Windows 8 installation failure

i'm trying to create a windows partition on my macbook air using bootcamp. the bootcamp assistant made it through the process of creating a usb install disk on a usb drive from a new downloaded windows8 iso, i selected the partition size where you (slide the divider) and after reboot the process stopped/failed. a bootcamp partition does not show up on the disk utility, the new partition is just missing and it just shows one drive that's now smaller (minus the size of the new slider partition i tried to create).
if i reboot now and hold the option key i see a windows and an efi drive i can boot from in addition to the mac drive. if i boot from the mac side all seems to be fine. in either of the other cases i can select the drive and try to install windows from my usb stick. i get as far as inputting my product key and then when it asks me where i want to install it there is no bootcamp partition there, just an EFI partition and everything else. i then just have to back out and reboot on the mac side. i don't know what to try next. I'm not even sure how to get back to where i started and remove the new partition? please help.

"mid 2012"
Last login: Tue Mar 17 08:19:13 on console
Michaels-MacBook-Air:~ michael$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         120.5 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *90.1 GB    disk1
                                 Logical Volume on disk0s2
                                 05333B52-DD1A-45C9-BEC0-7469029ABA81
                                 Unlocked Encrypted
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *4.0 GB     disk2
   1:                 DOS_FAT_32 WININSTALL              4.0 GB     disk2s1
Michaels-MacBook-Air:~ michael$ diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group B5F83529-B835-47B3-BB9B-1714B46AD734
    =========================================================
    Name:         Macintosh HD
    Status:       Online
    Size:         120473067520 B (120.5 GB)
    Free Space:   30012678144 B (30.0 GB)
    |
    +-< Physical Volume 895D4BEE-5560-4DF8-AE1E-75910991E0F8
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120473067520 B (120.5 GB)
    |
    +-> Logical Volume Family 97CFE77E-B44C-451F-9520-20E55729C915
        Encryption Status:       Unlocked
        Encryption Type:         AES-XTS
        Conversion Status:       Complete
        Conversion Direction:    -none-
        Has Encrypted Extents:   Yes
        Fully Secure:            Yes
        Passphrase Required:     Yes
        |
        +-> Logical Volume 05333B52-DD1A-45C9-BEC0-7469029ABA81
            Disk:                  disk1
            Status:                Online
            Size (Total):          90108067840 B (90.1 GB)
            Conversion Progress:   -none-
            Revertible:            Yes (unlock and decryption required)
            LV Name:               Macintosh HD
            Volume Name:           Macintosh HD
            Content Hint:          Apple_HFS
Michaels-MacBook-Air:~ michael$

Similar Messages

  • Windows Installer failure during download of iTunes 10.5.  Why is this happening?

    I'm trying to update to the newest version of iTunes, and I get all the way through the process until the very end.  I then get a message "There is a problem with this Windows Installer package.  A Program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."   I checked to be sure I an up to date with all of my Microsoft updates, so I don't think that is the problem.  Tried to download a couple of times, and keep getting this message.  Not very tech-minded, so maybe I'm skipping an important step, but I have loaded newer versions in the past with no problem.  Help, please!

    Go to 'Apple Software Update' in Add or Remove Programs icon in your Control Panel. Select Change, then Repair. Then rerun the iTunes installation.

  • OracleXE Windows installation failure (SQL Plus failure)

    winXP pro SP2 AMD Athlon, Oracle 10 g express edition: OracleXE.exe product version 10.2
    1. I have just downloaded OracleXE
    2. After several successful steps of installation
    (five new services are installed, four of them running)
    Creating database step 1 of 5 starts and then:
    a 'report error to microsoft' window is opened, saying
    Oracle SQL*Plus has encountered a problem an needs to close ....blah, blah..
    After closing this window Install Shield reports successful installation and when I try to launch the installed application (pressing Finish button),
    it does not work (I did expect this after sqlPlus failure)...

