type 1 after each clip and do them one by one. help please. is this a meta data error on the capture drive...i wouldn't think so as i reset the capture disk to the internal to try to eliminate that as a possibility.

bump

Finding duplicate items in item master query

Hi..
I need to find the all duplicate items with same foreign name in Item master data ....Query is needed .
Regards,
K.Ramasamy

Hi Ramasamy.
Try:
select ItemCode, ItemName, FrgnName
from OITM
where FrgnName in (SELECT FrgnName FROM OITM
group by FrgnName
Having Count(FrgnName)>1)
Thanks,
Gordon

How to duplicate Item

Hi,
I try to duplicate item with this code
                        Dim vItem As SAPbobsCOM.Items
                        Dim RetVal As Long
                        vItem = oCompany.GetBusinessObject(BoObjectTypes.oItems)
                        'Retrieve a record by its key from the database
                        If vItem.GetByKey("Art_Base") = True Then
                            'Set value to mandatory fields:
                            vItem.ItemCode = "MyNewItem"
                            'Set Value to other fields
                            vItem.ItemName = "MyNewItem Name"
                            vItem.InventoryItem = BoYesNoEnum.tYES
                            vItem.SalesItem = BoYesNoEnum.tYES
                            vItem.PurchaseItem = BoYesNoEnum.tYES
                            'Adding the Item
                            RetVal = vItem.Add
                            'Checking the result
                            If RetVal <> 0 Then
                                oCompany.GetLastError(sErrCode, sErrMsg)
                                MsgBox(sErrCode & " " & sErrMsg)
                                BubbleEvent = False
                                Exit Sub
                            End If
                        Else
                            oCompany.GetLastError(sErrCode, sErrMsg)
                            MsgBox("Failed to Retrieve the record " & sErrCode & " " & sErrMsg)
                            BubbleEvent = False
                            Exit Sub
                        End If
It does not work, I have a message in OITW.ItemCode
Why ?
Thanks

Dear Didier LEVAN,
You may try to duplicate the item via XML file by use
oldItem.SaveXML -> change Item code, etc, in xml file ->
newitem = oCompany.GetBusinessObjectFromXML(xmlfile)
Best Regards
Jane Jing
SAP Business One

Adding keyboard shortcuts for duplicate menu names

I wanted to make a shortcut for the "Use Default" menu item under Format/Fonts/Baseline in Pages. To do that i fired up system preferences and added a new shortcut for Pages and typed in "Use Default" as the name. Unfortunately there is a second menu item called "Use Default" under "Ligature", which gets teh shortcut since it comes first in the menu list.
Is there a way to add a shortcut to a specific submenu subitem, so i can force the shortcut to be for the Use Default under Baseline? This applies not only to Pages but to every application which has duplicate menu names in it.
Thanks,
Chris Niski

I probably shouldn't reply and get your hopes up... but I noticed that the Shortcut setup didn't allow for specifying menu names (hah! even tho the text box is named "Menu Name" not "Menu Item") and wondered if there were apps that had duplicate menu names.
I'm no help at all, unless sympathy helps...

HT1386 Trying to sync my music into my iphone 4s but a pop up keeps showing up saying "The iPhone "Brandon's iPhone" cannot be synced. A duplicate file name was specified." How can I fix this?

Trying to sync music into my iPhone 4s but a pop up keeps showing up saying "The iPhone "Brandon's iPhone" cannot be synced. A duplicate file name was specified." How can I fix this?

Remove any duplicates in your iTunes Music Library by following the link below:
How to find and remove duplicate items in your iTunes library
Then try to sync again.

Duplicate Object Name Error When Publishing Crystal Reports from BW to BOE

Hi,
We recently upgraded our systems (all client and server) to SP2.7 in order to solve a problem with saving Crystal Reports to BW. Now we are experiencing a new error when trying to publish a Crystal Report from BW to BOE (either all in one step from Crystal Reports application or directly from within BW).
Upon trying to publish a Crystal Report from BW to BOE, we get the following error:
"An error occurred while saving and / or publishing. The return code 1 was returned from the server. Logon to Crystal Enterprise failed. Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : Duplicate object name in the same folder."
We have repeated this issue numerous time with different reports, users and logon credentials and have verified that there are NOT any duplicate object names.
Additionally, in some cases, the report ultimately publishes to BOE, but with the above error interruption along the way.
Any ideas?
Thanks,
Josh
Edited by: Josh Crawford on May 10, 2010 9:46 AM

