Duplicate Owner property in BOCONGEN and BOCONVISH

Hi,
We are on 5.0 SP11.
I added a custom field to BOCONGEN and generated the application. Building the application throws error
Public Property Owner() As Object' has multiple definitions with identical signatures for both BOCONGEN and BOCONVISH.
In the changelist code of these BOs the Owner property is defined twice, I checked the baseline version of code there is only 1 Owner property.
How can I get rid of the duplicate Owner property in these BOs. Please help.
Thanks,
Subhani.

Hi,
plz check the relationships of both BOs whether there are some double entries.
The source respectively target role names are considered as "normal" properties of each target respectively source BO.
Regards,
Wolfhard

Similar Messages

Mutiple users in owner property ofentity dimension

According BPC administration guide, "The Owner property takes user and team names as values. You can enter multiple names and teams separated by commas."
However, I have BPC\user1,bpc\user2 in the owner property, where BPC is the domain name, I get the error of us2 is not a valid user.

Hi Jianbai,
Would request you to implement SAP Note: 1294047 for this issue. Here is the excerpt:
BPC provides 'System user group' on Server Manager to get group users list from different domain. There is also another way to get different domain users list not by adding to the 'System user group'.User can use 'Custom Filter' functionality on admin console when user adds or modifies users.
For example,
1. Domain1\BPC_User1;Domain2\BPC_User2;..
2. Domain2\BPC_User*
3. Domain1\ BPC_User;Domain2\ BPC_User
Hope this helps in resolving your issue.
Regards,
Poonam

Error while adding owner property in nw bpc 10.1 unified model

Hi,
currently we are working on NW BPC 10.1 unified model.
while adding owner property in BW system for work status we are getting below error.
"Characteristic owner is not mapped to any attributes in the SAP HANA model."
Please suggest us where to add this owner property.
Regards
Anitha p.

Hi Gregor,
Thanks for your reply.
we applied that note.
We have few doubts while creating work status and BPF.
Our dimension is /ERP/COSTCNTR, so we have added ZPERF and ZREV attributes in ZCOSTCNTR and we have implemented BADI BADI_RSBPCB_SETUSER (enhancement spot RSBPCB_SETUSER).
My doubt is while creating ZCOSTCNTR infoobject do I need to take a copy of /ERP/COSTCNTR? I am getting short dump while doing this.
Regards
Anitha

How to change Owner property in KM

Hi masters.
I want to know how to change cm_owner property of a document that i am uploading with dynpro java. I have written a code to add new properties for document but i couldn't change the Owner of document. Here is my code for adding a new property :
if (wdContext.currentUserElement().getId() != null) {
IPropertyName propOwner =
new PropertyName(
PropertyName.createDisplayname().getNamespace(),
"Owner");
prop =
new MutableProperty(
propOwner,
wdContext.currentUserElement().getId());
propMap.put(prop);
This code is adding a new Owner property for document. So that after upload, i see 2 Owner fields in Misc. tab.
Thanks for replies.

Hello,
Do check this blog out:
[Dynamic properties setting in KM|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/645d4357-0701-0010-07bd-a2ea8c4d0aaf]
Also read : [Storing and retrieving properties in KM|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ab288d09-0801-0010-b183-b8254ed4793f]
[Developing a property filter in KM|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ee3a57-0701-0010-3e9a-ddae7e4e0521]
Regards,
Shailesh
Edited by: Shailesh Kumar Nagar on Feb 19, 2010 8:16 AM

BPC 7.5 - Multiple Usernames in the owner property for Work Status Update

Good Day,
We have an issue in our BPC system, where our organisation dimension(entity) has an owner property which is maintained with multiple usernames. The issues comes in when we have to update the Work status for locking. The system recognises the first username as the owner property and only that first username can change or update the workstatus in BPC. We have a problem with that because we have a team of people that manages process.
The error that we get when one of the usernames other than the first one tries to update the work status is - "User not a Manager/Owner, Work status cannot be updated".
Please advise of the solution we are BPC 7.5 SP17
Thanks,
Themba

Hi Themba,
We are combining Team and multiple users without issues:
Vadim

Error of Owner Property when create a BPF Template in BPC 7.5 Netweawer

Hi Expert
I found this error when I create a BPF Template in BPC 7.5 Version Netweawer . Could you please advise for solve it.
BPF: Validation error; member "AS001" in step "3-Sales Export Plan" has no active owners
BPF: Validation error; member "AS001" in step "3-Sales Export Plan" has no active reviewers
BPF: Validation error; member "A001" in step "1-Assumption " has no active owners
BPF: Validation error; member "A001" in step "1-Assumption " has no active reviewers
BPF: Validation error; member "AS001" in step "2-Production Plan" has no active owners
BPF: Validation error; member "AS001" in step "2-Production Plan" has no active reviewers
BPF: Validation error; drive dimension of Production Plan mismatched to previous step
Thanks for your advise
Suphawat

Hi,
In 2nd step of BPF template creation while defining step you should assign driver dimension by clicking on Define Step Region Criteria and choose owner property from that dimension.
Have you maintained Owner property in Entity dimension.If yes you can choose driver dimension as Entity and owner property as Owner.
Hope it helps..
regards,
Raju

Problem create OWNER property in C_GROUP

Hi All,
I've an issue while trying to create a new property called OWNER in the C_GROUP dimension.
Please refer to the screen-captures for the error.
I've also tried to create OWNER2 just to be sure the OWNER is not a reserved property name that are not allowed.
I'm using BPC 10 Microsoft version.
Please advise.
Thank you.