    There several logs in the oracleXE directory tree, can you advise me which could be of any relevance? (css.log, ....\database\sqlnet.log, ....\network\sql.log, listener.log, oradim.log, XE.bat.log)
    I also discovered, that the installation works on another similar machine (I had to start a service manually after processor usage jumped to 100%), but on that machine an oracle client was installed previously.
    On the machine where installation is causing problems, no oracle product has been installed previously !
    Also - Regional settings for this machine are not English(US)

  • Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

    Hello,
    I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
    I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
    Failed to install the new preview build, please try again later. 0x80246007
    What could be the problem?
    Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
    for this VM. Now that I have this 80246007 error code.
    When looking up System log, the following error messages are listed multiple times:
    Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
    The errors are returned for the Event ID 20 by WindowsUpdateClient
    in task category Windows Update Agent..
    I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
    registry key as suggested in Windows
    Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
    "BranchName"="fbl_awesome1501"
    "ThresholdRiskLevel"="low"
    "ThresholdOptedin"=dword:00000001
    Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
    However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.  
    Looks like Setup is having problems installing in a Hyper-V virtual machine.
    Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
    Any clue why installing under VM causes 9926 to fail?
    Thank you in advance.
    Well this is the world we live in And these are the hands we're given...

    Hi,
    According to the error message, this problem seems like update package installation failed during system upgrade.
    You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
    On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
    Roger Lu
    TechNet Community Support

  • Installation Failure: Windows failed to install the following update with error 0x800F0922

    Hi folks,
    I have a HP Elitebook Folio 9470p.  It came with Windows 8, and I installed it on my corporate domain.  I was trying to do some Windows updates so  I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
    to install them one at a time or all of them.  It has about 18 updates it needs from security updates to a .net framework update.  I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
    all up to date.
    I'm at a loss as to what to do.  It gives this error in the event log for each file, Event ID 20.
    Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
    This is the example for KB2862152, but it gives the same error for every one.  I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
    I also deleted folders and files from the SoftwareDistribution folder as well, to no avail.  Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
    Thanks for any help!

    Hi MM. Mr Kywildcat and Vegan Fan,
    GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information  pnly - hoping this could help someone - I resume some actions which allowed this the happy end
    1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
    2) I was influenced by the fact that this
    0x800F0922  error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
    3)   Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
    (whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for  x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
    4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
    5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
    KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
    --> always succesful.
    I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
    to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
    0x800f0922, but 0x80004003 :
    2014-02-15 21:29:13, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2014-02-15 21:29:13, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-02-15 21:29:18, Error  CBS    Startup: Failed to process advanced operation queue, startupPhase: 0.  A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
    Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
    issue remains until maybe a new KB corrects it, wrong :-) ?
    And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts. 
    Phil   

  • Windows 8 installation failure with German language pack

    Hi,
    I have a Lenovo ThinkPad Edge E330 with Windows 8. We just received it over Xmas - nice product. Just one Thing so far: I can't get the German language pack installed. Language, Keyboard layout and other regional Settings are set to German. After downloading the German language pack through Language->German->options->Download and Install Language pack (German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP])I always run into the following error during the Installation (download seems to be fine, error happens after about 2/3 of the Installation - if you believe the Progress bar). From the Event Viewer:
    Installation Failure: Windows failed to install the following update with error 0x80070002: German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP].
    I already tried quite some stuff without success: no pending Upgrades, several reboots, switching off Firewall/anti-Virus, selective reboot just with Winodws Services and Startup stuff, ... No success.
    Does anybody have seen a similar Problem? Anybody with a solution to get the German language pack finally installed?
    Thanks in advance for your Support,
    Ingo
    Event-Details:
    System
    Provider
    [ Name]
    Microsoft-Windows-WindowsUpdateClient
    [ Guid]
    {945A8954-C147-4ACD-923F-40C45405A658}
    EventID
    20
    Version
    1
    Level
    2
    Task
    1
    Opcode
    13
    Keywords
    0x8000000000000028
    TimeCreated
    [ SystemTime]
    2012-12-28T10:06:26.588367000Z
    EventRecordID
    2032
    Correlation
    Execution
    [ ProcessID]
    388
    [ ThreadID]
    2640
    Channel
    System
    Computer
    Lenovo-PC
    Security
    [ UserID]
    S-1-5-18
    EventData
    errorCode
    0x80070002
    updateTitle
    German Language Pack - Windows 8 for x64-based Systems - (KB2607607) [de-DE_LP]
    updateGuid
    {B9991A98-7903-4A91-B17A-818B1C1D9633}
    updateRevisionNumber
    200
    serviceGuid
    {9482F4B4-E343-43B6-B170-9A65BC822C77}

    Hi SOL
    For more information , please find the below download link.
    http://software.cisco.com/download/release.html?mdfid=282806052&release=8.6.6&relind=AVAILABLE&flowid=221&softwareid=282774363&rellifecycle=&reltype=latest
    Thank you
    please rate all useful information