Ingo,
Apologies for the delayed response. We've spent a few days poking around with this issue, and had even opened a customer message for it (13641).
In the end, it seems that the problem was somehow associated with the "Prepare this report for translation." flag in the "Save to BW Options" dialog box of Crystal Reports. If we try to Save & Publish with the Translation flag selected, we get the duplicate entry error. If we Save & Publish without the Translation flag selected, everything is fine.
There are still some details we need to look into, but for the time being it looks like we don't have an issue anymore(assuming we ever did) as we're not concerned with Translation capabilities.
If we come across the problem again, I'll post again.
Thanks,
Josh

When I try to use autofil to enter my name address ect it requires me to click on each item , name, email ect how do I get it to use the whole profile

when I right click on autofil a widow comes up with my profiles, I see no way to simply choose one and have all the info filled in. I have to click each item, name , address ect to have it show on whatever form I am trying to fill

You can try one of the form fill extension:
*Autofill Forms: https://addons.mozilla.org/firefox/addon/4775
*Autofill: https://addons.mozilla.org/firefox/addon/262804/
*fireform: https://addons.mozilla.org/firefox/addon/3193
*Formito ( Form Filler ): https://addons.mozilla.org/firefox/addon/formito-form-filler/

Insane XML Import, Huge Project, Duplicate file names work around...