Hi Derek,
as Arnold wrote Owner is a reserved property used by work status and bpf, this means that only one dimension could contain a owner property.
You can find the dimension that contains the Owner property in admin console->application->work status settings the dim has Owner specified in "work status".
So if you want to change the dimension owner, you must change this property first, delete the property in the old dimension and add the owner property in the new dimension and after full process all dims again
But you will loose all previos work status lock previous used.
Like Arnold a question, before to start, are you using this property for another purpose then work status and bpf? If so better to stop and explain what do you want.
Regards
Roberto

No owner property specified for a dimensions - Work Status

Hi to all,
I have a problem. I am configurating a work status. I have specified my work states, I have created the property "OWNER" in the memberset of the dimension that I want to be the owner one and I have specified the user which is going to be the owner of the members, but when I go to the workstatus matrix inside an application, the system tells me that ther's no owner property in that dimension. But in fact ther is. Does someone have any idea?
Thanx
Oscar

Hi Sheldon,
Than for your answer. Regarding the ideas:
Q1: I have process and saved the dimension that contains the owner.
Q2: Which kind of hierarchy are you talking about? I set in application parameters the Approval Org to H1, and in the members set of the owner dimension, I specified my user as a owner of some properies, so that six porperties have only one father, my user, the owner.
Shall I change something?

Workstatus / Entity Owner property

Hi
I am trying to configure workstatus and would like to use a BPC team as owner in the Entity dimension.
I know this is possible in the Microsoft version.
In the NW version i get an error when I process the dimension with ADMIN is not a valid BPC user.
Can I use teams in the Owner column and how do I have to reference them.
Br
Jesper

Can u pls let me know how to put the team in the owner property of entity dimension.
We are in BPC NW SP02.
created a team called FinanceTeam.
I tried all combinations like Domain\FinanceTeam , [FinanceTeam] , etc etc.
But when I try to process the dimension, its giving the error " Not a BPC user".

I purchased my iMac used. When I try to update my apps the computer automatically fills in the previous owner's Apple ID and I can't change it. Any ideas?

I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

In SSRS , after exporting report in excel,wrap text property for cell and freeze column for SSRS table header not working in Excel

I am working no one SSRS my table headers are freeze cangrow property is false and my report is working perfect while rendering data on RDL and i want same report after exporting in Excel also , i want my table header to be freeze and wrap text property
to work after exporting in my report in excel but its not working ,is there any solution ? any patch ? any other XML code for different rendering ?

Hi Amol,
According to your description, you find the wrap text property and fix column is not working after exporting into Excel. Right?
In Reporting Services, when exporting to excel file, it has limitation for textbox.
Text boxes are rendered within one Excel cell. Font size, font face, decoration, and font style are the only formatting that is supported on individual text within an Excel cell.
Excel adds a default padding of approximately 3.75 points to the left and right sides of cells. If a text box’s padding settings are less than 3.75 points and is just barely wide enough to accommodate the text, the text may wrap in Excel.
In this scenario, it supposed to be wrap text unless you merge cells. If cells are merged, word-wrap does not work correctly. If any merged cells exist on a row where a text box is rendered with the
AutoSize property, autosize will not work. For the Fix Data Property, it can't be working in Excel. These are features when exporting to Excel. We can't change it because it's by design.
Reference:
Exporting to Microsoft Excel (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

no - you simply have to select the option to print mucliples of a photo on a page
select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
LN

On my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad

on my itunes library my albums are all sorted but when i put onto my ipod touch (4th Gen) it seems to duplicate i have checked everything and there are no spaces in the information my question is how do isort it because these things drive me mad i would be most gratefully if you could find a way to help
thatnks

Never mind, got it to work. I stumbled around on Google for a while and somehow ended up reading things from the 'jailbroken' community. They had easy instructions to get out of Recovery mode. Thanks anyway though!
P.S. For anyone who experiences this, here is the fix: Hold Power and Home in unison for 6 seconds, then power on as normal.

How do i remove duplicate songs on my ipod and in my library

how do i remove duplicate songs on my ipod and in my library

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
Fix the library, then syncing should fix the device.
tt2

My iPad Air 16 gb wifi not open and asking for an address and not mine and I am the owner of this device and I can not pave if there is a possibility of me to help me open it with my address as I opened before

asking for an address and not mine and I am the owner of this device and I can not pave if there is a possibility of me to help me open it with my address as I opened before

Read the following about, "Activation Lock".
http://support.apple.com/kb/ht5818

Duplicate Owner property in BOCONGEN and BOCONVISH

Similar Messages

Maybe you are looking for