  • Windows Server 2008 (TS) and Lync Web App installation failure

    Hey folks,
    I've run into a little big problem due the Lync Web App installation via mstsc on a stand alone Terminal Server 2008 SP2 64 Bit. When I tried to install the Lync Web App Plugin via
    mstsc and standard user I get the message:
    "The system administrator has
    set up a policy that the installation
    prevents"
    Till that it's just fine.
    The next thing I did is to disable the UAC and DEP, but same problem as above. I also tried to extract the install EXE for the MSI packages to allow the installation. But did not work.
    After I searched the internet for an answer relating to this problem I've had to create or change a RegEdit entry. So I switched to the registry to:
    HKEY_Local_Machine\Software\Policies\Microsoft\Windows\Installer
    and created a DWORD entry DisableMSI and set it to 0. Then I tried the installation of Lync Web App Plugin via
    mstsc and standard user again and this message appeared:
    "The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2755"
    Now the curious thing is, that when I am logged on locally, the standard user is able to install the Lync Web App Plugin. And it works fine. After the installation is complete I can switch to mstsc again and it works.
    The only thing what doesn't work is to install Lync Web App Plugin via mstsc into the user profile.
    Any suggestions?

    Before you install the application, change your user mode to installation mode.
    You can run the following command with Prompt Command:
    Change user /install
    After the application is installed, change back to execution mode, you can do so by running the following command:
    Change User /Execute
    Lisa Zheng
    TechNet Community Support

  • Windows 7 installation failure - Partition removal failure

    Having an issue...
    Have newish 27inch with latest SL build. Bootcamp 3.02. Tried to install Windows 7 (64 bit, which is probably the mistake). Made it most of the way through the installation process, then the screen started to hang for while... had no choice, had to reboot. Long story short, I eventually had to restart (hold option) to boot into OS, and then remove the partition. Problem is, even after I removed the partition from bootcamp, whenever I restart my machine, if I don't hold down option, it goes to a black screen looking for a bootable disk. It thinks it's still trying to boot to windows, even though the partition has been removed. Aside from blasting the OS away, any work arounds??
    thanks much

    Thanks for the info - forgot to check the start-up preferences...
    Been reading a bunch of notes on the Window's 7 installation, more workarounds then expected but it seems manageable. After getting the partition setup, rebooting, and getting into the windows installation setup, the partition that I setup was marked as 'not formatted properly' (as mentioned in the bootcamp installation guide). However, the "next" button was grayed out, not allowing me to continue. So, I tried formatting the partition from within the widows setup and everything seemed to work until the second reboot (post installation).
    I'll go back and research more - thanks for your quick and helpful answer.

  • How to use property Upgrade Code in detection method "Windows Installer"?

    Hi
    I am a packaging specialists helping our deployment guys to add our software (100rds of installers) as application entries in SCCM 2012. The methods supplied by SCCM seem however quite generic and limited.
    The detection method "Windows Installer" is hardcoded to use the Product Code, why?
    Normal detection of Windows Installer packages are done using the Upgrade Code and the Product Version. Is it possible for us our self to add/reconfigure to use that method or are we forced to use the custom detection method?(both those methods should be provided
    by SCCM to better match Windows Installer architecture)
    Ps. It says in http://technet.microsoft.com/en-us/library/bb632336.aspx for Version that "This
    must be in the standard Windows Installer four-part version number format.", but the version number is 255.255.65535 (which is real stupid) as described by http://msdn.microsoft.com/en-us/library/aa370859(v=vs.85).aspx. Ds.
    Regards
    Pär

    Under LV 7.1 with DSC installed I get the same error code (-2147418113) but "explain error" gives me this.
    "LabVIEW DSC:  (Hex 0x8000FFFF) Catastrophic failure."
    This prompts the question is it possible to set an activeX object running in a container for Full Screen.
    This is probably a Q for MS.
    If it look like it is possible, try to get a VB example and that will tell us what we have to do to make this work.
    Ben
    Message Edited by Ben on 10-31-2005 04:45 PM
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Here's How to Repair your Windows Installation