I planned on kicking off my journey attempting to edit a massive multi year documentary on FCPX with a nice introduction of the blog I'm going to keep about the experience, but I've run into a bit of a roadblock, or maybe major speed bump at least before even getting to that point. I wanted to share what is working as a work around for me and you guys can tell me how I'm doing it wrong.
Ok, I will try to explain this as succinctly as possible. I'll write in somewhat stream of consciousness just to try and get through it quicker... Basically, after discovering the work around below, I am now utterly confused on how FCPX handles the relationship between its own database of where media is stored, and the actual media itself. I have plenty experience on FCPX now, probably done 30-40 pro commercial jobs on it over the last year since XML became doable as I'm also a Resolve Colorist and all the FCPX projects where hardcore coloring product spots. For commercial work, I never needed to worry about splitting up footage up over multiple Events. Everything, all in one, FCPX handled it no problem. (well the occasional beach ball, but that seems to be a thing with FCPX in general)
This will be my 10th feature documentary as an Editor. Every one before it was either on Avid's many flavors over the last 12 years or FCP Studio. When this new film came along, I made the decision a few months ago to use FCPX for a few reasons, but mostly because I'm insane and I like to try to mix it up for myself in a career that can get stale quick if you aren't willing to be that way. The film was shot over 2+ years, every shoot was multi cam 5D (yes i know, looks great, but please kill me), I haven't done the math on length, but there is over 10,000 clips of video (this is actually medium in size compared to what I've dealt with before). Its 5D, so theres external audio for everything. FCPX's syncing is great, but I've learned that theres an unsaid window of heads and tales clips must fall within to sync properly with the nearby clips, if they are too far apart FCPX gives up. One shoot day could have 3 cams, 50 clips each, and 2 audio files to sync to, FCPX simply cannot handle this, so off to Plural eyes they went, no problems.
Ok, all this is relevant eventually I swear! Again, in the past, all in one event, no problem. I tried for fun to bring all media into one Event on this film. It worked, but there is a 10+ second spinning beach ball for every single move you make, so thats no good. Ok, I'll separate the Events out to, lets say, each shoot month. Well that's dumb, in verite documentary, any shot could be the first, any shot could be the last, you need a command over all searchable footage at all times. Shift selecting all events to search *****, and it actually takes longer for FCP to reload each event each time than it does to just have the one massive one. So no go there. Next hair brained idea... What if make a new Event that is just Compound Clips of all the other Event's contents and do more with Markers and Favorites in logging that I was planning to parse it all out. That way I'm working with and FCPX is dealing with 50-60 clips instead of 10,000+ Quick test, Cmd-A, Opt-G, boom, boom, boom, move all to dedicated to Event, hide huge Event, BEHOLD, that works! FCPX chokes a little bit on the insane length of some of the clips, but searching, and general performance is back on par!
So your saying to yourself "Ok *********, sounds like you figured it out, what's the problem." Well to you I say, "Not so fast!" Remember, that was just a quick test using the media I had imported into the massive 10,000+ clip Event. To do this project proper, I am having to import Multicam sync'd XMLs from Plural Eyes. And this is where it all starts to fall apart. A little foreshadowing for your eager eyes. 10,000+ files all shot with multiple 5D's over the course of years. What does that mean? many, many duplicate file names!
FCPX as well all know irritatingly imports XML's as new Events, not into existing ones. This obviously takes a lot of burden off media management because with a new Event comes a new database referencing its own version of the raw media. All well and good, and I'm betting its starting to click for some if you advanced users where I'm finally going with this. So I have 50 or so XMLs to bring in, all done no problem. Now I want to replicate that singular Event like I did with the Compound Clip test and have it all in one place to be my master as extensive logging begins for easy searching once editing begins. Highlight the Events, click Merge Events. NOPE. I get a new "Kill Yourself Now" error (a term I coined for Out of Memory and General Error messages in FCP Legacy meaning there ain't much you can do about it): "Two or more files have the same name. Change the names and try again, because I don't know what the **** to do with them." Ok I made up that last part but that's basically what it's saying. Just take the variable out of the equation, this happens with every which way you could try to get the clips together. Merge Events, dragging events on top of each other, dragging just the Multicam clip alone, nothing gets passed that message. What's worse is that while Batch Renaming seems like a solution, the renames do not populate inside the created clips and there is no way to Batch Rename those. Renaming everything at the finder level isn't so great because then I'd have to resync and theres an offline/online thing going here where the film has to be reconformed eventually.
Basically, I've found that FCPX handles media management in completely different ways depending on whether you are importing into one Event yourself or doing essentially what is a new import with FCPX moving or merging Events. If you bring in all the media to one Event, on a macro level FCPX goes through file by file making aliases referencing the master file. If it hits a duplicate, it makes a parenthesis counter, and keeps going. And with the genius of FCPX metadata, that file name doesn't even matter, you can change it at the Finder level and FCPX will keep the link intact. BUT for some reason if you try to do this outside the realm of a single Event and combine files after the fact a different process takes over in creating this database system and can't handle the duplicates. I can't totally figure the reason other than it probably is scared to change the originally referenced alias to something else (which it shouldn't be scared of since Merge Events deletes the original anyway).
This is where it gets INSANE and where I lose all understanding of what is going on, and believe me it was a delicate understanding to begin with. It comes in to play with the work around I figured out. I make the master Event with the 10,000+ clips. Then I import all the XMLs as dedicated Events. Now, I then drag the Multicam clips into the master Event, it WORKS! just takes it, no "Kill Yourself Now" error. Stranger still, now with the switched referenced Event, it even takes into account which aliased duplicate file name it's referencing in the Original Media folder. Somehow, it's taking into account the original file path and saying "Ok, I see 5 instances of MVI_5834.mov. Based on the original file path or maybe creation date or god knows what, it must be MVI_5834 (fcp3).mov." It connects perfectly. I can even remove the old XML imported Event with no problem. Crazier yet, I can now move those again to the dedicated Event I wanted originally that only contains those Multicam or Compound Clips.
So instead of going straight from A to C, going from A to B to C works even though that actually seems way more complicated. Why can't FCPX handle Merge Events and dragging clips the same way it handles media imported into a single Event. And weirder still, why can't FCPX handle the (fcp1,2,3...) appending in the same scenario. But if the appended links are already there, No Problem. And for the love of god, it'd be nice to important XML's into existing Events and make the correct referencing happen right from the get go, which is really the source of all the above headache. I'd have no problem helping FCPX with a little manual pointing in the right direction just like any other NLE needs.
Ok, having said all of that crap above, my question is, have I missed something completely simple I should have done instead? Now that I have everything in place how I originally envisioned, I think I will still play around a little bit more to make sure FCPX is really going to be able to handle this project. I'm at a stage right now where going another direction is still an option, although the dare devil in me wants to make this work. Media management aside, once you start editing on a FCPX timeline, its hard to go back to anything else. Apple is going to have to figure out some way not to access to everything at all times to work fluidly or big projects like this are never going to be practical in FCPX.
Sorry for the long confusing post....

I'm having the exact same problem, but I know nothing of ruby scripts. I've exhausted my resources with tech support, and after literally hours of work with them it seems I now am faced with either re-rating each individual song, or pointing iTunes to each song that it can't locate. Is yours a solution that could help me? How can I find out more about Ruby Scripts? Thanks for your help, hellolylo (or anyone else who might also be able to help...)
Kenn

Changes to OITM Item Name replicate to RDR1 Dscription on open order lines

Hi
A quick question, does anyone know if it is practical to have changes to an item's Item Name field replicated to sales orders RDR1 Dscription field on orders which have open lines for that item?
Scenario we face is when an item is made 'obsolete' standard practice is to mark it inactive and edit the OITM Item Name field to contain 'Obsolete'.
We may have sales orders with lines open for this obsolete part which we need to be automatically updated if the original data changes.
Thanks in advance for advice or guidance.