    Sometimes it is necessary or desirable to repair your Windows installation.  For instance, you might see Windows showing unusual or unexplained slowdowns, failures to boot, devices no longer working like they used to, etc.
    The following step by step procedure shows you how to do the repair.  Note, that you will need the CD key that came with your Windows disk to complete this procedure.
    1.  Make sure boot order in BIOS is set to floppy (if you have one), cd/dvd, and then the HDD your original Windows was installed on.
    2.  Insert your original Windows CD into your cd/dvd drive (a slipstreamed cd with SP will also workif you have one).  If the Windows Installion menu appears, select Install Windows.
    3.  If that menu does not appear, go to Start, Turn Off Computer, and then select Restart.  After the POST, you will see a prompt, "Press any key to boot from cd..."
    so press the space key (any other key will also work).
    4.  Let Windows setup continue.
    5.  After a short while you will see an option to repair your Windows using the Recovery Console.  Do NOT select this option.  Just continue.
    6.  Soon after this you will see a message "Searching for a previous Windows Installation".
    7.  When Setup finds your previous Windows installion you will be given an option to Repair that installation.  Follow the prompt on the screen, i.e, press R to repair.
    8.  Now just let setup continue until it is complete and you see your desktop.
    9.  Then, go to Windows Update (Start, All Programs, Windows Update) and let it search for and install any available service packs, and/or other updates.
    10. Lastly, if you have any drivers that are wish to use other than the ones in Windows, just install them in the normal fashion.
    Now your Windows is repaired and fully updated, and hopefully the problems you saw previously have been fixed.

    Quote from: Mike V on 30-January-07, 08:38:09
    Thanks Bosskiller.
    It seems everytime I do a fresh install I have trouble getting my cable internet going again.
    I always seem to forget which files I need to download for the mobo to have access to that.  ???
    pickup drivers from here: http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=436&kind=1
    what OS you use?
    "It seems everytime I do a fresh install I have trouble getting my cable internet going again."
    where its connected via ethernet port or via USB port? if you connect it through on-board LAN you need to install chipset drivers 1st. if you connect it via USB port ensure your OS installation is with included SP2 on it if its XP. then install chipset drivers as well.
    if you use 98 install USB 2.0 drivers 1st,(http://download.msi.com.tw/support/dvr_exe/mbd_dvr/USB2W9XME009.zip) before install cable modem.

  • Acrobat X pro installation failure

    I always have had problem with Acrobat installation.
    Last time it make me completely reinstalled Windows before I can successfully installed Acrobat. However, recently my Win 8.1 pro has had problem so I decided to reinstall Windows from scratch. Again, I encountered Acrobat installation failure.
    Here are the error messages:
    ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
    ----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
    WARNING: DF012: File/Folder does not exist at L:\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
    ----------- Payload: {4FAB339E-2132-434F-9376-9CD735E4C69C} Adobe Flash CS6 12.0.0.0 -----------
    ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 151)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050: - Acrobat Professional: Install failed
    Infact, the Creative Suite is the very few first applications I installed after Windows set up.
    Any clues on why this happens. I'm tired of reinstalling Windows again and again. But Acrobat is important for me.

    Errors "Exit Code: 6," "Exit Code: 7"
    Mylenium

  • Windows update failures over the past several months

    I'm having the same issues regarding windows update failures as many documented in this forum. I have run the repairs recommended, drive scans, etc. with no success. I'm at the point that I think that it would be better to cut off the update notice. I have
    zipped up the files recommended and posted them on my skydrive site. That location is https://onedrive.live.com/?cid=C1221863E15FBC11&id=C1221863E15FBC11%211274.
    Please help. Joe Collins
     

    at the point that I think that it would be better to cut off the update notice.
    You may be right.  Try eliminating WU from a symptom description.  E.g. pick one of the updates which is available as a download and try installing it that way.  Just use WU as a guide for what you should download and install manually. 
    I imagine that if that works eventually WU will repair itself and realize that it doesn't need to do anything else for you.
    A search to support the idea of manual download and install acting as a workaround for this symptom:
    http://www.microsoft.com/en-us/search/results.aspx?q=0x800f0922%20CBS%20download
    <quote>
    Well, when I try to download Office 2013 updates, about 15 of them, they installed fine.
    </quote>
    Also
    http://social.technet.microsoft.com/Forums/windows/en-US/7060c961-3b7c-42ba-ad84-008c357478d8/installation-failure-windows-failed-to-install-the-following-update-with-error-0x800f0922?forum=w8itprogeneral
    (Microsoft search for
        [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
    Another suggestion which could be implied by your diagnostics would be to uninstall your Norton package (and any of the other interferers which are mentioned that would be suspect).  Norton is notorious for interference with updating and is also known
    to interfere even when it is supposedly disabled and is also known interfere even when it has supposedly been uninstalled, so who knows what the cause of the problem is, corruption or blocking, you could at least change your POQexec.log by taking such
    manual action.
    BTW what have you done exactly about trying to repair WU?  You could save yourself a lot of manual effort if you could get it working properly.  
    Otherwise, on the manual update tack I would try doing first the ones which arrive in pieces.  Search WindowsUpdate.log for  Downloading  for clues that way.
    Good luck
    Robert Aldwinckle

  • HP PSC All-In-One Installation Failure

    My wife has a HP Pavilion with Windows XP Home. She had a HP OfficeJet J4550 that we installed, but it would not Fax despite several attempts. I had a PSC AIO 2400xi that worked fine with my Windows XP, but I purchased a HP Pavilion with Windows 7 and it would not function the way I needed, so we decided to swap. I used the J4550 uninstall bat on my wifes, running it four times to level 4.
    I then installed the psc 2400xi on her machine but the installation failed (2608 or something like that), I then used the uninstall bat and ran it through level 4. Then attempted to install again, but the same failure at the same location. I then downloaded the latest full install package from HP, ran it and it again failed. I then ran the uninstall bat and the all-in-one printer removal utility as well, then tried to install, again it failed, but it gave a message to continue. I clicked on "Continue" and it began a removal process and cleanup. I started working with the HP techs and went through a variety of things that has left my wife's computer with a small, but aggravating problem. Whenever we click on My Computer, My networks, Recycle Bin, and Windows Explorer, we get a message, "Windows Installer" trying to load SmartWebPrintingOC disk 1, but there isn't a disk one and we haven't to our knowledge tried to load SmartWebPrintingOC unless it was part of the psc 2400xi install.
    We have removed all temporary files and those HP pinter files that were suggested by the HP tech, I have ran msicuu2.exe and another suggested by someone. Although I removed both via the Control panel I found one still in the Toos protion of CC Cleaner, when I clicked on it the Cleanup Process began, but my problem is still there.
    Can anyone help, it's been several days since the last tech said they would have their engineers look at it for a solution.
    Thanks
    Terry

    Hello psak12,
    I would recommend buying a color cartridge as well as a black one because if a printer is low on ink it can cause the alignment to fail. Also, using refilled ink could cause that also. I would recommend getting genuing hp ink cartridges so that the printer would be able to read the ink levels properly and this should allow you to print out an alignment page. I hope that this is helpful.
    Although i work for HP, my replies are my own and i am not an official spokesperson

  • (2008 R2) AD RMS Installation Failure: ALTER DATABASE failed because a lock could not be placed on database

    First-time install on a SBS 2011 server, name replaced as <SERVER> for this post. I had created a separate IIS site rather than using the Default Web Site and I am guessing this might be a permission issue on the folder...
    Installation failed with Event ID 110 and a repeating error that states, "<Error>: Attempt to configure Active Directory Rights Management Server failed. The provisioning process failed to create the Configuration database due to the following
    error from Sql Server: System.Data.SqlClient.SqlException: ALTER DATABASE failed because a lock could not be placed on database 'DRMS_Config_adrms_<SERVER>_local_443'. Try again later. ALTER DATABASE statement failed. ALTER DATABASE failed because a
    lock could not be placed on database ." Configuration as follows:
    <Informational>: This server might need to be restarted after the installation completes.
    Active Directory Rights Management Services
    Cluster Type
    Root cluster
    Trust Hierarchy
    Production
    Configuration Database Server
    Windows Internal Database
    Service Account
    <SERVER>\adrms
    Cluster Key Storage
    AD RMS centrally managed key storage
    Cluster Web Site
    Active Directory RMS
    Cluster Internal Address
    https://adrms.<SERVER>.local:443/
    SSL Certificate
    Create a self-signed certificate
    Licensor Certificate Name
    <SERVER>
    Register SCP
    Register now

    Hi Ahmad, I have the same problem, I have a server windows server 2008 R2 standard. While
    doing an Enterprise to Standard downgrade, I have removed enterprise edition of SQL Server 2008, rebooted and while installing standard edition, I get the below error saying "You SQL server 2008 installation completed with failures. Some or all identity
    references could not be translated"
    Bit of background. This server has another express instance of SQL Server 2008. I have
    used local system account, network service as well as our general SQL service account, but I get the error towards the end of the installation and it fails saying “Some or all identity references could not be translated.”
    I am installing a named instance with the same name as before but fails. I have tried
    creating a new test instance that fails too. Any ideas? I have uninstalled SQL enterprise edition from
    Add and Remore Programs/Programs and Features. I've also run the Windows Installer CleanUp Utility but no joy.
    Cheers