Hi Marli,
Try this:
IF $[RDR1.U_Label] = '2'
SELECT Case T0.U_UPCChoice
When 1 THEN T1.U_UPCRetail
WHEN 2 THEN T1.U_UPCLoc
WHEN 3 THEN T1.U_UPCItem
WHEN 4 THEN 'Look at Attachment'
END
FROM dbo.OCRD T0, dbo.OITM T1
WHERE T0.CardCode = $[$4.0.0] AND T1.ItemCode = $[$38.1.0]
Thanks,
Gordon

HT1414 the iphone software update server could not be contacted.a duplicate file name was specified , please help as this is driving me nuts,does anyone know which file it could possibly be ?

Hi could anyone help me out? my iphone 3gs keeps restarting itself every two minutes which i think is some kind of software issue,now there are a number of things i have done starting with putting in a new battery.when i charge the phone it resets itself every two minutes or so and the battery indicator stays at 4% so i decided to restore the phone on itunes (which is the latest edition) and when i connect my phone which i have put into recovery mode using the buttons, i get an error message saying :- the iphone software update server could not be contacted.a duplicate file name was specified. i have tried re-installing i tunes and that doesn't solve the issue and i have trawled through the program files to see if i could spot the duplicate but without success ,has anyone had the same issue and resolved it?

An iPhone 3G cannot be updated beyond iOS 4.2.1...that's the end of the line for your phone.

How to delete duplicate items in SQ01 output

Hi,
I created a query to extracted fixed asset from table ANLZ join ANLA, ANLZ for legacy fixed asset upload. But in the output list , every fixed asset line item is output by triple line items. How can I do to delete the duplicate items when output. Thanks.

Hi,
could you explain please what you did to remove duplicate / redundant lines?
I am facing the very same issue in an SQVI report I made recently: the line item results are 5x more then necessary (when document has 5 item lines), etc.
Thx in advance

There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder.

Post Author: dmface15
CA Forum: Administration
I am working in a new enviorment and i am trying to save a report to the Crystal Server via the CMC. I am uploading the report from the objects tab and attempting to save to a folder. The report has 1 static defined parameter and that's it. When i click submit to save the report i receive the following error message: "There was an error while writing data back to the server: Failed to commit objects to server : Duplicate object name in the same folder." There is not a anothe report within the folder with that name. What could be causing this error message and equally important, what is the solution.

hte message you received about duplicate user probably means something hadn't fully updated yet. Once it did then it worked...
Regards,
Tim

Cannot use duplicate table name error in AMDP

Hi Experts,
I'm developing an application which has the following architecture
SAP UI5->Gateway->ABAP Managed DB procedures(AMDP)->HANA SP(Stored Procedure)
We are having a very peculiar problem where the gateway service works inconsistently for the same input data.
i.e If I execute the same service n number of times, I get the results successfully for say n-3 times but the other 3 times I get a "RFC Error :Error while executing Database procedure"
There is no change in the input data or DB table data during all the executions.
Running the stored procedure stand alone in HANA studio works all the time.
We tried executing the AMDP from SE24 and the same behavior occurred.
When trouble shooting we found that the exception occurs inside the AMDP when the call db procedure statement is executed.
Could you please advise what could be the possible reason for this any tuning parameter/unavailability of db connections?
Or could you please suggest some other troubleshooting mechanism by which we can zero in on the cause?
When I go in the debug mode I can see the exact error as
cannot use duplicate table name: [288] SAPXXX.ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE#stub#20140905055908: line 15 col 3 (at pos 492): cannot use duplicate table name exception:
where ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE is the AMDP class and method. SAPXXXis the schema.

I reported this to Adobe customer support on 11/29, and here is their response:
Wednesday, December 5, 2007 12:51:27 PM PST
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop Elements® 6.0.
I understand that images are deleted if you accidentally try to move
them to a folder that already includes a file of the same name.
Thank you for bringing this to our attention. I was able to replicate
this behavior as well. The best method to report errors of this nature
is using the following form on our website:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
Kind regards,
Alan C.
Adobe Web Support

Duplicate Item Name

Similar Messages

Maybe you are looking for