  • Workflow Manager 1.0 - Service Bus 1.0 installation failure

    On a SharePoint 2013, I am trying to set up Workflow Manager 1.0 (version: 2.0.20922.0) using WPI 5.0 (version: 7.1.50430.0).
    Windows Server version: Microsoft Windows Server 2008 R2 Datacenter [Version 6.1.7601] SP1. Locale: en-gb.
    SharePoint Server 2013 version: 15.0.4569.1000
    WPI installer fails at step 2.
    Step 1: Execute ASP.NET IIS registration tool - is installed successfully. However, Step 2 fails:
    Step 2: Service Bus 1.0. Gives following error
    Windows event logs:
    Product: Service Bus 1.0 -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action EnableUAC, location: C:\Windows\Installer\MSI41C2.tmp,
    command: "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Service Bus 1.0\Service Bus PowerShell.lnk" "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Service Bus 1.0\Service Bus Configuration.lnk"
    WPI log.txt:
    DownloadManager Information: 0 : Starting install sequence
    ThreadId=7
    DateTime=2014-06-30T15:04:30.5393958Z
    DownloadManager Information: 0 : Using cached file at C:\Users\admin\AppData\Local\Microsoft\Web Platform Installer\installers\ServiceBus\F35D6168BD14B4B152877F9ADECD16B90D6A0F6E\Service_Bus.msi instead of downloading from http://go.microsoft.com/fwlink/?LinkID=258757&CLCID=0x409
    ThreadId=3
    DateTime=2014-06-30T15:04:30.5462502Z
    DownloadManager Information: 0 : Using cached file at C:\Users\admin\AppData\Local\Microsoft\Web Platform Installer\installers\WorkflowManager\99C4319912D17F33BA408A096B163A2132193A93\Workflow_Manager.msi instead of downloading from http://go.microsoft.com/fwlink/?LinkID=258761&CLCID=0x409
    ThreadId=3
    DateTime=2014-06-30T15:04:30.6050022Z
    DownloadManager Information: 0 : Starting EXE command for product 'Execute ASP.NET IIS Registration tool'. Commandline is: 'C:\Windows\sysnative\cmd.exe /C C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe -iru'. Process Id: 8276
    ThreadId=7
    DateTime=2014-06-30T15:04:30.6471078Z
    DownloadManager Information: 0 : Install exit code for product 'Execute ASP.NET IIS Registration tool' is '0'
    ThreadId=7
    DateTime=2014-06-30T15:04:41.9431590Z
    DownloadManager Information: 0 : Install return code for product 'Execute ASP.NET IIS Registration tool' is Success
    ThreadId=7
    DateTime=2014-06-30T15:04:41.9470758Z
    DownloadManager Information: 0 : Product Execute ASP.NET IIS Registration tool done install completed
    ThreadId=1
    DateTime=2014-06-30T15:04:41.9480550Z
    DownloadManager Information: 0 : Increasing current install to 2
    ThreadId=1
    DateTime=2014-06-30T15:04:41.9480550Z
    DownloadManager Information: 0 : Starting MSI install for msi 'C:\Users\admin\AppData\Local\Microsoft\Web Platform Installer\installers\ServiceBus\F35D6168BD14B4B152877F9ADECD16B90D6A0F6E\Service_Bus.msi', commandline: 'WEBPI=1 ACTION=INSTALL REBOOT=ReallySuppress'
    ThreadId=7
    DateTime=2014-06-30T15:04:41.9539302Z
    DownloadManager Information: 0 : MSI install return value for product 'Service Bus 1.0' is '1603'
    ThreadId=7
    DateTime=2014-06-30T15:04:50.0891238Z
    DownloadManager Error: 0 : Install return code for product 'Service Bus 1.0' is Failure (There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. )
    ThreadId=7
    DateTime=2014-06-30T15:04:50.0891238Z
    DownloadManager Information: 0 : Product Service Bus 1.0 done install completed
    ThreadId=1
    DateTime=2014-06-30T15:04:50.0901030Z
    DownloadManager Information: 0 : Increasing current install to 3
    ThreadId=1
    DateTime=2014-06-30T15:04:50.0901030Z
    DownloadManager Information: 0 : Service Bus 1.0 installation log: C:\Users\admin\AppData\Local\Microsoft\Web Platform Installer\logs\install\2014-06-30T16.04.30\Service_Bus.txt
    ThreadId=7
    DateTime=2014-06-30T15:04:50.0901030Z
    DownloadManager Warning: 0 : Dependency failed for product 'Workflow Manager 1.0'. Skipping install
    ThreadId=7
    DateTime=2014-06-30T15:04:50.0901030Z
    DownloadManager Information: 0 : Product Workflow Manager 1.0 had a dependency fail. Increasing install product to 4
    ThreadId=1
    DateTime=2014-06-30T15:04:50.0920614Z
    Service_Bus.txt:
    MSI (s) (04:C8) [16:04:49:994]: Executing op: ComponentUnregister(ComponentId={BD089387-D1F2-4012-B269-D38D5446C031},ProductKey={F438C511-5A64-433E-97EC-5E5343DA670A},BinaryType=1,)
    MSI (s) (04:C8) [16:04:49:995]: Executing op: ComponentUnregister(ComponentId={E7AC164F-EFA7-41AE-9A55-8A4762FFDB1F},ProductKey={F438C511-5A64-433E-97EC-5E5343DA670A},BinaryType=1,)
    MSI (s) (04:C8) [16:04:49:996]: Executing op: ComponentUnregister(ComponentId={47014104-90AA-4143-B004-91BBF9764BF2},ProductKey={F438C511-5A64-433E-97EC-5E5343DA670A},BinaryType=1,)
    MSI (s) (04:C8) [16:04:49:996]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)
    MSI (s) (04:C8) [16:04:49:996]: Error in rollback skipped. Return: 5
    MSI (s) (04:C8) [16:04:50:008]: Note: 1: 2318 2:
    MSI (s) (04:C8) [16:04:50:011]: No System Restore sequence number for this installation.
    MSI (s) (04:C8) [16:04:50:011]: Unlocking Server
    MSI (s) (04:C8) [16:04:50:018]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
    Action ended 16:04:50: INSTALL. Return value 3.
    MSI (s) (04:C8) [16:04:50:040]: Note: 1: 1708
    MSI (s) (04:C8) [16:04:50:040]: Product: Service Bus 1.0 -- Installation failed.
    MSI (s) (04:C8) [16:04:50:041]: Windows Installer installed the product. Product Name: Service Bus 1.0. Product Version: 2.0.20922.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
    MSI (s) (04:C8) [16:04:50:046]: Deferring clean up of packages/files, if any exist
    MSI (s) (04:C8) [16:04:50:047]: MainEngineThread is returning 1603
    MSI (s) (04:C4) [16:04:50:065]: RESTART MANAGER: Session closed.
    MSI (s) (04:C4) [16:04:50:065]: No System Restore sequence number for this installation.
    === Logging stopped: 30/06/2014 16:04:50 ===
    MSI (s) (04:C4) [16:04:50:069]: User policy value 'DisableRollback' is 0
    MSI (s) (04:C4) [16:04:50:070]: Machine policy value 'DisableRollback' is 0
    MSI (s) (04:C4) [16:04:50:070]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (04:C4) [16:04:50:070]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (04:C4) [16:04:50:071]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (04:C4) [16:04:50:072]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (s) (04:C4) [16:04:50:072]: Restoring environment variables
    MSI (s) (04:C4) [16:04:50:074]: Destroying RemoteAPI object.
    MSI (s) (04:98) [16:04:50:075]: Custom Action Manager thread ending.
    MSI (c) (F8:04) [16:04:50:080]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
    MSI (c) (F8:04) [16:04:50:082]: MainEngineThread is returning 1603
    === Verbose logging stopped: 30/06/2014 16:04:50 ===
    Any pointers are appreciated.

    Hi,
    Here are some links about the similar issue for you to take a look at:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/560b3f29-450c-4ef4-9076-03caaa45e62a/workflow-manager-10-were-sorry-the-product-failed-to-install?forum=sharepointadmin
    http://support.esri.com/ja/knowledgebase/techarticles/detail/28695
    http://blog.riccardocelesti.it/2013/02/01/workflow-manager-setup-issue/
    More information about how to install and configure workflow for SharePoint Server 2013 for your reference:
    Install and configure workflow for SharePoint Server 2013
    http://technet.microsoft.com/en-us/library/jj658588(v=office.15)
    Video series: Install and configure Workflow in SharePoint Server 2013
    http://technet.microsoft.com/en-us/library/dn201724(v=office.15).aspx
    Best regards
    Dennis Guo
    TechNet Community Support

  • CS6 installation failure for some applications

    Windows 7.
    After the installation process was complete I was notified that some of the applications failed to install:
    Ps; Ai; Fl; Id.
    An error list was provided with many cryptic reasons for failure, such as:
    ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw". Error 145 The directory is not empty.(Seq 956)
    These are interesting, no doubt, but useless for helping me to solve the problems.
    My question is: how can I get Adobe to help me with what seems to be an inadequate installation process?

    Hi Mylenium,
    I tried to reply to your message by email but got this from the Mail Delivery System:
    <[email protected]>: host
        10.122.65.81[10.122.65.81] said: 553
        <[email protected]> address unknown. (in
        reply to RCPT TO command).
    The following was my message, and I attached the Install Log: (I don't know how to send you the Log from here).
    Thanks for your help!
    Thank you for your response. I meant no offence, but I think the system could be set up in such a way as to better assist the 1% who have problems.
    I am running Windows 7 Home Premium on a desktop with these specs:
    AMD Athlon II x4 640 processor 3.00GHz
    RAM: 4.00GB
    64 bit OS
    Graphics: Nvidia quadro FX 580
    I have CS5 installed and LR4.1
    The install log is attached.
    Below is the error report:
    Exit Code: 6 Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF012, DF037 ... WARNING: DF054, DS013 ...   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 17 error(s), 6 warning(s)    WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no upgrade/conflict relationship with it.  WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no upgrade/conflict relationship with it.  WARNING: DS013: Checking payloads upgrade/conflict relationships : Failed with code 1  ----------- Payload: {3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 -----------  ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles\1.0". Error 145 The directory is not empty.(Seq 288)  ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\LensProfiles". Error 145 The directory is not empty.(Seq 289)  ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\CameraProfiles\Camera". Error 145 The directory is not empty.(Seq 712)  ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw\CameraProfiles". Error 145 The directory is not empty.(Seq 955)  ERROR: DF037: Unable to delete directory "C:\ProgramData\Adobe\CameraRaw". Error 145 The directory is not empty.(Seq 956)  ----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------  WARNING: DF054: Unable to read Adobe file version for file path 'C:\Program Files (x86)\Common Files\Adobe\Color\Profiles\Recommended\USWebCoatedSWOP.icc'(Seq 16)  ERROR: DF012: Unable to find file(Seq 16)  ERROR: DF024: Unable to preserve original file at "C:\Program Files (x86)\Common Files\Adobe\Color\Profiles\Recommended\USWebCoatedSWOP.icc" Error 32 The process cannot access the file because it is being used by another process.(Seq 16)  ERROR: DW063: Command ARKDeleteFileCommand failed.(Seq 16)  ----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------  WARNING: DF012: File/Folder does not exist at C:\Users\Owner\Desktop\Adobe CS6 Design and Web Premium\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)  ----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------  WARNING: DF012: File/Folder does not exist at C:\Users\Owner\Desktop\Adobe CS6 Design and Web Premium\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)    ERROR: DW050: The following payload errors were found during install:  ERROR: DW050:  - AdobeColorCommonSetCMYK CS6: Install failed  ERROR: DW050:  - Adobe Illustrator CS6 Core (64 Bit)_AdobeIllustrator16en_GBLanguagePack_x64: Install failed  ERROR: DW050:  - AdobeIdeaPluginCS6 x64: Install failed  ERROR: DW050:  - Adobe Illustrator CS6 Core: Failed due to Language Pack installation failure  ERROR: DW050:  - Adobe Illustrator CS6 Core (64 Bit): Failed due to Language Pack installation failure  ERROR: DW050:  - AdobeIdeaPluginCS6: Install failed  ERROR: DW050:  - Adobe Illustrator CS6 Core_AdobeIllustrator16en_GBLanguagePack: Install failed  ERROR: DW050:  - Adobe Illustrator CS6 Support32: Install failed  ERROR: DW050:  - Adobe Illustrator CS6 Support: Install failed  ------------------------------------------------------------------------------------- 

Maybe you are looking for